NIT No GE/ND-85/2025-26

Supply, Installation, testing & Commissioning of 1000 mm long rigid architectural RGBW LED Linear light suitable for AC Supply with housing of extruded alminium alloy & Die cast aluminium nd caps. The luminaire shall have applied polyester powder coating finish. The Luminaire's integrated brackets shall be made of extruded aluminium & the same shall be so designed that the luminiare can be tilted +95 degrees. The luminaire shall have silicon glue between optical cover & LED chamber to ensue IP66 Protection. The fixture shall have sutiable beam angle as required & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK07 rated clear tempered glass. The LEDs shall have minimum CRI>80 and shall have SDCM<3. The fixture shall come with power & DMX cable of minimum 100 mm length. The fixture shall be installed with IP67 connectors. THe luminaire shall have system wattage not exceeding 40 W & system lumen Output of at least 1100 lumens. The Fixture should have a life class of 50000 burning hours at L70 @35 Degree Celsius. The luminaire should be compatible with DMX512 Controller. The lumiaire shall automatically addressable using hand held device. The Lumiaire shall be capable of 8 bit control of RED, Green, Blue & White to produce 16.7 million colors complete all as specified and directed. Make : Lustre GLIDE Luminiare Li-92042-36/ Havells Color Line or equivalent in Iguzzini/We-ef/ LED- Linear

Supply, Installation, testing & Commissioning of 1000 mm long rigid architectural RGBW LED Linear light suitable for AC Supply with housing of extruded alminium alloy & Die cast aluminium nd caps. The luminaire shall have applied polyester powder coating finish. The Luminaire's integrated brackets shall be made of extruded aluminium & the same shall be so designed that the luminiare can be tilted +95 degrees. The luminaire shall have silicon glue between optical cover & LED chamber to ensue IP66 Protection. The fixture shall have sutiable beam angle as required & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK07 rated clear tempered glass. The LEDs shall have minimum CRI>80 and shall have SDCM<3. The fixture shall come with power & DMX cable of minimum 100 mm length. The fixture shall be installed with IP67 connectors. THe luminaire shall have system wattage not exceeding 40 W & system lumen Output of at least 1100 lumens. The Fixture should have a life class of 50000 burning hours at L70 @35 Degree Celsius. The luminaire should be compatible with DMX512 Controller. The lumiaire shall automatically addressable using hand held device. The Lumiaire shall be capable of 8 bit control of RED, Green, Blue & White to produce 16.7 million colors complete all as specified and directed. Make : Lustre GLIDE Luminiare Li-92042-36/ Havells Color Line or equivalent in Iguzzini/We-ef/ LED- Linear

Supply, Installation, testing, Commissioning of 5 mtr rolls of high performance flexible linear RGBW Neon Luminaire including dirver made of silicon rubber extrusion with high transparency, tensile strength & UV stability. The lumniare shalle be of horizontal bend type with dimensions not exceeding 16 mm x 1 6 mm suitable for uniform linear facade illumination. The fixture shall operate on 24 V DC constant Voltage supply and should consume not more than 18 W/m. It shall consist of RGBW high brightness LEDs & efficacy at Color level of >15 lm/W. The luminaire shall be individually addressable via DMX512 protocol capable of 10 pixels/m. The lumniare shall be IP67 rates for protection against dust and water & shall be resistant to salt, weak acid/alkali corrosion & UV Radiation. It shall gutable segments at 125 mm intervals and allow DMX512 compatibility. The Neon Flex shall exhibit uniform optical light distribution, with no visible LED dots or shadows maintaining consistent brightness throughout its length. The luminaire shall have a minimum service life class of 50000 hours @ L70 complete all as specified and directed. Make : Havells FLEXEA or equivalent in Iguzzini/ We-ef/ LED Linear/ Lustre.

Supply, installation, testing & Commissioning of RDM-6 Wall DMX Splitter & Booster is a 6-output DMX/RDM splitter with DMX/ RDM pass-through supporting b-directional communications for discovery, addressing & DMX control. This unit takes the incoming DMX/RDM signal & Splits the signal into six seperate output channels, allowing for expanding the number of devices controlled from 32 to 6 x 32. The output terminals are electronically isolated from the input & RDM through port & share a common ground reference. All six outputs have an independent output driver to boost the DMX/RDM signal complete all as specified and directed. Make: Havells DMX Splitter 8 Way or equivalent in Iguzzini/We-ef/ LED-Linear/ Lustre.

Supply, installation, testing & Commissioning of DMX controller with compatibility to control minimum 4 DMX512 universes, playback scenes, and animations stored in its SD Card, and it can be used for offline scenes schedulling, setting brightness, white balance & playback speed adjustments. It should be able to amplify the DMX signal in cascaded connection & support automati playback schedulling. It should support power-on start up and scheduling start along with the capability of unended operation. It should be housed in Aluminium Casing. The Input voltage shall be 12 V DC and shall have 2 RJ45 ports on input side. The IEC Classification shall be class III. It shpould operate on DMX512 protocol. The output shall have 8X 3P lockable terminals. The power consumption shall be 8 W. The Controller should have provision for SD card slot if required. THe controller shall come with 220-240 V to12 V DC power supply. The DMX controller shall be of the same make as that of facade Lighting lumniares. The working temeprature shall be - 30 to 50 Degree Celsius complete all as specified and directed. Make: Havells DMX Controller or equivalent in Iguzzini/We-ef/ LED Linear/ Lustre.

Programming for lighting management system includes addressing for all smart lighting fixture along with mapping on connected system. All fixture to be programmed as per the site requirement. Min 5 Scenes to be created & configure on smart keypad for ease of operation of smart light system complete all as specified and directed. Make : Iguzzini/We-ef/Led-Linear/Lustre/Havells Note: (a) The work has to be executed through OEM/OEM authorised agency only. (b) The contractor must sign bid specific MoU with the OEM for execution of work through OEM/OEM authorised agency. (c) The contractor must submit the copy of the MoU signed with OEM at the time of submission of Technical bid, failing which his technical bid shall be summarily rejected.

Supplying,fabrication, installation, testing and commissioning of LT panel not less than 3mm thick made out of modular polycarbonate thermoplastic enclosures outdoor type, factory made CPRI approved, floor mounting type, environment friendly, recyclable, UV resistant, halogen and silicon free, anti-acid and anti corrosive, IP-65 Protection in accordance with IEC 60529, 24 hrs astronomical time switch, auto/ manual selector switch, ON/OFF push buttons. The gasket material shall be plyurethane while the gas/ket shall be internally embedded including suitable working space suitable for 3 phase 4 wire system 415V, 50HZ, AC supply and fixed on raised PCC base 1:2:4, type B1 (20mm graded aggregate) raised base with cable glands, phase indicators, internal wiring, CT of suitable Ratio, digital voltmeter and ammeter, air passing holes with proper spacing to accommodate to all control switches and other accessories, cable connections with suitable size of lugs/thimble etc including suitable size canopy to cover the panel with proper fixing arrangement including excavation and earth work complete all as specified and directed and comprising the followings. Incoming : (a) MCB 32 Amps, 4 Pole - 01 No (b) Power contactor - 32 Amps (c) Surge protection device - 01 No (d) RYB Indicating lamp (e) Digital Voltmeter and ammeter of suitable rating (f) Start/stop Push Button -1 No (g) Over voltage/under voltage relay - 01 No Outgoing: (a) MCB DP, 32 Amps, 2 pole - 02 Nos

Supply, laying, testing and commissioning of 2 runs x 4 sqmm copper flexible cable for power supply to the fixure complete all as specified and directed by Engineeer-in-Charge. Make : Havells/Polycab/RR Kabel

Supply, laying, testing and commissioning of 2 runs x 2.5 sqmm copper flexible cable for power supply to the fixure complete all as specified and directed by Engineeer-in-Charge. Make : Havells/Polycab/RR Kabel

S&F PVC conduit pipe of size 25mm suitable for passing cable complete all as specified and directed by Engineer-in-Charge.