WELCOME MAINT AND CERTAIN MISC B/R AND E/M WORKS MD ACCN AT MIL STN RATNUCHAK UNDER GE KALUCHAK

Amount

Complete removal of the existing treatment of any description, washing rubbing down and stopping of distempered and painted surfaces of ceiling and applying 3 mm thick wall care putty, primed with alkali resistant priming paint and two coats of oil bound distemper complete all as specified and as directed.

Preparation of old plastered or un-plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts, trading oil and greasy spots, and applying one coat of oil bound distemper on ceiling complete all as specified and as directed.

Preparation of old plastered or un plastered surface including brooming down or steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts, trading oil and greasy spots, and applying one coat of oil bound distemper on walls complete all as specified and as directed.

Complete removal of existing treatment of wall surfaces including brooming down or steel wire brushing, scrapping down smoke soot , mould, moss and efflorescent salts, trading oil and greasy spots, and applying two coats of oil bound distemper on walls over a coat of wall care putty of minimum thickness 1mm complete all as specified and as directed.

Preparation of old plastered or un-plastered surfaces of walls, chajjas, facias, parapets including brooming down or steel wire brushing, scraping down smoke soot, mould, moss and efflorescent salts and trading oil and greasy spots, and applying one coat of cement base paint on walls complete all as specified and as directed.

Preparation of old painted wooden surface of any description, over 10 cm in width or girth not other wise described, and applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparation of old painted steel surface of any description, over 10 cm in width or girth not other wise described, and applying one coat of synthetic enamel paint complete all as specified and as directed.

Complete removal of of existing treatment from wall, finishing the undulated surface by cement putty and applying two coats of weather proof paint over a coat of primer using mechanical vaccume machine. Note : (i) Preparation of surfaces and external weather proof paint to be carried out mechanically. (ii) The work will be carried out upto triple storey buildings and the cost of scaffolding is also included in this item. Make :- Berger Paint, WeatherCoat Long Life Flexo/ Nerolac Paints Excel Total/ Asian Paint APex Ultima.

Taking down cement plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Rendering 15 mm thick in cement mortar 1:4 on brick work or concrete surfaces of walls mixed with water proofing compound ISI marked @ 3% by weight of cement as per manufacture instructions furnished even in smooth without using extra cement complete all as specified and as directed. Note : (i) Preparation of surfaces and external weather proof paint to be carried out mechanically. (ii) The work will be carried out upto triple storey buildings and the cost of scaffolding is also included in this item.

Rendering 15 mm thick in cement mortar 1:6 on brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 5 mm thick using Cement Mortar (1:3) on ceiling surfaces complete all as specified and as directed.

Preparation of new plaster surfaces of walls and applying two coats of oil emulsion distemper over a coat of "Wall care putty of minimum thickness 1mm" on walls complete all as specified and as directed.

Applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces on walls complete all as specified and as directed. Note : (i) Preparation of surfaces and external weather proof paint to be carried out mechanically. (ii) The work will be carried out upto triple storey buildings and the cost of scaffolding is also included in this item. Make :- Berger Paint, WeatherCoat Long Life Flexo/ Nerolac Paints Excel Total/ Asian Paint APex Ultima.

Applying two coats of OBD using mechanical vaccume machine including preparation of newly plastered ceiling surfaces including one coat of alkali resistant primer complete all as specified and as directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), terrazzo toping and rubbish off the premises complete all as specified and as directed. .

Demolition of (un reinforced) cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

25 mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) as in levelling course of floor etc complete all as specified and as directed.

Coloured joint free non skid ceramic tiles 400 x 400 x 7 to 8 mm thick in floors laid over and including 15 mm thick screed bed or bedding layer of cement mortar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles complete all as specified and as directed. (No extra cost is allowed for removing and re-fixing and necessary cutting of door etc if may during execution of work)

Coloured glazed ceramic tiles 400 x 400 x 7 to 8 mm thick on vertical surfaces of walls including 10mm thick backing coat of cement mortar 1:4 as in dado, skirting, riser of steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and as directed. (No extra cost is allowed for removing and re-fixing and necessary cutting of door etc if may during execution of work)

Vitrified tiles, light shade 600 x 600 x 9 to 10 mm thick, polished in floors laid over and including 15 mm thick screed bed or bedding layer of cement mortar 1:4, set and jointed in neat cement slurry and pointed in white cement to match the colour of tiles, complete all as specified and as directed. (No extra cost is allowed for removing and re-fixing and necessary cutting of door etc if may during execution of work)

Vitrified tiles, light shade 600 x 600 x 9 to 10 mm thick, polished on vertical surfaces of walls including 10mm thick backing coat of cement mortar 1:4 as in dado, skirting, riser of steps etc., set and jointed in neat cement slurry and pointed in white cement to match the colour of tiles, complete all as specified and as directed. (No extra cost is allowed for removing and re-fixing and necessary cutting of door etc if may during execution of work)

Coloured non skid ceramic tiles 300x300x7to 8 mm thick laid in floor over and including 15mm thick screed bed or bedding layer of cement 1:4 set and jointed in neat cement slurry and pointed in white cement to match the colour of tiles complete all as specified and as directed. (No extra cost is allowed for removing and re-fixing and necessary cutting of door etc if may during execution of work)

Coloured glazed ceramic tiles 450mm x 300mm x 7mm thick on vertical surfaces of walls including 10 mm thick backing coat of cement mortar 1:4 as in dado, skirting, riser of steps etc., set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, complete all as specified and as directed. (No extra cost is allowed for removing and re-fixing and necessary cutting of door etc if may during execution of work)

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exceeding 1.5 sqm & not exceeding 4 sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) not exceeding 1.50 Sqm each complete all as specified and as directed.

Taking down shutter of any description, exceeding 1 square metre and not exceeding 2 square metre each, complete all as specified and as directed.

Taking down shutter of any description, not exceeding 1 square metre each, complete all as specified and as directed.

30mm thick, flush shutters, soild core construction, with block board core and plywood face panels both faces is covered with decorative face sunmica with lipping/frame to match and complete all as specified and as directed.

Solid PVC door/cup board frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening complete all as specified and as directed.

Factory made solid panel PVC door/cup board shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, suippling and fixing in the frame at site complete all as specified and as directed.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm (Double rebate ) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and supply & fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed. . Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and supply & fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

S&F pressed steel frames for door (Factory made) out of 1.25mm thick black MS sheet, with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate holdfast etc complete size of frame 125x60mm including bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick flat iron projection 10cm on either side including one shop coat of red oxide primer complete all as specified and as directed.

S&F pressed steel frames for door (Factory made) out of 1.25mm thick black MS sheet, with one or more rebates including necessary fixing lugs, butt hinges, lock strike plate holdfast etc complete size of frame 105x60mm including bottom of each chowkat to be welded with 2 Nos 25x25x3mm thick flat iron projection 10cm on either side including one shop coat of red oxide primer complete all as specified and as directed.

PCC (1:3:6) type C-0 (12.5 mm graded crushed stone aggregate) filling back of chowkats complete all as specified and as directed.

Box type steel windows for desert coolers comprised of tubular frame and shutters made out of 1.25 mm thick MS sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (including ss wire mesh and 3mm glass panes) with side hung shutters with MS handles and MS peg stay dovetailed or welded incl 02 Nos, MS Tower bolts 150 mm long for each leaf and 8 mm square bar grill / guard bars at spacing as shown on Drg welded to MS flat iron frame work ,including other fittings ,hinges ,MS handles ,tarred hold fasts ,PCC blocks for hold fasts etc all as shown on Drg No CEPZ/C-TD /032/13 sheet 1/2 to 2/2, complete all as specified and as directed.

Box type steel windows comprising of tubular frame and shutters made out of 1.25mm thick MS steel tube, factory made, with double side shutters wire gauged shutter and glass glazed shutter (including ss wire mesh and 3mm glass panes) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150 mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to F1 frame work, including other fittings, hinges, handles tarred hold fasts PCC blocks etc all as shown on Drawing No CEPZ/TD-354/09 sheet 1/3 to 3/3 complete all as specified and as directed.

Steel ventilator with top hung shutter including 8mm suare bar grill/guard bars hinges , steel peg stay complete all as specified and as directed.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and supply & fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.

35 mm thick single piece factory made wire gauge shutter and incl of wire cloth(stainless steel & aluminium XPM) manufacturing by PVC sheets printed 5 mm thick on both side on frame made out of M.S. tube 19 SWG ,size 19x19 mm complete in all respect with lock rail & beautified all around fixed with PVC solvent cement complete as per Drg No. CEPZ/TD-378/Sheet 1/1 dated 27/12/2011 complete all as specified and as directed.

Factory made glazed and skeleton shutters 35mm thick, of second class hard wood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and as directed.

Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45X70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and supply & fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

Providing capillary rise treatment of walls with first (base) coat of Berger HS Latex plus @ 0.3 Kg/sqm or equivalent and then applying second & third coats of Berger Latex Shield 2K @ 3Kg/sqm or equivalent complete all as specified and as directed.

Aluminum (die cast) body door closer hydraulically designation No 3 Universal type suitable for door shutter of 851 to 1000mm in width and weight 61 to 80 Kg, fixed in repairs, complete all as specified and as directed.

18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame workincluding 3 mm thick teak wood beading in cup bords/kichen cabinets etc complete all as specified and as directed.

40 mm wide flaps Continuous (piano) hinges , mild steel bright finish or electrogalvanised as in cup boards, kitchen cabinat , etc complete all as specified and as directed.

40mm dia , Cupboard knobs fixed with nut , screw and washer of mild steel , bright finished complete all as specified and as directed.

Hasp and staple 150 mm safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

Aluminium handles cast type, anodised, 150mm size complete all as specified and as directed.

Aluminium alloy, anodised, sliding door bolt 300mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

Aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt, complete all as specified and as directed.

Mild steel stove enameled helical door spring 150 mm size fixed to pressed steel frame/MS frame/wooden chowkhats including necessary welding work etc (if required) complete all as specified and as directed.

Butt Hinges medium weight cold rolled mild steel of size 100 mm complete all as specified and as directed.

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with 2nd class soft wooden beadings complete all as specified and as directed.

Hacking out old broken glass, any thickness,size,quality or description from wooden/steel frames glazed with putty or fixed with beads complete all as specified and as directed.

3mm thick plain sheet glass, ordinary quality, and glazing with oil putty or wooden beads, in square not exceeding. 0.5 Sqm each complete all as specified and as directed.

3 mm thick figured glass, pin head type and glazing with oil putty or wooden beads, in square not exceeding. 0.5 Sqm each complete all as specified and as directed.

Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections including cleaning for refixing complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections including cleaning for refixing complete all as specified and as directed.

Cutting chasis, pinning in, brick walls, and making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades and cutting chasis for concealed water tubing or concealed conduit wiring, etc making good cuttings not exceeding 10 cm girth complete all as specified and as directed.

Galvanised steel water tubing, 15 mm bore, medium grade, with all fittings, fixed complete to walls, ceilings or laid in floors complete all as specified and as directed.

Galvanised steel water tubing, 20 mm bore, medium grade, with all fittings, fixed complete to walls, ceilings or laid in floors complete all as specified and as directed.

Fancy type CP Bib tap 15 mm long body of cast copper alloy with capstan head, fancy type handle, screwed down for iron pipe, fixed in repairs, complete all as specified and as directed.

15mm pillar taps, fancy type cast copper alloy, with capstan heads, fancy type chromium plated, screw down high pressure with long screwed shanks and fly nuts, screwed for iron pipes ,fixed in complete all as specified and as directed.

Fancy type, chromium plated angle valve 15 mm of cast copper alloy with crutch handle, screwed down for iron pipe ,fixed in repairs complete all as specified and as directed.

Fancy type, chromium plated Stop cock 15 mm of cast copper alloy with long shank and cup (concealed type), screwed down for iron pipe ,fixed in repairs complete all as specified and as directed.

Fancy type chromium plated shower rose of cast copper alloy with swivel joints, 125 mm dia including 300 mm long shower arm and fixing to steel pipe or union fixed in repairs complete all as specified and as directed.

Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe, fixed in repairs complete all as specified and as directed.

Brass CP wash hand basin mixer for mixing hot and cold water screwed down for iron pipe, fixed in repairs complete all as specified and as directed.

Toilet paper holder of brass CP, fixed to walls with chromium plated (CP) brass screws fixed in repairs complete all as specified and as directed.

CP jet spray including CP flexible pipe for EWC fixed complete all as specified and as directed.

CP health faucet including CP flexible pipe for EWC fixed complete all as specified and as directed.

PVC connection 15 mm size, 600 cm long fitted with PTMT nuts with washer on both ends, fixed to 15 mm bore iron pipes complete all as specified and as directed.

PVC bathroom cabinet made out of ABS material of size 45cm x 60cm complete all as specified and as directed.

S&F in repair Vitreous china wash hand basin, white, flat back, size 580 x 450 mm incl C.I. brackets,CP coupling and 32 mm dia PVC waste pipe, including cutting for and pinning in ends of brackets or erecting stand etc., complete all as specified and as directed.

Vitreous china wash down water closet pan (pedestal pattern) white complete including P or S trap, incl seat cover and fixing of flushing cistern, brackets, flushing pipe etc fixed in repairs complete all as specified and as directed.

Vitreous china one piece square ceramic European type water closet with seat cover and twin flush fitting including necessary traps and connection to drain and flushing pipe etc of size 520x350x410 mm etc fixed in repairs complete all as specified and as directed.

PVC valve less syphonic action type flushing cistern 10 litres capacity, low level, white with inlet ball valve float and handle including brackets fixed in repairs complete all as specified and as directed.

110 dia PVC soil waste , and vent pipe in any length with rubber rings joint fixed to wall/laid in floors complete all as specified and as directed. including demolition old pipes of any description

All as per Srl item No 82 above but 75mm dia ditto complete all as specified and as directed.

Repairs 110 mm dia PVC (SWR) bends, of and radius with access door complete all as specified and as directed.

All as per Srl item No 84 above but 75mm dia ditto complete all as specified and as directed.

110 mm dia PVC vent cowl fixed in repairs complete all as specified and as directed.

PVC (SWR) floor trap 75mm dia plain with grating including jointing to waste pipe fixed in PCC 1:2:4 type B1 complete all as specified and as directed.

PVC (SWR) branch piece (Single Y etc) equal or unequal 110 mm dia with access door complete all as specified and as directed.

All as per Srl item No 88 above but 75mm dia complete all as specified and as directed.

PVC (SWR) branch piece (Single T extra) equal or unequal 110 mm dia with access door complete all as specified and as directed.

All as per Srl item No 90 above but 75mm dia complete all as specified and as directed.

20 mm dia powder coated curtain rod in one length per door/window, fancy type (engraved rods) designed & colour as per approved by GE, provided with side golden globe and bracket on each end, fixed in repairs, complete all as specified and as directed.

Preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Soap dish,, fixed to plugs with chromium plated brass screws, fixed in repair complete all as specified and as directed.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed in repair complete all as specified and as directed.

Plastic water closet seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors etc laid, bedded and painted in any mortar complete all as specified and as directed.

Granite (of any type) 15-18 mm granite stone slab thick in floors or on cooking platforms etc, set , jointed pointed with grey cement slurry mixed with pigments to match the shade of the slabs including rubbing & polishing laid over and including 15 mm thick screed bed in cement mortar 1: 6 complete all as specified and as directed.

Sheet glass corner shelf assembly (set of 3) consisting of 5.5mm thick sheet glass with chromium plated bracket guard and railing fixed in repair complete all as specified and as directed.

Carrying out Water proofing of Sunken Slabs in following steps:- (i) The substrate to be rendered sound, free from debris by removing all weak layers and cleaned thoroughly with water. Pipe penetration through the RCC slab must be sealed using Berger HS RepairO or equivalent, around the perimeter of the pipe. (ii) Intersection of base slab with wall must be provided with a 50 mm fillet using Berger HS Latex plus or equivalent modified mortar with a bonding coat of Berger HS Latex plus or equivalent modified cement slurry. (iii) Any surface defects, such cracks, surface honeycombing depressions, etc., to be repaired as under :- (a) The work pertaining to water proofing shall be executed from authorized applicator through manufacturer of which the material proposed to be used by the contractor and approved by GE. (b) Any surface cracks shall be chased open into a ‘V’ groove, and filled with Berger HS Crackfill or equivalent paste – a ready to use flexible paste. (c) All depressions, unevenness, surface honeycombing to be repaired using Berger HS Latex plus or equivalent modified polymer mortar with a bonding coat of Berger HS latex plus or equivalent modified cement slurry. (iv) On the prepared concrete substrate, apply a primer coat of Berger HS Latex plus or equivalent modified cement slurry with Berger Latex plus (or equivalent) : Water at a ratio of 1:4 and required quantity of cement, after pre-wetting the substrate. (v) Dampen all surfaces immediately ahead of Berger Latex shield 2K or equivalent application. Whilst the surface is still damp from saturation (S.S.D), apply two coats of Berger Latex shield 2K or equivalent modified waterproofing coating on the entire area over the cement sand screed. Second coat shall be applied after 6-8 hrs of application of previous coat and in the direction right angle to the previous coat. The waterproofing coating should be taken to a height of minimum 600 mm above the finished floor level on the vertical surface. (vi) Apply Glass fiber whilst the first coat is wet and then apply second coat. (vii) 15 mm thick plastering in CM 1:4 (with WPC ) Note : It is essential to cure Beger HS Latex Sheild 2K or equivalent immediately after application (minimum 6-8 hrs drying ) for a minimum of 3 to 5 days to ensure full cement hydration and to minimise cracking

PCC (1:5:10) type E2 using 40 mm graded stone aggregate as in filling and mass concrete complete all as specified and as directed.

Dismantling of AC(Corrugated, semi corrugated etc) sheets in roof coverings including ridges Note. Dismantling will have to be carried out only in area complete all as specified and as directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and as directed.

Pre painted galvalume aluminum zinc coating GI based plain steel sheeting 0.50mm thick of any colour having tensile strength of 550 MPA as in ridge ,gutters etc fixed with self tapping screws complete all as specified and as directed.

Plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in benching, water troughs and the like including form work and finishing all exposed surfaces of concrete, complete all as specified and as directed.

Demolition of brick work or stone boulder masonary built in cement mortar complete all as specified and as directed.

Brickwork with sub class B bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 as in walls etc complete all as specified and as directed.

Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 500 ltrs and S&F 20 mm bore PTMT Ball valve high pressure with exposy coated aluminum rod and high density plastic ball screwed for iron pipe including dismantling of existing water tank of any description .(minimum weight of tank 12.00 kg) complete all as specified and as directed.

Rotational moulded polyethylene water tank (cylindrical vertical closed top) hoisted and fixed in position capacity of tank 1000 ltrs and S&F 20 mm bore PTMT Ball valve high pressure with exposy coated aluminum rod and high density plastic ball screwed for iron pipe.including dismantling of existing water tank of any description .(minimum weight of tank 23.00 kg ) complete all as specified and as directed.

Demolition wall and ceiling boards ( fiber pulp insullation etc ) or insullation boards / slabs, blankets any thickness including cover fillets or snap grid complete all as specified and as directed.

Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.

4mm Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws as in ceiling complete all as specified and as directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings complete all as specified and as directed.

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings complete all as specified and as directed.

PVC hollow profile 12mm thickness design and pattern as approved / directed at site, complete all as specified and as directed.

5mm thick tinted glass as in aluminium door/ window/ ventilator with aluminium hollow beading/ glazing clip (included with shutters) of size 19mm x 17mm made out of 0.70mm thick hollow section weighing not less than 0.97 Kgs/RM including rubber gasket, complete all as specified and as directed.

Anodised aluminium powder coated designer grill of 5-6mm dia of mesh size 50x50mm centre to centre with 25mm flat as per sample kept in GEs office including aluminium beading, complete all as specified and as directed.

Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed in repairs, complete all as specified and as directed.

Taking out carefully copper/aluminium point wiring,Light,fan,socket or power complete with all fitting, fixtures such as switch socket out let, ceiling rose ,holder ,regulator,DBs etc including making good the disturbed surface of wall/floors complete all as specified and as directed.

Taking down distribution boards/wooden board ,switch fuse units,steel enclosures for MCB of any type and removing from site complete all as specified and as directed. .

Taking down ceilling fan/exhaust fans and deposite to MES store yard from site all as specified and as directed by the Engineer in charge.

Taking down Geyser any cap and deposite to MES store yard from site complete all as specified and as directed.

Taking down existing unserviceable submain wiring any size and making good the disturbed surface complete all as specified and as directed.

Point wiring for one light controlled by one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable 1100 Volts grade drawn through and including rigid non metallic PVC concealed conduit (medium grade) of suitable dia along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire, connected to earth dolly and to be terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type for mounting of modular switches, sockets, fan regulators alongwith modular plate etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good disturbed surface complete all as specified and as directed.

All as per item No 124 above but for one fan point controlled by one piano switch complete all as specified and as directed.

All as per item No 124 above but One light point controlled by two way switch complete all as specified and as directed.

All as per item No 124 above but for one bell point controled by one bell push all as specified and as directed.

All as per ser item No 124 hereinbefore but for one 3 pin socket outlet 5 Amp Same board complete all as specified and as directed.

All as per ser item No 124 hereinbefore but for one 3 pin socket outlet 5 Amp independent complete all as specified and as directed.

All as per Item No 124 here-in-before but for one15 Amp 3pin switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLS) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLS) cable for earth continuity wire complete all as specified and as directed.

Modular type switch, one way 6 Amps , 1 module complete all as specified and as directed.

Modular type switch, Two way 6 Amps , 1 module complete all as specified and as directed. .

Modular type switch, one way 16 Amps, 1 module complete all as specified and as directed.

Modular type socket 5 pin, 6 Amps 2 module complete all as specified and as directed.

Modular type socket 5 pin, 6 A/16 Amps 2 module complete all as specified and as directed.

Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed. .

Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings , complete all as specified and as directed.

LED Bulb cool white 10 Watt Elegant design direct fit for easy installation complete all as specified and as directed.

Bell push flush type piano 5 Amp complete all as specified and as directed.

Bell multi music 230 volt ,AC single pole complete all as specified and as directed.

Tube light fitting integrated type suitable for LED 20W indoor decorative aluminium extruded LED batten complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and as directed.

Tube light fitting integrated type suitable for LED 10W indoor decorative aluminium extruded T5 LED batten complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting complete all as specified and as directed.

Factory made epoxy powder coated Distribution board VTPN 6 ways ,415 Volts with metal door (IP-54 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one MCCB as incommer and SP MCBs outgoing complete all as specified and as directed.

Factory made epoxy powder coated Distribution board SPN 12 ways (SPN MCB DB) with metal door (IP-54 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 100 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cale management, top and bottom removable gland plates with Knockouts and suitable for one SPN/DP-MCB as incomer and SP MCBs outgoing complete all as specified and as directed.

MCB SP-06 to 32 Amp,10KA, 240 volts complete all as specified and as directed.

MCB SPN 32 Amp, 240 volts 50Hz AC supply, complete all as specified and as directed.

Modular metal box 2 module complete all as specified and as directed.

Replacement modular metal box 3 module complete all as specified and as directed.

Replacement modular metal box 4 module complete all as specified and as directed.

Replacement modular metal box 6 module complete all as specified and as directed.

Replacement white cover plate with frame suitable for 1 module complete all as specified and as directed.

Replacement white cover plate with frame suitable for 2 module complete all as specified and as directed.

Replacement white cover plate with frame suitable for 3 module complete all as specified and as directed.

Replacement white cover plate with frame suitable for 4 module complete all as specified and as directed.

Replacement white cover plate with frame suitable for 6 module complete all as specified and as directed.

Replacement white cover plate with frame suitable for 8 module complete all as specified and as directed.

MCCB 415 Volt16 KA 4 Pole 125 Amps complete all as specified and as directed.

Single core PVC insulated unsheathed multistanded copper conductor cable 1 Sqmm , 1100 Volts ISI marked drawn through existing conduite complete all as specified and as directed.

Sub main wiring with two single core PVC insulated (unsheathed) multi strand copper conductor FRLS cable of size 6 sqmm and one single core PVC insulated (unsheathed) solid copper conductor FRLS cable of size 6 sqmm as in continuous earth wire drawn into and including concealed PVC conduit medium grade 25mm dia ISI marked complete with fittings and fixings accessories complete and including cutting chases pinning in making good to facing and pointing in using cement moter 1:3 and making good disturbed surface complete all as specified and as directed.

Earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to GI earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dia and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) and pouring extra Clay Soil of qty not less than one cubic meter into the earth pit and also removal of excavated soil not less than 50 mtr from the earthing place all as specified and directed and tested on completion. including testingall complete all as specified and as directed.

LED Bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with suitable size and length of 1.5 sqmm copper conductor with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Exhaust fans complete with blades, and accessories obtained vide srl Item No-121 above with provision of flexiable cable twin core all as reqd at site. complete all as specified and as directed.

Taking down electric energy meter single phase any size or type form the existing site and refixing the same at same place after carrying out necessary repair work in building and making the surface good to match with existing surface complete all as specified and as directed.

Ceiling fans complete with blades, and accessories obtained vide srl Item No-121 above with provision of new Anti suicide Fan Rod (suitable size and length and oiling/greasing of fan with provision of flexiable cable twin core all as reqd at site. complete all as specified and as directed.

Fixing only electric water heater, geyser storage type obtained vide srl Item No122 complete with provision of fixing Nut bolts as required at site complete all as specified and as directed.

M/S ARUN ANAND (BID ID -3367253)

NARESH KUMAR AND COMPANY (BID ID -3375919)

M/S RAJINDER GOODS TRANSPORT CARRIER (BID ID -3367771)

GENESIS INDIA (BID ID -3367852)

M/S VED PAUL MAHAJAN (BID ID -3376272)