CONSTRUCTION OF 250 KVA SUB STATION FOR OUTDOOR ELECTRIFICATION FOR GIVING CONNECTIONS IN THE PREMISES OF JOINT INCOME TAX COMMISSIONER, REGION-01, MORADABAD UNDER THE JURISDICTION OF EUDD-I, MORADABAD

Amount

Safe carriage of material from Majhola Centre Store to worksite including its loading and unloading:

13 Mtr. long ST Poles.

8.5 Mtr. long PCC Poles.

ABC 3x95+1x70+1x16mm

11 KV and LT Line material.

250 KVA T/F

Digging of Pits, erection of 13 Mtr. long ST Double Pole including fixing and fitting of all required accessories by providing M.S. Clamps, Nuts & Bolts.

Digging of Pits, erection of 13 Mtr. long ST Single Pole including fixing and fitting of all required accessories by providing M.S. Clamps, Nuts & Bolts.

Digging of Pits, erection of 8.5 Mtr. long PCC single Pole including fixing and fitting of all required accessories by providing M.S. Clamps, Nuts & Bolts.

Fixing and grouting of Stay Rods including its binding and nozzeling at both ends as per RESSPO Norms.

Grounding of Earth Rods for making earthing of poles with the help of G.I. Wire, MS Clamps, Nuts & Bolts. Complete work.

Fixing and fitting of Distribution Boxes, three phase on poles for making consumers cable connection with the help of Alu. Lugs, M.S. Clamps, Nuts & Bolts. Complete work.

Laying, lifting and sagging of ABC 3x95+1x70+1x16mm with fixing of all type of clamps with the help of M.S. Clamps, Nuts & Bolts, Shackle Insulators. Complete work.

Laying and sagging of ACSR Dog Conductor in 11 KV line including its binding on insulators in all three phases making connections and jumpers etc. Complete work.

Laying and sagging of G.I. Wire including fixing of cross lesses binding with Alu. wire for making jaal under 11 KV line.

Construction of Transformer plinth of size 2x2x1.2 with the help of 1st class bricks and masonry in the ratio of 1:4 cement and coarse sand filling the structure completely with RCC, Cement, coarse sand and stone grit with MS Channel for resting the transformer wheel and 12mm thick plaster around the plinth. All material shall be provided by the contractor on his own cost.

Fabrication and erection of wire mesh fencing 01 Mtr. height, grouting of fabricated MS Angle 50x50x6mm, painting of fencing and supports with all material as per specification around 11/0.4 KV S/S. The fencing shall be made of 50x25mm, 10 gauge rectangular type wire mesh. Wire mesh shall be fixed on panel of 50x50x6mm MS Angle iron horizontally wire mesh on panel will be supported by 25x3mm MS Flat on all the bracing diagonally. All material shall be provided by the contractor.

Boring and lowering chemical earthing pipe for earthing of T/F body and neutral separately of 250 KVA T/F by providing G.I. Strip etc. including cost of all material. Complete work.

Safe placement of 250 KVA T/F on newly constructed MS Plinth including making connections and jumpers. Complete work.

Providing and fixing of danger board on poles with the help of MS Clamps, Nuts & Bolts. Complete work.

Providing & fixing of Barbed wire 01 KG per pole on poles.

Concreting of poles with the help of cement, sand and brick ballast in ration 1:4 including making plinth all around the pole.

M/S GREEN ENERGY INFRA PROJECTS

ARMY CONTRACTOR

HARSH ELECTRICALS