REPAIR/ REPLACEMENT TO ROOF TREATMENT, PLASTERING GUNNITING, PERIODICAL SERVICE, ROOF SHEET, CHAJJA FACIA, TRUSSES, JOINERY, PLUMBING AND OTHER CONNECTED MISC WORKS FOR BLDG IN UROLOGY, ORTHO-I , II WART AND OTHER OTM/ MD ACCN IN ZONE-C AT BHDC UNDER

Amount

Demolition of brick work built in cement mortar complete all as specified and directed

M & L for brick work with sub-class B brick straight or curved on plan built in cement mortar 1 : 6 complete all as specified and directed

Taking down cement plaster on brick or stone walls etc. including raking out of joints, hacking for key, scrubbing down with water etc. of any description complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:6 on brick or concrete surfaces of walls, finished the surface fair and even without using extra cement complete all as specified and as directed.

M & L 15 mm thick rendering in cement mortar (1:4), on brick or concrete wall surface, mixed with water proofing compound @ 3% by weight of cement, finished fair & even without using extra cement complete all as specified and as directed.

M & L 10 mm thick rendering in cement mortar (1:3) on ceiling surface, finished even & fair without using extra cement complete all as specified and as directed.

M&L for repairing of spalled concrete form RCC surfaces (Such as ceiling, beams, columnms, parapets, chajjas etc) in the following stage :- (a) Preparation of existing surface like chipping of unsound weak/ loose concrete with electric hammer or manually including tapping all edges, making squre shoulder of cavities etc not exc 50 mm thickness, removal of debrises complete all sqfd. (b) Applying rust remover cum passivators sikka rust off 100 @ 0.20 Kg/ Sqm/each coat as per manufacture instructions to remove rust from existing reinforcement (make : - Sika or equivalent) (c) Mixing and applying two components epoxy resin concrete bonding coat of sikadur (R&B 42)- @0.40 Kg/ Sqm (Mixing proportion as per manufactures instructions) including preparation of surfaces by chipping and thoroughly cleaning of surfaces complete wherever required over New reinforcement (if required) and as directed by EIC (make: sika or equivalent) Reinforcement shall be measured and paid saprately. (d) Applying a prebached one component polymer modified cementious patch repair mortar N, exc 50 mm in layers of 15 mm thick each of product silka mono Top 122 F as per manufacturer instructions to match the existing surface as in sides and soffits etc of slabs, chajjas, fins, facias, parapets, lintels, columns and beams etc complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto 6 storey building including removing of small trees shrubs etc all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed.

M&L 25 mm thick PCC 1:2:4, Type B1, using 20 mm graded stone aggregate, below tiles for levelling of existing surface complete all as specified and as directed.

S&F coloured glazed Vitrified Ceramic tile (Light shade/Double charged/Ultra charged ) 8 to 9 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.72 sqm, in floors, over and including 15 mm thick Screed bed in Cement Morter 1:4 for laying floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the shade of tile complete.

M&L glazed coloured ceramic tiles, 600x300x7mm thick, in vertical surfaces such as skirting/dado etc, set and jointed in cement slurry, laid over & including 10mm thick rendering in cement mortar 1:4, set, jointed and pointed in white cement mixed with colour pigment to match the shade of tile complete all as specified and as directed.

Taking down of chowkhat or frame (without taking off shutter from frame) area not exc 1.50 Sqm each including builder hardware fitting complete all as specified and as directed.

All as per item No 12.00 here in Before but area exc 1.50 Sqm & not exc 4.00 Sqm each complete all as specified and as directed.

Taking down shutters of any description area exc 1.00 Sqm but not exc 2.00 Sqm each leaf including builder hardware fitting complete all as specified and as directed.

S&F powder coated aluminium of various section as required for frame of door/window/ventilators etc with one or more rebates including jointing cleats for fixing etc. & fixed with cadmium plated screw not less then 300 mm C to C & cealing the joints between frames & granite/kota stone with polysulphide sealant as per the manufacture's instructions all as specified and directed.

