SPL REPAIR TO TOILET BLOCKS AT MH MEERUT AND CERTAIN REVENUE AND MINOR WORKS AT DCN SUB GP DABATHWA, MH MEERUT, SOLAR PLANT AND GE OFFICE UNDER GE (U) MEERUT CANTT

Amount

Dismantling plain or corrugated asbestos cement ( corrugated/semi-corrugated etc) sheets in roof covering, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided, complete all as specified and directed.

S&F and Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to FE - 410 ( GDE-250), complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed self tapping screwes/ J or L type cranked hook bolts, complete all as specified and directed.

Ditto as per above item but plain sheet as in ridge, complete all as specified and directed.

M&L providing cement concrete type B1 1:2:4( 20 mm graded aggregate ) in coping roof kerbs or mud stops rounded or chamfered on edge, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) and removing rubbish off the MD land, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed.

M&L for 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded aggregate in sub base of floors, complete all as specified and directed.

M&L desinger digital glazed ceramic coloured tiles of size excd 0.11 sqm and not excd 0.18 sqm , 7-8mm thick , on vertical surfaces such as dados skirting and risers to step etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and incuding 10mm thick renderingin CM 1:4 complete all as specified. ( the quoted rate shall deem to be included for screed beading and shall not be measured and paid separately ).

M&L non skid edge cut coloured ceramic tiles 7mm to 8 m ( square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:6, complete all as specified and directed.

Demolition brickwork or stone work built in cement mortar including all quoins arches , pillers etc , complete all as specified and directed.

M&L for brick work with fly ash bricks ( old size) straight or curved in plan exc 6 m mean radius , built in CM 1:6 Complete all as specified and directed

Taking down cement plaster including raking out joint hacking for key scribbing down with water, complete all as specified and directed.

M&L for 15 mm thick rendering on brick/ concrete surfaces of external walls in CM 1:4 finshed even and fair etc complete all as specified

M&L 10 mm thick rendering on fair faces of brick work or concrete surfaces in cm 1:4 finish even and smooth (with out using extra cement )

M&L preparing the surfaces on new plaster surfaces of walls by brooming down or steel wire brushing walls and applying three coat of white wash complete all as specified.

M&L preparaing the surfaces on old plaster surfaces of walls by brooming down or steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots, washing, rubbing down and stopping of distempered and painted surfaces and applying two coat of white wash complete all as specified.

Taking down Chowkats or frames not exc. 1.5 Sqm each, with shutters (without taking off shutters from the frame).

S&FSolid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing, complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S&F for 150mm size extruded aluminium alloy handles, fabricated type, anodised all as specified and directed.

S&F for aluminium, anodised barrel tower bolt of extruded section and fixed 150mm of size all as specified and directed.

Supply & fix 15 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including Taking up or down GI steel tubing, etc complete all as specified & directed.

Supply&fix 20mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including taking up or down GI steel tubing,etc complete all as specified & directed.

S&F as in repair 15mm bore pillar tap, long shank, swan neck, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts complete all as specified & directed.

S&F as in repair 15 mm bore bib tap chromium plated, cast copper alloy, with crutch or butterfly handle, flange, screwed down for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic seat cover black closed pattern with flat bottom and cover mild steel chromium hinhes device and zet sprey complete

Supply and fixing as in repair PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor. complete all as specified.

S&F as in repair Vitreous China wash basin, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & plag bolts,32 mm CP waste coupling complete all as specified.

Supply & fix in repairs PVC connections of 600mm long Make suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply and fix in repairs PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

S&F in reipair CP towel rail brass 20mm dia 600mm long with bracket CP finish

Supply & fix in repairs steel C.P. grating 100 mm dia waste pipe hole fitted as required at site complete all as directed by Engineer-in-Charge.

S&F in repair 15 mm bore stop cock, chromium plated, cast copper alloy, screwed down with crutch or butterfly handle screwed both ends, as in repair including flench complete all as specified & directed.

Ditto but concealed type

S&F Swivel CP shower rose including arm 195 mm long with bend of 45 digree with flange

S&F 600X450 mm looking mirror edge of slected quality glass mounted om 6 mm thick AC building board or commercial ply wood and fixed to wooden pluge with chromium brass screwes and put up washers etc

Dismantling of 100/110 cast iron, PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches, if required all as directed

S&F of 110mm dia UPVC ultra drain,SelFit pipes, single socketed, ISI marked, IS-13592 type 'B' in any length, jointed with solvent cement fixed in walls and floors , complete all as specified and directed.

S&F of UPVC bend equal of any radius without door, ISI marked, IS-14735, jointed with solvent cement for 110mm size pipes, complete all as specified and directed.

Dismantling of 75 cast iron, PVC or reinforced concrete pipes jointed in cement mortar and taking out of trenches, if required all as directed

S&F of 75 mm dia UPVC ultra drain,SelFit pipes, single socketed, ISI marked, IS-13592 type 'B' in any length, jointed with solvent cement fixed in walls and floors , complete all as specified and directed.

S&F of UPVC bend equal of any radius without door, ISI marked, IS-14735, jointed with solvent cement for 75 mm size pipes, complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including connections and fixed in position complete all as specified and directed

S&F 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed , complete all as specified and directed.

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass 12 cm wide with chromium plated bracket guard and railing 60 cm long , complete all as specified and directed.

S&F 110 mm dia PVC (SWR) floor trap with grating including jointing with cement solvent , complete all as specified and directed.

S&F stainless steel handle 40 mm dia grade 304 D type cast 300 not less than m length fixed with screw on walls in toilets complete all as specified and directed

M&L cement concrete 75 mm thick type C1 1:3:6 ( 40 mm graded aggregate as in plinth protection )

M&L for surface dressing n exc 30cm deep in soft/loose soil complete all as specified and directed

M&L for hardcore of broken stone or boulders of gauge not exceeding 63mm of deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L cement concrete type D-2 1:4:8 (40mm graded aggregate) as in foundation filling and mass concrete complete all as specified.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded aggragate as in foundation, filling & mass concrete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:6 finished even & smooth without using extra cement complete all as specified & directed by Engineer-in-Charge.

M&L preparaing the surfaces on new surfaces applying two coat of distemper oil emulsion over a coat of 2 mm thick putty complete all as specified.

M&L for applying Two or more coats of 100% Premium external weatherproof paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and directed.Make:-Apex Ultima protect/Berger paints(weather coat smooth)).

S&F aluminium glazed window shutters, Three track (each shutter approx. half the size of opening with two Nos. glazed shutter and 1 No. wire gauged shutter including necessary jointing cleats for fixing etc, glazing clips, rubber packing, aluminium anodised snap beading, screws, aluminium (anodised) fittings such as handle clips (suitable size), locking device, and glazing in panels with 5.0mm thick coloured/tinted glass and gauged with 0.36mm dia, 1.40mm aperture SS wire meshu sing Jindal Aluminium Section Id 491, 4309, 4310, 8853, 8851, 9205 complete all as specified and shown in drg and as directed by Engineer-in-Charge. (In case of non-availability of any particular section, the highter section in terms of Kg/rm shall be provided without any extra cost to govt.

Supply and fixing aluminium anodised grill of approved shape with opening in grill 66mm x 80mm (diagonally) or nearest to + 5mm made out of standard aluminium moulded section of size 6mm x 7mm

S & F Anodised Alu. Snap grid 605x605 mm frame wk for false ceiling and providing 4mm th cemented fibre board for insula-tion and accoustic purposes, 60x60 cm in size, fixed in celing with screws to frame work or with staples on snap grid including hangers 6 mm dia G.I. ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long all as specified

S& F pressed steel frames size 125X60mm for doors with one or more rebates including necessary fixinjg lugs hings lock strike plats complete as specified

S & F 30mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified

S&F for 300mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cost aluminium alloy all as specified and directed.

S&F 100 butt hings heavy weight cold rolled mild steel all as specified and directed.

S&F 150 mm overall length of cover plate floor dooe stopper of aluminium alloy body and tougue with hard drawn steel spring all as specified and directed.

S&F MS wind tie for roof including securing bolte etc ompleteall as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded aggragate as in sub base of floor all as specified and directed.

M&L vitrified ceramic dark shade 10 mm thick (sqaure/rectangular) area of each tiles n.exc. 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match existing tiles and including 15 mm thick screed bed or bedding layer of mortar 1:6 for laying floor finishes , complete all as specified and directed.

Ditto as per above item but on vertical surfaces over and including 10 mm thick backing coat in cm 1 : 4, complete all as specified and directed.

Excavation in post holes ( for similar holes) each n,exc 0.5 cum getting out , in soft/ lose soil, complete all as specified and directed.

S&F MS Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming , complete all as specified and directed.

M&L hardcore of guage exc. 63 mm but n,exc 150 mm thick deposited spread and levelled in layers n exc 15 mm thick watered and rolled /rammed to a true surfaces, complete all as specified and directed.

M&L for sand filling under floors including watering & consolidation concrete all as specified and directed.

M&L for coloured Machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 grade concrete all as specified and directed

M&L 100 mm thick cement concrete type B-2 1:2:4 (40mm graded aggregate) as in flooring concrete complete all as specified and directed

Surfaces excavation n,exc 30 cm deep and avergaing 15 cm deep and getting out in soft/loose soil, complete all as specified and directed.

Excavation in trenches n,exc 1.5m wide and n,exc 1.5m in depth for foundation etc or for shafts wells cesspits manhole etc n,exc 10sqm on plan and n,exc m in depth and getting out in soft/loose soil, complete all as specified and directed.

Returning filling in, including spreading, levellin, watering and well ramming in layers n;exc 25 cm , complete all as specified and directed.

Removing excavated material n ;exc 50 m and depositing where directed at a level n;exc 1.5 m above the starting point, complete all as specified and directed.

S&F rolled sections as in main and cross beams , hip and jack rafters , purline where connected to common rafters and running rails and guides for sliding doors , fixed with angle cleats or other connecting plates conferming to Fe-410 Gde E-250 quality

M&L Machine cut kota stone slab flooring 20-25mm thick over and including 15 mm thck cement screed base in cm 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirrior polishing complete

M&L for 100mm thick PCC 1:4:8 type D-2 using 40mm graded aggragate as path/hard standing all as specified and directed.

M&L preparation of new wall surfaces and applying two coat of cement base paint over a coat of primer acomplete all as specified and directed.

M&L for Glazed ceramic tiles 450mmX350mmX7mm thick (square/rectangular and Glossy finish) of approved colour on vertical surface, set and jointed in neat cement slurry and pointed with coloured cement to match the tile colour over and including 10mm thick backing coat in CM (1:4), complete all as specified and directed.

M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms a including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade, over and including 15 mm thick cement screed base in CM 1:6 , complete all as specified and directed.

S and F stainless steel sink 1 mm thick for kitchen, with plug waste pipe washers incl cantilever cast iron brackets, connecting union to waste pipe etc including bedding in cement mortor on to dwarf wall overall size 495x420mm with bowl size 410mm x 330mm x160mm with 40 dia mm CP waste coupling complete all as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items will be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. to match with the adjoining surafces complete all as specified .

Material & labour point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed (FRLS) copper conductor cable in and including PVC concealed conduit of 25 mm dia or higher, medium grade complete with and including all PVC conduit accessories/fittings, brass screws, washers etc, Sunk Zinc coated pressed steel terminal boxes including all cutting/chases etc in walls, making good to walls, ceiling etc including two coats of white/colour washing/ distempering etc to the disturbed surfaces to match the existing with 3 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper stranded conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings.

One light /Tube/fan point controlled by one, one way switch 05/06 Amps

One 3 Pin, 05 /06 Amps socket outlet point on independent board controlled by one, one way 5/06 Amps switch

One 3 Pin, 05 /06 Amps socket outlet point on same board controlled by one, one way 5/06 Amps switch

All as per serial item No 2 (d) here in before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 /16 Amps socket outlet point on independent board with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed

Supply & fixing switch piano flush type, 05/06 Amps single pole , one way 240 volts complete all as specified & directed .

Supply & fixing socket outlet 3 pin, 05/06 Amps (2 -in-1 Multipurpose) flush type 240 volts complete all as specified & directed.

Supply & fixing switch piano flush type, 15 /16 Amps single ploe, one way 240 volts complete all as specified & directed .

Supply & fixing of socket outlet 3 pin, 15/16 Amps (2 -in-1 Multipurpose) flush type 240 volts complete all as specified & directed.

Supply & fixing of ceiling rose surface bakelite 65x 50mm three terminals complete all as specified & directed.

Taking down and supply and fixing 20 watts Light emitting Diode (LED) smart tube light fitting wall mounting, indoor decorative aluminium extruded T5 LED battens, Inbuilt occupancy sensor with minimum 6mtr dia sensor coverage area, 30% light output in case of non-occupancy, constant current output driver, AC 230-240V, 50 hz, with Opal diffuser, 4' long, easy to install, Efficiency:100 lumen/watt, Minimum built in 2.5 KV Voltage Serge Protection, Power factor > 0.9, making connections with and including 23/.0076 flexible cord of required length from ceiling rose to connector complete all as specified and directed.

Taking down and supply and fixing10 watts Light emitting Diode (LED) tube light fitting wall mounting , indoor Engineering plastic batten with white cover sleek design & high efficiency 2' long, easy to install, Efficiency:100 lumen/watt, with and including 23/.0076 flexible cord of required length from ceiling rose to connector complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm including cutting of hole in wall grouting, fixing complete all as specified and directed.

Taking down and supply and fixing MCB , SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed

Taking down and supply and fixing MCB SPN, AC, 240 volts of 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

Taking down and supply and fixing epoxy powder coated distribution box, SPN, 4 ways, 240 volts, IP-43 ,metal double door for MCB , grouted flush to walls including making good disturbed surafces of wall to match the adjoining surfaces complete all as specified and directed.

Taking down and supply and fixing for Submain wiring with nominal cross sectional area of 4 Sqmm 2 run (FRLS) PVC insulated and unsheathed multistranded copper conductor alongwith one run of 4 sqmm earth continuity conductor drawn through and including 25 MM dia,PVC concealed conduit medium grade with all accessories all as directed.(Note: The rate of cutting chasis and making good of disturbed surfases shall be include in the quated rate)

Taking down and supply and fixing including connecting and testing of energy saving & environment friendly LED Bldg security light made out of pressure die cast anodised aluminium with toughened glass cover housing, 30 watts LED to achieve electrical safety class 1, CRI>70 colour temperature 5000k to 6000k with LED working life time >50000 burning hours with integrated constant current electronic driver, nominal volatge 240V, AC,50 Hz, operating voltage range 120-280V, suitable for ambient environmental condition of station, TDH<10%,, Pf >0.95, lumens >80 lm/W, Ingress protection not less than IP65, driver and luminaire shall comply not less than LM-79 or IS 16106 of 2012 including 32mm nominal bore light grade GI pipe brackets made out of 1.50M long GI pipe ,bent to shape and fixed to poles/ walls with Two Nos mild steel flat iron brackets of 40mmx6mm, comprisng 4 Nos mild steel hexogonal head bolts of 12 mm dia, 75 mm long with washers duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, and making connections with cable complete all as specified and directed.

Supply and fix fan step regulator, 120 W 2 module complete all as specified and directed.

S&F light emitting diode (LED) tube light fitting surface/pendent mounting decorative box type AC 220-240V, 50 Hz, designed with high quality alu;minium extrusion with high quality diffuser 20 watt, 4' long and making connections with and including 23/.0076 flexible cord of reqiured length from ceiling rose tod connector complete all as specified and directed.

Supply and fixing ceiling fnas complete with blades, down rods, electronic regulator and accessories, 230V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE five star rated with brusheless directe corrent motor (BLDC) complete all as specified and directed.

Supply & fixing MCB DB Box 8 way 200 Amps capacity, 240 volts, Double door, SPN and flush to wall including all cutting etc on wall and making good the disturbed surfaces with painting the wall to match the existing all as specified & directed including taking out old u/s DBs any capacity complete all as specified & directed.

Supplying, fixing including connecting and testing of energy saving & environment friendly LED street light made out of pressure die cast anodised aluminium with toughened glass cover housing, 30 watts LED to achieve electrical safety class 1, CRI>70 colour temperature 5000k to 6000k with LED working life time >50000 burning hours with integrated constant current electronic driver, nominal volatge 240V, AC,50 Hz, operating voltage range 120-280V, suitable for ambient environmental condition of station, TDH<10%,, Pf >0.95, lumens >80 lm/W, Ingress protection not less than IP65, driver and luminaire shall comply not less than LM-79 or IS 16106 of 2012 including 32mm nominal bore light grade GI pipe brackets made out of 1.50M long GI pipe ,bent to shape and fixed to poles/ walls with Two Nos mild steel flat iron brackets of 40mmx6mm, comprisng 4 Nos mild steel hexogonal head bolts of 12 mm dia, 75 mm long with washers duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, and making connections with cable complete all as specified and directed

mohanlal gupta

SA construction co.

BHAGWAN DAS & Co

M/S AGARWAL CONSTRUCTION CO.

Rajneesh Jain