Spl repair to bldg NO P-15 J and T-12 under AGE B/R-II, GE Gurdaspur.

Amount

S&F in repair coloured pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick having tensile strength of 550 Mpa as in roof covering/ clading to wall, fixed with self tapping screws all as specified and directed by Engineer-in-Charge.

S&F in repair coloured pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick having tensile strength of 550 Mpa as in ridge and gutter, fixed with self tapping screws all as specified and directed by Engineer-in-Charge.

S&F 12mm thick perforated particle board/ tiles for insulation and accoustic purposes 60x60cm in size, fixed with nails to frame work or with staples on snap grid complete all as specified and directed by Engineer-in-Charge.

S&F for anodised aluminium snap grid 600mm x 600mm frame work incl hangers 6 mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size, 60mm long and expansion hold fasteners 12.5mm dia 40mm long for false ceiling complete all as specified and directed by Engineer-in-Charge.

Dismantling structural steel work including doors, gates etc complete all as specified and directed by Engineer-in-Charge.

S&F for roof trusses (framed), purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc using Fe 410-W (Gde E-250) quality A complete all as specified and directed.

S&F perfex sheet/ acrylic sheet 5mm, fixed with screws to existing frame or provide MS frame at height exceeding 9.00m in workshop all as specified and directed by Engineer-in-Charge.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide, zinc chrome primer complete all as specified and directed by Engineer-in-Charge.

Roughing the surface of old concrete floor picking sweeping clean and washing down with water to remove dust/ mud etc and brushing with neat cement slurry @ 3kg/ sqm all as specified and directed by Engineer-in-Charge.

M&L for cement concrete 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate) as in roof padding averaging thickness of 50mm complete all as specified and directed by Engineer-in-Charge.

M&L for 10mm thick cement plaster in CM (1:4) using water proofing compound on RCC roof slab including cleaning of existing surface complete all as specified and directed by Engineer-in-Charge. Note :- WPC shall be measured and paid separately under relevant items.

S&F for 3mm thick reinforced with polyster non wove fabric APP modified membrane of weight not less than 3.0 kg/Sqm torch shield using gas burner including 150mm side/ laps over a tack coat of industrial bitumen 85/25 @ of 1.2kg/sqm and bitumen primer @ 0.3 kg/Sqm in sunken portion complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new surface of any description wood, steel, iron, concrete, brick, stone etc exc 10cm inwidth or girth and applying two coat of heat resisting paint over one coat of priming paint plaster coat complete all as specified and directed by Engineer-in-Charge.

S&F in repair 110mm bore PVC (SRW) ISI mnarks pipes single socketed in any length with rubber ring joints fixed to wall or floor incl dismantling of cast iron, PVC or SGSW drain pipes, jointed in cement mortar and taking out of trenches, if required all as specified and directed by Engineer-in-Charge.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeing 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement or clolured cement to match over and including 15 mm thick screed bed in CM 1:6 and dismantling of floor hearth or wall tilling including cement mortar bedding, removing rubbish off premises complete all as specified and directed by Engineer-in-Charge.

M&L for light coloured vitrified tiles 10mm thick (square/ rectangular) polished area not exc 0.36 sqm, in floor etc set and jointed in neat cement slurry over and pointed with coloured cement to match the shade of tiles over 15mm thick screed/ bedding layer in CM (1:6) complete including dismantling the existing tiles and disposing the rubbish off the permises all as specified and directed by Engineer-in-Charge.

M&L for light coloured vitrified tiles 10mm thick (square/ rectangular) polished area not exc 0.36 sqn, in floor etc set and jointed in neat cement slury over and pointed with coloured cement to match the shade of tiles and rendering 10mm thick in CM (1:4) on fair surfaces for laying tiles as in skirting and dado etc complete including dismantling the existing tiles and disposing the rubbish off the permises all as specified and directed by Engineer-in-Charge.

Taking down chowkhats with shutters (without taking off shutters from the frame) area not exceeding 1.5 Sqm each, and removing from site complete all as specified and directed.

All as per Srl item No 18 here-in-before but area exceeding 1.5 Sqm but not exceeding 4 Sqm each and removing from site complete all as specified and directed.

S&F of 125 x 60 mm size pressed steel frames 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete as specified and directed.

S&F for 35mm thick 2nd class hard wood glazed and skelton shutters as in doors open rebated and prepare to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I, section 8, clause 8.24 (a) complete all as specified and directed by Engineer-in-Charge.

S&F of 35mm thick modular designer flush doors, solid core construction, with block board core and pre-lamination on both sides complete all as specified and directed.

M&L for stainless steel curtain rod 25mm dia steel pipe cutting into length as required at site with and incl stainless steel end caps/knobs and stainless steel wall mounting brackets, complete all as specified and directed.

M &L for box type steel window with 80 x 40 x1.25 mm MS tubular frame with side hung shutters (double shutter for glass and gauze) without sash bars jointed together with and including, grill using 12mm square bar @ 10 cm C/C including , box type hinges with steel handle and steel pag stay complete glazing bars doweled and welded complete all as specified as directed. (Note:- (a) The Glass/gauze shall be measured and paid separately. (b) Side hung Z-Section shutter shall be of size 20mm x 20mm x 25mm and 3.0mm thick).

S&F for mild steel frame work as in door or gate of angle or other section with gusset plates, rails, braces etc complete drill for fixing of steel sheeting or other covering door etc conferming to Fe-410 W Gde-E-250 quality B complete all as specified and directed.

S&F for 100mm butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and directed.

S&F for 150 mm long aluminium handles cast type complete all as specified and directed.

S&F for 200 mm long aluminium tower bolts of extructed section complete all as specified and directed.

S&F for 250 mm aluminium, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engineer-in-Charge.

S&F in repairs floor door stopper 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 for internal surface of wall and finished the surface even and smooth without using extra cement including taking down existing plaster racking out & scrubing down with water complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 for external surface of wall and finished the surface even and smooth without using extra cement including taking down existing plaster racking out & scrubing down with water complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coats of oil bound distemper on newly plastered surface of internal wall, complete all as specified and as directed by Engineer-in-Charge.

M&L for prepration of newly plastered/un plastered surfaces of wall and applying two coats of cement base paint of shade as approved complete all as specified and directed by Engineer-in-Charge.

M&L for prepration of old plastered surfaces of wall and applying two coats of cement base paint of shade as approved complete all as specified and directed.

M&L for preperation of old plastered surface and washing rubbing down of distempered and painted surface including complete removal of existing treatment and applying two coats of oil bound distemper over a coat of putty on old plastered surface of internal wall complete all as specified and as directed.

Demolition of cement concrete (un-reinforced ) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for 75 mm thick cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) finished even and smooth without using extra cement as in plinth protection including forming joint to full depth at every 3.0m interval and at every change of direction and filled mixture of bitumen and sand (1:3) by weight complete all as specified and directed by Engineer-in-Charge.

M&L for 75mm thick plain cement concrete (1:4:8) type D-2 ( using 40mm graded crushed stone aggregate) as in sub base of floor, path etc complete all as specified and directed.

M&L for factory made PU coated, machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with coloured pigment made of PVC moulded (or rubber mould) with vibrating system, with and including 50mm thick sand cushioning complete all as specified and directed. Note :- The cost of sand cushion is included in the rate quoted by the bidder.

M&L for plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in copping side benching complete all as specified and directed.

Dismantling framed work timber scantlings 40 Sqcm and over in section, in any position complete all as specified and directed by Engineer-in-Charge.

S&F of exposed frame false ceiling system with GI powder coated grid consisting of interlocking arrangement of main T runner of 15mm size, suspended at 1200mm C/C and cross T runner of 15mm size suspended at 600mm C/C supported by 1.5mm dia GI wire from roof/ slab/ truss incl wall/ perimeter runner/ channel of 15mm size with and incl 4mm thick pre-painted non asbestos fiber reinforced cement board (e-board), designer type of size 595x595mm, duly fixed in ceiling frame work complete all as specified and directed by Engineer-in-Charge.

