Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.4 LAccepted-AOC 1291 1ST FLOOR SECTOR 26 PANCHKULA HARYANA 134116 | PANCHKULA | HARYANA | 134116 | L1 | Accepted-AOC The lowest bidder | |
| 2 | L2₹33.0 L+₹1.4 L (4.40%)Rejected-AOC 546 14 JUTOGH CANTT SHIMLA HP 171008 | SHIMLA | HIMACHAL PRADESH | 171008 | L2 | Rejected-AOC Other than the lowest bidder | |
| 3 | L3₹33.8 L+₹2.2 L (7.07%)Rejected-AOC | L3 | Rejected-AOC Other than the lowest bidder | |
| 4 | L4₹35.3 L+₹3.7 L (11.6%)Rejected-AOC 140 ANAND NIWAS SET NO 2 ENGINE GHAR SANJAULI SHIMLA 171 006 | SHIMLA | HIMACHAL PRADESH | 171006 | L4 | Rejected-AOC Other than the lowest bidder | |
| 5 | L5₹39.3 L+₹7.7 L (24.4%)Rejected-AOC 154 155 SUBATHU DISTT SOLAN 173206 | SOLAN | SOLAN | HIMACHAL PRADESH | 173206 | L5 | Rejected-AOC Other than the lowest bidder |
Tender Value
₹50.0 L
EMD Value
₹99,900
Closing Date
21 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) JUTOGH
GE (I) JUTOGH, JUTOGH CANTT SHIMLA (HP) - 171008
COMPREHENSIVE MISC B/R WORKS AT JUTOGH, CHAIL, SHIMLA, KUFRI AND SANJAULI UNDER GE (I) JUTOGH
2023_MES_582595_1
GE/JUT-67 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
JUTOGH
CLASS D CATEGORY a (i)
7 documents required · 7 mandatory
₹500
GE (I) JUTOGH
₹99,900
Yes
30 Mar 2023
23 Feb 2023
23 Mar 2023
23 Feb 2023
21 Mar 2023
7 Mar 2023
Amount
Demolition of cement concrete (unreinforced) in any position and any description not otherwise specifically provided for, complete all as specified and directed.
M&L for 100mm thick, PCC 1:2:4, type B-2, using 40mm graded crushed stone aggregate as in path hard standing etc finished even and smooth without using extra cement, complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in plinth protection, finished concrete surfaces even and smooth without using extra cement, complete all as specified and directed.
M&L for PCC 1:2:4, type B-1, using 20 mm graded crushed stone aggregate as in surface channels and drains etc including necessary form work and finishing cement concrete surface even and smooth with using extra cement, complete all as specified and directed.
M&L for 75mm thick PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in subbase of flooring complete all as specified and directed.
M&L for sand filling under floor or under paver block including spreading levelling in layers n exc 25 cm thick, well ramming, watering and consolidation complete all as specified and directed.
M&L for machine pressed precast concrete interlocking paver rubber moulded pre polished with lacquer finish pre lacquer finish pre coloured glossy finish, block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade with grey cement and pigment set over sand cushioning complete all as specified and directed.
M & L for chequered cement concrete tiles rubber moulded pre polished with lacquar finish pre coloured glossy finish 30cmx30cmx22-25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors laid over and incl 20mm thick screed bed in CM 1:6 complete all as specified and directed.
Taking down cement or lime plaster of any discreption on brick or concrete walls including raking out joints, hacking for key scrubing down with water complete all as specified and directed.
Dismantling of floor hearth or wall tiling incl cement mortar bedding (but not backing) removing rubbish of the premises complete all as specified and directed.
M&L for glazed ceramic coloured tiles joint free in vertical surfaces (brick/ stone/ concrete surface) of size 350x250x7mm/ 450x300-350x7mm, 300x200x7mm thick set and jointed in neat cement to match fixed over and incl 15mm thick rendering in cement mortar 1:4, complete all as specified and directed.
Demolition of brick or stone masonary built in cement mortar incl all quoins arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete block, at any height complete all as specified and directed.
M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate, as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed
M&L for brick work with old size kiln burnt sub class 'B' bricks, straight or curved on plan exc 6 m in mean radius, built in CM 1:6 complete all as specified and directed.
M&L for brick work with subclass 'B' bricks, straight or curved on plan any radius, built in cement mortar 1:4, in half brick thick wall complete all as specified and directed.
M&L for rendering 15 mm thick on other than fair surfaces of brickwork or concrete surface in cement mortar 1:4 finished even and smooth (without using extra cement), complete all as specified and directed.
M&L for preparation of new or previously untreated plastered surfaces of walls and applying two coats of cement base paint on walls, complete all as specified and directed.
Demolition of cement concrete is reinforced (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided complete all as specified and directed.
M&L for precast reinforced cement concrete 1:2:4, type B-1, (using 20mm graded crushed stone aggregate) as in landings, cover slabs ( for manholes etc.), chullah hoods, chajjas, water troughs, shelves and similar articles with plain faces including necessary form work, set in cement mortar 1:6, complete all as specified and directed. Note: Reinforcement and handle shall be measured and paid separately.
S&F TMT bar 10mm dia & over, cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
S&F TMT bar 6mm to 8mm dia cut to length bent to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed.
Dismantling posts & struts; (wood, steel or R.C.C) any section, including taking out embedded portion & making good distributed ground complete all as specified and directed. (Post embeded in concrete, brick work masonary etc)
Dismantling fencing wire mesh, any type complete all as specified and directed.
Excavation in post holes (or similar holes) each n. exc. 0.5 cum in hard/dense soil and getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm watering and removing surplus soil to a distance n. exc 50 m and making good surface complete all as specified and directed.
M&L for PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in foundation filling and mass concrete, complete all as specified and directed.
S&F mild steel as in Joist channel, angle, MS pipe or tee sections for post and struts fixed independently, without conneting plates etc structural steel conforming to Fe-410w, Gde- E-250 quality 'B', complete all as specified and directed.
M&L for mild steel round bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (Annealed) not less than 0.90 mm dia or securing with clips quality conforming to Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde -E-165). complete all as specified and directed.
S&F mild steel screw bolts (machine made) dia of neck exceeding 5 but not exc 10 mm with hexagonal or square head at one end and screwed the other end or screwed both end, each screw end to be fitted with washers and one hexagonal or square nuts, n.exc 5cm long complete all as specified and directed.
Supply only Chain link MS galvanisd fencing of 3.8mm dia wire, mesh size 50x50mm/ 100x100mm made into mattresses laped wired laid in position complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh size and type to any type of standard rails, straining bolts etc, including provision of binding wire, any size or type weight exc 4Kg per Sqm as approved by Engineer-in-Charge, complete all as specified and directed.
S&F galvanised, 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.
M&L for preparation of new steel surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of new steel surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M/S kuldeep kumar khullar
M/S Shiv Kumar
PRITPAL SINGH
M/s Parmod Kumar
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .