Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.1 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹45.0 L+₹70,164.18 (1.58%)Rejected-AOC | L2 | Rejected-AOC Rejected being L2 | |
| 3 | L3₹45.1 L+₹76,859.19 (1.73%)Rejected-AOC | L3 | Rejected-AOC Rejected being L3 | |
| 4 | L4₹45.2 L+₹89,647.91 (2.02%)Rejected-AOC | L4 | Rejected-AOC Rejected being L4 | |
| 5 | L5₹45.4 L+₹1.1 L (2.42%)Rejected-AOC | L5 | Rejected-AOC Rejected being L5 |
Tender Value
₹39.5 L
EMD Value
₹79,000
Closing Date
8 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 867 EWS
GE 867 EWS PIN-913867 C/O 99 APO
ADDN AND ALTN AND SPL REPAIRS TO BLDG NO T-3 AT KALIMPONG UNDER GE 867 EWS
2023_MES_614291_1
GE/867/TOKEN/44 OF 2023-2024
Open Tender
Civil Works
Item Rate
180 days
KALIMPONG
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE 867 EWS
₹79,000
14 Nov 2023
18 Aug 2023
11 Sept 2023
18 Aug 2023
8 Sept 2023
1 Sept 2023
18 Aug 2023 - 28 Aug 2023
Amount
Dismantling of plain or corrugated steel sheeting, any gauge and thickness including Nainital or similar pattern roof coverings complete all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating GI based steel sheet of approved profile of corrugation, 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed by Engr-in-Charge.
S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, eaves board, ridges, hips,valley gutters, drip and straight flashing cladding to wall etc, fixed with self tapping screws all as specified and directed by Engr-in-Charge.
S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed.
S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples;Hooks for facia, chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified.
Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.
Dismantling timber scantlings 40 Sqcm and over in section, in any position (framed work) all as specified and directed.
Dismantling timber fillets, rails, posts rafters purlins etc under 40 Sqcm in section fixed in any position complete all as specified and directed.
S&F GI frame work of size 605 x 605 mm, for seamless celing comprising of GI perimeter chanel 0.55mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.
S&F PVC False ceiling with light weight PVC hollow section pannel made of 1 mm thick and over all thickness of panel 7mm thick and 200 mm wide strips of colour - teak/wood grain/Melamine finish, fixed in new false ceiling grid made of Aluminum/G.I/M.S/wood complete all as specified and as directed.Make- Duraplast,Rajshri plastiwood or equivelant approved by GE Note:- New false ceiling grid of aluminium/GI/MS/wooden if provided shall be measured and paid separately.
M&L for IInd class hard wood plain fillets.area exc.13 and exc.25 Sqcm square, rectangular or triangular in section, clean sawn, secured with nails or bradsbut bullnosed, splayed, chamfered or rounded on one edge or face complete all as specified.
M&L for clean sawn Second class hard-wood in scantlings as in timber frame and fixed.
M&L for 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work complete all as specified.
M&L for second class hard wood Weather boarding, clean sawn, thickness 20mm to 25 mm and rebated on thick edge to give 20mm laps and fixed in repairs to replace old or decayed boarding in patches, including cutting out old, piecing, heading joints etc., and removing dismantled boarding to store complete all as specified.
Preparing surfaces of wood and wood based materials,steel and iron work, new or old,of any description and girth,not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed.
S&F in repairs 25mm thick IInd class hard wood boarding in flooring or skirting Planed one side & edges tongued and grooved or rebated, and fixed with screw complete all as specified and directed.
M&L preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic varnishing over a coat of thin varnish complete all as specified and directed.
M&L preparation of old wooden surfaces of any description over 10 cm width or girth not otherwise described and applying one coats of synthetic varnishing complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing rubbish off the complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick premium quality conforming to relevant IS (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.
M&L 350 X 250 X 7 mm or 450 X 350X 7mm thick coloured glazed ceramic tiles fixed as in vertical surface such as risers of steps, skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15 mm thick rendering in CM (1:4) finished even and rough complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick premium quality conforming to IS-13712, grade B-II(a) (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 20 mm thick screed bed in cement mortar (1:6) complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick premium quality conforming to IS-13712, grade B-II(a) (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm on vertical surfaces such as dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 10 mm thick backing coat in cement mortar (1:4) complete all as specified and directed.
Taking down cement plaster on brick or stone masonry surfaces of walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for 15 mm thick rendering in cement mortar (1:6) on stone masonry surfaces or surfaces other than fair faces of brick work, rendering finished even and fair (without using extra cement) complete complete all as specified and directed.
M&L 20 mm thick rendering (in two layers) on fair faces of brick work or concrete surface in cement mortar (1:4) on external wall finished even and fair mixed with integral water proofing compound @ 3% by weight of cement or in the manner specified by the manufacturer and in the proportions indicated all as specified and as directed. Note:-WPC will be measured and paid separately as supply only.
Supply only integral water proofing compond all as specified and as directed.
M&L for two coats of old bound distemper over a coat of priming coat on newly prepared wall surfaces, including 3 mm thick layer of wall care putty (Birla white or equivalent) all as specified and directed.
M&L for preparation on newly plastered / previously untreated surfaces of wall and applying two coats of cement base paint over a coat of priming on wall surfaces complete all as specified and directed.
M&L preparation of new plastered or unplastered surfaces of walls and applying three coats of white wash on walls complete all as specified and directed.
M&L scrapping of existing treatment and applying two coats of thin layer of wall care putty (Birla white or equivalent) and then applying two coats of oil bound distemper over a coat of priming coat after preparation of wall surfaces complete all as specified and directed.
M&L for preparation of old plastered or unplastered surfaces of wall and applying one coat of white wash as in wall complete all as specified and directed.
M&L scrapping existing treatment on walls & completely removing and applying two coats of cement base paint over a coat of priming on wall surfaces complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
Removing excavated material (soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
M&L 75mm thick PCC (1:3:6) type C-2 (Using 40 mm graded aggreate) as in sub-base.
M&L for coloured & polished Chequered cement concrete tiles 30cm x 30cm x 25mm thick,set, jointed and pointed in neat cement slurry as in floors includig 20mm thick screed bed CM(1:6) all as specified and directed.
M&L for PCC (1:3:6) type C-1 using 20mm graded stone aggregates as in coping complete all as specified and directed.
M&L for 50 mm thick cement concrete (1:3:6) type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection/path laid to slope of 1 in 12 and finishing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering of exposed edges complete all as specified and directed.
M&L for PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work complete all as specified and directed.
M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.
Demolition of brick work or stone/boulder masonary, built in lime mortar including all quions, arches, pillars etc, but excluding ashler facings, dressed stone work and precast concrete articles.
M&L for brick work with sub class 'B' bricks , using old size bricks, straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) complete all as specified and directed.
Taking down chowkhats or frame not exc 1.50 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.
Taking down chowkhats or frame exc 1.50 and not exc 4 sqm each with shutter (without taking off shutters from the frame) complete all as specified and directed.
S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered , put together with glue, pinned at joints complete all as specified and directed.
S&F Anodised aluminium frame for partitions, doors, windows ventilators with one or more rebates, grills including joining cleat for fixing etc., including powder coated complete all as specified and dierected by Engr-in-Charge.
S&F of anodised aluminium window and ventilator glazed shutters sliding type without sash bars, with standard aluminium sections for shutter top & sides , shutter bottom, shutter interlock of sizes 39.4 x 17.7 mm and 1.2 mm thick (min) including necessary jointing cleats, glazing clips, rubber packing, rollers, locking plates, screws, etc. as per manufacturer's instructions complete all as specified and directed.
S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handels 2 Nos in each door, 1 no mortise lock per each door, hinges, anodised alumnium snap beading, screws etc., complete all as specified and directed.
S & F aluminium (Die cast body) door closer hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 800 KG and complete all as directed by Engr-in-charge. Make:- UNIVERSAL/ DYNA/ HARDWIN/ EVERITE
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.
S & F 5.5mm thicks sheet glass panes ordinary quality not exceeding 0.5 sqm each fixed to steel frame,aluminium frame etc complete with necessary clips or oil putty in square including steel pin complete all as specified.
S & F 5.5mm thicks tinted glass panes ordinary quality exceeding 0.5 sqm each fixed to steel frame,aluminium frame etc complete with necessary clips or oil putty in square including steel pin complete all as specified.
S&F 4 mm thick figured glass, pin head type and glazing with beading clips or oil putty in square not exc 0.50 sqm in each pane fixed in aluminium,wooden and steel frame complete all as specified and directed.
S&F mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars,barred iron doors, ladders, framed balusters, walk ways, railings and similar work confirming to Fe-410-0 or Fe 310-0 complete all as specified and directed.
S&F of solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube as per specification and drawing given in clause 8.B.3 of SSR -2010 (Part-II Rates) complete all as specified and directed.
S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing given in clause 8.B.2 of SSR -2010 (Part-II Rates) complete all as specified and directed.
M&L for PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in bed blocks for grouting hold fasts , coping, filling in pressed steel chowkat or similar work including necessary form work as required complete all as specified and directed.
S&F 100 mm size butt hinges, medium weight , stainless steel complete all as specified and directed
S&F of 150 mm long aluminium, anodised, barrel tower bolt, of extruded section and fixed all as specified and directed.
S&F 125 mm size Aluminium handles, cast type, anodised and all as specified and directed.
S&F in repairs harrison rails (curtain rails), mild steel, chromium plated including Knobs and fixing brackets etc complete all as specified and directed.
M&L preparation of new wooden surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L preparation of old wood or wood based surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.
M&L preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.
S&F of PVC low level flushing cistern 10 Ltr capacity, valveless syphonic action type complete with inlet, ball valve, float valve, bends brackets, rawl plug, brass screws handle etc complete having BIS description mark with IS-2731 with and including suitable size of MS brackets, plug, screw all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc, and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with water closet of any type all as specified and directed.
