Repair and renovation of existing Chain-link Fencing along National Highway and other link roads along the boundary of Ramnagar Wildlife Sanctuary

Amount

Demolishing cement concrete manually by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge. 1:3:6 or ridser mix (i/c equivalent design mix).

Supplying at site Angle iron posts & struts of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia etc, complete. (Angle Iron 50x50x6mm, Angle Iron 40x40x6mm and Flat Iron 40x6mm)

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings upto girth of 30 cms measured at aheight of 1 m above ground level and removal of rubbish upto a distance of 50m outside the periphery of area cleared.

Excavation work in excavation by manual means for foundations, drains, pipes, cables etc. (not exceeding 1.5m in width) and for shafts wells cesspits and the like not exceeding 10 sqm on plan, depth upto 15 M including the disposal of excavated earth upto 1 M from the cutting edge, disposed earth to be levelled and neatly dressed in all kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and slattering - All work up to plinth level: 1:5:10 (1 Cement: 5 coarse sand 10 graded stone aggregate 40 nm nominal size).

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. All work upto plinth level. 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 40mm nominal size) Crushed.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:3:6 (1 cement 3 coarse sand: 6 graded stone aggregate 20mm nominal size).

Centering and shuttering inchiding strutting, propping etc and removal of form for: foundations, footings, bases of columns, etc. for mass concrete.

Supplying at site Angle iron posts & struts of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia etc. complete. (Angle Iron 50x50x6mm, Angle Iron 40x40x6mm and Flat Iron 40x6mm)

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50mm including strengthening with 2mm dia wire or nuts, bolts and washers as required complete as per direction of Engineer-in-charge. Made of G.I. wire of dia 4mm.

Painting with synthetic enamel point of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade on new steel works. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

12mm thick cement plaster in 1:4 mix (1 cement: 4 corse sand).

Engage Blacksmith Two numbers for Eight Days for erecting chainlink fencing and angles.

Engage Labour Two for Eight Days.

MUSHTAQ ALI

SHASHI KUMAR ATRI