REPAIR OF FURNITURE AT BD BARI MIL STN UNDER GE KALUCHAK

Amount

PEG TABLE : FD-26,277 & 384 The following repairs shall be carried out to Peg Table after removing old UNSV parts and replacing with new parts of well-seasoned BWR teak wood free from pits & knots as under all as directed by Engr-in-Charge:-

Top made out of 18mm thick pre-laminated MDF board exterior grade (size of 450mmx300mm) with matching PVC edging all around of color & texture as approved by GE. Make-ACTION TESA/CENTURY PLY & LAMINATES/GREENPLY/ARCHIDPLY

Leg (20mmx30mm of 380mm High)

Rail (20mm x40mm of 410mm long)

Rubber/PVC shoes (along with screw)

Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade matching the color of the top in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed.Make-BERGER/ASIAN PAINTS/NEROLAC/DULUX

TEAPOY : FD-232,278 & 382 The following repairs shall be carried out to teapoy after removing old UNSV parts and replacing with new parts of well-seasoned BWR teak wood free from pits & knots as under all as directed by Engr-in-Charge:-

Top made out of 18mm thick pre-laminated MDF board (sizze 450mmx600mm) exterior grade with matching PVC edging all around of color & texture as approved by GE. Make-ACTION TESA/CENTURY PLY & LAMINATES/GREENPLY/ARCHIDPLY

Leg (30mm x 60mm of 540mm high)

Rail (20mm x50mm of 480mm long)

Rubber/PVC shoes (along with screw)

Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade matching the color of the top in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed.Make-BERGER/ASIAN PAINTS/NEROLAC/DULUX

TABLE CENTRE : FD-29,235 The following repairs shall carried out to Table Centre after removing old UNSV parts and replacing with new parts of well-seasoned BWR teak wood free from pits & knots as under all as directed by Engr-in-Charge:-

Top made out of 18mm thick pre-laminated MDF board (size 450mm x 900mm)exterior grade with matching PVC edging all around of color & texture as approved by GE. Make-ACTION TESA/CENTURY PLY & LAMINATES/GREENPLY/ARCHIDPLY

Leg (30mmx60mm of 400 high)

Long Rail (20mmx50mm of 780mm long)

Short Rail (20mmx50mm of 410mm long)

Centre stiffener (20mmx50mm of 410 long)

Rubber/PVC shoes (along with screw)

Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade matching the color of the top in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed.Make-BERGER/ASIAN PAINTS/NEROLAC/DULUX

TABLE WRITING: FD-33(M), FD-275, FD-268 The following repairs shall carried out to Table Centre after removing old UNSV parts and replacing with new parts of well-seasoned BWR teak wood free from pits & knots as under all as directed by Engr-in-Charge:-

Top made out of 18mm thick pre-laminated MDF board (size 1145mmx600mm)exterior grade with matching PVC edging all around of color & texture as approved by GE. Make-ACTION TESA/CENTURY PLY & LAMINATES/GREENPLY/ARCHIDPLY

Leg (25mmx55mm of 760mm long)

Long Rail (25mm x50mm of 760mm of long)

Short Rail (25mmx50mm of 600mm long)

Centre stiffener (25mmx50mm of 1095mm of long)

Rubber/PVC shoes (along with screw)

Drawer (as per drg)

Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade matching the color of the top in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed.Make-BERGER/ASIAN PAINTS/NEROLAC/DULUX

TABLE 3X3:- FD-291/FD-88(M) The following repairs shall carried out to Table Centre after removing old UNSV parts and replacing with new parts of well-seasoned BWR teak wood free from pits & knots as under all as directed by Engr-in-Charge:-

Top made out of 18mm thick pre-laminated MDF board (size 900mmx900mm)exterior grade with matching PVC edging all around of color & texture as approved by GE. Make-ACTION TESA/CENTURY PLY & LAMINATES/GREENPLY/ARCHIDPLY

Leg (35mm x 60mm of 760mm long)

Long Rail ( 20mmx50mm of 830mm long)

Short Rail (20mmx50mm of 780mm long)

Rubber/PVC shoes (along with screw)

Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade matching the color of the top in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed.Make-BERGER/ASIAN PAINTS/NEROLAC/DULUX

TABLE 3X2 W/O DWR: FD-284 The following repairs shall carried out to Table Centre after removing old UNSV parts and replacing with new parts of well-seasoned BWR teak wood free from pits & knots as under all as directed by Engr-in-Charge:-

Top made out of 18mm thick pre-laminated MDF board (size 900mmx600mm) exterior grade with matching PVC edging all around of color & texture as approved by GE. Make-ACTION TESA/CENTURY PLY & LAMINATES/GREENPLY/ARCHIDPLY

Leg (30mmx60mm of 760mm long)

Long Rail (20mmx60mm of 780mm long)

Short Rail (20mmx600mm of 540mm long)

Centre stiffener (20mmx50mm of 540 long)

Rubber/PVC shoes (along with screw)

Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade matching the color of the top in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed.Make-BERGER/ASIAN PAINTS/NEROLAC/DULUX

TABLE 3X2 WITH DWR: FD-283 The following repairs shall carried out to Table Centre after removing old UNSV parts and replacing with new parts of well-seasoned BWR teak wood free from pits & knots as under all as directed by Engr-in-Charge:-

Top made out of 18mm thick pre-laminated MDF board (size 900mmx600mm) exterior grade with matching PVC edging all around of color & texture as approved by GE. Make-ACTION TESA/CENTURY PLY & LAMINATES/GREENPLY/ARCHIDPLY

Leg (30mmx60mm of 760mm long)

Long Rail (20mmx60mm of 780mm long)

Short Rail (20mmx600mm of 540mm long)

Centre stiffener (20mmx50mm of 540 long)

Drawer (as per drg)

Rubber/PVC shoes (along with screw)

Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade matching the color of the top in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed.Make-BERGER/ASIAN PAINTS/NEROLAC/DULUX

TABLE DINNING FOR 06 PERSONS:FD-239,273 & FD/MAP-II/03 Repair to table dining of 06 persons including dismantling/removal of all broken parts and replacing with new parts of well-seasoned BWR teak wood free from pits & knots as under all as directed by engr-in-charge:-

Top made out of 18mm thick pre-laminated MDF board (size 1500mmx900mm) exterior grade with matching PVC edging all around of color & texture as approved by GE. Make-ACTION TESA/CENTURY PLY & LAMINATES/GREENPLY/ARCHIDPLY

Leg (90mmx45mm of 750mm long)

Long Rail (45mmx90mm of 1320mm long)

Short Rail (45mmx90mm of 810mm long)

Teak wood corner size 75mm x 75mm to table between legs and rails fixed with screw.

Stiffener (90mmx25mm of 810mm long)

Rubber/PVC shoes (along with screw)

Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade matching the color of the top in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed.Make-BERGER/ASIAN PAINTS/NEROLAC/DULUX

TABLE DINNING FOR 08 PERSONS: FD-239,273 & FD/MAP-II/03 Repair to table dining of 08 persons including dismantling/removal of all broken parts and replacing with new parts of well-seasoned teak wood as under all as directed by Engr-in-Charge:-

Top made out of 18mm thick pre-laminated MDF board (size 1800mmx900mm) exterior grade with matching PVC edging all around of color & texture as approved by GE. Make-ACTION TESA/CENTURY PLY & LAMINATES/GREENPLY/ARCHIDPLY

Leg (90mmx45mm of 750mm long)

Long Rail (45mmx90mm of 1320mm long)

Short Rail (45mmx90mm of 810mm long)

Teak wood corner size 75mm x 75mm to table between legs and rails fixed with screw.

Stiffener (90mmx25mm of 810mm long)

Rubber/PVC shoes (along with screw)

Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade matching the color of the top in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed.Make-BERGER/ASIAN PAINTS/NEROLAC/DULUX

TABLE DINNING 4 PERSON: FD/MAP-II/03 Repair to table dining including dismantling/removal of all broken parts and replacing with new parts of well-seasoned teak wood as under all as directed by Engr-in-Charge:-

Top made out of 18mm thick pre-laminated MDF board (size 1200mmx900mm) exterior grade with matching PVC edging all around of color & texture as approved by GE. Make-ACTION TESA/CENTURY PLY & LAMINATES/GREENPLY/ARCHIDPLY

Leg (90mmx45mm of 750mm long)

Rail (45mmx90mm of 810mm long)

Teak wood corner size 75mm x 75mm to table between legs and rails fixed with screw.

Rubber/PVC shoes (along with screw)

Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade matching the color of the top in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed.Make-BERGER/ASIAN PAINTS/NEROLAC/DULUX

BED PLY TOP : FD- 264 Supply & fixing of following existing old broken wooden components of various furniture items or similar items carefully without disturbing the adjoining parts and providing new components of 1st grade BWR Teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact complete all as specified, shown on drg or as directed by Engr-in-Charge:

Headrest with Legs (25mmx100mm teak wood plank as per drg)

Footrest with Legs (25mmx100mm teak wood plank as per drg)

Centre Stiffener (30mmx20mm of 910mm long)

Long Rail (50mmx100mm of 2000mm long)

Short Rail (50mmx100mm of 910mm long)

Top made 12mm thick plywood commercial type BWR (1974mmx824mm) comforming to IS:303.

Scrapping off the entire existing polish of the wooden members with an electric grinder, filling putty to the bore holes/pits/cracks & chippings, scratching the surface smooth, polishing in shade as approved with PU (polyurethane) polish or MELAMINE polish following complete steps for TRADE PATTERN MIRROR LIKE SMOOTH & GLOSSY FINISH complete all as specified and as directed by Engr-in-Charge.

SIDE BOARD :FD-26,371 & 372 Repairing the item including dismantling/removal of all broken parts and replacing with new parts of 18mm thick prelaminated MDF board exterior grade in shade & texture as approved by Engr-in-Charge as under:-

Side (18mm thick Prelaminated MDF board of 445mmx635mm)

Back (18mm thick Prelaminated MDF board of 445mmx1220mm)

Shelves (12mm thick Prelaminated MDF Board 883mmx426mm)

Drawer (as per drg)

Door (as per Drg)

Top (18mm thick Prelainated MDF board size of 1220mmx445mm)

Bottom Frame (75mmx75mm teak wood frame as per drg)

Knobs as per approved sample.

Scrapping off the entire existing polish of the wooden members with an electric grinder, filling putty to the bore holes/pits/cracks & chippings, scratching the surface smooth, polishing in shade as approved with PU (polyurethane) polish or MELAMINE polish following complete steps for TRADE PATTERN MIRROR LIKE SMOOTH & GLOSSY FINISH complete all as specified and as directed by Engr-in-Charge.

CHAIR DINING JCO/OR : FD/MAP/03 & FD/MAP-II/05 Supply & fixing of following existing old broken wooden components of various furniture items or similar items carefully without disturbing the adjoining parts and new components of first class BWR teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,placing every part in-tact.

Back rest (45mmx15mm of 405mm long as per Drg)

Leg stiffener (20mmx25mm 440mm long)

Front legs (30mmx55mm of 460mm Long)

Rear Legs(30mmx55mm of 460mm Long)

Rails (30mmx60mm of 430mm long)

Rubber/PVC shoes (along with screw)

PVC seat 4mm thick with holes & screwed with frame as per drg.

Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed.Make-BERGER/ASIAN PAINTS/NEROLAC/DULUX

CHAIR DINING FD-279 :- Supply & fixing of following existing old broken wooden components of various furniture items or similar items carefully without disturbing the adjoining parts and new components of first class BWR teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,placing every part in-tact.

Back rest (45mmx15mm of 405mm long as per Drg)

Leg stiffener (20mmx25mm 440mm long)

Front legs (30mmx55mm of 460mm Long)

Rear Legs(30mmx55mm of 460mm Long)

Rails (30mmx60mm of 430mm long)

Rubber/PVC shoes (along with screw)

Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed.Make-BERGER/ASIAN PAINTS/NEROLAC/DULUX

CHAIR EASY: FD-17 & 229:- Supply & fixing of following existing old broken wooden components of various furniture items or similar items carefully without disturbing the adjoining parts and new components of first class BWR teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,placing every part in-tact.

Rear legs (leg out of 55mmx25mm of 300mm long as per drg)

Front Legs (leg out of 55mmx25mm of 355mm long as per drg)

Rail seat (50mmx25mm of 510mm long)

Rail (Back) (50mmx25mm of 480mm long)

Arms (65mmx25mm of 610mm long)

Rubber/PVC shoes (along with screw)

Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed.Make-BERGER/ASIAN PAINTS/NEROLAC/DULUX

CHAIR WRITING:-FD-280,261,20 & 148 Supply & fixing of following existing old broken wooden components of various furniture items or similar items carefully without disturbing the adjoining parts and new components of first class BWR teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,placing every part in-tact.

Back rest stiffeners (50mmx25mm of 470mm long)

Leg Stiffener (25mmx20mm of 530mm long)

Front Legs (55mmx30mm of 660mm long)

Rear Legs (55mmx30mm of 890mm long as per drg)

Rails (30mmx65mm of 535mm long)

Arms (60mmx25mm of 470mm long)

Rubber/PVC shoes (along with screw)

Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed.Make-BERGER/ASIAN PAINTS/NEROLAC/DULUX

CHAIR DINING LONG BACK & CHAIR DINING OFFICERS :-FD-357 & FD/E6/MAP/10 Supply & fixing of following existing old broken wooden components of various furniture items or similar items carefully without disturbing the adjoining parts and new components of first class BWR teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing,placing every part in-tact.

Back rest as per drg

Cusioned seat (75mm thick 32 density form with fabric on seat with 12mm ply & as per drg)

Leg stiffener as per drg

Front legs as per drg

Rear Legs as per drg

Rails as per drg

Rubber/PVC shoes (along with screw)

Scratching the entire wooden pallets ,filling putty to the bore holes making surface smooth by scratching it with an electric grinder & shall be MELAMINE polished in natural TEAK shade in TRADE PATTERN HIGH GLOSS FINISH complete all as specified and as directed.Make-BERGER/ASIAN PAINTS/NEROLAC/DULUX

SOFA SINGLE PIECE : FD-373, 1113 & 281 Supply & fixing of following existing old broken wooden components of various furniture items or similar items carefully without disturbing the adjoining parts and providing new components of 1st grade BWR Teak/sheesham/sagwan wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact complete all as specified, shown on drg or as directed by Engr-in-Charge.

Cushion 100 mm thick 40 density covered with tapestry cloth not less than Rs 550 per mtr secured with a concealed high quality zipper for easy removal all as approved, specified & as directed by Engr-in-Charge.

Arms (75mmx35mm of 725mm long)

Legs (75mmx35mm of 300mm high)

Batten as per drg

Bearer as per drg

Rubber/PVC shoes (along with screw)

Scrapping off the entire existing polish of the wooden members with an electric grinder, filling putty to the bore holes/pits/cracks & chippings, scratching the surface smooth, polishing in shade as approved with PU (polyurethane) polish or MELAMINE polish following complete steps for TRADE PATTERN MIRROR LIKE SMOOTH & GLOSSY FINISH complete all as specified and as directed by Engr-in-Charge.

SOFA SET 4/5 SEATER : FD-373, 1113 & 281 Supply & fixing of following existing old broken wooden components of various furniture items or similar items carefully without disturbing the adjoining parts and providing new components of 1st grade BWR Teak/sheesham/sagwan wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact complete all as specified, shown on drg or as directed by Engr-in-Charge.

Cushion 100 mm thick 40 density covered with tapestry cloth not less than Rs 550 per mtr secured with a concealed high quality zipper for easy removal all as approved, specified & as directed by Engr-in-Charge.

Arms (75mmx35mm of 725mm long)

Legs (75mmx35mm of 300mm high)

Batten as per drg

Bearer as per drg

Rubber/PVC shoes (along with screw)

Scrapping off the entire existing polish of the wooden members with an electric grinder, filling putty to the bore holes/pits/cracks & chippings, scratching the surface smooth, polishing in shade as approved with PU (polyurethane) polish or MELAMINE polish following complete steps for TRADE PATTERN MIRROR LIKE SMOOTH & GLOSSY FINISH complete all as specified and as directed by Engr-in-Charge.

ALMIRAH MESS UTENSIL-FD-93 Repairing the item including dismantling/removal of all broken parts and replacing with new parts of 18mm thick prelaminated MDF board exterior grade in shade & texture as approved by Engr-in-Charge as under:-

Back (1670mmx1065mm 12mm th plwood)

Door as per drg

Shelves (18mm thick MDF board 405mmx380mm)

Top as per drg

Bottom Frame as per drg

Knobs as per approved sample.

Scrapping off the entire existing polish of the wooden members with an electric grinder, filling putty to the bore holes/pits/cracks & chippings, scratching the surface smooth, polishing in shade as approved with PU (polyurethane) polish or MELAMINE polish following complete steps for TRADE PATTERN MIRROR LIKE SMOOTH & GLOSSY FINISH complete all as specified and as directed by Engr-in-Charge.

TABLE DRESSING GENTS : FD-230 & 379 Repairing the item including dismantling/removal of all broken parts and replacing with new parts of 18mm thick prelaminated MDF board exterior grade in shade & texture as approved by Engr-in-Charge as under:-

Complete box including drawers made up of 12mm thick prelmainated MDF Board

Looking glass with 6mm thick commercial plywood back & TW frame duly polished

Knobs as per approved sample.

'I' hook for hanging table made out of 3mm thick FI.

HAT STAND WITH MIRROR: FD-362 Repairing the item including dismantling/removal of all broken parts and replacing with new parts of 18mm thick prelaminated/ MDF board exterior grade in shade & texture as approved by Engr-in-Charge as under:-

S&F of Looking mirror 300mmx440mmx5.5mm TH as per drg.

Copper oxidised Pegs

'I' hook for hanging table made out of 3mm thick FI.

Scrapping off the entire existing polish of the wooden members with an electric grinder, filling putty to the bore holes/pits/cracks & chippings, scratching the surface smooth, polishing in shade as approved with PU (polyurethane) polish or MELAMINE polish following complete steps for TRADE PATTERN MIRROR LIKE SMOOTH & GLOSSY FINISH complete all as specified and as directed by Engr-in-Charge.

RECANNING TO VARIOUS TYPES OF WOODEN CHAIRS/STOOLS Removing the existing unserviceable cane plastic from the chair and recaning the following chairs in true Godrej pattern with plastic cane 2mm to 2.5mm wide, white/yellow color (Make of Cane : Shah/Premier). The caning shall be done only after repairing & polishing as stated above complete all as specified & directed by Engr-in-Charge.:-

Chair Dining:- FD-279,262,228,16(M),1105

Chair Writing:-FD-20(M) ,261,280,250,1107

Chair Easy:-FD-229,17,358

Stool Dressing CB:-FD-27,252,282,

TRESTLE STORE ROOM WOODEN FD-

Scrapping off the entire existing polish of the wooden members with an electric grinder, filling putty to the bore holes/pits/cracks & chippings, scratching the surface smooth, polishing in shade as approved with PU (polyurethane) polish or MELAMINE polish following complete steps for TRADE PATTERN MIRROR LIKE SMOOTH & GLOSSY FINISH complete all as specified and as directed by Engr-in-Charge.

Rack record 6'x2'x6.' FD-

Scrapping off the entire existing polish of the wooden members with an electric grinder, filling putty to the bore holes/pits/cracks & chippings, scratching the surface smooth, polishing in shade as approved with PU (polyurethane) polish or MELAMINE polish following complete steps for TRADE PATTERN MIRROR LIKE SMOOTH & GLOSSY FINISH complete all as specified and as directed by Engr-in-Charge.

TABLE BED SIDE (FD-276/FD-248) Repairing the item including dismantling/removal of all broken parts and replacing with new parts as approved by Engr-in-Charge as under:-

Removing of old unsv Side from Table bed side. Supply with 18mm thick MDF/Particle board with both side laminated as approved colour by GE/Engr-in-charge and fixing it properly as shown on drawing. The edge of the board shall be binding with 6mm thick teakwood beading

Removing of old unsv back from Table bed side. Supply with 06mm thick BWR plywood board and fixing it properly as shown on drawing. The back of the Bed side board shall be polished with matching of the Board.

TABLE DRESSING LADIES WITH MIRROR:(FD/MAP-II/07 &FD-378) Repairing the item including dismantling/removal of all broken parts and replacing with new parts as approved by Engr-in-Charge as under:-

Removing of old unsv Side from Table dressing ladies. Supply with 18mm thick MDF/Particle board with both side laminated as approved colour by GE/Engr-in-charge & matching with the parts clour and fixing it properly as shown on drawing. The edge of the board shall be binding with 6mm thick teakwood beaten.

Drawer as shown on drawing

Fancy knobs as approved by GE/Engr-in-charge

Stool Cushion 75 mm thick 40 density covered with tapestry clothsecured with a concealed high quality zipper for easy removal all as approved, specified & as directed by Engr-in-Charge.

Castor wheels 50mm dia

Supply & Fixing of 5.5mm looking mirror with frame as shown on drg.

Dressing mirror gents FD/E6/MAP/16 Repairing the item including dismantling/removal of all broken parts and replacing with new parts as approved by Engr-in-Charge as under:-

Removing of old unsv Side from dressing mirror gents. Supply with 18mm thick MDF/Particle board with both side laminated as approved colour by GE/Engr-in-charge & matching with the parts colour and fixing it properly as shown on drawing. The edge of the board shall be binding with 6mm thick teakwood batten.

Removing of old unsv ply from back of dressing mirror gents and Supply & fixing with 12mm thick phenol bonded ply

Removing of old unsv & S & F Teakwood legs as shown on drg.

Removing of broken unsv & S & F Movable glass shelves supported on runner/glass holder as shown on drawing

Removing of broken unsv & S & F 5.5mm looking mirror with frame as shown on drg.

Chair Tubular steel with Arms : FD-75(M)

Repair to chair tubular steel with arms by dismantling old seat and back frame & replacing with new seat and back frame made out of seasoned teak wood duly canned with cane plastic 2mm wide in Godrej pattern fixed on the frame with 4 Each steel screws with washer of appropriate size as per sample kept in furniture yard.Unsv wooden arm rests shall be replaced with the new ones. Flat iron, 15x3mm in two Each duly welded beneath the seat shall be provided. Frame shall be painted with synthetic enamel paint OG colour and wooden surfaces shall be painted in black color matching the existing after properly smoothening the surfaces with sand paper all as specified and directed by Engineer-in-Charge.

Chair Steel tubular without Arms :FD-75(M)

Repair to chair tubular steel without arms by dismantling old seat and back frame & replacing new seat and back frame made out of seasoned teak wood duly canned with cane plastic 2mm wide in Godrej pattern fixed on the frame with 4 Each steel screws with washer of appropriate size as per sample kept in furniture yard .Unsv wooden arm rests shall be replaced with the new ones., flat iron 15x3mm in two Each duly welded beneath the seat shall be provided. Tubular frame shall be painted with synthetic enameled paint OG colour and wooden surfaces shall be painted in black color matching the existing after properly smoothening the surface with sand paper all as specified and directed by Engineer-in-Charge.

Table dining OR's STEEL : FD-165

Repair to table dining OR's including replacement of UNSV existing top with 18/19mm thick block board with 22 gauge aluminium sheet (1975x750) on top of Board to be properly fix. Required welding work on the steel frame structure as per Engr-in-charge direction and the Steel frame of the table shall be painted with synthetic enameled paint BLACK colour after properly smoothening the surface with sand paper complete all as directed by the Engineer-in-Charge.

ALMIRAH LARGE STEEL ,FD-1031,FD/E6/MAP/18

Removing unsv & S & F shelves with appropriate nuts bolts all as specified and directed by Engineer-in-Charge.

Removing unsv & S & F locks(Make-HARRISON/GODREJ/LINK), 6 levers Godrej pattern of steel with duplicate key & hole cover.The keys & lock shall have embedded similar numbers for identification.

Removing unsv & S & F steel anodized handles 4” grip as per sample.

Removing unsv & S & F locking assembly with cover duly painted.

M & L for denting & painting Almirah both internally and externally with synthetic enameled paint of BLACK colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.Make of Paint:-BERGER/ASIAN PAINTS/NEROLAC

ALMIRAH MEDIUM STEEL : FD-1032, FD-114

S & F shelves replacing the old unsv with appropriate nuts bolts all as specified and directed by Engineer-in-Charge.

S & F locks(Make-HARRISON/GODREJ/LINK), 6 levers Godrej pattern of steel with duplicate key & hole cover.The keys & lock shall have embedded similar numbers for identification.

Removing unsv & S & F steel anodized handles 4” grip as per sample.

S & F locking assembly with cover duly painted.

M & L for denting & painting the Almirah both internally and externally with synthetic enameled paint of silver/ grey colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.Make of Paint:-BERGER/ASIAN PAINTS/NEROLAC

Book Case Steel Glazed

Removing unsv & S & F shelves & shutters with appropriate nuts bolts all as specified and directed by Engineer-in-Charge.

Removing unsv & S & F locks(Make-HARRISON/GODREJ/LINK),with duplicate key.

Removing unsv & S & F steel anodized handles as per sample.

Removing unsv & S & F glass of the shutters and smoothening the movement thereof.

M & L for denting & painting Almirah both internally and externally with synthetic enameled paint of GREY/OG colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.Make of Paint:-BERGER/ASIAN PAINTS/NEROLAC

LOCKER BEDSIDE STEEL :FD-257

M & L for Denting & painting of locker with synthetic enamel paint of BLACK/BROWN colour after preperation of surface by cleaning & smoothening with electric grinder & applying putty/primer where necessary complete all as specified/shown on drg & directed by Engr-in-Charge.Make of Paint:-BERGER/ASIAN PAINTS.

Removing and replacing unsv & S & F hasp & staples 75mm long as per drg.

Removing unsv & S & F MS steel CP handles 100mm long as per drg.

S & F CP steel conduit 19/20mm dia hanging rod with brackets16 guage as per drg.

Replacing unsv & S & F shelves all as per drg.

CHAIR COMPUTER,CHAIR REVOLVING EXECUTIVE(HIGH/LOW BACK),CHAIR REVOLVING WITH & W/O ARMS:- GODREJ,FD/E6/MAP/01,Royalz

Removing unsv & S & F seat & back of 12 mm thick hot pressed plywood upholstered with fabric & moulded polyurethane foam. The back foam shall be designed with contour lumber support with PVC lipping all around. The cushions shall be of 40 density, 75mm thick for seat & 50 mm thick for back alongwith the fabric of approved quality & color.All as directed by Engr-in-Charge.

Removing unsv & S & F castor wheels as per the approved sample

Removing unsv & S & F handrest matching the previous all in shape,size,material & quality.

S & F pedestal assembly all matching the shape,size & quality of the previous.

Removing unsv & M & L for servicing synchro tilting mechanism.

M & L for servicing the gas lift mechanism & making the seat adjustment functional.All as directed by Engr-in-Charge

Table office offr steel: FD-1003 & 84

Repair to table office offr steel by replacing top of pre-lminated MDF board 18mm thick exterior grade as approved with both sides lamination with matching PVC edging all around. Drawers & cupboard shall be repaired for smooth functioning. All steel sufaces of table shall be painted with two coats of synthetic enamel paint of existing shade with spray gun after properly smoothening the surface with sand paper & applying primer where necessary. Hard rubber shoes shall be provided for legs complete all as directed by Engr-in-Charge.

Table Office clk steel: FD-1004 & 84

Repair to table office clerk steel by replacing top of pre-lminated MDF board 18mm thick exterior grade as approved with both sides lamination with PVC edging all around. All steel surfaces of table shall be painted with two coats of synthetic enamel paint of existing shade with spray gun after properly smoothening the surface with sand paper & applying primer where necessary. Hard rubber shoes shall be provided for legs complete all as directed by Engr-in-Charge.

CHAIR VERANDAH FD-333,256:-,

Removing unsv & M & L for recanning the chair with plastic cane 3.5mm to 4mm wide, 0.4 mm thick half round, white colour, (MAT Pattern),(GAREWARE/MPI/SHAH/PREMIER) complete all as specified & directed.Canning shall be done only after painting.

M & L for painting the frame of the chairs by one coat of synthetic enamel white of approved quality over a coat of primer after scrapping off the existing worn out paint with an electric grinder complete all as specified & directed..(SHALIMAR/ASIAN PAINTS/BERGER)

Removing unsv & Supply and Fixing PVC shoes .

CHARPOY IP W/HARD TOP: FD/MAP-II/01

Removing old UNSV plywood top and S & F of new top made out of 12 mm thick plywood board commercial grade conforming to IS:303 of Make-CENTURY PLY /GREENPLY/DUROPLY/ARCHIDPLY

Removing old UNSV Rubber/PVC shoes and S & F of new Rubber/PVC shoes

Scratching the entire steel frame ,filling putty & scratching it with an electric grinder to smoothen the uneven surface & spray painting it in black color complete all as specified and as directed.Make-BERGER/ASIAN PAINTS/NEROLAC/DULUX

TABLE 3'X2' WITH DRAWER STEEL: FD-1008

Removing unsv & S & F top having pre-lminated MDF board(CENTURYPLY/ACTION TESA/GREENPLY) 18mm thick exterior grade in shade as approved by GE both side lamination with halfround teakwood edging matching the color of the top.

Removing unsv & S & F new drawers & cabinet all as per drawing.

M & L for painting all over the steel structure with synthetic enameled paint of BLACK colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.Make of Paint:-BERGER/ASIAN PAINTS/NEROLAC.

Removing unsv & S & F hard rubber shoes to legs

TABLE 3'X2' WITHOUT DRAWER STEEL: FD-1007

S & F top of pre-lminated MDF board(CENTURYPLY/ACTION TESA/GREENPLY) 18mm thick exterior grade in shade as approved, both side lamination with HALF ROUND teakwood edging matching the color of the top.

M & L for painting all over the steel structure with synthetic enameled paint of BLACK colour with spray gun after properly smoothening the surface with the help of an electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge.Make of Paint:-BERGER/ASIAN PAINTS/NEROLAC.

S & F hard rubber shoes to legs.

CHAIR WRITING, CHAIR VISITORS :- FD/E6/MAP/12, GODREJ, ROYAL Supplying & fixing the following parts in replacement of the old existing unserviceable parts of the chair as approved, shown on drawing & as directed by Engr-in-Charge :-

Seat & back of 12 mm thick hot pressed plywood upholstered with fabric & moulded polyurethane foam. The back foam shall be designed with contour lumber support with PVC lipping all around. The cushions shall be of 40 density, 75mm thick for seat & 50 mm thick for back alongwith the fabric of approved quality & color complete all as directed by Engr-in-Charge.

Handrest to match with existing all in shape, size, material & quality.

Rubber stoppers.

TABLE 900X900mm: FD-1009 Supplying & fixing the following parts in replacement of the old existing unserviceable parts of the Table Dining ORs as approved, shown on drawing & as directed by Engr-in-Charge :-

Top of PRELAMINATED MDF board 18/19mm thick with matching PVC edging in shade as approved covering both the faces.

Material & labour for painting all over the steel structure with synthetic enameled paint of BLACK/BROWN colour with spray gun after properly smoothening the surface with the help of an electric grinder, applying putty on dents and providing a coat of primer complete all as specified & directed by Engineer-in-Charge.

Removing old UNSV Rubber/PVC shoes and S & F of new Rubber/PVC shoes

TEAPOY VERANDHA/TEAPOY VERANDHA MAP STEEL : FD/E6/MAP/17 Supplying & fixing the following parts in replacement of the old existing unserviceable parts of the Table Dining ORs as approved, shown on drawing & as directed by Engr-in-Charge :-

Top of PRELAMINATED MDF board 18/19mm thick with matching PVC edging in shade as approved covering both the faces.

Material & labour for painting all over the steel structure with synthetic enameled paint of BLACK/WHITE colour with spray gun after properly smoothening the surface with the help of an electric grinder, applying putty on dents and providing a coat of primer complete all as specified & directed by Engineer-in-Charge.

Hard rubber shoes for legs

BED HARD MAP: FD/E6/MAP/08(R)

Removing old UNSV plywood top and S & F of new top made out of 12 mm thick plywood board commercial grade conforming to IS:303 of Make-CENTURY PLY /GREENPLY/DUROPLY/ARCHIDPLY

Removing old UNSV Rubber/PVC shoes and S & F of new Rubber/PVC shoes

Scratching the entire steel frame ,filling putty & scratching it with an electric grinder to smoothen the uneven surface & spray painting it in black color complete all as specified and as directed.Make-BERGER/ASIAN PAINTS/NEROLAC/DULUX

TV TROLLEY : FD/E6/MAP/04 Repairing the item including dismantling/removal of all broken parts and replacing with new parts of 18mm thick prelaminated MDF board exterior grade in shade & texture as approved by Engr-in-Charge as under:-

Shelf

Bottom sheet

Glass shutter with magnetic catcher

Castor wheels

CHAIR SCHOOL WITH HAND BOARD- FD/E6/MAP/05

Removing of old UNSV blowplastic one piece seat & back and S & F of new blowplastic one piece seat & back

Removing of old UNSV hand rest board and S & F of new hand rest board made out of 18mm thick prelaminated MDF board with PVC edging

Removing old UNSV Rubber/PVC shoes and S & F of new Rubber/PVC shoes

Painting to the steel structure in BLACK color after removing the old wornout paint all as specified by Engr-in-Charge,

TABLE COMPUTER: FD/E6/MAP/03

Supply & Fixing of UNSV existing top of table computer with 18mm thick prelaminated MDF/Particle board commercial type both sides laminated duly covered with PVC edging in color approved by the GE/Engr-in-charge. Steel frame of the table shall be painted with synthetic enameled paint BLACK colour after properly smoothening the surface with sand paper complete all as directed by the Engineer-in-Charge. Make: ACTION TESA/CENTURYPROWUD/GREENPLY

Supply & Fixing of UNSV existing bottom of table computer with 18mm thick prelaminated MDF/Particle board commercial type both sides laminated duly covered with PVC edging in color approved by the GE/Engr-in-charge. Steel frame of the table shall be painted with synthetic enameled paint BLACK colour after properly smoothening the surface with sand paper complete all as directed by the Engineer-in-Charge. Make: ACTION TESA/CENTURYPROWUD/GREENPLY

Removing of Keyboard holder and Supply & Fixing of keyboard holder with 18mm thick MDF/Particle board matching with the top of table.

Removing of old unsv telescopic channels and Supply & Fixing of high quality telescopic channels to the mouse pad board/ Key board holder & drawer of the tables.

Removing old UNSV Rubber/PVC shoes and S & F of new Rubber/PVC shoes bush stud type.

Rack shoe steel FD/E6/MAP/02(R)

Removing of old unsv main frame of 25mm dia MS pipe 18 gauge and Supply & Fixing of main frame of 25mm dia MS pipe 18 gauge

Removing of old unsv jali framework of 19mm dia MS pipe 18 gauge welded to legs and Supply & Fixing of jali framework of 19mm dia MS pipe 18 gauge welded to legs

Removing of old unsv 3mm dia MS rods of 18 gauge and Supply & Fixing of 3mm dia MS rods of 18 gauge

Removing of old unsv 20m dia MS pipe of 18 gauge welded to legs and Supply & Fixing of 20m dia MS pipe of 18 gauge welded to legs

M & L for welding at various broken points complete all as specified & directed by Engr-in-charge.

Table bedside steel FD/E6/MAP/15®

Removing of old unsv top/sides from Table bed side. Supply with 18mm thick MDF/Particle board with both side laminated with PVC edging as approved colour by GE/Engr-in-charge and fixing it properly as shown on drawing.

Removing of old unsv ply from back of Table bed side. Supply with 06mm thick BWR ply and fixing it properly as shown on drawing.

Removing unsv drawers and S & F with 18mm thick MDF/Particle board with both side laminated with PVC edging as per approved colour by GE/Engr-in-charge and fixing it properly as shown on drawing.

Removing unsv CP handles and S & F new CP handles all as directed by Engr-in-charge.

Removing of old unsv telescopic channels and Supply & Fixing with high quality telescopic channels to the drawer of the table

Removing unsv hardwood stopper and S & F new hardwood stopper all as directed by Engr-in-charge.

Removing of old unsv 18mm thick MS square pipe of 18 gauge and Supply & Fixing with 18mm thick MS square pipe of 18 gauge to the framework of the table

M & L for welding at various broken points complete all as specified & directed by Engr-in-charge.

Painting to the MS pipe with BLACK powder coating after removing the old wornout paint all as specified by Engr-in-Charge,

TRESTLE STORE ROOM STEEL FD-86/ FD-1043

M&L for required welding work on the steel frame structure as per Engr-in-charge direction and the Steel frame of the TRESTLE STORE ROOM shall be painted with synthetic enameled paint with two coats of Black colour after properly smoothening the surface with help of electric grinder complete all as directed by the Engineer-in-Charge.

RACK ADJUSTABLE STEEL 3 TIER FD-1039

M&L for required welding work on the steel frame structure as per Engr-in-charge direction and the Steel frame of the RACK ADJUSTABLE STEEL 3 TIER shall be painted with synthetic enameled paint with two coats of OG/Black colour after properly smoothening the surface with help of electric grinder complete all as directed by the Engineer-in-Charge.

RACK ADJUSTABLE STEEL 6 TIER FD-1038

M&L for required welding work on the steel frame structure as per Engr-in-charge direction and the Steel frame of the RACK ADJUSTABLE STEEL 6 TIER shall be painted with synthetic enameled paint with two coats of OG/Black colour after properly smoothening the surface with help of electric grinder complete all as directed by the Engineer-in-Charge.

Sarbat Construction Co (BID ID -3080317)

SB TRADING CO (BID ID -3086872)

PACHNANDA BUILDERS (BID ID -3087692)

M.B TUBE AND ALLIED IND. Contr (BID ID -3085370)

VEE KAY IND (BID ID -3084308)

M/S Sukhmani Construction Co. (BID ID -3086521)