S&F Vitrous china wash down water closet pan pedestal pattern white, exlcuding fixing bolts,flushing cistern & Flush pipe including PVC Seat Cover white recess bottom type mild steel chromium plated or aluminium hanging device complete all as specified and directed including dismantling existing EWC. Make Hindware, Jaquar or equivalent.
S&F in repairs vitreous china wash basin white of any pattern, flat back of size 550mmx400mm (excluding taps), waste, chain and plug including waste pipe ,suitable size of brackets and making good the damaged walls as per existing wall finish complete all as specified and directed.
S & F pillar tap Fancy Type cast copper alloy 15mm bore with capstan head, chromium plated, screwed down high pressure, with or with out lettered "Hot" or "Cold" with long screw shank and fly nuts, screwed for iron pipes.
S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
S&F 40mm waste coupling of CP (half or full threaded) . (Minimum weight 60 gms)
S&F in repair 15 mm bore PVC connection 450 mm long with two brass chromium plated brass nuts and PVC washers complete all as specified and directed.
S&F in repairs angle, stop valve 15 mm bore, chromium plated, fancy type, with wall flange, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repairs angle, stop valve 15 mm bore, chromium plated,but fancy type, chromium plated with long shank and cup (concealed type) , with wall flange, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed.
S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed.
M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on stone walls complete all as specified and directed.
S&F in repair 15 mm bore chromium plated bib tap fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repairs brass chromium plated tubular towel rail of 20mm dia D' type 60cm long between flanges complete all as specified and directed.
S&F in repairs 75 mm size PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed.
S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F in repairs Soap dish, CP, fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F of 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.
Taking down carefully unserviceable copper/aluminium point wiring of any description including all fittings (switch , socket, switch socket combination, lamp holder, ceiling rose, regulator etc.) and making good disturbed surfaces of wall, floor etc. to match with existing finishes complete all as specified and as directed.
Dismantling and taking down unserviceable main switches, DBs including sub main wiring etc. any type / size and making good disturbed surfaces to match with the existing finishes complete all as specified and as directed.
Material and labour for point wiring with two runs of stranded copper conductor PVC insulated unsheathed 1.5 sqmm FRLS cable including PVC casing and capping of suitable size with PVC boards of appropriate sizes and all requisite acessories complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core continuous 1.5sqmm, FRLS copper cable for earth wire for one light point controlled by one switch complete all as specified and as directed.
All as per item No 89 here – in – before but for one fan / exhaust fan point controlled by one switch complete all as specified and directed by Engineer-in-Charge.
All as per item No 89 here – in – before but one 3 pin socket outlet 5 Amps on the same board complete all as specified and directed.
All as per item No 89 here-in-before but one 3 pin, socket outlet 5 Amps on the independent board complete all as specified and directed.
Material and labour for one 15 Amps socket outlet independent with 2.5 Sqmm PVC cable and 1.5 Sqmm cable as earth countinuity wire complete all as specified and directed.
Material and labour for point wiring 2.5 Sqmm PVC cable and 1.5 Sqmm cable as earth continuity wire in and including one single pole and neutral enclosure with two pin and earth plug and socket with one MCB SP 20Amps complete all as specified and directed.
S & F in repairs ceiling rose, 3 terminal, PVC / Polycorbonate insulated body complete all as specified and directed.
Supply and fix switch piano flush button, single pole, 5/6amps, one way all as specified and as directed.
M & L for switch socket combination 3 Pin, 5/6 amps flush type (multi purpose)complete all as specified and as directed.
M & L for switch socket combination 2 in 1, 3 Pin, 15 Amps flush type complete all as specified and as directed.
Supply and fixing in repairs lampangle / batten holder backlite pin/Retrofit type, in and including with 10 Watt LED Lamp (B22) all as specified and as directed.
Supply and Fixing LED tube light fittings, 4 feet long 1 x 18W, 220V, AC decorative box type with holder including removable poly carboanate LED tube light with inbuilt driver connecting up with three core flexible copper conductor cable suitable size complete all as specified and as directed.
S & F TPN DB with suitable for TPN MCB incomer, double door (IP-54), 4 ways, built in 200 Amps busbar for neutral link complete suitable for 415 Volts, AC, 50Hz complete all as specified and as directed.
S & F MCB Tripple polr & Neutral 63 Amps, 415 volts, 50Hz, 15KA complete all as specified and as directed by Engr-in-Charge.
S&F MCBs, SPN 240V, breaking capacity 10KA, rating 40-63Amps complete all as specified and as directed.
S&F MCBs, SP 240V, breaking capacity 10KA, rating 6-32 Amps complete all as specified and as directed.
S&F Exhaust fan made of sturdy engineering plastic complete with louvers shutter voltage 230V, 50Hz, RPM 1200 copper winding of sweep 300mm complete all as specified and as directed.
Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.
SCHEDULE OF CREDIT
HEM RAJ GURUNG
G K SUTHAR
M/S JAYSHREE CONCERN
DEEP CHANDRA JOSHI
PRASAD PRADHAN AND SON
RAMESH GURUNG
RAJU TAMANG
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .