SPECIAL REPAIR TO OR MD ACCN NO P-81/01-08 (OR MD ACCN) AT FD BTY LINES HELD IN CHARGE OF 2/3 GR MORAR CANTT UNDER GE GWALIOR

Amount

Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed.

Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 sqm and not exc 4.00 sqm each , removing from the site Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed.

S&F solid PVC door frame of size 50mm×47 mm made out of 5 mm pre laminated colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specifications and drawings complete all as specified and directed.

S&F MS Pressed steel frames for doors with one or more redates including necessary fixing lugs hinges lock strike plate etc complete as specified abd size of frame 105x60mm complete.note : cost of filling of PCC (1:3:6) type C-0 in hollow portion of frame id deemed included in these items complete all as specified and directed.

S&F MS Pressed steel frames for doors with one or more redates including necessary fixing lugs hinges lock strike plate etc complete as specified abd size of frame 125x60mm complete all as specified and directed. Note : cost of filling of PCC (1:3:6) type C-0 in hollow portion of frame id deemed included in these items

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails M.S frame shall be covered with heat moulded pre lam colour PVC 'C' channel having a PVC shut strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail& bottom rail, panelling of pre lamanited colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

S&F for factory made 35 mm 2nd class Hard Wood, plain framed factory made panelled shutters ( two panel) with lock rail and panel of 9mm B.W.R grade ply or 12mm MDF board exterier grade medium density, wood particle board with commercial veneering on both face IS 1003 ( Part-I) kiln seasoned and chemically pressured treated complete all as specified and directed.

S&F 35 mm thick factory made glazed and skelton shutters 2nd class HW open rebated and prepared to receive gauage (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred bead for security glass etc. Size of members of shutters as spd in IS 1003 supplied and fitted to chowkhats all as spd and directed into squareincluding preparation of the surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F, Box type steel ventilator with top hung shutters (double shutters for glass and guaze) jointed together with an including grills using 12mm square bars @10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed and welded and Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed. complete all as specified and as directed. Note : Glass/guage shall be measured and paid separately under respective item.

S&F, Box type steel windows with side hung shutters (double shutters for glass and guaze) jointed together with an including grills using 12mm square bars @10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed and welded complete all as specified and as directed. Note : Glass/guage shall be measured and paid separately under respective item.

S&F galvanised wire cloth, .63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised staples complete all as specified and directed

S&F Sheet glass figured quality and glazing with oil putty in square but not exc. 0.5 sqm in each pane 3 mm thick complete all as specified and directed.

S&F Plain Sheet glass ordinary quality and glazing with oil putty in square but not exc. 0.5 sqm in each pane 3 mm thick complete all as specified and directed.

Dismantling boarding any description fixed with nails in any position (including cup board shutter/shelve upto 25mm thick) complete all as specified and directed.

S&F 18 mm thick PVC Celuka ply of both side prelaminated and other side plain white colour fixed with screws ,solvent cement /adehesive to make kitchen cabinet partion ,shelves ,shutter, drawer etc complete as per specified and as directed. Make : Kitply/ Rajshree.

S&F Aluminium anodised barrel tower bolt of 200mm of extruded section complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of 150mm of extruded section complete all as specified and directed. .

S & F Haps and staple safety type Aluminium anodised with MS hinge pin including bbolt to hinge pin of 100 mm size sixed with screw complete all as specified and directed.

S & F Magnate catcher of metal body and striking plate heavy duty includind fixed with screw complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvenised of not exc 25 mm flaps complete all as specified and directed.

S&F Aluminium alloy anodised sliding door bolt of 250mm with haps, staple ( bolt type ) & fixing clips of sheet etc complete all as specified and directed.

S&F MS Sliding door bolts Rod pattern stove enamelled black with bolts not less than 12mm dia with and including a minimum of 6 bolt and nuts four on bolt plate and two on staple plate of 250mm size complete all as specified and directed.

S&F Alluminium butt hinges of 100mm size type C-22 complete all as specified and directed.

S&F MS 150 mm ordinary rat tail springs plate type incl.rollar plate etc complete all as specified and directed.

S&F Extruded aluminium alloy handle of 125mm size fabricated type, anodised complete all as specified and directed.

Taking down existing tarfelt from roof and removing from site complete all as specified and directed.

M&L for 10 mm thick rendering in CM (1:4) over roof ,surface finished even and rough mixed with water proofing compond complete all as speceified and as directed. Note : Water proofing compound shall be measured and paid separately

M &L For applying water proofing treatment with the following coats :- (a) First coat of bitumen primer conforming to IS -3384 @ 0.4 Kg/sqm (b) Second Layer of APP based polymectric membrane minimum weighing 3kg /sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms /sqm ) land on primed surface by torch application complete all as specified and as directed by Engineer in charge.

M & L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado, pcc tiles at roof etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L, precast cement concrete tiles of size 250mm x 250mm x 20 mm as in foor top ,confirming to IS-1237-1980 laid over 15 mm thick screed bed in CM 1:4 and set, jointed and pointed in neat cement slurry in floors, and cut & plished between tiles 2 to 3 mm will be filled with cement mortar (1:2) by mixing of chemical or equilant approved by the GE etc complete all as specified and as directed.

M & L PCC (1:2:4) Type Bo using 12.5 mm graded stone agg as levelling course/mass concrete complete all as specified and directed.

M&L Granite slab 18 mm to 20 mm thick machine cut, bedded and joined with cement and pointed with white cement with admixture of pigment to match over and including 20 mm thick screed bed CM (1:3) .the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps cooking plateforms includigng rounding off the exposed edges and polishing complete all as specified and directed.

M&L for machine cut Kota stone slab 20mm to 25 mm thick , as in flooring , laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing , over and including screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:3 ) complete all as specified and directed.

M&L for machine cut kota stone slab 20mm -25 mm thick as in riser / steps, skirting, dado,cills and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing over and including 10 mm thick backing coat in CM (1:3) complete all as specified and directed.

M&L for digital glazed ceramic tiles, coloured tiles 300mm x 450mm x 7 to 8 mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and directed.

M&L for non skid ceramic Coloured tiles, 300mmx300mmx 6 mm to 7 mm thick, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar( 1:4) complete all as specified and directed.

M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and including 15 mm thick cement screed in (1:4) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L for ceramic tiles, joint free, coloured tiles 7mm to 8 mm mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:3 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.with the colour of tiles complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water etc. complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces , applied in two layers ie. Ist layer of 10 mm thick rendering in cement mortar (1:6 ) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 ) and top layer mixed with water proofing compound as per manufacturer's instruction & finished even and smooth without using extra cement including taking down existing cement plaster of any description and in any position and racking out joints, hacking for key, scrubbing down with water etc & prepared to receive new plaster complete all as specified and directed. Note:- Water proofing compound shall be measured and paid seperately

M&L10mm Rendering with CM (1:4) over brick/concrete could surface fair & even surface complete all as specified and directed.

Supply only Integral water proofing compound complete all as specified and directed.

M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered sufaces of walls & applying 2 coat of cement base paint complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of walls & applying three coats of white wash on wall surfaces complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of ceiling & applying 3 coats of white wash on ceiling surfaces complete all as specified and directed.

M & L two coat of oil bound distemper over a coat of Birla wall care putty on plastered surfaces on wall incl. preparation of surfaces etc complete all as specified and directed.

M&L applying for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified and directed.

M&L applying for two coats of synthetic enamel paint over a coat of red oxide primer on old steel surfaces over 10 cm width or girth including preparation of surfaces complete all as specified and directed.

Complete removal of existing treatment on wall (any number of layers ) by scarping with steel scapers or any other mean including filling depessions of scapped surface with putty and pereparation of surface for further treatment and M&L for two coats of distemper oil emlusion white or tinted over a one coat of wall care putty on walls ccomplete all as specified and directed.

Preparation of old decorated surface of ceiling and including cornices plastered or unplastered surfaces by brooming down or steel wire brushing to remove all loose scales, and foreign materials scarping down , smoke soot moulds , moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash complete all as specified and directed.

Demolition of brickwork or stone/ boulders masonry built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc. but not excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

Reinforced cement concrete (normal mix) (20mm graded aggregates) as in shelves etc complete all as specified and directed.

S&F TMT bars 6 to 8 mm dia cut to length bent to shape required including cracking,bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel conforming to Fe-410-0 or Fe-410-S complete all as specified and directed.

M&L providing precast concrete as in cover slab, lintel etc using RCC (1:2:4) with 20mm graded stone agg including all form mould etc complete all as specified and directed.

M&L Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 20mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 25mm bore of pipe complete all as specified and directed.

supply and laying 20 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall ,ceiling or laid in floors complete all as specified and as directed by Engineer in charge .

Supply and laying 25 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall ,ceiling or laid in floors complete all as specified and as directed by Engineer in charge .

S&F in repairs 110mm dia PVC(SWR) type B pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and directed.

S&F in repairs 75 mm dia PVC(SWR) type B pipes single socketed, in any length with rubber ring joints,fixed in Wall/laid in floor complete all as specified and directed.

S&F 110mm dia PVC(SWR)pipes bends any radious with acces door complete all as specified and directed.

S&F 75 mm dia PVC(SWR)pipes bends any radious.with acces door complete all as specified and directed.

S&F 110mm dia PVC(SWR)pipes junction,single (single T/Y ) equal or unequal any radious.with acces door complete all as specified and directed.

S&F 110mm dia PVC(SWR) vent cowl complete all as specified and directed.

M & L in repair 75 mm dia of out let PVC (SWR) floor trap plain with cp grating incl. jointing with solvent cement complete all as specified and directed.

M & L in repair PVC (SWR) gully trap 125 /100 plain with grating incl. jointing with solvent cement complete all as specified and directed.

Supply only 10 litres capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve,float end handle handle including bracket complete all as specified and directed. Make :- Prayag/Pearl/Parryware

S&F in repair 15mm angle cock chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and directed. Make : Neptune series of Prayag/ Pearl/Parryware

S&F in repair stop valve screwed down high pressure with CAPSTON HEAD handle chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe 15mm bore or for unions and fixed complete all as specified and directed. Make : Neptune series of Prayag/ Pearl/Parryware

S&F in repair 15mm ,bib tap Fancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed complete all as specified and directed. Make : Neptune series of Prayag/ Pearl/Parryware

Supply only 15mm,pillar taps fancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and directed. Make : Neptune series of Prayag/ Pearl/Parryware

S&F in repair for shower rose brass chromium plated without swivel joints, 100 mm in size including fixing to steel pipe complete all as specified and directed. Make :- Prayag/Pearl/Parryware

M&L vitreous china squatting pan, orissa pattern sise 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe to complete fixed in repairs and making good to floor complete all as specified and directed. Make :- Prayag/Pearl/Parryware

S&F of vitreous china wash basin, white, flat back, size 550 x 400mm Including waste coupling ,waste pipe and labour for fixing pillar tap ,pvc connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. Make :- Prayag/Pearl/Parryware Note : Pillar tap and PVC connection will be measured paid as supply only.

Supply only 15mm dia PVC connection with PTMT nuts of length 450 mm complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12 cm wide with CP bracket guard and railing 60 cm long complete all as specified and directed.

S&F Soap dish of CP fixed with pvc rawal plugs and screw complete all as specified and directed

S &F Tublar towel rail 20mm dia D type 60 cm long between flange Brass CP complete all as specified and directed.

S & F Peg set of six S.S. fixed to wall with PVC plugs and screw complete all as specified and directed.

S & F in repair Curtain rail stainless steel decorative type 25 mm dia including fixing bracket and end knobs complete specified and diected by Engineer in charge.

Dismantling water tanks of any description and in any position , of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and directed.

S&F Rotational moulded poly-ethylene Three layered insulation puff tanks (cylinderical vertical ) 500 litres capacity, white colour hoisted and fixed in position complete all as specified and directed.

S & F 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S & F in repair gun metal globe / gate value with iron wheel head screwed both ends for iron pipe of 20mm bore complete all as specified and directed.

S&F for stainless steel plate rack for utensils of size (31 x 30 x 10) inch & standard superior quality complete all as specified and as directed by the Engineer-in-Charge. Make :- Prayag : cat no P-348/Pearl/Parryware

S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plug washer and waste coupling, waste pipe including bedding in CM to dwarf wall or including fixing cantilever brackets and connections to pipe over all size 915mmx460mm built size 410mmx330x160mm complete all as specified and directed. Make :- Prayag/Pearl/Parryware

Surface excavation n.exc. 30 cm deep and av. 15 cm deep and getting out in any type of soil complete all as specified and directed.

M&L PCC Type D2 (1:4:8) using 40mm graded stone agg as in foundation filling mass concrete complete all as specified and directed.

M&L for sand filling under floor or in foundation including watering and consolidation as required complete all as specified and direted,

Material and labour for machine made ,1st quality, precast cement concrete rubber moulded coloured interlocking paver blocks / tiles , 80mm thick of grade M-40, of any shape or shap and designe as approved, with grey cement and pigment , laid over fixed as in floors/ paths/ pavings etc, complete all as specified and directed.

M&L fir cement concrete ( 1:2:4) type B-1 (20mm graded agrregate) in lintels upto 1.5m clear span, cills, stes, seimic and other similar bands, plinth course, string course, lacing cours, arapets and railings upto 60cm in height, coping, kneelers, apex stones, bed plates, kerbs, water througs and the like including wheathering slightly rounded or chamfered angle and throating complete all as specified and directed.

Demolition of cement concrete of any description and in any position (unreinforced) in ground floors/ paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed.

M&L 10mm thick rendring with CM (1:3) over wall/floor surface even and smooth mixed with WPC complete all as specified and directed.

M&L for providing two coats of water proof coating of pidifine 2K of Dr. fixid or euivelent in other make complete all as specified and directed.

M&L for 75mm thick PCC (1:2:4) Type C2 using 40mm graded stone agg as in plinth protection surface even and fair without using extra cement including forming & filling expension joints 65 mm deep x 10 mm wide filled with sealing compound grade A complete all as specified and as diected

M&L for 15 mm thick dubbing coat in Cement Mortar (1:4) on ceiling surface complete all as specified and directed.

S & F Small fittins such as brackets of any type latch and hinges blocks shaped door and window stops including all necessary labours articals nexc 200 cu.cm each of II nd class HW complete all as specified and directed.

M&L ,Prepartion of New/Old plastered surfaces of walls ,chajjas and applying two coats of weather proof water based emulsion paint (Acrylic paint exterior grade ) complete all as specified and directed in by engineer in charge.

S&F floor door stopper of aluminium alloy body and tongue ,anodised with hard drawn steel spring,150mm long, fixed in floor complete all as specified and directed.

M&L for preparation surfaces for building Nos and applying one coat of synthetic enamel paint and writing letters or figures (Block, Roman, Italic or Indian) of n exc 10cm height, width of letter shall not be less than 15mm, including stops, commas, lines, brackets and making outer boarder with approved tint of synthetic enamel thick paint complete all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed.

S&F framed work such as grills gratings, etc, with ends of bars shouldered and or riveted , or forged into spikes, framed guard bars , barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 250 E-165 complete all as specified and directed.

M & L for Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators,sockets,light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed

M & L for point wiring with 1.5 sqmm (Nominal Area)PVC insulated FRLS un sheathed multi stranded copper conductor drawn in and including non metalic rigid PVC concealed conduit of med grade of suitable size with all fitings and accessories including factory made MS/ pressed steel terminal box with zinc coated duly concealed in wall including modular metal flush boxes reqd as per site reqmt for mounting switches, sockets fan regulators etc including continuous earth wire PVC insulated 1.5 Sq mm FRLS copper conductor connecting to common earth and earth dolly complete all as specified and directed :- Make For Conduit : - AKG/ Atul/ Kalinga/Precision/Modi Make For Wire : Havells/ Polycab/ Finolex /RPG / V-GUARD /KEI

For one light point controlled by one switch complete all as specified and directed

For one light point controlled by 2- two way switch complete all as specified and directed

For one fan point controlled by one switch complete all as specified and directed

For One Bell/Buzzer point controlled by one way 5 Amp push button switch complete all as specified and directed.

For one 5 pin socket out let 5 amps on same bd complete complete all as specified and directed.

For one 5 pin socket out let 5 amps on independent board complete all as specified and directed. .

All as per item above here in before but with cable 2.5 sqmm FRLS (nominal area) multi stranded copper wire unsheathed for one 5 pin socket out let 15 amps on independent board including continuous earth wire PVC insulated 2.5 sqmm copper multistranded conductor connecting to common earth and earth dolly complete all as specified and directed.

Supply and fixing ceiling rose surface bakelite 3 terminals 65x50mm complete all as specified and directed.

S & F modular white cover plate with frame of 12 module complete all as specified and directed.

S & F modular white cover plate with frame of 04 module complete all as specified and directed.

S & F modular white cover plate with frame of 03 module complete all as specified and directed.

S&F Modular switch 1 way 06 amp single pole complete all as specified and directed.

S&F Modular switch 2 way 06 amp single pole complete all as specified and directed.

S & F modular switch socket combination 16A, 6 Pin of 3 module complete all as specified and directed.

S & F of modular socket outlet 6A-5 pin combined of 02 module complete all as specified and directed.

S & of moduar bell push 6 Amp 1 module complete all as specified and directed.

S & F of modular fan step regulator 120 W-2 module complete all as specified and directed.

S&F of buzzer Ding Dong, AC, 230 Volts, single pole complete all as specified and directed.

S&F Lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings incl LED Bulb 09/10W complete all as specified and directed. Make of Lamp Holder :- Leader/Legrand/Havells. Make of LED Bulb :- Philips, Wipro, Havells.

S&F Ultra bright LED Tubelight fittings complete of 20 w incluing req length of 1.5 Sqmm PVC multistranded copper conductor ro electrical connection from ceiling rose to connector of LED fitting including testing on completion complete all as specified and directed. . Make of LED fittings :- Philips, Wipro, Havells.

S & F security light fittings better optics for uniform distribution IP 65 protection LED of 25 watt, Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mtr fixed to wall with 02 Nos FI clamps made of 40 x 6 mm FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqd length of 1.5 Sqmm PVC multistranded copper conductor for connection from ceiling rose to light fittings incl testing on complete all as specified and directed. Make of LED fittings :- Philips, Wipro, Havells.

M & L for Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store including painting with two coat of synthetic enamel paint over one caot of primr including wirting of MES No and refixing the same complete all as specified and directed.

Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed.

M&L, sub main wiring with two single core PVC insulated unsheathed FRLS multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLS copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. (NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface.

S&F, in repair, MCB DB, sheet metal enclosures double door SPN 8 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

S&F, MCB SPN 40 Amps, 240 volts 'B' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed.

S&F, MCB SP 240 volts, 6 to 32 Amps, 'B' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed.

Supply, install, commissioning and installation of distribution meter box indoor type, factory made out of CRCA sheet 2mm thick with angle iron 30x30x2 mm complete with inside, outside powder coated independed housing for meters with transperent glass & rubber gasket packing with suitable size copper single/ two core wire for each control, cable gland, with 200 Amp rated TPN aluminium busbar (for outgoing) duly insulated (including self insulated) maintaining proper space for each busbar and grouting panel in wall etc complete including locking arrangement and comprising for following fittings incl taking down existing MCB DB TPN 4 way:- (i) MCCB TPN, 63 Amps ,16 KA - 01 No (For incoming) (ii) Amp Meter (0-100 Amp)- 01 Nos Make :AE (iii) Volts Meter (0-500 Volts ) - 01 No Make :AE (iv) Indicator Lamp set of three R,Y,B - 01 Set (v) ASS & VSS with CTs -02 Nos ( 01 Each) (vi) MCB SP 40 Amps, 230 volts - 04 Nos (For outgoing) (vii) Nutral bus bar link mounted on insulator. (viii) Place for fixing the energy meter. - 04 Nos (ix) The quoted rate is inclusive of removing the existing electric meter from the building and re fixing the same in the sheet metal enclosure at the same location without any damage to the meter.

Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable (Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area of following size :-(a) 25 Sqmm 4 Core

Excavation in trenches n exc. 1.5 m wide and n' exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

M&L sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete all as specified and directed.

M&L bricks, old size sub class `B' laid in trenches with width wise along the alignment of the cable as protection complete all as specified and directed.

Returning, filling of excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and directed.

Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

S&F tube 'Light' grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe etc complete all as specified and directed.

S&F in repair GI Medium grade tubing with all fittings laying in trenches all as specified and directed including taking down old u/s one of the following sizes :-

80 mm bore complete all as specified and directed.

50 mm bore complete all as specified and directed.

40mm bore complete all as specified and directed.

20mm bore complete all as specified and directed.

S&F in repairs gun metal gate valves/globe valve with iron wheel head, screwed both ends for iron pipe of the following sizes including taking down old u/s one of the following sizes :-

80 mm bore complete all as specified and directed.

50 mm bore complete all as specified and directed.

40mm bore complete all as specified and directed.

20mm bore complete all as specified and directed.

M&L for cutting of existing CI/DI/GI pipe line any size 8uppto 150 mm bore) including exc and earthwork, inserting CI/DI/GI special any size & shape all as specified and directed. ( CI/DI/GI special including jointing will be included in quoted rate). Contractor to make arrangements to drain out/pump out accumulated water without any extra cost)

M&L for construction of valve chamber in brick work bought up to course built in cement ,ortar (1:6) with MS sheet cover in CM 1:4 with MS sheet cover 3.15mm thick and angle iron 50X50X6mm with locking arrangment including excavation and earth work in any type of soil, PCC (1:4:8) type D2 for foundation, PCC (1:2:4) type B for bed/coping, Plastering 15mm thick in CM 1:4 painting all steel surfaces with two coats of bituminous black paint over a coat of anti corrosive re-oxide primer complete all as specified and directed and as shown on drawings of size 900X900X900 mm

M/S MAHAVIR SINGH

M.S. ENGINEERS

Babatia super works