Loading…
Loading…
Tender Value
₹93.1 L
EMD Value
₹1.9 L
Closing Date
15 Jun 2026, 11:30 amDue tomorrow
Er Naveen Khatri
Exeuctive Engineer CP Division NO2 Road Sector 9 Chd
Recarpeting of Roads adjoining site Propsed Exhibition Centre and Concrete Hall in Saragnpur UT Chandigarh
2026_CHD_93246_1
CP2Road2874038
Open Tender
Civil Works - Roads
10 days
Chandigarh
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹1.9 L
11 Jun 2026
11 Jun 2026
15 Jun 2026
11 Jun 2026
15 Jun 2026
11 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | Item Code |
|---|---|---|---|---|---|---|
| 1 | Providing and laying 30mm thick bituminous concrete as per clause 507 of MORT&H specification with mechanical paver after mixing aggregate and bitumen as per design mix in Hot mix plant using minimum 5.4% bitumen of grade VG- 30 and using both coarse and fine aggregate filler stone dust @2% by weight of aggregate confirming to relevant specification laid in MORT&H specification clause 507.2.2 and 507.2.3 with grading confirming to table 500.17 gradation –II of MORT&H specification and density of bituminous concrete as laid 2.35 gm/cc complete in all respect as per MORT&H specification and to entire satisfaction of Engineer-in-charge. | 495.79 | Cum | 17,316.6 | ₹85,85,397.11 | NSR |
| 2 | Providing and laying tack coat with bitumen VG-10 @ 3.0 kg/10 sqm using sprayer pump on prepared surface heating bitumen in boiler and spraying bitumen with spray set fitted on bitumen boiler including cleaning of road surface with complete in all respect as per MORT&H specification and to the entire satisfaction of the Engineer-in-charge. | 15,024 | Sqm | 36.44 | ₹5,47,474.56 | NSR1 |
| 3 | Providing and applying 2.5mm (minimum) thick thermoplastic road marking paint for edge line, central line, stop line, segregation line, zebra crossing, all signs on road etc. The thermoplastic material should be homogeneously composed of pigment, hot resin and glass reflectorising beads @0.250 Kg/Sqm. The gradation of glass beads must be as per table 800.4 and properties of material should be as per table 800.3 of MORT&H specification (5th revision). The work should be complete as per MORT&H specification clause 803.4 complete in all respects and to the entire satisfaction of Engineer-in-charge. N.S. | 478.2 | Sqm | 377 | ₹1,80,281.4 | NSR2 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 5.24 MB
Tendernotice_2.pdf
PDF • 2.73 MB
BOQ_114148.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid