Provn of Drainage system in surrounding of bldg No P 29 and P 30 at 984 AD Regt wksp and Provn of tiling and pathway in 11xJCO Bldg No P 158/02 to 04 P-159/01 to P 159/04 and P 160/01 to P 160/04 of 326 Lt AD Regt (Comp) under GE (Army) Dhar Road

Amount

Excavating in trenches, n. exc 1.5 m wide and n. exc 1.5 m in depth and exceeding 10 sqm on plan for foundation etc or for shaft, wells cesspits, manholes etc and getting out in any type of soil.

Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth, for foundation, etc. or for shaft, wells, cespits manholes, piers holes, etc. nexc 10sqm on plan and getting out in Soft/dis-integrated rock.

Returning and filling in, including, spreading, levelling, watering and well raming in layers n.exc 25cm in hard/Dense soil.

Removing excavated material (Soil) n.exc. 50m and sepositing where directed at a level n.exc. 1.5m above the starting point

M&L Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete, complete all as specified and directed.

M&L Brickwork with subclass ‘B’ bricks, (old size) straight or curved on plan exc 6m mean radius, buit in in CM (1:6) complete all as specified and directed.

M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping/benching including weathering throting ans necessary formwork complete all as specified.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 and finished even and smooth without using extra cement complete all as specified.

M&L cement concrete 1:2:4 Type - B1 ( using 20mm graded stone aggragate) as in surface channel & drain all as specified and directed

M&L Extra for forming fair finished drains or channels exc 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M&L for precast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, shelves and similar articles with plain faces, set in CM 1:4, including necessary form work moulds etc all as specified. (Reinforcement shall be measured and paid for separately).

M&L mild steel TMT steel bars in reinforcement 10mm dia and over cut to length bent to shape required including cranking binding spirally, hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store yard and rubbish off the premises as directed.

M & L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, incl Brushing neat cement slurry with 3.0kg of cement per sq. metreetc all as specified and directed.

M&L for 18 to 20 mm thick Kota stone slab flooring (Machine cut) of any size laid over and incl 20mm thick bedding layer in cement mortar 1:6 for laying floor finishes over neat cement slurry @ 3Kg/sqm over sub base , jointed and pointed in grey cement mixed with pigment to match the shade of slab including rubbing and polishing to achieve mirror finish complete as in flooring all as specified.

M&L for Kota stone slab 15-16mm thick in riser of steps, skirting, dado and pillar laid over 10 mm thick 1:3 cement mortar jointed and pointed in grey cement mixed with pigment to match the shade of slab including rubbing and polishing to achieve mirror finish complete as in flooring all as specified.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm (size 300x300), in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6

M&L for Glazed ceramic coloured tiles 300x450x 7mm thick on vertical surfaces of wall set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick rendering in CM (1:4) backing of wall tiles such as dado/skirting in vertical surface complete all as specified and as specified.

S&F light shade Vetrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:4) complete all as specified.

S&F light shade Vetrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical portion/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick in cement mortar 1:4 other than fair faces of brick work, finished even and fair, incl taking down cement plaster on brick or stone walls etc incl raking out joints, hacking for key and scrubbing down with water etc

M&L 25mm thick Cement conrete type B0, 1:2:4 using 12.5 m graded stone aggregates as in sub-base, sub-floors, floors etc complete all as specified and directed..

S&F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, with flush pipe and pvc connection of 450mm long fixed complete all as specified.

S&F PVC valveless, syphonic action type, flushing cistern (10 Ltrs), low level, white, with inlet, ball valve, float and handle including brackets

S&F in repairs plastic water closet seat cover white or any colour closed padestrial pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and fixed complete all as specified Make Cera,Parryware or equivalent

S&F Wash basins, Vitreous China (flat back or angle back type) size 550x400mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply pipe but including brackets and 32mm dia PVC Waste pipe 800mm long, waste coupling etc complete all as specified.

S&F wall mixture with provision for overhead shower with 115mm long bend pipe on upper side,connecting legs & wallflanges.complete all as specified. Make:- ESS/Prayag/Hindware

S&F Brass CP centre hole mixer without pop up waste system 15mm bore for mixing hot & cold water screwed down for iron pipe for Wash Hand Basin complete all as specified and directed. Make:- ESS/Prayag/Hindware

S&F CP Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms)

S&F Soap dish, vitreous China white, approximate size 160x 160x90mm

S&F 15mm bore bib taps long body fancy type cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule fixed complete all as specified and directed. Make:- ESS/Prayag/Hindware

S&F 15mm bore dia CP stop valve/angle valves cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete.

S&F PVC connections 15mm size with PTMT nuts of length 450mm

M&L 15mm bore steel tubes "medium grade" galvanised with all fitting and fixed complete in walls ceilig or laid in floors.

All as per item No 34 above but 20mm bore

S&F fancy type brass chromium plated shower rose 125mm size with CP swiveled type arm fixed to steel pipe or union complete.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S&F 75mm dia PVC (SWR) bends

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors

All as per item No above but 110mm bore

S&F PVC(SWR) bends suitable for 110 mm external dia complete all as specified

Taking up or down GI tubing 15 mm bore pipe including cleaning for re-fixing or removal to store.

All as per item No 30 above but 20mm bore

M&L for rendering 15mm thick in cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smoothe without using extra cement incl taking down existing complete all as specified.

M&L for apply two coat of cement base paint over a coat of alkali resistant primer on new plaster surface of walls including preparation and match with existing surfaces.

M&L for 50 mm thick in Plain cement concrete type C2 ( 1:3:6)( using 20 mm graded aggregate ) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and smooth at top without using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight all as directed at site.

Surface excavation n. exc 30 cm deep and averaging 15cm and getting out hard/dense soil complete all as specified and directed.

M&L Hardcore of guage not exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick watered and rammed to true surface with broken stone complete all as specified and directed.

M&L for 100 mm thick cement concrete type D-2, 1:4:8 (40 mm graded stone agg) as in levelling course for laying floor finishes.

M&L for 60mm thick factory made machine pressed precast concrete inter locking paver block any shape and size conforming to ISI 15658-2006 , with grey cement and pigment approved by GE & laying over and including 25mm thick sand cushion incl watter and ramming (Compacted) and joints filled with sand complete all as specified and directed.

Providing precast cement concrete type B1, 1:2:4 (20mm graded aggregate) , kneelers, apex stones, kerb stones, with plain fair faces, including chamfers, weathering's, throating etc. and setting in mortar 1:4 incl requreired exavation and removal of surplus material complete all as specified and as directed.

M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping/benching including weathering throting ans necessary formwork complete all as specified.

M/S SHARMA TRADERS

MAHADEV ENTERPRISES

PARAS RAM ASGOTRA AND SONS

DAVINDER SINGH