Mo. Babhanaiya purab me Block Chauraha se Mo Babhanaiya Paschim me Ajay soni ke makan tak R.C.C. covered nala nirman ka karya.

Earth work in surface excavation not exceeding 30 cm.in depth but exceeding 1.5 m in width etc. complete as per SOR 2.1.2. For diviersion of water

Dismantling brick work or stone work in lime or cement mortar and including stacking of materials etc..complete As per SOR 2.1.2

Cartage of Ballast ,Kankar,Coal, Grid or sand etc. including loading and unloading etc..complete, Up to 5 km. As per SOR (231a)5 Item No 2

P/L cement concrete 1:5:10 cement coarse sand &40 mm graded stone aggregate etc. complete. As per SOR.4.1.10

P/L cement concrete 1:1.5:3 cement coarse sand &20 mm graded stone aggregate etc. complete.As per SOR.5.1.2.

Centering & Shuttering etc. complete Raft As per SOR.5.9.1.

Centering & Shuttering etc. complete Wall As per SOR. 5.9.2

Centering & Shuttering etc. complete Slab As per SOR.5.9.3.

Mild Steel in R.C.C. Work etc. complete As per Analysis

Traffice Cone: Supply of red fluorescent with with reflective sleeve traffic cone a squre base of 300 to 500 mm & Thickness 35 mm and a heiht of 1000 mm to 500 mm. Thay shall be brilliant red / orange/yellow and shall be made of LDPE material that can be struck without causing damage to Impacting vehicles. Retro-Reflect orization of cone shall be provided by a 150 mm wide white band located 75 to 100 mm from the top of the cone and additional 100 mm wide white band located approximately 50 mm below the 150 mm band. The rate shall include all materials, labour, T&P, transportation, installation arid incidentals all complete as per direction of the Engineer-In-Charge: 500 mm hight

Providing and erecting direction and place identification retro-reflectorised sign as per IRC-67 made of high intensity grade sheeting The Retro reflective shenting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, Impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/ Government Laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from International condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory In India can be accepted provisionally, In such a situation, the Employer / Client, it so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012. Legends, letters, numerals and borders etc should be as per MoRTH specification No-801.3.7. Sheet fixed over aluminium sheeting 2 mm thick with area not exceeding 0.9 sqm. Supported on a mild steel single angle Iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm.,below ground level as per approved drawing, complete.

Pumping of water including all machinery and pump operator, labour etc. complete.

Cartage of Ballast ,Kankar,Coal, Grid or sand etc. including loading and unloading etc..complete, Up to 2 km. As per SOR (231a)5 1 Shifting of coarse sand, 2 Shifting of Stone Aggregate

P/F Unplasticized polyvinyal chloride pipes (UPVC) 150 mm nominal dia

S/F Signboard cost of all materials labour T&P etc. complete.

Please Enable Macros to View BoQ information