Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.0 LAccepted-AOC 1 SANCHAR NAGAR NEAR KRISHI UPAJ MANDI DAMOH ROAD JABALPUR M P | JABALPUR | MADHYA PRADESH | 482001 | L1 | Accepted-AOC BEING LOWEST BIDDER | |
| 2 | L2₹37.6 L+₹98,575 (2.69%)Rejected-Finance 116 JAI BHEEM NAGAR POLIPATHAR GWARIGHAT ROAD JABALPUR MP 482008 | JABALPUR | MADHYA PRADESH | 482008 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹38.8 L+₹2.1 L (5.86%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹41 L
EMD Value
₹82,000
Closing Date
3 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE JABALPUR
HQ CWE JABALPUR OPPOSITE SUPPLY DEPOT SADAR JABALPUR 482001
ADDITION/ALTERATION TO BLDG NO P-3 AND T-123 OF HQ MB AREA JABALPUR UNDER GE (WEST) JABALPUR
2024_MES_658385_1
81058/E8
Open Tender
Civil Works
Item Rate
270 days
JABALPUR
AS PER NIT
7 documents required · 7 mandatory
₹500
Yes
GE WEST JABALPUR
₹82,000
Yes
20 Sept 2024
7 Jun 2024
5 Jul 2024
7 Jun 2024
3 Jul 2024
21 Jun 2024
7 Jun 2024 - 20 Jun 2024
Amount
Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness including part chipping (below or above ground level) complete all as specified and directed.
Dismantling of wall tile, floor tile, dado including bedding but backing and rubbish off permises complete all as specified and directed.
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed.
M&L 25 mm thick cement concrete (1:2:4), type B-0, using 12.50 mm graded aggregate as in floors including finishing the surface rough & even for receiving kota/tiles complete all as specified and directed.
M & L for Cement concrete (1:2:4) type B-1,using 20 mm graded stone aggregate as in flooring 75 mm thick and finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) dark shade/double charged/ultra charged polished, nano tech, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ( in patches to match the existing colour /shed) laid over and including bedding layer of cement mortar 1:6, 15 mm thick for laying ceramic tiles/granite floor finishes complete all as specified and directed.
M&L for machine cut Kota stone slab flooring, 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing (granite finish) and exposed edges of Kota stone shall be rounded including 20mm thick screed bed to floor finishes in CM(1:6) complete all as specified and directed.
M&L for Polishing the existing old kota stone flooring including preparation, grinding and polishing in floors complete all as specified and directed.
M&L Virified Ceramic tiles 10 mm thick (square/ rectangular) dark shade/double charged/ultra charged polished, nano tech, area of each tiles not exceeding 0.36 sqm, in vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ( in patches to match the existing colour /shed) laid over and including bedding layer of cement mortar 1:4, 10 mm thick for laying ceramic tiles/granite floor finishes complete all as specified and directed.
M&L for non skid ceramic coloured joint free tiles 10 mm thick area of each tile exceedeing 0.18 sqm but n.exc 0.38 sqm (600x600), in floors, set and jointed in neat cement slurry and pointed in white cement laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.
M&L for non skid ceramic coloured joint free tiles 10 mm thick area of each tile exceedeing 0.18 sqm but n.exc 0.38 sqm (600x600), as in vertical surfaces such as skirting / dado set and jointed in neat cement slurry and pointed in white cement laid over and including 10 mm thick backing in CM (1:4) complete all as specified and directed.
M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.11 sqm and not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed with white or coloured cement to match, laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.
Material and labour for Glazed ceramic tiles of size 350x 250x 7mm/ 450X 350X 7mm thick in vertical surfaces such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick rendering in CM 1:4 all as specified
M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed. (571.40-129.70+31.90=473.60)
Dismantling brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed.
M&L Brick work with sub class 'B' fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.
Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.
M&L 15 mm thick rendering on fair faces of bk /concrete surfaces in CM (1:6), finished even and smooth (without using extra cement ) complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. (Note : Liquid WPC will be measured and paid separately as "Supply only".)
Supply only liquid water proofing compound ISI Marked, of make as approved by GE complete all as specified & directed.
M&L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete all as specified and directed.
M&L for IInd class (Indian Sal, Bijasal, Hollock or Benteak) hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified & directed.
M&L for factory made second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood glazed and skeleton shutters 30mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats complete all as specified & directed. Notes:- (i) glazing will be measured and paid for separately. (ii) Butt hinge will be measured and paid for separately .
M&L for factory made 35mm thick second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood plain, framed, panelled shutter (two or three panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces; size of rail and stiles as per IS: 1003 (Part-I), kiln seasoned complete all as specified & directed.
S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed.
S&F for extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.
Butt hinges 100mm, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.
S&F, Mild steel sliding door bolts 300mm size, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
S&F mild steel, ordinary helical door spring incl roller and roller plate complete all as specified and directed.
S&F Floor 40-50 mm door stopper of aluminium alloy body and tongue anodised with hard steel spring ,fixed in floor complete
S&F stainless steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified and directed.
S&F 25mm dia MS Powder coated dropary rod including brackets of approved quality etc complete.
S&F Fancy type Knob suitable for 25mm dia Dropery rod complete all as specified and directed.
M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of primer complete all as specified and directed.
M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.
M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.
M&L for preparing new plastered or un-plastered surfaces of walls and applying two coats of oil bound distemper with wall care putty over a coat of chalk whitining on walls complete all as specified and directed.
M&L for preparation of old decorated surfaces of walls by complete removal of existing treatment and applying two coats of oil bound distemper over 2mm thick wall care putty in two layers over a coat of chalk whitining on walls complete all as specified and directed.
M&L preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of appropriate primer complete all as specified and directed.
Preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified and directed.
Prepration of newly plastered surfaces and applying three coat of white wash on ceiling all as specified.
S&F framed work as in doors or gates of angle or other section with gusset plates ,rails,braces etc complete drilled for fixing of steel gate sheeting or other covering,doors ,etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering ,runing rails and guides ) and hanging also fastning and fixing complete all as specified and directed. conforming to FE-290 ( Gde E-165) complete all as specified and directed.
M & L for snap grid false ceiling system of E board exposed suspended system, grid size 600mm x 600mm compressing of GI powder coated Main Runner of dimensions 39mm x 24mm x 0.8 mm thick to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with butterfly clips (wt-0.007 kg/clip), hold down clips (wt-0.0035 kg/clip), and fixed with pre painted 4mm thick E board of approved design and with provn of light fixture complete all as per manufacturer instructions and as directed.
Supply and fix figured glass ordinary quality 5.5mm thick in square not exc 0.50 Sqm each pane fixing in aluminium window including hacking out glass complete all as specified.
S&F in repair Mortice lock,vertical type size 100 mm 4 lever suitable for aluminium door including fixing with stainless steel screw as complete all as specified and directed
M&L for floor door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed to aluminium door etc. complete all as specified and directed.
S&F for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing or for Aluminium Door bottom portion complete.
S&F in repair 150 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete.
S&F of aluminium powder coated section, as in frame for door, window, ventilators,fix glazing and partitions of standard section and thickness as directed , cut and jointed together with cadium plated steel screws, plugs for fixing screws, etc. complete all as specified and as directed by the Engineer-in-Charge. Note-(i) Fixing of frame shall be as per manufacturers instructions and all fitting shall be paid under this item. (ii) Thickness of powder coating shall not be less than 50 micron. (iii) Frame shall be one or more rebate as per requirement at site.
Supply and fixing for aluminium alloy powder-coate) window frame with shutters open able type, with aluminium sections as per of “Jindal” section numbers for casement windows including aluminium alloy snap type beads, handles, aluminium barrel tower bolts and glazing clip, joint cleats, rubber gaskets etc., complete all as specified for series-B “ Jindal” section numbers for casement (a) Section for shutter 47.62x44.45x1.87 mm thick (b) Glazing clip weighing 0.259kg/mtr. (c) Windows shall be provided with 02 Nos. of tower bolt of size 125mm for single leaf shutter and 03 Nos. for double leaf. Handles shall be aluminium ‘D’ type handle of size 98mm and thickness 2.37mm weighing 0.875kg/mtr and 01 No on each openable leaf shall be provided. (Note : 1. The rates shall be inclusive of provision of and fixing of rubber packing/gasket. 2.Glass pane and wire gauge shall be measured and paid for separately.
S&F Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to frame work 12mm thick (as in shelves) built in cup boards / partitions and CB shutters etc including beading complete all as specified.
S & F 12 mm thick toughned glass plain / designing pattern as directed by GE including all necessory accessories for fitting door/window/partion
S&F aluminium alloy anodized sliding door bolt with hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 250mm complete all as specified and directed by Engr-in-charge.
S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.
S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F in repair staniless steel sink 1mm thick without drainage board for kitchen with plug , waste pipe , washers, including cantilever cast iron brackets , connecting union to waste pipe etc, overall size 495x420mm with bowl size 410x330x160mm complete all as specified and directed
Dismantling of timber scantlings unframed 40Sq Cm and over in section, in any position complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering incl ridge complete all as specified and directed.
S&F for 0.63 mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed.
M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, wind ties etc. conforming Fe 410 -W (GdeE- 250) qualityA complete all as specified and directed.
S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm(AZ-150) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Dismantling of single layer Mangalore pattern or similar tiles in roofing complete all as specified and as directed.
Dismantling of battens for tiles, shingles etc, of any size including tilting fillets spaced exc 15 cm complete all as specified and as directed.
M & L for Roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and as directed.
Preparation of old decorated surfacess of walls/Manglore tiles/AC Sheets and applying two coat of Weather coat paint white or tinted complete all as specified and directed.
M & L for preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.
Taking down steel water tubing and connections for 15mm bore of pipe including removing to store complete all as specified and as directed.
Taking down steel water tubing and connections for 20mm bore of pipe including removing to store complete all as specified and as directed.
Taking down steel water tubing and connections for 25mm bore of pipe including removing to store complete all as specified and as directed.
Supplying and laying in repair of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors for 16mm bore of pipe including Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor and all necessary fittings etc complete all as specified and directed.
Supplying and laying in repair of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors for 20mm bore of pipe including Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor and all necessary fittings etc complete all as specified and directed.
S&F in repair vitreous China squatting pan of pattern Orissa Pattern , size 580 x440 mm white with P or S trap , front or backinlet and integral foot rests any pattertn (excl flushing cistern and flush pipe) complete incl provn of lime concrete bedding connection to flush pipe , trap etc & making good complete all as specified and directed
S&F in repair vitreous china wash down water closet pan (Padestal pattern) white excluding fixing bolts, flushing cistern and flush pipe with and incl 'P' or 'S' trap and making good to floor to match with existing all as specified and directed
S&F in repairs vitreous China bowl urinal flat back of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern flush pipe and waste pipe) including connections to flushing pipe and out going pipes etc complete all as specified and directed
S&F vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets, PVC connections 450 mm long all as specified and directed by Engr-in-charge.
S&F in repair PVC low level flushing cistern of capacity 10 litres complete with siphon handle, lever, float valve and PVC bend including connecting to ITWC/ ETWC, PVC connection 450 mm long and fixing on wall bracket complete all as specified and directed by Engr-in-charge.
S&F in repair 15mm bore bib tap fancy type chromium plated cast copper alloy screwed down for iron pipes or for brass ferrule complete all as specified and directed by Engr-in-charge.
S&F in repair 15mm bore stop valve/ angle valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for union all as specified and directed by Engr-in-charge.
S&F in repai 15 mm concealed type stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated with long shank and cup complete all as specified and directed.
S&F in repair 15mm dia pillar tap cast copper alloy chromium plated capstan head screwed down high pressure with or without lettered hot or cold with long screw shank and fly nutt screw for iron pipe complete all as specified and directed
S&F in repairs grating doom 100mm dia CP (Min weight 25 grms) complete all as specified and directed
S&F in repair chromium plated overhead shower rose swivel type 125 mm with CP arms 300 mm long complete all as specified and directed
S&F inrepairs swan neck pillar taps, brass, with capston heads, fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed in repair, complete all as specified and directed
S & F of sinks with draining board made of stainless steel 1mm thick sheet for kitchen with plug washers, waste pipes, cast iron cantilever brackets, connecting union over all size 915mmx 460mm with bowl size 410x330x160mm, including bedding in cement mortar and connecting unions to pipe in repair complete all as directed.
S&F in repiar CP waste fittings brass chromium plated for sink 40mm dia with long screwed shanks and fly nuts , flange end bedded in red lead cement and other in fixed all as specified and directed.
S & F in repairs for Low density polyethylene (LDPE) 40mm pipes of pressure rating 6kgf/sq cm complete all as specified and directed.
S & F in repair 15 mm bore brass chromium plated Wall Mixer three in one including Provn of OH shower and hand shower fancy type screwed down to GI pipe with CP brass cup complete all as specified and directed
S & F in repair 15 mm bore brass chromium plated Wash Basin Mixer for hot & cold water with long shank and fly nut complete all as specified and directed.
S & F in repair 15 mm bore brass chromium plated Sink Mixer for hot & cold water with long shank and fly nut complete all as specified and directed .
S & F in repairs Towel rail 600 mm long and 20 mm dia brass chromium plated D type fixed with screws and wooden or plastic cleats complete all as specified and directed.
Supply & fixed in repairs PVC connection 15 mm size , 600mm long with PTMT adopter,check nuts and washer on both sides complete all as specified.
Taking down eaves gutters and rainwater pipes/PVC pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.
S&F, 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.
S&F, 75mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.
S&F, 110mm bore PVC (SWR) bend, any radius with access door complete all as specified and directed.
S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement of 75mm dia complete all as specified and directed.
S&F Plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.
Supply & Fixed in repairs Corner Glass Shelves including C type bracket fixed with steel screws (of Jaquar make or equivalent make as approved by GE) complete all as specified and directed.
S&F, in repair, PVC Bath Cabinet made from hard thermosetting material with mirror, white/ivory colour, 400 x 500mm size. Make : Prayag/ Jaquar or equivalent Make complete all as specified and directed.
S&F, in repair, jet spray with 1m PVC tube (stainless steel), chromium plated for vitreous china padestal pattern water closet complete all as specified and directed.
Supply & Fixed in repairs Two way bib cock complete as specified and as directed.
S&F, in repair, chromium plated, Toilet paper holder complete all as specified and directed. Make : Prayag/ Parryware/Jaquar or equivalent complete all as specified and directed.
S&F in repair for Towel Ring complete all as specified and directed.
S&F in repairs Towel Rail 600mm long stainless steel complete all as specified and as directed.
S&F in repair for Towel Rack 600mm long with lower hangers complete all as specified and directed.
S&F, in repair, chromium plated, Soap dish with holder complete all as specified and directed.
S&F in repairs Health faucet complete as specified and as directed.
M&L for Cutting holes in brick walls in exc half brick and nexc one brick in cement in mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 complete all as specified and directed.
M&l for Cutting chases, pinning in. through brick walls and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.
S & F in repair CP Urinal spreader of any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)
M&L for coloured rubber moulded cement concrete chequered tiles 300x300x25 mm thick with cement and coloured pigment, set and jointed in neat cement slurry and pointed in coloured cement to match as in floors over and including 15mm thick screed bed to floor finishes in cm 1:6 complete all as specified and directed.
Providing and filling epoxy putty into RCC crack after opening up RCC cracks in V– groove manner approximate 10 mm wide & 10mm deep using mechanical cutter, properly cleaning the same to remove loose dust dirt etc and filling the same using Nitocote VF –three component, solvent free, thixotropic, Epoxy resin based putty having 100% solid contents mixed density of 1.6 g/cc, compressive strength – 50 N/mm ², pot life of 40 minutes at 27 degree C, Drying time 8 hrs. recoatable time 24 hrs. And finishing in line and level with existing concrete surface etc. complete as per in charge GE. Make; - Thermax/ webac chemicals/ chemco system as approved by the GE Note : (i) Quoted rate shall be deemed to be inclusive of materials all labours, tools and plants, scaffolding and working upto height 6 mtr etc. complete as per specification and directed by GE . (ii) Adoption of necessary safety arrangements like safety belts ropes, helmets netting etc which are required for safety of worker working at height exceeding 3 mtr shall be mandatory and deemed to be inclusive in quoted rates
M & L for Granite (Black/Ruby Red ) work (table rubbed and polished) 20 mm thick in cooking platforms incl edge moulding & cutting holes for gas pipe through drill machine and jointed with grey cement slurry and pointed to match the shade of granite stone including grinding and polishing fixed over and including screed bed 15 mm thick in CM 1 : 6 etc all complete.
S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete all as specified and directed.
M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
M&L for laying DWCP 150 mm dia pipes in trenches Class SN-8 conforming to IS 16098 (Part -2) in 6 mtr length with coupler complete all as specified and directed by Engr-in-charge.
M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.
S&F in repair stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads complete all as specified and directed.
S& F 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden beading in square n. exc 0.5 Sqm in each pane complete all as specified and directed.
S & F 3 mm thick figured glass pin head type and glazing with oil putty/wooden beads in squares n exc 0.5 Sqm in each pane etc complete all as specified and directed.
Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) exc 1.5 Sqm not exc 4 sqm each and refixing in same openning complete all as specified and directed.
Taking down chowkats or frames n exc1.5 sqm each with shutter (without taking off shutters from the frames) complete all as specified and directed.
Taking down chowkats or frames exc 1.50sqm but n exc 4 sqm each with shutter (without taking off shutters from the frames) complete all as specified and directed.
Taking down shutter n exc 1.00 sqm each of any description complete all as specified and directed.
Taking down shutter exc 1.00 sqm but n exc 2 sq m each of any description complete all as specified and directed.
Taking down carefully any type point wiring (light, fan, socket bell or power) , complete with fitting such as switches ceiling roses,lamp holders sockets,regulators,call bell light fitting with PVC conduit surface /concealed or wooden pattens including sunken cast iron /pressed steel terminal boxes etc and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces all as specified and directed by Engineer in charge.
Taking down carefully ceiling fan/Exhaust Fan of any sweep and size and depositing to MES store and Hanging only ceiling fan (M.D.supply) and connecting up including provision of cable from ceiling rose or connector to fan
Taking down carefully Main switch and Distribution boards any make and size .
Taking down carefully Old unserviceable any type sub main wiring with wooden batten/PVC surface conduit of any size and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified and directed by Engineer in charge.
Material & Labour Sub main wiring with four single core PVC Insulated cable two run of size 4.0 Sqmm multi-strand copper conductor FRLS cable 1100 volts grade drawing into PVC conduit, medium grade not less than 25 mm dia with all conduit accessories and one run of 4.0 Sqmm multi-strand copper conductor FRLS cable as continuous earth wire including making good disturbed surface to match existing complete all as specified & directed. Note : - two run of 4.0 Sqmm & one run of 4.0 Sqmm cable shall be measured as one unit run.
M/L for Sub Main Wiring two single core PVC insulated cable of size 6.0 Sqmm multistranded copper conductor two run drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and one run of 6.0 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :-Two Nos of 6.0 Sqmm Wire and one No of 6.0 Sqmm Earth wire in One RM length Measured as one unit length.
M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed PVC conduit not less than 20mm (ISI marked) including all fitting and fixing accessories including sunk in cast iron/pressed steel terminal boxes duly painted with two coats of antirorrrosive paint outside and two coats of aluminium paint inside, 2.8mm thick hylam brand laminated white bakelite sheet cover for mounting of switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed by Engineer in charge.
(a) One light point controlled by one switch.
( b) One fan point/ex fan controlled by one switch.
(c) One socket point controlled by one switch on same board.
(d) One socket point controlled by one switch on Independent board.
Description all as per item No 134 here in before but with 1100 volts grade copper standard conductor cable of size 2.5 Sqmm with 1.5Sqmm solid copper conductor PVC for 3 pin switch socket outlet 15Amp independent board complete all as specified and directed by Engineer in charge .
M/L for fan regulator socket type AC 230 volts complete all as specified and directed by Engineer in charge.
M/L for Switch piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and directed by Engineer in charge.