E/M PORTION Taking down carefully aluminium/copper point wiring for light, fan, bell, socket of point complete fittings such as switches, ceiling roses, pendents, regulator socket etc complete at site and making goods disturbed surfaces of walls, floors etc.

Point wiring with PVC insulated and PVC unsheathed multistranded FRLS copper conductor cable of size 1.5 Sqmm including concealed PVC conduit fittings and making good to the disturbed surfaces with continuous earth wire of copper 1.5 Sqmm dia to common earth including provn of 3mm thick plastic laminated sheet of appropriate size and fixing to CI/MS boxes for mounting of accessories like surfaces sockets and regulators etc. complete all as specified for One light / Fan/ bell point controlled by one way switch complete all as specified and directed.

All as per Srl item No 45 here-in-before but one 5 pin socket outlet 5 amps on same board.

All as per Srl item No No 45 here-in-before but 5 amps socket outlet on independent board.

All as per Srl item No.45 here-in-before but wiring with 2.5 Sqmm FRLS copper wire including one earth wire 2.5 sqmm of copper for 15 Amps 3 pin socket outlet .

M&L for sub main wiring with two single core multi stranded PVC insulated, unsheathed copper conductor of grade 1100 Volt, FRLS cable of size 6 sqmm (Red for phase and black for neutral) and including electrical grade PVC conduits of desired colour not less than 1.2mm thick and 32mm wide and 6 sqmm multistranded copper conductor cable PVC unsheathed green coloured for earthing with complete accessories duly complete and taking down old unsedrviceable wiring complete all as specified and directed. Note :- (a) Cost of making good the disturbed surface plastering/ filling putty alongwith matching with the existing colour with MES approval make of distemper is deemed to be included in the quoted rate by contractor. (b) Three run of cable alongwith PVC conduit together shall be measured as single run.

S&F switch piano flush type single pole one way 5 amps.

S&F socket outlet 3 pin 5 amps flush type.

S&F switch flush type 15 amps single pole one way

S&F socket outlet 3 pin 15 amps flush type

S&F in replacement surface mounting universal batten housing made of powder coated CRCA sheet suitabe for and upto 1 x 18/ 20W LED tube rod and taking down old unserviceable fitting complete all as specified and directed by Engineer-in-Charge.

S&F LED tube light 20W ultra bright LED polycarbonate tube light with very high efficacy suitable for fitting into tube light batten fitting complete all as as specified and directed by Engineer-in-Charge.

Taking down carefully ceiling fan complete fittings at site, removing fans are deposting to MES store yard and refixing after completeion of work at the site.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose to connector to fan complete including replacement of one pair of canopy complete all as as specified and directed by Engineer-in-Charge.

S&F in replacement of fan regulator electronic type 5 step 100 watt, 240 volt and connecting complete all as as specified and directed by Engineer-in-Charge.

S&F for lamp holder PVC body angle type including 9 watt LED bulb polycarbonate body complete all as as specified and directed by Engineer-in-Charge.

M&L for ceiling rose, surface bakelite 65 x50mm three terminal.

S&F in replacement GI pipe bracket made out of GI pipe light grade 32 mm dia and bent to shape 1.5m long, MS clamps made out of MS flat iron of size 32mm thick with nut & bolts, washers complete including dismentling the existing GI pipe bracket and drilling of holes for nuts & bolts etc complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixed in repair sheet metal enclosure for DB’s when MCB’s to be used of 240 volt 8 way with 200 amps rated bus bar SPN double door complete all as specified and directed. (Note :- All the connection of incoming and out going wire in MCB will be made with thimble with suitable size).

S&F in repair MCB single pole 6 amps to 32 amps complete all as specified and directed.

All as per Srl item No 64 here-in-before but single pole and neutral 40-63 amps.

Supply and fixing aluminium conductor standrad PVC, service wire of size 6 sqmm, 2 core complete all as as specified and directed by Engineer-in-Charge.

A Schedule of Credit for old/unserviceable demolished/ dismantled items has been catered for in the tender to the tune of Rs. 48854. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit.

AAR KAY BEE ENTERPRISES (BID ID -3271524)