CONSTRUCTION OF MDCC BANK KIKKERI BRANCH BUILDING

CONSTRUCTION OF MDCC BANK KIKKERI BRANCH BUILDING

Clearing and grubbing road land including uprooting rank

vegetation, grass, bushes, shrubs, saplings and trees girth up to

300 mm, removal of stumps of trees cut earlier and disposal of

unserviceable ...

Earth work in surface excavation by mechanical means for lowering & leveling

the ground for all works other than foundation in all kinds of soils & upto depth

not exceeding 300mm as per drawing and te...

Earth work excavation by manual means for drains,

canals, waste weir draft, approach channels, key

trench, foundation of Buildings & Bridges and such

similar works in all kinds of soils , as per drawi...

Providing and injecting chemical emulsion for Pre-constructional

Anti-Termite Treatment, creating continuous chemical barrier under

and around the column pits, walls, trenches, basement excavation, to...

Providing and injecting chemical emulsion for Pre-constructional

Anti-Termite Treatment, creating continuous chemical barrier under

and around the column pits, walls, trenches, basement excavation, to...

Providing and laying in position Cement Concrete

for levelling course for all works in foundation. The

granite/trap/basalt crushed graded coarse aggregates

and fine aggregates as per relevant IS Codes...

Providing and laying in position Reinforced cement concrete for all

Foundation works. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes machine

Providing and laying in position Reinforced cement concrete for all

Foundation works. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes machine

Providing and laying in position Reinforced cement concrete for all

Foundation works. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes machine

Providing and laying in position Reinforced cement concrete for all

Foundation works. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes machine

Providing and laying in position Reinforced cement concrete for all

Foundation works. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes machine

Providing and laying in position Reinforced cement concrete for all

Foundation works. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes machine

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Providing Coursed rubble masonry (first sort) with hard stone in foundation

and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)(2023-22 SR Page No.9(v2), Item No.5.2)

MIX 1:2:4 (M15) Using 20 mm and down size

graded crushed coarse aggregates(2021-22 SR Page No.73(v1), Item No.2.4.1)

Providing Flush / Ruled/ Struck or weathered pointing Pointing on brick

work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand)

after raking joints to depth nicely lining, including cos...

Filling available excavated earth (excluding rock) in trenches, plinth,

sides of foundations and other similar works etc. in layers not exceeding

20cm in depth, consolidating each deposited layer by r...

Providing and constructing load bearing wall with Solid Concrete blocks

of size 400x200x200mm having block density more than 1800kg/m3

and minimum compressive strength of 4.00 N/mm2 conforming to IS

Providing and constructing load bearing wall with Solid Concrete blocks

of size 400x150x200mm having block density more than 1800kg/m3

and minimum compressive strength of 4.00 N/mm2 conforming to IS

Providing 12 mm cement plaster finished with a floating coat of neat

cement of mix :1:3 (1 cement: 3 fine sand) to brick masonry including

rounding off corners wherever required smooth rendering, prov...

Providing 15 mm cement plaster on rough side of single or half brick

wall finished with a floating coat of neat cement of mix 1:3 (1 cement:

3 fine sand) including rounding off corners wherever requir...

Providing 18 mm cement plaster in two coats under layer 12 mm thick

cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a

top layer 6 mm thick cement plaster with cement mortar 1:3 (1...

Providing 15 mm cement plaster on the rough side of single or half brick

wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners

wherever required smooth rendering, providing and remov...

Providing and applying white cement based putty of average thickness

1 mm, of approved brand and manufacturer, over the plastered

wall surface to prepare the surface even and smooth complete as per

Wall painting with acrylic emulsion paint of approved brand and

manufacture to give an even shade :Two coats on new work after

thoroughly brooming the surface to remove all dirt, dust, mortar drops

Finishing walls with Acrylic Smooth exterior paint of required shade :New

work (Two coat applied @ 1.67L/10 m² over and including priming coat of

exterior primer applied @ 2.20 kg/10 m²) with paint ...

Providing and laying Vitrified tiles with thickness 9-10 mm in different

sizes with water absorption less than 0.08 % and conforming to I.S. 15622,

of approved make, in all colours & shade, over 12 mm...

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm

thick on 10mm thick cement plaster 1:3 and jointed with white cement

slurry over existing rough plaster surface using glazed ti...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm

thick on 10mm thick cement plaster 1:3 and jointed with white cement

slurry over existing rough plaster surface using glazed t...

Providing and fixing double glazed hermetically sealed glazing in aluminium

windows, ventilators and partition etc. with 6 mm thick clear float

glass both side, having 12 mm air gap, including providi...

Providing and fixing M.S. grills of required pattern in frames of windows

etc. with M.S. flats, square or round bars etc. including priming coat with

approved steel primer all complete. Fixed to steel...

Painting with synthetic enamel paint of approved brand and

manufacture to give an even shade :Two coats on new work after

thoroughly brooming the surface to remove all dirt, dust, mortar drops

Providing Honne wood frames of doors, windows, clerestory windows,

ventilators and other frames, wrought, framed or assembled including

making plaster groves (excluding cost of cement concrete and sid...

Providing and fixing flush door shutter made out of solid core block board

type, well seasoned , chemicaly treated hard wood battens and internal

frame with minimum 45 mm wide wooden frame alround doo...

Providing and fixing in position collapsible steel shutters with vertical

channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size,

with top and bottom rail of T-iron 40x40x6 mm, with 40 m...

Providing and fixing on wall face unplasticised Rigid PVC rain water

pipes conforming to IS : 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for thermal exp...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing, polishing

and making curvature (wherever required) and fitt...

Providing and fixing Steel work welded in built up sections/ framed

work, including cutting, hoisting, fixing in position and applying a priming

coat of approved steel primer using structural steel et...

Providing and laying water proofing treatment to the Roof with PU based

single component elastomeric pure polyurethane based coating on New

terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

Plumbing and Sanitation Work

Electrical Work