S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 No) hinges type B-21100mm long (2Nos) suitable handle (1 No) complete all as specified

S & F in Repair powder coated aluminium anodised section 40 x 44mm x14 gauge for aluminium partition wall in wall in panel 1m x1m covered with 5mm thick plain/frosted tinted glass on top half portion and 5mm thick Aluminium Composite Panel fixed in half bottom portion complete all as specfied and directed.

S&F in Repair aluminium Powder Coated grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 104 or equivatent 7.5 mm thick all as specified and as directed by Engr- in- charge.

S&F in Repair brass mortice lock 100mm 4 lever vertical type with duplicate key and handle set complete all as specified.

S&F in RepairDoor closer, Powder Coated aluminium body hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete.

S&F 100mm size, stainless steel butt hinges, fixed with Stainless steel screws complete all as specified and as directed.

S&F 150 mm long Powder Coated aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150 mm long Powder Coated Stainless steel handles, Fancy type and fixed complete all as specified and as directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Demolition of unreinforced cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F mild steel rolled sections, Framed work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, using FE-290 (Gde-E-165) complete all as specified and directed.

S&F in repair, in position Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50 mm thick of approved colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, Chajja etc fixed with self tapping screws as specified, high tensile alloy steel trap sheet having 55 MPA yield strength and zinc (galvanized ) + Aluminium combined, coating of 150 GSM /PM2(AZ-150) of 50mm TCT having top colour coat of regular modified polyester/silicon modified polyester/HDEP polyester of 18 to 20 micron and back coat of 5 to7 micron Epoxy primer fixes, RMR 1040 profile width 1125 mm complete all as specified & as directed.

All as per item No 30.00 here in before but plain sheet as in ridge/valley/gutter complete all as specified & as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and frame work etc complete all as specified and as directed.

S&F Solid PVC Wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame acomplete all as specified and directed.

M&L false ceiling using powder coated grid system of GI modular grid size 600 x 600 mm with runner 38x24x1.5 mm cross tee 25x24x1.5 mm and wall angle 24x24x1.5 mm thick PVC laminated Gypsum tiles of size 600 x 600 mm of different designs with rear side MPL film fitted in the grid, grid system hanges by 6 mm dia GI wire to purlin, trusses; RCC slab of the roof etc. with hold down clips, butterfly clips, height fixtures etc, complete all as specified and directed.

Providing and fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) with semi perforated 12mm thick micro tegular edged false ceiling tiles of size 595 x 595mm of approved texture, design and pattern having moisture content less than 2%, humidity resistance of 90%, NRCO 0.50 to 0.75 as per IS 8225:1987, Nocumbustible as per BS 476 (Part-4) -1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspende on interlocking metal T Grid of hot dipped galvanised iron section of 0.33mm thick (Galvanised @ 120 Grams per sqm including both side) comprising of main T runners of size 15 x 32mm length 3000mm, cross T of size 15 x 32mm length 1200mm and secondary intermediate cross -T of size 15 x 32mm of length 600mm to form grid module of size 600 x 600mm, suspended from ceiling using galvanised mild steel items (galvanising @ 80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape lever adjuster of soze 85x25x2mm, Galvanised iron parimeter wall angle of soze 24 x 24 x 0.40mm of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per sepcifications, drawing and as per direction of Engineer-in-Charge. (Make: DIAMOND/ GYPROC/ USG BORAL/ KNAUF/ ARMSTRONG)

M&L for CEILING PANELS: Pre-fabricated Modular ceiling Panels, 50mm thick, with sloping panels PUF panels, between one sheets of 0.8mm & One Sheet 0.5 mm PPGI (Pre Painted Galvanized Steel) having PUF density of 40kg/m3 with proper supports. Wall panels shall be fixed to the floor with Channels & anchor fastener and interlocked with each other thru CAM LOCK system. Ceiling Panels shall be supported with wall panels thru L type Flashing, CAM LOCK system and ceiling support system as required. Panels including cutouts for lights, pendants, electrical switch sockets etc. Antibacterial & Antifungal paint coating supply and installation of jointless coating: for wall ceiling and corner panels: filling of all joints and cavities with metal epoxy filler and sanded flush to provide a seamless finish including one primer and three coats of antibacterial and anti fungal paint equivalent to a min dry film thickness of 300microns complete all as specified and as directed. (Paint- SKK Japan/ Acro/ DULUX) (PPGI Sheet Make‐ Tata Steel/ Jindal/ JSW. (Make- MHS, CHP, MR)

S&F 10 mm thick toughened frosted glass door shutters of size area exc 1.50 Sqm but not exc 3 Sqm, including necessary floor spring hydraulically regulated, other side fixed on pivot CP fittings and fixtures, CP handles 300 mm long, CP locking arrangement, necessary cutting & holes moulding and fixed including engraving, emblem and lattering not exc 200 mm complete as per directed by Engr-in-Charge.

M & L in repair 20mm thick Granite slab (Z Black) work (table rubbed and polished), in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & half curving the edges of granite stone slab, over and including 15mm thick screed in cement mortar 1:6 including dismantling of old stone slab complete all as specified and as directed.

M&L preparation of new plastered wall surfaces and applying two coats of Oil Bound Distemper over and including a coat of interior primer and including 3 mm thick cement based wall care putty complete all as specified and as directed.

M&L preparation of new plastered wall surfaces and applying two coats of weather proof Exterior emulsion paint of colour & shade as approved (Colour scheme shall be as approved by the GE & user) over and including a coat of exterior primer and 3 mm thick cement based wall care putty complete all as specified and as directed. Make - Asian Apex Ultima or equivalent of make specified in PS.

M&L preparation of new plastered ceiling and applying three coat of white wash complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surface of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paints over and including one coat of red oxide primer complete all as specified and as directed.

S&F in Repair Stainless steel 20 mm dia curtain rod of medium weight including fixing SS brackets, curtain ring @ 7 Nos/RM and decorative end/Latto supports etc complete all as directed.

Supply and fabrication & fixing of Modular wardrobe,cupboards, cabinets, drawers , shelfs, vanity , dressing table including shutters ( depth of 45 Cm up to 70 Cm) etc , all front side, bottom, top, two sides and partions etc made out of 15-18 mm thick HDHMR board and back side made out of 8 - 10 mm thick HDHMR board (Action tesa or equivalent ) with machine pressed 0.5 to 0.8 mm thick fabric/glossy colour laminate on all exposed front side and other sides decorative laminations . All exposed edges of boards with machine pressed edge band 0.8mm from rehau Germanetc (colour of laminates , design & paterns of partations/ etc as approved by GE) including all accessories of fittings - Auto/soft closing hinges for shutters , C/J gola profile for handel less, telescopic channels 18'' / 20'' long , rollers for smooths sliding of drawers, etc as required complete including taking down old wardrobe , cupboard all as specified and as directed. (Note : Overall net size front side including frame will be measured for payment purpose as Sqm and the quoted rate shall deemed to be included for various items as indicated here-in-before)

M & L for washed stone grit plaster on exterior walls in two layers, under layers 12 mm thick cement plaster 1:4 (1 cement :4 coarse sand) following the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer with 15 mm thick cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand:2 coloured marble stone chipping 10mm nominal size) including using Colour pigment & marble powder as required in ground in panels with groove all around as per approved pattern including scrubbing and washing the top layer with wire brushes and water to expose the stone chippings including forming groove of uniform size 15mm wide and 15mm deep as per approved pattern complete all as specified and as directed.

Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal to store

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store

S & F 25 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

S & F 20 mm bore galvanized steel tubing medium grade with all fitting and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings with outer dia 20mm on walls/ceiling or laying in floors complete all as specified and as directed.

S & F in repairs Vitreous china floor mounted WC (Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover , flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed. (Make : Jaquar cat part No. ONS-WHT- 10853S300 UFSM or equivalent in CERA/HINDWARE/PARRYWARE).

S & F in repair Vitreous China wash down water closet pan (pedestal pattern) of size 580 mm white with ‘P’ or ‘S” trap, any pattern including Seat Cover (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S & F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white premier quality, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc complete all as specified and as directed.

S & F in repair 10 Ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

S&F in repair Vitreous China Urinal,Half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with CP Spinkle and including 60mm long brass screws, complete all as specified and as directed.

S&F in repair Vitreous china urinal partition white of size 310 x 700mm complete all as specified and as directed.

S&F in repair 15 mm bore angle stop valves cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed withr iron pipe of union. Make: Hindware/Cera/Prayag.

S&F in repair PVC connection 15mm bore with PTMT nuts of length 600mm

S&F in repair white Wash Basin with Pedestal fo size 560 x 415 x 820 mm complete all as specified and directed. Make : Prayag Cat No : 4602 or equivalent in Hindware/ Cera.

S&F in repair Waste coupling 32mm bore dia of PTMT half threaded for WHB complete all as specified and directed.

S&F in repair 15 mm CP Brass Urinal spreader with Hex heavy quality for urinal complete all as specified and directed.

S&F in repair PVC Urnial Waste Pipe 32 mm dia for urinal complete all as specified and as directed. Make : Prayag Cat No345 or equivalent in Hindware/ Cera.

S&F in repair PVC Solid Waste Pipe 32 mm dia for WHB complete all as specified and as directed. Make : Prayag Cat No : 3271 or equivalent in Hindware/ Cera.

S&F in repair CP Bib Cock 15mm long body with flange complete all as specified and as directed. Make : Prayag Cat No : 6508 or equivalent in Hindware/ Cera.

S&F in repair CP Soap Dish including chromium plated brass screws and plastic cleats complete all as specified and as directed. Make : Prayag Cat No : BA-05 or equivalent in Hindware/ Cera.

S&F in repair 600 mm long CP Tubular Towel Rail 20mm dia complete all as specified and as directed. Make: Prayag/Hindware/ Cera.

S & F in repair 15mm bore WHB Mixture with swan neck complete all as specified & as directed. Make : Prayag Cat No : PIS-02 or equivalent in Hindware/ Cera.

Disconnecting existing tanks, setting aside (or lowering if required) for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc. and hoisting if required reconnecting and re-fixing in position after cleaning repairing etc. capacity of tank up to 500 ltr.

Disconnecting existing tanks, setting aside (or lowering if required) for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc. and hoisting if required reconnecting and re-fixing in position after cleaning repairing etc capacity of tank Exc 500 & Up to 1000 ltr cap

Disconnecting existing tanks, setting aside (or lowering if required) for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes etc. and hoisting if required reconnecting and re-fixing in position after cleaning repairing etc capacity of tank Exc 1000 & Up to 2000 ltr cap

S&F in repair 20 mm bore dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.

S&F in repair 20mm bore dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwedfor iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed.

M&L for rubber moulded Cement concrete chequered tiles 300X300X25 mm thick with grey cement & pigment, set & jointed over and including 15 mm thick screed in cement mortar 1:6 including dismantling of old existing tiles complete all as specified and directed. . (Make : Ultra, Unistone, Duracrete)

M & L for Preparation of old decorated wall surface by scrapping by electrically operated grinder machine/ electric regmal machine and applying one coat of wall care putty on patches work then scrubbing by sand paper to prepare a even surface and applying one coats of OBD of any colour washing down with water complete all as directed.

M & L for preparing the old surface of ceiling by washing down and rubbing and removing all loose layers of old treatment, efflorescence , soot and moss by wire brush and filling all nail holes and patches with cement wall putty and applying one or more coat of oil bound distemper on patches to bring the whole surface at par and applying one coat of oil bound distemper on ceiling complete all as specified and directed.

M&L for preparation of old decorated, wall, chequered floor, roof (corrugal) surface, by brooming and removing all loose layers of old treatment, efflorescence soot and moss by wire brush and filling all nail holes and patches with cement based wall care putty and applying one coat of weather proof Exterior emulsion paint of colour & shade as approved (to match with the Existing surface) complete all as specified and as directed. Make- Asian Apex Ultima or equivalent of make specified in PS. Note: Quoted rates shall deemed to be includs painting at any height including scaffolding work, as required.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials outside MOD land (As approved by local Municipal Authorities) by manual/mechanical means including loading, transporting and unloading the same complete all as specified and as directed.

Comprahensive/patty repair of Surgical Scrub Sink One Bay for different ward/ Dept as No water supply, Hot and Cold mixture Not working, Sensor Not working etc complete all as specified and directed to entire satisfaction of Engr-in-Charge. (Note: Any accessories/ parts required to make sink functional shall be measured and paid separately as supply only here-in-after, however labour element for the same shall be deemed included in unit rate quoted against complaints)

Comprahensive/patty repair for attending complaints of Surgical Scrub Sink Two Bay for different ward/ Dept as No water supply, Hot and Cold mixture Not working, Sensor Not working etc complete all as specified and directed to entire satisfaction of Engr-in-Charge. (Note: Any accessories/ parts required to make sink functional shall be measured and paid separately as supply only here-in-after, however labour element for the same shall be deemed included in unit rate quoted against complaints)

Comprahensive/petty repair for attending complaints of Surgical Scrub Sink Three Bay for different ward/ Dept as No water supply, Hot and Cold mixture Not working, Sensor Not working etc complete all as specified and directed to entire satisfaction of Engr-in-Charge. (Note: Any accessories/ parts required to make sink functional shall be measured and paid separately as supply only here-in-after, however labour element for the same shall be deemed included in unit rate quoted against complaints)

Supply Only in repair Plain Spout for Surgical Scrub Sink. (Make: MHS or equivalent as approved)

Supply Only in repair Thermostatic Mixer Valve for Surgical Scrub Sink (Make: MHS or equivalent as approved)

Supply Only in repair Foot Oprated Control Valve (Make: MHS or equivalent as approved)

Supply Only in repair Scrub Timer Senser PCB (Make: MHS or equivalent as approved)

Supply Only in repair Scrub Solonided Valve (Make: MHS or equivalent as approved)

Supply Only in repair Scrub Door Lock (Make: MHS or equivalent as approved)

Supply Only in repair Brass Elbow Fitting (Make: MHS or equivalent as approved)

Supply Only in repair Brass Socket Fitting (Make: MHS or equivalent as approved)

Supply Only in repair Brass Tee Fitting (Make: MHS or equivalent as approved)

Supply Only in repair Brass Reduser Fitting (Make: MHS or equivalent as approved)

Supply Only in repair Non Corrosive Pipe for Scrub Station (Make: MHS or equivalent as approved)

Supply Only in repair Waste Drain Socket (Make: MHS or equivalent as approved)

Supply Only in repair Waste Drain Pipe (Make: MHS or equivalent as approved)

Supply Only WPC

MAA SANTOSHI ENTERPRISES (BID ID -3114710)

LAXMI GROUP (BID ID -3117011)

M/S Rohit Enterprises (BID ID -3116917)

K S CONSTRUCTIONS (BID ID -3117229)

sony engineering works (BID ID -3117606)

Vishal Traders (BID ID -3116930)

M/S SIMRAN CONSTRUCTION CO (BID ID -3109408)

VIJAY KUMAR GUPTA (BID ID -3117557)

R R Associates (BID ID -3116691)

M/s Pankaj Contractors & Engineers (BID ID -3114093)