SPL REPAIR OF 07 TOILET OF ADM BLOCK BLDG NO P-360 AND 03 TOILET BLOCK OF OTM ACCN OF INF BGD AND BLDG NO P-246/05, 246/06 AND 246/08 IN JAIPUR MIL STN UNDER GE (S) JAIPUR

Amount

Taking down cement plaster including raking out joints, hacking for key scrubbing down with water etc built in CM 16/SR/61SA/BLDG/2021-22/Q3W: 400 15/SR/61SA/BLDG/2021-22/Q3W: 345 09/SR/61SA/BLDG/2021-22/Q3W: 595

M&L rendering 15 mm thick in CM(1:6) on brick walls or concrete surface, surface finished even and smooth without using extra cement complete all as specified. 16/SR/61SA/BLDG/2021-22/Q3W: 150 15/SR/61SA/BLDG/2021-22/Q3W: 175 09/SR/61SA/BLDG/2021-22/Q3W: 230

M&L for rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick work of walls, finished fair & even. 16/SR/61SA/BLDG/2021-22/Q3W: 200 15/SR/61SA/BLDG/2021-22/Q3W: 100 09/SR/61SA/BLDG/2021-22/Q3W: 270

M&L for rendering 10mm thick in cement mortar 1:4 on concrete surfaces including finished even & smooth without using extra cement on ceiling. 16/SR/61SA/BLDG/2021-22/Q3W: 50 15/SR/61SA/BLDG/2021-22/Q3W: 70 09/SR/61SA/BLDG/2021-22/Q3W: 95

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper of approved shade/tint over a coat of Birla wall care putty on walls all as specified & directed by Engineer-in-Charge 16/SR/61SA/BLDG/2021-22/Q3W: 150 15/SR/61SA/BLDG/2021-22/Q3W: 175 09/SR/61SA/BLDG/2021-22/Q3W: 230

M&L for Two coats of Oil Bound Distemper on newly plastered surfaces of Ceiling over a coat of Birla wall care putty including preparation of surfaces. 16/SR/61SA/BLDG/2021-22/Q3W: 50

M&L for preparation of new plastered surfaces and applying two coats of weather base paint over a coat of 1mm thick birla wall care putty of approved shade on walls all as specified & directed by Engineer-in-Charge 16/SR/61SA/BLDG/2021-22/Q3W: 200

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for. 16/SR/61SA/BLDG/2021-22/Q3W: 5 09/SR/61SA/BLDG/2021-22/Q3W: 3.25

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), 16/SR/61SA/BLDG/2021-22/Q3W: 300 15/SR/61SA/BLDG/2021-22/Q3W: 350 09/SR/61SA/BLDG/2021-22/Q3W: 102

S&F Coloured Glazed ceramic tiles size 300x450mm x 7mm thick edge cut/ joint free , on walls etc in the combination of light and dark shed concept . set & jointed in neat cement slurry & pointed in white/coloured cement to match over 10mm thick plaster in cement mortar (1:4) 16/SR/61SA/BLDG/2021-22/Q3W: 215 15/SR/61SA/BLDG/2021-22/Q3W: 250 09/SR/61SA/BLDG/2021-22/Q3W: 90

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick edge cut/ joint free (squares/ rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15 mm thick cement rendering in CM ( 1:6) finished fair and even . 16/SR/61SA/BLDG/2021-22/Q3W: 85 15/SR/61SA/BLDG/2021-22/Q3W: 100 09/SR/61SA/BLDG/2021-22/Q3W: 12

M&L CP cast copper alloy bib taps two way with wall flange and aerator fancy type of 15 mm bore quarter turn (Make-CERA CAT PART NO CQ 606or equivalent of MARC, JAQUAR) fixed in repair. 16/SR/61SA/BLDG/2021-22/Q3W: 10

S&F PVC connection 15mm bore with 2 Nos PTMT nuts, 45cm long fixed with one end to pillar tap & the other end to stop cock or iron pipe all as directed by Engineer-in-charge, fixed in repair 16/SR/61SA/BLDG/2021-22/Q3W: 40 15/SR/61SA/BLDG/2021-22/Q3W: 25

M&L CP fancy Type center hole basin mixer 15mm bore cast copper alloy with 450 mm copper hose /braided hose without Popup waste system quarter turn fixed in repair (Make-CERA CAT PART NO CQ 615 or equivalent of MARC, JAQUAR) 16/SR/61SA/BLDG/2021-22/Q3W: 10 15/SR/61SA/BLDG/2021-22/Q3W: 9

M&L CP wall Mixer with flange & 115 mm long bend pipe for over head shower non Telephonic type with connecting legs wall flanges and crutch etc quarter turn ( Make-CERA CAT PART NO CQ 612 or equivalent of MARC, JAQUAR) 15mm bore for mixing hot & cold water fixed in repair 16/SR/61SA/BLDG/2021-22/Q3W: 4 15/SR/61SA/BLDG/2021-22/Q3W: 6

M&L Towel ring of brass CP Square flange (Make-CERA CAT PART NO CQ 102 or equivalent of MARC, JAQUAR), fixed in repairs 16/SR/61SA/BLDG/2021-22/Q3W: 10 15/SR/61SA/BLDG/2021-22/Q3W: 6

M&L Chromium plated Overhead Rain shower with revolving joint and 115mmlong shower arm with wall flange 15 mm bore fancy type any colour (Make-CERA CAT PART NO CP 140 or equivalent of MARC, JAQUAR) and fixed in repair 16/SR/61SA/BLDG/2021-22/Q3W: 2 15/SR/61SA/BLDG/2021-22/Q3W: 6

M&L Chromium plated angle stop cock with wall flange fancy type cast copper alloy 15 mm bore any colour (Make-CERA CAT PART NO CQ 608 or equivalent of MARC, JAQUAR) fixed in repair 16/SR/61SA/BLDG/2021-22/Q3W: 8 15/SR/61SA/BLDG/2021-22/Q3W: 12 09/SR/61SA/BLDG/2021-22/Q3W: 6

M&L CP cast copper alloy bib taps Long body with wall flange fancy type of 15 mm bore quarter turn (Make-CERA CAT PART NO CQ 604 or equivalent of MARC, JAQUAR) fixed in repair. 16/SR/61SA/BLDG/2021-22/Q3W: 10 15/SR/61SA/BLDG/2021-22/Q3W: 9

S&F in repairs Vitreous China wash basin, coloured oval shape , size 550x400mm but including brackets, coupling and waste pipe fitted in granite counter slab of size 600mmx900mm, with MDF cabinet compete all specified and directed by Engr-in-Charge fixed in repair 16/SR/61SA/BLDG/2021-22/Q3W: 12 15/SR/61SA/BLDG/2021-22/Q3W: 9

Demolition of old existing unserviceable EWC seat and S & F Vitreous China coloured EWC wall mounted with flushing cistern incl PVC coloured sheet cover complete all specified by Engr-in-Charge (Make-MARC CAT PART NO MAC 3020 or equivalent in CERA, JAQUAR) 16/SR/61SA/BLDG/2021-22/Q3W: 12

S&F Waste fittings 32mm bore, brass, CP for glazed ware sinks, basins, etc. with long screwed shanks & fly-nuts, flange end bedded in red lead cement & other end fixed(Make-MARC CAT PART NO MAC 3038 or equivalentof CERA JAQUAR) fixed in repair 16/SR/61SA/BLDG/2021-22/Q3W: 12

S&F CP bottle trap with internal partition 32 mm size with 300 mm X 190 mm long wall connection pipe and wall flange for WHB (Make-Make-CERA CAT PART NO CM 104 B or equivalent of MARC, JAQUAR) fixed in repair 16/SR/61SA/BLDG/2021-22/Q3W: 12

Taking down the existing unserviceable stop valve and S&F stop valve 15mm, . copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. 16/SR/61SA/BLDG/2021-22/Q3W: 6 15/SR/61SA/BLDG/2021-22/Q3W: 9

S&F in repair Stop valves 20 mm bore, . copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions 16/SR/61SA/BLDG/2021-22/Q3W: 4 15/SR/61SA/BLDG/2021-22/Q3W: 3 09/SR/61SA/BLDG/2021-22/Q3W: 3

All as per item No 25 above but of 25mm bore 15/SR/61SA/BLDG/2021-22/Q3W: 3

S&F of CP pressure JET for EWC including flexible pipe for 15 mmdia bore 16/SR/61SA/BLDG/2021-22/Q3W: 12 15/SR/61SA/BLDG/2021-22/Q3W: 3

S&F of CP Health faucet for EWC including flexible pipe for 15 mmdia bore 16/SR/61SA/BLDG/2021-22/Q3W: 13

Dismantling of old U/S grating and M&L of PVC Nahani / floor trap and square in size of 100X100 mm including MS chromium plated grating 125mm dia of weight not less than 50gm for floor trap / Nahani trap. 16/SR/61SA/BLDG/2021-22/Q3W: 20 15/SR/61SA/BLDG/2021-22/Q3W: 21

Dismantling and taking up or down the existing unserviceable GI pipe and M&L for new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of following sizes :-

15 mm bore 16/SR/61SA/BLDG/2021-22/Q3W: 200 15/SR/61SA/BLDG/2021-22/Q3W: 150 09/SR/61SA/BLDG/2021-22/Q3W: 35

20 mm bore 16/SR/61SA/BLDG/2021-22/Q3W: 50 15/SR/61SA/BLDG/2021-22/Q3W: 50 09/SR/61SA/BLDG/2021-22/Q3W: 20

25 mm bore 15/SR/61SA/BLDG/2021-22/Q3W: 50

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 500 Ltrs Capacity including Dismantling water tanks 16/SR/61SA/BLDG/2021-22/Q3W: 3 09/SR/61SA/BLDG/2021-22/Q3W: 3

All as per Ser Item No 31 above but 1000 ltrs capacity 16/SR/61SA/BLDG/2021-22/Q3W: 4 15/SR/61SA/BLDG/2021-22/Q3W: 3

S&F Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule and fixed in repair 16/SR/61SA/BLDG/2021-22/Q3W: 7 15/SR/61SA/BLDG/2021-22/Q3W: 3 09/SR/61SA/BLDG/2021-22/Q3W: 3

M&L for providing circular, raised platform of height 20 cm below the tank and base 15cm more than the external dia of thank of PVC cylindrical water tank of capacity 500/100 liters using PCC 1:3:6 type c1 using 20mm graded stone aggregate with smooth finish 16/SR/61SA/BLDG/2021-22/Q3W: 7 15/SR/61SA/BLDG/2021-22/Q3W: 3 09/SR/61SA/BLDG/2021-22/Q3W: 3

Hacking out old broken glass any thickness size, quality or description from wooden/steel frames fixed with wooden beads/metal pinning and S&F 3 mm thick sheet glass in squares not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal frame 16/SR/61SA/BLDG/2021-22/Q3W: 6

S&F vitreous china bowl urinal flat back,large size of 590 x 390 x 375 mm (minimum) white, with grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia in repair.Make HINDWARE/Jaquar/Parryware or equivalent 16/SR/61SA/BLDG/2021-22/Q3W: 7 15/SR/61SA/BLDG/2021-22/Q3W: 3

S&F in repairs elegant mirror PVC cabinet with towel rail of size 475 x 600 x 150 mm all as specified (Make : Prayag/ Commander) 16/SR/61SA/BLDG/2021-22/Q3W: 2

S & F Soap dish brass CP ((Make-CERA CAT PART NO CA 103 or equivalent of MARC, JAQUAR) fixed in repair 16/SR/61SA/BLDG/2021-22/Q3W: 12 15/SR/61SA/BLDG/2021-22/Q3W: 15

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors 16/SR/61SA/BLDG/2021-22/Q3W: 30 09/SR/61SA/BLDG/2021-22/Q3W: 8

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints fixed to walls 16/SR/61SA/BLDG/2021-22/Q3W: 10 09/SR/61SA/BLDG/2021-22/Q3W: 10

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors 16/SR/61SA/BLDG/2021-22/Q3W: 30 09/SR/61SA/BLDG/2021-22/Q3W: 8

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints fixed to walls 16/SR/61SA/BLDG/2021-22/Q3W: 10 09/SR/61SA/BLDG/2021-22/Q3W: 10

S&F PVC (SWR) bends any radius 75mm dia 16/SR/61SA/BLDG/2021-22/Q3W: 7 09/SR/61SA/BLDG/2021-22/Q3W: 6

S&F PVC (SWR) bends any radius 110mm dia 16/SR/61SA/BLDG/2021-22/Q3W: 7 09/SR/61SA/BLDG/2021-22/Q3W: 6

S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm dia 16/SR/61SA/BLDG/2021-22/Q3W: 7 09/SR/61SA/BLDG/2021-22/Q3W: 6

S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia 16/SR/61SA/BLDG/2021-22/Q3W: 7 09/SR/61SA/BLDG/2021-22/Q3W: 6

S&F PVC (SWR) vent cowl 110mm dia 16/SR/61SA/BLDG/2021-22/Q3W: 7 09/SR/61SA/BLDG/2021-22/Q3W: 6

M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement 16/SR/61SA/BLDG/2021-22/Q3W: 7 15/SR/61SA/BLDG/2021-22/Q3W: 15 09/SR/61SA/BLDG/2021-22/Q3W: 6

M&L PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement 16/SR/61SA/BLDG/2021-22/Q3W: 7

M&L Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws in repair (Make-CERA CAT PART NO CA 106 or equivalent of MARC, JAQUAR) fixed in repair 16/SR/61SA/BLDG/2021-22/Q3W: 12 15/SR/61SA/BLDG/2021-22/Q3W: 3

S&F bathroom Glass corner of best quality (as per sample) Fixed in repair 16/SR/61SA/BLDG/2021-22/Q3W: 21 15/SR/61SA/BLDG/2021-22/Q3W: 9

M/L for Fancy type MS bracket suitable for curtain rod fixed in repair 16/SR/61SA/BLDG/2021-22/Q3W: 3 09/SR/61SA/BLDG/2021-22/Q3W: 10

M&l of 20 mm dia Drapery Fancy type curtain rod fixed in repair 16/SR/61SA/BLDG/2021-22/Q3W: 4 09/SR/61SA/BLDG/2021-22/Q3W: 30

M/L for Fancy type caps/ side Bulbs PVC powder coated suitable for curtain rod fixed in repair 16/SR/61SA/BLDG/2021-22/Q3W: 3 09/SR/61SA/BLDG/2021-22/Q3W: 10

Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) 16/SR/61SA/BLDG/2021-22/Q3W: 7 15/SR/61SA/BLDG/2021-22/Q3W: 18 09/SR/61SA/BLDG/2021-22/Q3W: 10

Taking down Chowkats or frames n exc 1.5 sq. m each with shutters (without taking off shutters from the frames) 16/SR/61SA/BLDG/2021-22/Q3W: 10 15/SR/61SA/BLDG/2021-22/Q3W: 15 09/SR/61SA/BLDG/2021-22/Q3W: 10

Taking down shutters of any description exc 1.00 sqm but n exc 2.50 sqm each 16/SR/61SA/BLDG/2021-22/Q3W: 5 09/SR/61SA/BLDG/2021-22/Q3W: 4

Providing and fixing 28mm thick factory made PVC Supreme Door Shutter consisting of frame made out of m.S. tubes of 19 gauge thickness nd size of 40mmx20mm for stiles, top and bottom rails having a coat of steel primers of approved make and manufacture. M.S. Frame covered with 4mm thick heat moulded "Rajshri" Prelam PVC 'C' Channel of size 28mm thickness,75mm width out of which 60mm shall be flat and 15mm shall be tapered in 45dgree angle on either sides forming stiles, top and bottom rail and 100mm wide Rajshri Prelam PVC sheet out of which 100mm shall be be flat and 15mm shall be tapered An additional of 5mm thick PVC sheet of 20mm width is to be stuck on the interior side of 'C' Channel using PVC solvent adhesive etc. complete on both sides to form lock rail.Lock rail shall be provided on either side of panel. Panelling of 4mm thick PVC sheet to be fitted in the MS Frame welded/sealed to the stiles with 8mm (4mm + 4mm) x 12mm wide PVC sheet as beading on inner side and 8mm (4mm + 4mm) x 20mm wide PVC sheet as beading on the inner tapered side of lock rails joined together with solvent cement adhesive. An additional of 4mm thick PVC sheet of 20mm width is to be stuck on the interior side of 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification and drawing. 16/SR/61SA/BLDG/2021-22/Q3W: 15 15/SR/61SA/BLDG/2021-22/Q3W: 25 09/SR/61SA/BLDG/2021-22/Q3W: 9

Providing and Fixing Factory made Adjustable (PVC) Doorframe of the size 65mm x 60mm with a wall thicknes of 4mm, made out of extruded 4mm PVC foam sheet, metre cut at two corners and joined with 2nos. of 150mm long brackets of 15 x 15mm M.S. Square tube. The two vertical door profile are to be reinforced with 40 x 20mm M.S. tube of 19 guage through out the frame. The doorframe shall be fixed to the wall using 65/100mm long M.S. Screw through the frame by using PVC fastners. A minimum of 4 nos. of screws to be provided for each vertical member & minimum 2 nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge. 16/SR/61SA/BLDG/2021-22/Q3W: 45 15/SR/61SA/BLDG/2021-22/Q3W: 75 09/SR/61SA/BLDG/2021-22/Q3W: 30

S&F Pressed steel frames 105x60mm size for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed 16/SR/61SA/BLDG/2021-22/Q3W: 36 09/SR/61SA/BLDG/2021-22/Q3W: 70

Mild steel angle iron door frame 40x40x6mm conforming to Fe 410.0 incl.12 mm dia deformed bars for strengthening at bottom of chowkhat incl.cutting floor to accommodate strengthening bar & making good in PCC(1:2:4) type B0. 16/SR/61SA/BLDG/2021-22/Q3W: 50

Cutting holes in stone / brick walls built in CM for inserting hold fast & making good dismantled portion in CM (1:3) depth of embeded portion of holdfast n. exc half brick 16/SR/61SA/BLDG/2021-22/Q3W: 36 15/SR/61SA/BLDG/2021-22/Q3W: 54 09/SR/61SA/BLDG/2021-22/Q3W: 50

M&L of 35 mm thick of second class hard wood Plain framed panelled shutters (any numbers of panels ) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density wood particle board with commercial face veneers supplied and fitted and fitted to chowkats 16/SR/61SA/BLDG/2021-22/Q3W: 15

S&F 100 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete. 16/SR/61SA/BLDG/2021-22/Q3W: 60 15/SR/61SA/BLDG/2021-22/Q3W: 54 09/SR/61SA/BLDG/2021-22/Q3W: 100

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section. 16/SR/61SA/BLDG/2021-22/Q3W: 20 15/SR/61SA/BLDG/2021-22/Q3W: 36

S&F aluminium anodised barrel tower bolt of extruded section and fixed of length 200 mm 16/SR/61SA/BLDG/2021-22/Q3W: 48

S&F aluminium alloy sliding door bolt with hasp staple, and fixing clips of sheet, cast orextruded sections or cast aluminium alloy and fixed of length of bolt 300 mm 16/SR/61SA/BLDG/2021-22/Q3W: 50

S&F Aluminium handles 125 mm size, . type, anodised 16/SR/61SA/BLDG/2021-22/Q3W: 20 15/SR/61SA/BLDG/2021-22/Q3W: 36

S&F aluminium handles cast type anodised of size 150 mm 16/SR/61SA/BLDG/2021-22/Q3W: 66

S&F MS spring hinges 300 mm, ordinary rat tail rod pattern including roller and roller plate complete fixed to wooden/ angle iron chowkats . 16/SR/61SA/BLDG/2021-22/Q3W: 7 15/SR/61SA/BLDG/2021-22/Q3W: 2

Demolition of PCC in roof covering, kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing treatment of any type all as directed by Engineer-in-charge. 16/SR/61SA/BLDG/2021-22/Q3W: 2.3 15/SR/61SA/BLDG/2021-22/Q3W: 15.5 09/SR/61SA/BLDG/2021-22/Q3W: 6.25

M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop with WPC @ 3% weight of cement. 16/SR/61SA/BLDG/2021-22/Q3W: 85 15/SR/61SA/BLDG/2021-22/Q3W: 600 09/SR/61SA/BLDG/2021-22/Q3W: 250

M&L for painting surface with one coat of polymeric primer @ 0.30 Kg per sqm, conforming to IS : 3384. A layer of APP based polymeric membrane, 3 mm thick (min), weighing not less than 3.5 Kg/m2 reinforced with polyster non woven fabric ( weighing not less than 150 gms/ Sqm). Application of polymeric membrane shall be by torch application all as per manufacturer instructions. and finally applying one coat of bitumen @ 1.2 kg/sqm on APP membrane before application of aluminium paint 16/SR/61SA/BLDG/2021-22/Q3W: 85 15/SR/61SA/BLDG/2021-22/Q3W: 600 09/SR/61SA/BLDG/2021-22/Q3W: 250

M&L one coat of aluminium paint over APP Membrane all as specified and directed by Engineer -in - chage 16/SR/61SA/BLDG/2021-22/Q3W: 85 15/SR/61SA/BLDG/2021-22/Q3W: 600 09/SR/61SA/BLDG/2021-22/Q3W: 250

M&L PCC 1:2:4 mix type B-0(using 12.5mm graded aggregates) as in roof kerbs rounded or chambered on edge. 16/SR/61SA/BLDG/2021-22/Q3W: 0.2 15/SR/61SA/BLDG/2021-22/Q3W: 0.5

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces and applying two coats of oil bound distemper of approved tint over 1mm thick wall care putty over ceiling . 16/SR/61SA/BLDG/2021-22/Q3W: 50

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces and applying two coats of oil bound distemper of approved tint over 1mm thick wall care putty over walls 16/SR/61SA/BLDG/2021-22/Q3W: 100 09/SR/61SA/BLDG/2021-22/Q3W: 200

M&L for preparing of old painted surfaces of wood or wood based materials of any description over 10 cm width or girth and applying on coat of synthetic enamel paint on wooden surfaces all as specified and directd by Engineer-in-Charge 16/SR/61SA/BLDG/2021-22/Q3W: 10

All as per Srl Mo. 79 above but one coat of paint on steel surfaces. 16/SR/61SA/BLDG/2021-22/Q3W: 10

M&L for preparation of old decorated plastered/ unplastered Surfaces of edges, facia & projection etc and applying two coat of Apex upto two storey building including scaffolding arrangement upto two storey building all as specified and directed by Engineer-in-charge. 16/SR/61SA/BLDG/2021-22/Q3W: 100

Demolition of Stone slabs in roofs, suspended floors, chajjas, landings, etc. any thickness, jointed in any mortar 16/SR/61SA/BLDG/2021-22/Q3W: 5

M&L for screed bed or bedding layer of cement mortar 1:4, 10mm thick for laying floor finishes. 16/SR/61SA/BLDG/2021-22/Q3W: 5

M&L Granite 16 to 18 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite 16/SR/61SA/BLDG/2021-22/Q3W: 5

Cutting holes into or through cement concrete slabs, chajjas, etc. reinforced or otherwise superficial area N exc 100 sq cm 16/SR/61SA/BLDG/2021-22/Q3W: 10

M&L Aluminium Powder coated frame for fixed type glazing and openable shutter with aluminium section weighing 0.55 Kg/Mtr incl. necessary joining, cleats, glazing clips, rubber packing powder coated aluminium snap beading, screws etc and beading for fixing of galvanised wire wire mess complete all as specified 16/SR/61SA/BLDG/2021-22/Q3W: 30 15/SR/61SA/BLDG/2021-22/Q3W: 30

Aluminium powder coated door/window shutter openable/ sliding type with aluminium section weighing 0.55 Kg/ Mtr incl. necessary joining, cleats, glazing clips, rubber packing aluminium powder coated snap beading, screws, handle & tower bolt etc complete all as specified 16/SR/61SA/BLDG/2021-22/Q3W: 5 15/SR/61SA/BLDG/2021-22/Q3W: 8

S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq.m in each pane 16/SR/61SA/BLDG/2021-22/Q3W: 4

M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces. 15/SR/61SA/BLDG/2021-22/Q3W: 70 09/SR/61SA/BLDG/2021-22/Q3W: 270

M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade on walls all as specified & directed by Engineer-in-Charge 15/SR/61SA/BLDG/2021-22/Q3W: 100 09/SR/61SA/BLDG/2021-22/Q3W: 270

M&L 35mm thick IInd class hard wood factory made plain, framed, paneled shutter (two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail & steel as per IS:1003 (Part-I) kiln seasoned & chemically pressure treated. 15/SR/61SA/BLDG/2021-22/Q3W: 6 09/SR/61SA/BLDG/2021-22/Q3W: 35

S & F Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats 15/SR/61SA/BLDG/2021-22/Q3W: 6 09/SR/61SA/BLDG/2021-22/Q3W: 20

S&F aluminium anodised floor door stopper overall length 140 mm double legged with rubber shoe, fixed to bottom rail of door as directed. 15/SR/61SA/BLDG/2021-22/Q3W: 2

M & L preparation of new surface & Applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth over a coat of pink primer 15/SR/61SA/BLDG/2021-22/Q3W: 15 09/SR/61SA/BLDG/2021-22/Q3W: 50

S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty/Rubber bidding in square n exc 0.5 sq.m in each pane 15/SR/61SA/BLDG/2021-22/Q3W: 5 09/SR/61SA/BLDG/2021-22/Q3W: 18

S&F Galvanised mild steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.18mm with tinned tacks, or galvanised wire staples complete 15/SR/61SA/BLDG/2021-22/Q3W: 12 09/SR/61SA/BLDG/2021-22/Q3W: 20

M&L Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome 15/SR/61SA/BLDG/2021-22/Q3W: 5

S&F Cast Iron sand cast soil, waste and vent pipe 75mm bore in any length with or without ears with cement joints fixed to walls 15/SR/61SA/BLDG/2021-22/Q3W: 20

S&F Cast Iron sand cast soil, waste and vent pipe 100mm bore in any length with or without ears with cement joints fixed to walls 15/SR/61SA/BLDG/2021-22/Q3W: 20

S&F Cast Iron bends any radius 75mm dia 15/SR/61SA/BLDG/2021-22/Q3W: 9

S&F Cast Iron bends any radius 100 mm dia 15/SR/61SA/BLDG/2021-22/Q3W: 9

S&F Cast Iron branch pieces single, (Single T) equal or unequal 75mm dia 15/SR/61SA/BLDG/2021-22/Q3W: 9

S&F Cast Iron branch pieces single, (Single T) equal or unequal 100mm dia 15/SR/61SA/BLDG/2021-22/Q3W: 9

S&F Cast Iron cowl 100mm dia 15/SR/61SA/BLDG/2021-22/Q3W: 9

M&L CP cast copper alloy bib taps two way with wall flange and aerator fancy type of 15 mm bore quarter turn (Make-CERA CAT PART NO CQ 606or equivalent of MARC, JAQUAR) fixed in repair. 15/SR/61SA/BLDG/2021-22/Q3W: 20

M&L Tooth brush holder/ Tumbler brass CP for putting bathroom utilities ((Make-CERA CAT PART NO CA 104or equivalent of MARC, JAQUAR) fixed in repair 15/SR/61SA/BLDG/2021-22/Q3W: 9

M&L Chromium plated angle stop cock with wall flange fancy type cast copper alloy 15 mm bore any colour (Make-CERA CAT PART NO CQ 608 or equivalent of MARC, JAQUAR) fixed in repair 15/SR/61SA/BLDG/2021-22/Q3W: 12

S&F 20 mm thick Granite slab black machine cut for making WHB Counter in bath rooms with making holes/ cutting for inserting Ovel type WHB bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including granding and polishing and making rounded edges etc. 15/SR/61SA/BLDG/2021-22/Q3W: 10

Demolition of old existing unserviceable Anglo Indian type (EWC) seat and S&F vitreous china wash down water closet pan ( Pedestal pattern ),white including connection to drain (or outgoing pipe) and to flushing pipe,anti-sypohonage pipe etc. & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete Make-EWC HINDWARE CAT PART NO 20053 TULIF or equivalent& CISTEREN HINDWARE CAT PART NO 21036 or equilant ) fixed in repair 15/SR/61SA/BLDG/2021-22/Q3W: 3

S&F in repair PVC valve less syphonic action type low level flushing cistern coloured with inlet ball valve float and .handle incl bracket 10 Lit capacity ( Make-HINDWARE CAT PART SLEEK PLUS or equivalent) fixed in repair 15/SR/61SA/BLDG/2021-22/Q3W: 9 09/SR/61SA/BLDG/2021-22/Q3W: 3

S&F in repairs vitreous china water closet Indian type 580 x 440 mm white with intergal footrest including provn of lime concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surface complete all as directed including flushing cistern and flushing pipe 15/SR/61SA/BLDG/2021-22/Q3W: 6 09/SR/61SA/BLDG/2021-22/Q3W: 3

Demolition of PCC in ground floors and pavings not exc 15cm thickness ( below or above ground level ) 15/SR/61SA/BLDG/2021-22/Q3W: 4 09/SR/61SA/BLDG/2021-22/Q3W: 11.85

S&F two track sliding shutter aluminium powder coated frame for doors, windows, ventilators with one of more rebates including joining cleat for fixing etc. Complete all as specified. 09/SR/61SA/BLDG/2021-22/Q3W: 60

S&F powder coated window and ventilators shutters side hung type without sash bars, alumimum section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised alumimium fittings such as peg stays 150 mm long (1 no) hinges type B-21 100 mm long (2 No) suitable handle (1 No) complete all as specified and directed. 09/SR/61SA/BLDG/2021-22/Q3W: 20

M&L Framed work such as grills gratings etc with ends of bars shouldered and / or riveted guard bars 09/SR/61SA/BLDG/2021-22/Q3W: 10

M&L Waste fittings size 32mm , brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed 09/SR/61SA/BLDG/2021-22/Q3W: 3

M&L 50 mm thick PCC type C-1 (1:3:6) using 20 mm graded stone aggregate finished even and smooth without using extra cement as in plinth protection 09/SR/61SA/BLDG/2021-22/Q3W: 65

S&F Coloured Non Skid ceramic tiles 6 to 7mm thick edge cut/ joint free (squares/ rectangular) area of each verticle tile exc. 0.11 sqm but not exc. 0.18 sqm, in on verticle surface etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 10mm thick Rendering screed in CM(1:4) 09/SR/61SA/BLDG/2021-22/Q3W: 12

S&F Coloured Non Skid ceramic tiles 6 to 7mm thick edge cut/ joint free (squares/ rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15mm thick screed in CM(1:4) 09/SR/61SA/BLDG/2021-22/Q3W: 120

Supply only Integral water proofing compound 09/SR/61SA/BLDG/2021-22/Q3W: 25

S&F sink made of stainless steel 1.0 mm thick for kitchen with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or with & including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410 x 330 x160 mm including waste pipe of polyethylene of low or high density or PVC 32mm dia & waste fitting brass chromium plated for 32mm bore with long screwed shanks and fly nuts including making holes in stone walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0 complete. 09/SR/61SA/BLDG/2021-22/Q3W: 3

S/F Vitreous China wash basin, white, flat back, size 550x400mm but including brackets, coupling and waste pipe complete 09/SR/61SA/BLDG/2021-22/Q3W: 3

S/F stop valves, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends fancy type chromium plated with long shank and cup (concealed type), 15 mm 09/SR/61SA/BLDG/2021-22/Q3W: 3

S/F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed-15mm 09/SR/61SA/BLDG/2021-22/Q3W: 3

S/F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, fancy type chromium plated long body complete. 09/SR/61SA/BLDG/2021-22/Q3W: 9

S/F PVC connections 15mm size with PTMT nuts of length 300mm 09/SR/61SA/BLDG/2021-22/Q3W: 9

M&L Chromium plated Overhead Rain shower with revolving joint and 115mm long shower arm with wall flange 15 mm bore fancy type any colour half turn fixed in repair 09/SR/61SA/BLDG/2021-22/Q3W: 3

Dismantling of old U/S grating of any description or size and S&F PVC grating 125mm dia of weight not less than 40gm for floor trap / Nahani trap. 09/SR/61SA/BLDG/2021-22/Q3W: 9

S&F Soap dish vitreous china white approximate size 160 x 160 x 90mm equivalent 09/SR/61SA/BLDG/2021-22/Q3W: 3

Preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and directed by engineer in charge 09/SR/61SA/BLDG/2021-22/Q3W: 95

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed by engineer in charge 09/SR/61SA/BLDG/2021-22/Q3W: 50

M/L for RCC 1:2:4 type BI (20 mm graded stone aggregate) nominal mix in slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves, Manhole/drain cover slab and the like 09/SR/61SA/BLDG/2021-22/Q3W: 1

S/F mild steel bars TMT 10 mm dia and over, cut to length,bent to shape required, including cranking, bending spirally for hooping for colmns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. 09/SR/61SA/BLDG/2021-22/Q3W: 50

M & L for 75 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregates as in sub-base to floor complete all as specified and directed by engineer in charge 09/SR/61SA/BLDG/2021-22/Q3W: 50

M/L Chequered cement concrete tiles 20cm X 20cm X 25mm thick set jointed and pointed in neat cement slurry in floor with grey cement and pigment over 15mm thick screed bed in cm (1:6) 09/SR/61SA/BLDG/2021-22/Q3W: 50

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landinqs and similar work; not exceeding 200 mm thick (Horizontal or sloping for flat. 09/SR/61SA/BLDG/2021-22/Q3W: 3

Use and waste formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide. 09/SR/61SA/BLDG/2021-22/Q3W: 3

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. 09/SR/61SA/BLDG/2021-22/Q3W: 5.5

M&L green marble work 18 to 20 mm thick table rubbed and polished) in steps, jambs, pillars, window cills, cookng platform and like in cement mortar (1:4) including pointing in white cement(1:2) using marble dust with admixture of pigment to match with marble shade over 15 mm thick screed bed in CM 1:4. 09/SR/61SA/BLDG/2021-22/Q3W: 55

M&L for preparing of oil painted surfaces of wood or wood based materials of any description over 10 cm width or girth and applying one coat of synethic enamel paint on wooden surfaces all as specified and directd by Engineer-in-Charge 09/SR/61SA/BLDG/2021-22/Q3W: 50

All as per Srl item No. 140 above but one coat of paint on steel surfaces. 09/SR/61SA/BLDG/2021-22/Q3W: 10

EM Portion Taking down carefully copper/ aluminum point wiring (light, fan, socket or power) complete including all fittings such as switches, ceiling roses, pendants, sockets, lamp holder, fan regulator brackets light fittings tube light fitting, bell/ buzzer etc (excluding fans) and making good disturbed surfaces of wall floors, ceiling etc complete all as specified and as directed by Engr-in-Charge to match with existing surface. 16/SR/61SA/BLDG/2021-22/Q3W: 53 15/SR/61SA/BLDG/2021-22/Q3W: 94 09/SR/61SA/BLDG/2021-22/Q3W: 30

M&L Point wiring complete with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and unsheathed cable inclosed in concealed conduit 20 mm dia medium grade with all accessories ISI marked, including MS sunken box for mounting fitting like switches, sockets fan regulators modulor type etc. including 1.5 sqmm single core PVC insulated but unsheathed copper earth continuty conductor to common earth and connected FRLS cable 1100 V grade as continuous earth wire to earth dolly for followings Make- Havells(std)/Bonton/Polycab/HPL

One light/fan/ bell point controlled by one, one way switch. 16/SR/61SA/BLDG/2021-22/Q3W: 42 15/SR/61SA/BLDG/2021-22/Q3W: 56 09/SR/61SA/BLDG/2021-22/Q3W: 24

One 3 pin 5 Amp socket outlet on same board with other switches. 16/SR/61SA/BLDG/2021-22/Q3W: 7 15/SR/61SA/BLDG/2021-22/Q3W: 12 09/SR/61SA/BLDG/2021-22/Q3W: 3

One socket outlet 6 amp controlled by one switch on independent board 15/SR/61SA/BLDG/2021-22/Q3W: 12

One bell point controlled by one bell push 15/SR/61SA/BLDG/2021-22/Q3W: 3

One light point controlled by two way switch 15/SR/61SA/BLDG/2021-22/Q3W: 2

All as per Item No 143 above but with 2.5 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 2.5 Sqmm copper cable continuous earth wire and connecting to common earth dolly. 16/SR/61SA/BLDG/2021-22/Q3W: 4 15/SR/61SA/BLDG/2021-22/Q3W: 9 09/SR/61SA/BLDG/2021-22/Q3W: 3

S&F switch, piano type 230/250 volts (Make ; Anchor or equivelent model in kinjal/bajaj/Phillips)

Single pole, one way 5 Amp rating 16/SR/61SA/BLDG/2021-22/Q3W: 42 15/SR/61SA/BLDG/2021-22/Q3W: 80 09/SR/61SA/BLDG/2021-22/Q3W: 27

Single pole, one way 15 Amp rating 16/SR/61SA/BLDG/2021-22/Q3W: 4 15/SR/61SA/BLDG/2021-22/Q3W: 9 09/SR/61SA/BLDG/2021-22/Q3W: 3

Bell Push, flush type, 6 Amp, 240 V 15/SR/61SA/BLDG/2021-22/Q3W: 3

Switch flush type, 6 Amp, Single pole, two way 15/SR/61SA/BLDG/2021-22/Q3W: 4

S&F Socket outlet multipurpose, flush mount type, 230/250 V Grade

Socket Outlet 2 in 1, 2 & 3 pin, 6 amp 16/SR/61SA/BLDG/2021-22/Q3W: 7 15/SR/61SA/BLDG/2021-22/Q3W: 24 09/SR/61SA/BLDG/2021-22/Q3W: 3

Socket Outlet 2 in 1, 3 & 6 pin, 16 amp 16/SR/61SA/BLDG/2021-22/Q3W: 4 15/SR/61SA/BLDG/2021-22/Q3W: 9 09/SR/61SA/BLDG/2021-22/Q3W: 3

M&L Angle Holder, insulated polycarbonate body with back plate complete 15/SR/61SA/BLDG/2021-22/Q3W: 12

M&L Ceiling rose surface bakelite 65x50mm, three terminals.Make Anchor/Legrand/Crabtree 16/SR/61SA/BLDG/2021-22/Q3W: 28 15/SR/61SA/BLDG/2021-22/Q3W: 28 09/SR/61SA/BLDG/2021-22/Q3W: 16

S&F hum free electronic step fan regulator 120-280 Volts, 100 Watt Capacity 15/SR/61SA/BLDG/2021-22/Q3W: 12

S&F door bell, AC 240 Volts, Single Pole 15/SR/61SA/BLDG/2021-22/Q3W: 3

Supply & fix lamp holder PVC body complete all as specified and directed with 01xLED bulb 9 watt 16/SR/61SA/BLDG/2021-22/Q3W: 14 09/SR/61SA/BLDG/2021-22/Q3W: 9

Supply & fix Exhaust fan 380 mm sweep complete all as specified and directed 16/SR/61SA/BLDG/2021-22/Q3W: 7 09/SR/61SA/BLDG/2021-22/Q3W: 3

Supply and fix heavy duty exhaust fan 300 mm size 220/240 Volt steel body 1400 RPM with mounting ring and louvers, incl three core flexible PVC insulated multi stranded copper conductor cable of size 1.5 sqmm from ceiling rose/connector to fan. Make - Havells, Model No- Turbo force or eqvt of Bajaj/CG 15/SR/61SA/BLDG/2021-22/Q3W: 3

Supply & fix LED retrofit lamp ( size-4 feet), Regal Batten for LED tube, universal batten for T5 lamps surface/wall mounting IP 20 with twin core twisted flexible copper conductor cable with suitable size. Make - Havells cat No - REGALBATTENT5UPTO1X18WDSBSWH Or equivelent model in Bajaj/Wipro/ Philips/CG /Surya roshni 16/SR/61SA/BLDG/2021-22/Q3W: 14

Supply & fixing Mirror surface mounted LED fitting 10 W (2 Feet)provided with a high output PMMA diffuser for glare free light , IP 20 with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make - Crompton/ Bajaj/Havells/ Philips/Wipro/Siska /Shakti fixture 16/SR/61SA/BLDG/2021-22/Q3W: 7

S&F in repair factory made, sheet distribution boards, SP&N 8 ways, double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps, copper bus bar of the under mentioned rating :- 16/SR/61SA/BLDG/2021-22/Q3W: 2 09/SR/61SA/BLDG/2021-22/Q3W: 3

S&F in repair factory made, sheet distribution boards, SP&N 12 ways, double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps, copper bus bar of mentioned rating 15/SR/61SA/BLDG/2021-22/Q3W: 3

S&Fin repair MCB 10 KA confirming to IS-8828 : 1996, IEC-898 : 1995 rupturing capacity of the under mentioned type and rating :-

SP 5 to 32 amps 16/SR/61SA/BLDG/2021-22/Q3W: 10 15/SR/61SA/BLDG/2021-22/Q3W: 27 09/SR/61SA/BLDG/2021-22/Q3W: 18

SPN 32 to 63 amps. 16/SR/61SA/BLDG/2021-22/Q3W: 2 15/SR/61SA/BLDG/2021-22/Q3W: 3 09/SR/61SA/BLDG/2021-22/Q3W: 3

M & L Sub main wiring complete with 2 runs of 6 Sqmm single core PVC insulated unsheathed cable 1100 V grade with multistranded copper conductor ISI marked drawn throughn and including PVC rigid conduit/casing capping and conduit accessories fixed on surface/wall celing etc including provision of 1 run of 4 Sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity. 16/SR/61SA/BLDG/2021-22/Q3W: 30 15/SR/61SA/BLDG/2021-22/Q3W: 30

Supply & fixing Energy saving envirnmental friendly, LED Light fittings 1 x 20 W 1200mm E lite LED Curve, high lumen batten with efficacy of 100+ lumens , impact proof,surface/wall mounting with PC housing in opal finish suitable for wet location with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make Havells Cat No LHEXBXPNIN1W020 or equivalent in Syska/Crompton/Bajaj. 15/SR/61SA/BLDG/2021-22/Q3W: 14

Supply & fixing , LED Light fittings 1 x 10W ,240 volt( size-2 feet/600 mm) , long life, corrosion resistant , surface/wall mounting IP 66 luminaire with PC housing in opal finish suitable for wet location with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make Havells Cat No LHEXARP7PN1W009 or equivalent in Syska/Crompton/Bajaj. 15/SR/61SA/BLDG/2021-22/Q3W: 6

Supply & fix wall Bracket light CITY-1 made of polycarbonate body suitable for 15 watt retrofit LED B22 Base including including 10W LED Lamp with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make Havells Cat No LHDL02160099 or equivelent model in Bajaj/ Philips/Syska. 15/SR/61SA/BLDG/2021-22/Q3W: 6

M&L earthing complete all as per electrical plate No.3 of MES SSR Part-I with galvanised steel plate electrode 60cm x 60 cm x 6.0mm thick, buried directly vertically in ground in a pit depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level connected to and including galvanised iron or steel earth strip 25mm x 4mm by means of bolts , nuts, check nuts and washer of galvanised iron or steel pipe 40mm bore light grade and connected to continuous earth wire on pole/test point with 32 mm dia GI light grade protection pipe to main board. Watering pipe shall be 32mm GI medium grade. The earthing shall be of inclusive of excavation & earth work in any type of soil, charcoal, salt, funnel, PCC pit and RCC cover complete all as specified & directed tested 15/SR/61SA/BLDG/2021-22/Q3W: 3

Supply & fix LED retrofit lamp ( size-4 feet), Regal Batten for LED tube, universal batten for T5 lamps surface/wall mounting IP 20 with twin core twisted flexible copper conductor cable with suitable size. Make - Havells cat No - REGALBATTENT5UPTO1X18WDSBSWH Or equivelent model in Bajaj/Wipro/ Philips/CG /Surya roshni 09/SR/61SA/BLDG/2021-22/Q3W: 12

Supply & fixing Mirror surface mounted LED fitting 10 W (2 Feet)provided with a high output PMMA diffuser for glare free light , IP 20 with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make - Crompton/ Bajaj/Havells/ Philips/Wipro/Siska /Shakti fixture 09/SR/61SA/BLDG/2021-22/Q3W: 6

UNIVERSAL INFRAPROJECT PVT LTD

M/S JALANDRA CONSTRUCTIONS

Baradwal Construction Company

JAGDAMBA CONSTRUCTION COMPANY