M/L for Socket outlet 3 pin, 5 Amps and AC 230 volts flush type complete all as specified and directed by Engineer in charge
M/L for Switch socket combination 3 pin 5 and 15 Amps AC 230 volts flush type complete all as specified and directed by Engineer in charge
M/L for Ceiling rose surface bakelite 65 mm x50 mm three terminal AC 230 volts flush type complete all as specified and directed by Engineer in charge
Supply & Fixing Smart bright Batten Series, LED luminaire using LEDs 22 watt 110 LM/watt with diffuser which ensures uniform distribution and comfort batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminum housing, Energy efficient, Flicker free start Inbuilt driver unit Suitable for wall and ceiling mounting using brackets (supplied along with The Luminaire has been tested as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), report has established conformity of the product(s) to the requirements of the Standard/Specification
Supply and fixing Single phase ceiling fan 1200 mm permanent magnet brushless DC Motor 230 v 50 Hz single phase 26-30watt rated current 0.16 amp,pf 0.98 370/360 rpm air delivery 220m3 rated service value 629m3/min/watt no of blades three type of blade leaf 1.05 mm thick aluminium sheet remote control radio frequency 5 speed +off timer option speed regulation class of insulation two nos bearings including connecting wire complete with all as required and directed at site by eng in charge
S & F in repair Bulk head endura LED light fitting complete with10 watt LED and making necessary electric connection to ceiling rose with copper conductor of suiyable size & length complete all as specified & directed.
Supply & Fixing in repair sheet metal enclosure MCB DB double door [Acrylic], single pole and neutral, 240 volts, 8 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified & directed.
S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.
S & F for MCB Single pole rated capacity 5 to 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.
Supply & fix in replacement of LED Security Light Luminaire 35 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed.
S&F in replacement of sheet steel enclouser distribution boards, double door factory made VTPN 4 way 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulated copper jumpers of suitable size from the MCCB to the out going circuits one incoming MCCB 100 amps and MCB TP 63 A -02 Nos,MCB SP -04 Nos circuits comprising of 3 phase 4 wire of suitable rating all as specified and directed.
S & F MCB TPN 25 to 63 Amps, 240 Volts, minimum 10 KA, "C" series rupturing capacity and to be housed in DBs catered here in before complete all as specified and directed (Note :- Proper and suitable size cablecopper lugs to be fixed with MCBs are included in unit rate of each MCB of any rating)
S & F ON LOAD Change over switch 200 Amps 415 volts in sheet metal enclosure 4 pole including necessary provision for inserting cable ,complete all as specified and as directed.
Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing.
Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified & directed.
S&F LED light fitting square 59.5x59.5 CM Not less than 36 watt along with fixture Surface / Recessed /Pendent mounting LED luminaries with diffuser channel Luminaires ers, connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed by Engineer in charge.
Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mm sweep, enginerring plastic body complete with Metalic louvers including making holes of suitable size and making good the disturbed surface and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed.
Supply and fixing Single phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mm sweep, metallic body complete with Metalic louvers including making holes of suitable size and making good the disturbed surface and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed.
Supply and laying or fixing or passing in trenches/ on pole/ through pipes, 1100 volts grade XLPE insulated, screened PVC bedded, galvanised steel strip or wire armoured, heavy duty electric cable with stranded aluminium conductor of cross section area 50 sqmm, 3.5 core including jointing materials such as cable glands & lugs etc Complete all as directed.
Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for laying of pipe, cable etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil complete all as specified and directed.
Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25cm each complete all as specified and directed.
Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Supply,laying & fixing Double Wall Corrugated (DWC) pipes made of High Density Polyethylene (HDPE) with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps etc.. complete all as specified and as directed , outer dia 50 mm and inner dia 38 mm, complete all as specified and directed.
Supply & fix 50mm bore medium grade galvanised steel tubes with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified & directed.
Supply & fix 40mm bore medium grade galvanised steel tubes with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified & directed.
Supply & fix 20mm bore medium grade galvanised steel tubes with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified & directed.
Supply & fix 50mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
Supply & fix 40mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
Supply & fix 20mm bore gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
Supply and fix 500 ltrs capacity rotational moulded polyethylene water storage tank, ISI Marked, double layered (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed.
Schedule of credit of Rs. 59,795.00 to be deducted during AOC
M/S Modern builders
MAYOOKH CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .