Certain repair to B/R items and other misc items at R Center, Transit Camp, FOD , HQ 133 WE, CE 31 ZONE and other AOR of AGE B/R-III, BB Cantt. Srinagar.

Amount

Taking down chowkhats or frames without taking off shutters exc 1.5 Sqm but n exc 4 sqm each, complete all as specified and directed.

Description all as per item No 1 above but not exc 1.5 sqm each , complete all as specified and directed.

Taking down shutters of any description not exc 1 Sqm each, complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but not exc 2 sqm each, complete all as specified and directed.

S&F Second class HW plain solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F 2nd class hard wood 35mm thick glazed and skelton shutters open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred breds for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.20(a) , complete all as specified and directed.

S&F 35mm thick plain framed paneled shutters, any No. of panels with panels of plywood 9mm thick for two or more panel construction and 12mm for single panel construction, BWR conforming to IS fixed to timber frame of 2nd class hard wood, all style & rail are as per clause 8.24(a) of SSR Part – I, complete all as specified and directed.

S&F, 3mm sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sqm in each plane, complete all as specified and directed.

S&F galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperature .18mm, complete all as specified and directed.

S&F 150 mm extruded aluminium alloy handles ,fabricated type, complete all as specified and directed.

S&F 100 mm extruded aluminium alloy handles ,fabricated type, complete all as specified and directed.

S & F Aluminium anodised barrel tower bolt of extruded section 200 mm long, complete all as specified and directed.

S&F Aluminium anodized, barrel tower bolt 150mm long of extruded section, complete all as specified and directed.

S&F mild steel butt hinges 100mm, medium wt, complete all as specified and directed.

S&F in 300mm mild steel ordinary rat tail rod pattern springs incl roller and roller plate complete

S & F 300mm mild steel sliding door bolts, clip type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading.and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm wood grain colour PVC sheet reiforced with MS square tube, suppling & fixing in opening as per specification & drawing.

M&L two coats of synthetic enamel on wood (ordinary tint) over one coat of pink primer over 10cm width or girth incl preparation of new surface, complete all as specified and directed.

S & F in repair, 20mm Harrison rails, mild steel, chromium plated with brakcet, knobs, rings @ 10cm c/c etc complete all as specified.

Dismantling wall and ceiling boards (fibre, pulp, insulation,etc) or insulation bards/slabs /bankets, any thickness, including cover plate, complete all as specified and directed.

S&F False ceiling with pre-coated standard GI angle, Tee and grid suspended with 4 mm dia GI wire at 600 mm c/c , angle of size 25 x 25 x 0.7 mm fixed around, main Tee and cross Tee of the section 38 x 25x 0.7 mm with soffits clips, holding and level clips, Gypsum board of 12 mm thick with white paper layer on face side of size 600 x 600 mm or any size as directed and applying two coats of acrylic emulsion over a coat of primer, including hangers 4 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed.

S&F in repair, hollow PVC Wall Lining consisting of 5mm thick any colour/ texture PVC sheet inclusive of solvent cement and fixing at site on PVC frame, including 5mm thick PVC sheet fillet of width 20mm 'L' & 'U' for wall paneling inclusive of fixing on to wall to make PVC Frame as per specifications and drawing complete.all as specified and directed.

Dismantling of plain or corrugated steel sheeting ,any gauge, thickness including roof covering etc complete all as specified and directed

S&F Galvanized corrugated 0.63mm thick mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in roofs walls etc of class 8, complete all as specified and directed.

S&F Plain, galvanised, 0.63mm thick mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and ountersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed .

S&F Glazed ceramic coloured tiles 450mm x300mm x 6 to 7 mm thick,sharp edged (joint free), in vertical surfaces such as walls, skirting etc , set to match over 10 mm thick rendering in cement mortar 1:3, complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n.exc 15 cm thick below or above GL un-reinforced, complete all as specified and directed.

S&F Coloured vitrifired ceramic tiles (Light shade) 10mm thick (square) polished , light shade, area of each tiles exc 0.42 sq.m but n.exc 1.00 Sq.m (min. size 1200 mm x 600mm) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement over and incl 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

S&F Non skid ceramic coloured tiles 400x400X7mm thick set and jointed in neat cemnt slurry and pointed in cloured cement as in floor over and incl screed bed or bedding layer of cement mortar 1:4, 15mm thick complete all as specified

S&F Coloured vitrifired ceramic tiles (Dark shade) 10mm thick (square) polished , light shade, area of each tiles exc 0.42 sq.m but n.exc 1.00 Sq.m (min. size 1200 mm x 600mm) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement incl 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B1, (using 20mm stone aggregate) as in flooring / levelling course, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc., complete all as specified and directed.

M&L, 20mm thick granite stone slabs over 15 mm thick screed layer in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of stone incl rubbing & polishing, complete all as specified and directed.

M & L for Chequered cement concrete tiles 20cm X 20cm X 25mm thick, with gray cement and no pigments set, jointed in neat cement slurry in floors including 15mm thick screed bed CM 1:4, complete all as specified and directed.

M&L 60mm thick Machine pressed factory made Precast cement concrete interlocking paver blocks with using grey cement and no pigment of Grade M-40 of any size & shape confirming to IS 15658-2006 as directed such as I-shape, Uni, Octagonal, Three-X, Dumble, Zig Zag etc., laid over & including 30 mm thick sand cushion, complete all as specified & as directed.

M&L Factory made Precast cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in road side kerb stone of size & shape as directed ,including necessary use and waste of form work if required and also including setting in cement mortar 1:4 complete all as specified & as directed.

M &L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and , laid over & including 15 mm thick screed bed in cement mortar 1:3 polishing completeall as specified & as directed.

M&L for Kota stone slab 12-15mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing over 10 mm thick rendering in cement mortar 1:3 complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing all as specified.

Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for such as existing roof padding incl plaster etc. on roof , complete all as specified and as directed .

M & L for 12 mm thick rendering in CM 1:3 on faces of sunken portion with nerru finishes including mixing Liquid water proofing compund in the proportion as mentioned in manufacturer's instructions complete all as specified and as directed

M&L P:C:C 1:7:12 as in mass concrete using 40 mm graded brick agg as in sunken portion.

M&L for Providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (not exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints through out the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, removing all type of vegetation (like peeple tree etc) scrubbing down with water complete, all as specified and as directed .

M&L for 15 mm thick rendering on fair faces of brick /concrete on wall including facia chhajja etc.surfaces in cement mortar 1:6 and finished even and smooth without using extra cement , complete all as specified and as directed .

M&L for 15 mm thick rendering in two layer (10mm + 5mm) on fair faces of brick /concrete on wall including facia chhajja etc.surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing Liquid water proofing compund in the proportion as mentioned in manufacturer's instructions complete all as specified and as directed by Engr-in-Charge. Note : Water proofing compund to be measured and paid for separately as supply only.

M&L for 5 mm thick rendering on fair faces of brick /concrete on ceiling including facia chhajja etc.surfaces in cement mortar 1:3 and finished even and smooth without using extra cement , complete all as specified and as directed .

Supply only liquid water proofing compound, complete all as specified & directed.

M & L for applying two coat of cement base paint on new surfaces of walls including preparation of surfaces complete all as specified and directed .

M & L for preparationof new surface of walls and applying two coats oil bound distemper over a coat of primer, smmoth finish , complete all as specified and directed .

Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed .

M&L for walling of random rubble, uncoursed, brought upto courses, well bonded, bedded and solidaly hearted, built in CM (1:6) etc complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints with maximum depression on face from straight edge held against the dressed surface n exc 40mm of granite or trap stone random rubble walling, uncorsed or brought upto courses complete all as specified and directed.

M&L for raised pointing to random rubble masonry built in cement mortar (1:4) complete all as specified and directed.

M&L Brick work with sub class 'B' Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 all as specified and directed .

S&F, in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified.

S & F, in repair 15mm bore sink mixer, for mixing hot or cold water, brass, CP, fancy type, with capstan head handles, screwed down high pressure, screwed for iron pipe or for brass ferrule of 15mm dia complete all as specified and directed.

S & F, in repair Vitreous china water closet, 'Squat pattern, including lime concrete bedding, size 580 x 440 mm white with integral foot rests excluding flushing cistern and flush pipe but including connection to trap, anti syphonage pipe etc. complete, complete all as specified and as directed .

S & F, in repair Vitreous China wash down water closet pan and seat cover (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including P or S trap and including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, including connection to drain pipe (or out going pipe) and to flushing pipe, antisyphonage pipe, etc. including cast iron 'P' or 'S' trap for 100mm bore of pipe, complete all as specified and as directed.

S & F, in repair 10 ltr capacity PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with twin flush provision, complete all as specified and as directed .

S & F, in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S & F, in repair Vitreous china wash basin white flat back size 580x450 mm excluding taps waste chain and plug and porcelain stopper but including brackets including 15 mm bore centre hole mixer, complete all as spd & directed.

S & F, in repair Angle valve / Stop valve15mm dia cast copper alloy chromium plated fancy type without shank and cup concealed type srewed for iron pipe or for union and fixed in repair all as spd & directed

S & F, in repair PVC flexible connections PTMT 600mm long 15mm dia with flange nuts & washers complete all as specified and directed.

S & F, in repair CP brass soap dish, heavy duty, fixed with chromium plated brass screws , complete all as specified and as directed.

S & F, in repair CP Towel Ring 200mm dia complete all as specified and as directed .

S&F, in repair CP steel grating 75/100mm dia , complete all as specified and directed.

S & f, in repair 20mm dia brass chromium plated tubular towel rails,D type,60 cm long between flanges complete all as specified and as directed.

Taking up or down 15/ 20mm bore dia, steel tubing & connections incl cleaning for refining or removal to store, complete all as specified and as directed

S&F steel water tubing galvanised 15mm bore, med grade fixed to walls and ceiling or in floor , complete all as specified and as directed

Refixing 15 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed

S&F steel water tubing galvanised 20mm bore, medium grade with all fittings fixed to wall and ceiling or in floor complete all as specified.

Refixing 20 mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed

S & F in repair 15mm dia Bib taps cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe fixed in repair all as spd & directed

S&F, in repair brass chromium plated shower rose 125mm size fitted to steel pipe or union.

Rotational moulded polyethylene water storage tank , three layers, (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 500 litres each including all accessories (i.e GI nipples and Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of bore 20mm (Minimum weight 210 gram) etc), incl dismantling existing unserviceable water tank, complete all as specified and as directed .

Description all as per Srl item No 83 above but 1000 litres capacity .

S&F in repair 3-layer PP-R polyproxylene random copolymer) 20mm outer Dia concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

Description all as per Srl item No 85 above but 25 mm outer Dia .

S&F in repair Ball bearing for rolling shutters, complete all as specified and directed.

M&L for aluminium anodised powder coated sections of approved and required size for door / windows frames or chowkats / partitions / shutters, sliding channels / tracks etc including jointing cleats, MS nut & bolts or steel screws, dash fasteners, rowel plug for fixing of screws in wall or floor etc complete all as specified and as directed.

S&F Anodised aluminium powder coating of any colour (Thickness or powder coating not less than 50 micron) door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.complete all as specified and as directed.

S&F Anodised aluminium powder coating of any colour (Thickness or powder coating not less than 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified and as directed.

S&F 5 mm thick tinted glass fixed with necessary rubber gasket and aluminium beading weight not less than 100gm per RM with aluminium frame complete all as specified and as directed.

S&F brass 2 lever Mortice lock, vertical type, size 100 mm complete all as specified and as directed.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS 1868 with minimum anodic coating o grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as per site requirement and as directed.

S&F in repairs 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination including teak wood lipping 6mm thick alround the shutter as in cup board fixed with screws to timber frame work complete all as specified and directed.

S&F 100 mm size Aluminium anodised hasp and staple, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

M&L for Lagging to pipes internal dia 15mm used in internal water supply or plumbing all round with, 25min thick bonded mineralwool preformed ‘SNAP ON ’pipe sections of density 144Kg/cum conforming to IS9842 including chicken mesh wire netting 25 gauge, 20mm mesh allowed & with 0.01mm aluminium foil complete all as specified and directed

Description all as per serial item No. 96.00 described here-in-before butt internal dia 20mm

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes including necessary fittings, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Description all as per serial item No. 99.00 described here-in-before but 75mm bore dia pipe

S&F Khatamband pattern false ceiling, design as approved by GE with ornamental wood work made out of 1st class soft wood (Deodar) including hangers/fillets/cornices and 12mm thick BWR plywood and finally finished with french polish (two or more coats) complete all as specified and as directed.

S&F in repairs for wooden laminated flooring in strips of size 120 cm long and 20 cm wide and 6-8 mm thick, fixed with PVC sheet and cushion including fillets/cornices, laid over 12mm thick BWR plywood complete all as per manufracturer's instruction all as specified and directed.

M/S Tajamul Ah Buchh

Alishan Builders

M/S Gh Qadir

M/S MUSHTAQ AHMAD BHAT

M/S KABIR CHOUDHARY