Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.2 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹23.9 L+₹1.9 L (8.50%)Rejected-AOC | L2 | Rejected-AOC Rejected due to not being L1 | |
| 3 | L3₹28.3 L+₹6.3 L (28.8%)Rejected-AOC | L3 | Rejected-AOC Rejected due to not being L1 | |
| 4 | L4₹31.4 L+₹9.4 L (42.8%)Rejected-AOC B 1 2 MAHESH NAGAR AMBALA CANTT 133001 HRY | AMBALA CANTT | AMBALA | HARYANA | 133001 | L4 | Rejected-AOC Rejected due to not being L1 | |
| 5 | L5₹38.3 L+₹16.3 L (74.1%)Rejected-AOC | L5 | Rejected-AOC Rejected due to not being L1 |
Tender Value
₹32 L
EMD Value
₹64,000
Closing Date
2 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH UDHAMPUR
GE NORTH UDHAMPUR
GE U(N) 56 2023 24 REPAIR TO BOUNDARY PATHWAY AND CONNECTED ITEMS INCLUDING REPAIR AND CLEANING OF SOAKAGE PIT SEPTIC TANK AND CONNECTED ITEMS AT ENGR REGT AT BN UNDER GE (N) UDHAMPUR
2023_MES_617140_1
GE/U(N)-56/ 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE NORTH UDHAMPUR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE NORTH UDHAMPUR
₹64,000
Yes
16 Oct 2023
4 Sept 2023
4 Oct 2023
4 Sept 2023
2 Oct 2023
18 Sept 2023
Amount
M&L for excavation in post holes (or similar holes) each not exceeding 0.5 cum, in any type soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil complete all as specified & directed by Engr-in-Charge.
M&L for Plain cement concrete 1:4:8 type D-2 as in floors 75mm thick complete all as specified & directed by Engr-in-Charge.
M&L for machine pressed concrete interlocking paver block glossy finish, any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment complete all as specified & directed by Engr-in-Charge.
M&L for Sand cushoning bed (filling under floors) incl spreading levelling watering if required complete all as specified & directed by Engr-in-Charge.
M&L for plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in foudation for fencing post filling, and mass concrete, complete all as specified & directed by Engr-in-Charge.
M&L for dismantling of wrought iron or mild steel work of any decription not otherwise provided for all as spd & dir by Engr-in-Charge.
M&L for demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for complete all as specified & directed by Engr-in-Charge.
M&L for demolition of brick work or stone boulder masonery built in cement mortor including all quoins arches pillars etc complete all as specified & directed by Engr-in-Charge.
M&L for demolition of cement concrete unreinforecement of any description and in any position not otherwise specifically provided for complete all as specified & directed by Engr-in-Charge.
M&L for taking down cement plaster of any description on bricks, PCC block or stone walls, etc. Including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified & directed by Engr-in-Charge.
M&L for half brick work with sub class 'B' brick straight or curved on plan exc 6m mean radius but in cm 1:4 complete all as specified & directed by Engr-in-Charge.
M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius butt in cm 1:4 complete all as specified & directed by Engr-in-Charge.
All as per ser item No 12 here-in-before but except bricks complete all as specified & directed by Engr-in-Charge.
M&L for 15mm thick rendering on fair faces or brick / concrete surfaces in cement mortar 1:4 with using water proofing compund and finishes even and smooth without using extra cement complete all as specified & directed by Engr-in-Charge.
Supply only integeral water proofing compound complete all as specified & directed by Engr-in-Charge.
S&F in repair PVC (SWR) pipe 110mm dia single socket in any length with rubber ring joints fixed in weep holes complete all as specified & directed by Engr-in-Charge.
M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded aggregate as in coping. Kneelers, bed block including necessary from work complete all as specified & directed by Engr-in-Charge.
M&L for two coat of cement base paint over newly plastered surfaces of wall including one coat of primer and preparing surfaces complete all as specified & directed by Engr-in-Charge.
M&L for waling of random rubble masonry built in cement motar 1:6, uncoursed, well bounded, bedded and solidly hearted complete, complete all as specified & directed by Engr-in-Charge.
All as per SI no19 above but except stones complete all as specified & directed by Engr-in-Charge.
M&L for raised pointing to RR masonry in CM 1:4 complete all as specified & directed by Engr-in-Charge.
M&L for providing precast cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone agg) as in PCC bonders set in CM 1:6 complete all as specified & directed by Engr-in-Charge.
M&L for plain cement concrete 1:2:4, B-1 (20mm graded stone aggregate) as in surface channels and drains etc complete all as specified & directed by Engr-in-Charge.
M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection even and smooth with using extra cement complete all as specified & directed by Engr-in-Charge.
M&L for RCC M-25 type B1 1:2:4 (using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified & directed by Engr-in-Charge.
M&L for RCC M-25 Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like including 15 mm th plastering complete all as specified & directed by Engr-in-Charge.
M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified & directed by Engr-in-Charge.
M&L for form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified & directed by Engr-in-Charge.
M&L for mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engr-in-Charge.
M&L for mild steel bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engr-in-Charge.
M&L for mild steel angle iron/flat iron as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc and similar work conforming to Fe-410-0 or Fe-310-0 complete all as specified & directed by Engr-in-Charge.
S&F in repairs galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified & directed by Engr-in-Charge.
S&F in repairs concertina coil punched type (including spike and handle) with 50/51 turns and dia 600mm, having a 2.6mm dia core wire of high carbon spring steel of high tensile strength. The punched tape and core wire are electro galvanized to provide protection against out door exposure. The punched tape is mechanically crimped over the cover wire and then formed into a coil at various parts of the periphery of the coil steel clips cannect the individule turns of the coil to each other so that it opens up like an accordion. The weight of each coil will be 9 Kgs (+- 5%) without packing material and coil length 7 to 8 mtr when opened up. Each coil wound with bituminized Hession cloth for providing protective coating, complete all as specified and directed by Engineer-in-Charge.
M&L for mild steel bolts, purpose made, with hexagonal or square head at one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 30 cm long and dia of neck exceeding 12 but not exceeding 20mm complete all as specified & directed by Engr-in-Charge.
Supply and fixing in repair only for chain link MS galvanised fencing of 50 mm x 50mm size , complete all as specified and complete all as specified & directed by Engr-in-Charge. .
M&L for extra for forming fair finished drain or channel upto 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc. complete all as specified & directed by Engr-in-Charge.
M&L for two coat of synthetic enamel paint on steel surface over one coat of priming with red oxide, zinc chrome of any description over 10 cm in width or girth, notother wise described including preparation of surfaces complete all as specified & directed by Engr-in-Charge.
M&L for preparation of old steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete spray painting complete all as specified & directed by Engr-in-Charge.
M&L for providing Chequred cement concrete tiles 25cm x 25cm x 22 mm thick tiles set , jointed and pointed in neat cement slurry in floors with grey cement and pigment laid over & incl 20 mm thk screed bed in CM 1:4 complete all as specified & directed by Engr-in-Charge.
M&L for providing precast cement concrete 1:2:4, type B0, using 12.5mm graded stone aggregate louvers & jallies, 25mm thick (measured solid), set in cement mortar 1:4, including all mouldings and shuttering in repair complete all as specified & directed by Engr-in-Charge.
M&L for cleaning of blocked Manhole n.exc 1.5 mtr deep and removing all silt, residue sludge both organic and inorganic nature including any type of foreign material and removing waste material/ sludge by using mechanical Equipment deposited out side the ministery of defence land as the area marked by the local muncipal corporation with proper goverment receipt Complete all as specified and as directed, Note :- (i) Work shall be done in foul conditions, necessary precautionary measures/equipments to be adopted by the contractor. (ii) Any type of foreign material and removing waste material/ sludge by using mechanical Equipment depostied out side the ministery of defence land as the area marked by the local muncipal corporation with proper goverment receipt complete all as specified & directed by Engr-in-Charge. (iii) Rates quoted by the contractor shall be deemed to have considered all such contingencies including removal and refixing man hole covers. (iv) Any damage caused during cleaning shall be made good by the contractor to the entire satisfaction of Engr-in-Charge without any extra cost to Govt. (v) The contractor or his authorised rep shall collect the complaint of all blockage or sewage from complaint cell/ Engr-in-Charge on daily basis & all complaint will be rectified by the contractor with in same day & returned the complaint slip after completion of complaint & get receipt from concerned JE/Engr-in-Charge. If he fail to complete the work within same day then recovery will be made @Rs 450 per complaint per day.
All as per item No 41 herein before, but depth of man hole exc 1.5 mtr but n. Exc 3.00 mtr complete all as specified & directed by Engr-in-Charge.
All as per item No 41 herein before, but depth of man hole exc 3.0 mtr but n. Exc 6.00 mtr complete all as specified & directed by Engr-in-Charge.
All as per item No 41 herein before, but gully traps mtr complete all as specified & directed by Engr-in-Charge.
M&L for cleaning of all blockage in sewage line of 100 mm dia of sewer line (i.e branch sewer line, main sewer line, manually or by using mechanical Equipment in any depth and in any situation by way of cleaning / desludging foreign materials as well as blockage of sewage line in between successive manholes mechanically , removing sludge including any type of foreign material and removing waste/sludge by using mechanical Equipment deposited out side the ministery of defence land as the area marked by the local muncipal corporation with proper goverment receipt Complete all as specified and as directed complete alongwith necessary cleaning alongwith ro ds, pumps Bamboos if necessary, chemicals as required and all other required tools all as specified complete all as specified & directed by Engr-in-Charge. NOTE (i) Work shall be done in foul conditions, necessary precautionary measures/ equipments to be adopted by the contractor. (ii) Any type of foreign material and removing waste material/ sludge by using mechanical Equipment depostied out side the ministery of defence land as the area marked by the local muncipal corporation with proper GR complete all as specified & directed by Engr-in-Charge.(iii) Rates quoted by the contractor shall be deemed to have considered all such contingencies including removal and refixing man hole covers. (iv) Any damage caused during cleaning shall be made good by the contractor to the entire satisfaction of Engr-in-Charge without any extra cost to Govt. (v) The contractor or his authorised rep shall collect the complaint of all blockage or sewage from complaint cell daily & all complaint will be rectified by the contractor with in same day & returned the complaint slip after completion of complaint & get receipt from concerned JE/. If he fail to complete the work within same day then recovery will be made @Rs 450 per complaint per day.
All as per item No 45 herein before, but 150 mm dia of sewage line
All as per item No 45 herein before, but 200 mm dia of sewage line
M&L for cleaning of all desludging and dewatering of existing septic tanks/ Soakage wells of any capacity (10 users to 500 users) including inlet and outlet chambers, taking out sludge in any form alongwith all other foreign materials by mechanical equipment or by way of other suitable means, and removing waste material/ sludge etc out side the ministery of defence land as the area marked by the local muncipal corporation with proper goverment receipt Complete all as specified and as directed by Engineer in Charge Note :- (i) Work shall be done in foul conditions, necessary precautionary measures/equipments to be adopted by the contractor. (ii) Any type of foreign material and removing waste material/ sludge by using mechanical Equipment depostied out side the ministery of defence land as the area marked by the local muncipal corporation with proper goverment receipt complete all as specified & directed by Engr-in-Charge. (iii) Rates quoted by the contractor shall be deemed to have considered all such contingencies including removal and refixing man hole covers. (iv) Any damage caused during cleaning shall be made good by the contractor to the entire satisfaction of Engr-in-Charge without any extra cost to Govt. (v) The contractor or his authorised rep shall collect the complaint of all blockage or sewage from complaint cell/ Engr-in-Charge daily & all complaint will be rectified by the contractor with in same day & returned the complaint slip after completion of complaint & get receipt from concerned JE/Engr-in-Charge. If he fail to complete the work within same day then recovery will be made @Rs____450_____ per complaint per day.
M&L for systematically cleaning of blockage of WC Indian, Orrisa pattern or European type and bathroom/ kitchen/WHB Trap including cleaning of Nahani traps/ gully traps/ floor by removing of all the mud/ sludge and getting out including cleaning of SGSW or CI pipe upto Ist manhole and depositing the sludge in a pit of suitable size at a distance not exceeding 50 meters from the gully trap and covering the same with the soil obtained from excavation of pit including all excavations and earth work complete and ensuring high standred of hygiene and sanitation complete alongwith necessary cleaning alongwith rod, pumps Bamboos it necessary, chemicals as required and all other required tools all as specified and day to day directed by Engineer-in-Charge. The quoted rate includes for keeping particular BLOCK under taken once for cleaning, functional for full contract period.) Note :- (i) The contractor should provide 04 people (02 sewage cleaning people & 02 helpers) and his authorised representative shall collect the complaint of all blockage or sewage from complaint cell/ Engr-in-Charge daily & all complaint will be rectified by the contractor with in same day & returned the complaint slip after completion of complaint & get receipt from concerned JE/Engr-in-Charge. If he fail to complete the work within same day then recovery will be made @Rs 300 per complaint per day. (ii) Work shall be done in foul conditions, necessary precautionary measures/equipments to be adopted by the contractor. (iii) Any damage caused during cleaning shall be made good by the contractor to the entire satisfaction of Engr-in-Charge without any extra cost to Govt
M&L for excavation in trenches in any type of soil n.exc 1.5m deep and n.exc 1.5m in depth for foundation or for shafts, wells, cesspits, manholes, pier holes etc, n.exc 10 sqm on plan and n.exc 1.5 mtr in depth and getting out in any type of soil, complete all as specified and directed by Engineer-in charge
M&L for excavation in trenches in any type of soil n.exc 1.5m deep and n.exc 1.5m in depth but n. exc 3.00 mtr in dpth, for foundation or for shafts, wells, cesspits, manholes, pier holes etc, n.exc 10 sqm on plan and n.exc 1.5 mtr in depth but n.exc 3.00 mtr in depth and getting out in any type of soil, complete all as specified and directed by Engineer-in charge
M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm, in any type of soil, complete all as specified and directed by Engineer-in charge
M&L for removing excavated materil (soil) to a distance not exceeding 50m and depositing where directed at a level n.exc 1.50m from the starting point, complete all as specified and directed by Engineer-in charge
M&L for dismantling of cast iron drain pipes, jointed in cement mortar and taking out or trenches (if required), of 100mm dia pipes, complete all as specified and as directed by Engineer-in-Charge.
M&L for demolition and breaking up of drain pipe of 150 mm to 300 mm dia (Salt glazed ware, AC or reinforced concrete) set in cement mortar, complete all as specified and as directed by Engineer-in-Charge.
M&L for concrete bed to drain pipes of bore 150mm including packing under , and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate including necessary shuttering and dupports, complete all as specified and as directed by Engineer-in-Charge. Note :- (i) Thickness of bed belew barrel of pipe-10 cm. (ii) Width of bed :- outer dia of pipe plus 30 cm
All as per item No 56 here in before, but 200 mm dia of pipe.
M&L for reinforced concrete pipe Class NP2 laid and jointed complete with collars internal diameter 150 mm laid in trnches and complete all as specified and as directed by Engineer-in-Charge.
M&L for reinforced concrete pipe Class NP2 laid and jointed complete with collars internal diameter 200 mm laid in trnches and complete all as specified and as directed by Engineer-in-Charge.
M&L for 100 mm bore cast iron soil waste and vent pipes, spun cast, in any length with or without ears, with cement joints laid in trenches or in floors etc. complete all as specified and as directed by Engineer-in-Charge.
M&L for 100 mm bore cast iron soil waste and vent pipes, spun cast, in any length with or without ears, with cement joints but fixed in walls, complete all as specified and as directed by Engineer-in-Charge.
M&L for 75 mm bore cast iton soil waste and vent pipes, spin cast, in any length with or without ears, with cement joints fixed in walls, complete all as specified and as directed by Engineer-in-Charge.
M&L for 50 mm bore cast iton soil waste and vent pipes, spin cast, in any length with or without ears, with cement joints, laid in trenches or in floors etc, complete all as specified and as directed by Engineer-in-Charge.
M&L for cast iron vents (any radius), diminishing pieces or tapers (larger bore measured) for 100 mm bore of pipe, fixed in repair, complete all as specified and as directed by Engineer-in-Charge.
M&L for cast iron oval access door, fixed in repair for 100/75mm bore of pipe, complete all as specified and as directed by Engineer-in-Charge.
M&L for precast cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in cover slabs (for manholes etc). And similar articles with plain faces, set in cement mortar 1:6, complete all as specified and as directed by Engineer-in-Charge.
M&L for reinforced cement concrete slab 1:2:4 type B-1 (using 20mm graded crushed stone aggregate ) as slabs supported on wall, beams etc or similar works, complete all as specified and as directed by Engineer-in-Charge.
M&L for cleaning of CI pipes 100/75mm bore by ridding and inserting jute bag to clean out the residue material and well flushing with water, making functional including removing green vegitation like bushes/grass/trees and any toehr planitation upto satisfication of Engineer in Charge.
M&L for plain cement concrete 1:4:8, type D-2 (40mm graded stone aggregate) as in foundation, filing and mass concrete etc, complete all as specified and as directed by Engineer-in-Charge.
M&L for cutting into exising manholes for connecting new drains (internal dia of pipe n-exc 225 mm), making food to pe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) smooth finsihed, and reforming benching complete all as specified and as directed by Engineer-in-Charge.
M&L for loose filling with broken bricks of guage 80 to 150mm as in soakage pits including cleaning of existing sludge and other foreign materials complete all as specified and as directed by Engineer-in-Charge.
M&L for vitreous china squatting pan 'Orissa' pattern size 580x440mm, white with integral foot rest (Excluding flushing system and flush pipe) with 'P' or 'S' trap all as specified and as directed by Engineer-in-Charge.
M&L for vitreous china wash down water closet pan 'P' or 'S' trap (Pedestal pattern), white with PVC seat cover, including fixing bolts, connection to drain pipe (or out going pipe) and to flushing pipe, antisyponage pipe etc, fixed in reapr complete all as specified and as directed by Engineer-in-Charge.
M&L for PVC (SWR) bens and radius, for 110mm bore of pipe, fixed with rubber ring joint, fixed in repair, complete all as specified and as directed by Engineer-in-Charge.
S&F in repair 10 Ltr PVC valveless syphonic action type flushing cistern low level white with inlet including bracket and 32mm flush pipe of polythylene ball valve, float and handle of low or high density and 15mm PVC connection 450mm long complete all as specified and as directed by Engineer-in-Charge.
M&L for provinding 50mm thick plain cement concrete 1:2:4 type B1 using 20mm graded aggregate as in floor/path finished even and smooth wothout using extra cement, complete all as specified and as directed by Engineer-in-Charge.
S & F repairs vitreous China bowl urinal flat back size of 465x355x265mm whyite (minimum) with grating & union for discharge pipe (excluding flushing cistern) including waste fittings complete all as specified and as directed by Engineer-in-Charge.
S&F PVC (SWR) floor trap plain with grating including jointing with solvent cement, size 75 mm complete all as specified & directed by Engr-in-Charge.
Supply and fixing PVC (SWR) gully trap of size 150 x 110 mm, setting and jointing with solvent cement complete all as specified and as directed by Engineer-in-Charge.
sohtra and co
M/S PARDEEP KUMAR
anil construction co.
M/S SUSHEEL KUMAR Govt. CONTRACTOR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .