Renovation Interior fit out Works at ground floor and first floor, Intellectual Property Office, Sec-14, Dwarka, New Delhi

Providing and laying in position CEMENT CONCRETE of specified grade exluding

1.01 4.1 the cost of centring and shuttering-all work upto plinth level.

4.1.8 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Cum 50.00 6326.05 316302.50

Providing and laying machine cut, mirror polished, Italian Marble brass brass inlay

stone flooring laid in required pattern in linear portion of the building all complete

as per architectural drawings, with 18 mm thick stone slab laid over 20 mm

(average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and

11.51 jointed with white cement slurry @ 4.4 kg/sqm including pointing with white

cement slurry admixed with pigment to match the marble shade including rubbing,

curing and polishing etc. all complete as specified and as directed by the Engineer-

11.51.1 18 mm thick Italian Marble stone slab in all colour and shade Sqm 610.00 6095.50 3718255.00

laminated wooden flooring of 13 mm thickness as per the direction of EIC and

Providing and laying vitrified floor tiles in different sizes (thickness to be specified

by the manufacturer) with water absorption less than 0.08% and conforming to IS:

15622, of approved make, in all colours and shades, laid on 20mm thick cement

11.41 mortar 1: 4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/

sqm including grouting the joints with white cement and matching pigments etc.,

Digitally signed by SANJAY

S NO DSR/ MR DESCRIPTION UNIT RATE DSR AMOUNT NON-DSR AMOUNT

Providing and fixing removable raised/false access flooring with systemand its

components of approved make for different plenum height with possible height

adjustment upto 50 mm, comprising of modular loadbearing floor panels

supported on G.I. rectangular stinger frame workand G.I. Pedestal etc. all

complete, as per the architectural drawings, as specified and as directed by

(a) Providing at required spacing to form modular framework, pedestals made out

of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on

to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the

pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI

fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the

stud for level adjustment upto 50mm, locking and stabilizing the pedestal head in

(b) Stringers system in all steel construction hot dipped galvanized ofrectangular

size 570x20x30x0.80mm thick having holes at both ends for securing the stringers

11.54 on to the pedestal head using fully threaded screws ensuring maximum lateral

1.05 stability in all directions, the grid formed by the pedestal and stringer assembly

shall receive the floor panel, this system shall provide adequate solid, rigid

support for access

(c) Providing floor panel,

and fixing AccesstheFloor

system shallofprovide

panel a minimum

600x600x32 mm clear

Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access

Floor panel shall be steel welded construction with an enclosed bottom pan with

uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel

Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64

welds in each dome and 20 welds along each flange). The panel should be

Corroresist epoxy coated for lifetime rust protection and cavity formed by the top

and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core

mixed with lightweight foaming compound. The access floor shall be factory

finished with Anti-static High Pressure laminate with Non Warp technology upto

1mm thickness for superior adhesion and Surface flatness within 0.75mm.The

11.54.2 450 mm Finished Floor Height (FFH). Sqm 20.00 5407.15 108143.00

TILE DADO :- Providing and fixing Ist quality ceramic glazed wall tiles

conforming to IS: 15622 (thickness to be specified by the manufacturer), of

approved make, in all colours, shades except burgundy, bottle green,

black of any size as approved by Engineer-in-Charge, in skirting, risers of

steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3

coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,

including pointing in white cement mixed with pigment of matching shade

Supply of 100 mm Aluminium (Grade 6063) Skirting with 15 micron anodising In

1.06 MR Natural Finish. Thichness 1.30 to 1.50 mm. Designed to conceal screws. Metre 300.00 286.00 85800.00

Seamless finish. Complete with Rubber/ PVC Jointers and Gasket.

Digitally signed by SANJAY

S NO DSR/ MR DESCRIPTION UNIT RATE DSR AMOUNT NON-DSR AMOUNT

Providing and laying Carpet tiles of Yarn type Eco Solution Q® Nylon (Nylon 6)

only; Multi-Level Pattern Loop, manufactured using 100% solution dyeing process,

Tiles of size 23cms x 91cms or equivalent as per direction of EIC and site

requirement with SSP® Soil Protection treatment ™ or equivalent containing

properties of Stain Repel, with Ecoworx® Tile- 100% PVC Free/ 100% Bitumen

Free/ 100% Recyclable - backing system with recycled content, made from

thermoplastic polyolefin compound with reinforcing layer high-performance

environments requiring modular flooring, having tufted yarn weight of 542.5

gsm/sqm and average yarn density of Minimum 9143 oz/cu. yd. or more, Nominal

total thickness 5.42 mm minimum, Radiant Panel class 1 rated (ASTM E648),

NBS smoke < 450, Pill test -Passed, Anti Static Property less Than 3.5 kv,

Texture Appearance Retention Rating of 3.5 for Severe Use, Anti Microbial

Treatment-Passes (AATCC-174). CRI Green Label Plus is certified for indoor air

quality, including fixing/ installation with Low/ Zero VOC content Adhesive. Impact

Sound (ISO 10140-3) 20 dB & Sound absorption (ISO 354) 0.2 Class D.or

equilent as per direction of EIC and site requirement

TOTAL FLOORING WORKS 7560513.00 1806300.00

Digitally signed by SANJAY

S NO DSR/ MR DESCRIPTION UNIT RATE DSR AMOUNT NON-DSR AMOUNT

2 FALSE CEILING WORKS

Providing and fixing false ceiling at all height including providing and fixing of

frame work made of special sections, power pressed from M.S. sheets and

galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277

and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of

27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling

with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of

cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts &

bolts of required size and other end of angle hanger fixed with intermediate G.I.

12.45 channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to

2.01 which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered

flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall

be fixed in a direction perpendicular to G.I. intermediate channel with connecting

clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including

fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and

30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl

plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval,

including fixing of gypsum board to ceiling section and perimeter channel with the

help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I)

:2011 (Board with BIS certification marks)

BAFFLE CEILING: Providing & Installation of Baffle ceiling system comprises of

50 mm x 100 mm (50 mm width & 100 mm Height) or equivalent as per site

requirement and direction of EIC U Shape panels in RAL color finish. Panels shall

be made of 0.5 mm thick galvanized steel after Powder-coated and length up to

2.02 MR 4000 mm. Panel shall be high corrosion resistance and good color stability. Centre Sqm 400.00 4965.00 1986000.00

to Centre panel gap will be 150 mm. Panels are fixed on to roll formed carriers 20

mm wide x 40 mm deep out of 0.80 mm G.I sheet Powder-coated color with

cutouts to hold the panels in module of 50 mm at maximum 1200 m c/c. Carriers

are suspended from the roof or truss by 6 mm dia. galvanized steel wire rod

hanger with special height adjustment suspension clip at max. 1200 mm c/c.

Digitally signed by SANJAY

S NO DSR/ MR DESCRIPTION UNIT RATE DSR AMOUNT NON-DSR AMOUNT

Providing and fixing horizontal level Open cell GI lay-in ceiling tiles with border

panels forming board edge of size 600x600x38mm (Nominal) having cell size of

200x200mm made of 120 gsm galvanized steel as per IS 277 (2003) suitable for

architectural finishes in 0.35mm thickness as per in IS:513 (1994) in Global white

color. To create triangle, a diagonal component of length 265.40mm & height of

14.30mm should be fitted within 200x200mm open cell. The tile shall be

electrostatically polyester powder coated using RoHS compliant powder having

coating thickness ranging from 60-80 microns. The powder coating shall pass Salt

Spray Test for 750 hours as per ASTM B117, QUV –A Test for 1000 hours as per

ASTM G-154 – (Cycle – 1) and Humidity test for 1000 hours as per DIN 50017.

The powder coating shall have an adhesion of GT0 as per EN ISO 2409. The

shade variation across batches shall be delta E<1 using Excite/BYK Gardner

instrument and gloss level of 25±5% at 60˚ as per ASTM D523. Tile shall have a

Fire Performance class A1 as per EN-13964. SUSPENSION: The tile shall be laid

on manufacturer’s Suprafine 38 with 15 mm wide T - section flanges colour global

2.03 MR white (matching to tile colour) having double stroke rotary stitching on all T sq m 1200.00 4245.00 5094000.00

sections i.e., the Main Runner, 1200 mm & 600 mm Cross Tees with a web height

of 38mm (all sections). The deflection loading of the system shall be 12.5 kg/m2

(as per standard installation layout mentioned below) and main beam tested as

per ASTM C635 (Deflection limit less than L/360) with a deflection loading of

15kg/m. The end details of the cross tee shall be made of pre hardened steel clip

fixed to the ends of the cross tee to provide double locking between “cross tee to

cross tee” and “cross tee to main beam”. All main beam to main beam and cross

tee to cross tee connection shall have a pull-out strength of more than 100kg. The

T Sections shall be made of hot dipped galvanized steel 90 gsm and pre-painted

steel with baked polyester paint of 0T bending capability INSTALLATION: To

comprise main runner spaced at 1200mm securely fixed to the structural soffit

using Knauf suspension system (specifications below) at 1200mm maximum. The

First/Last manufacturer’s suspension system at the end of each main runner shall

not be greater than 450mm from the adjacent wall along with the first and the last

main beam shall be at less than 600mm from the wall.

Digitally signed by SANJAY

S NO DSR/ MR DESCRIPTION UNIT RATE DSR AMOUNT NON-DSR AMOUNT

Providing and fixing mineral fibre false ceiling tiles at all heights of size

595X595mm of approved texture, design and pattern. The tiles should have

Humidity Resistance (RH) of 99%, Light Reflectance ? 85%, Thermal Conductivity

k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true

horizontal level suspended on interlocking T-Grid of hot dipped all round

galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of

main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of

length 1200 mm and secondary intermediate cross T of size 15x32 mm of length

600 mm to form grid module of size 600x600 mm suspended from ceiling using

galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter

26.27 M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm

length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre

to centre along main ‘T’. The system should rest on periphery walls /partitions with

the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick

sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to

centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-

sections used in false ceiling support system shall be pre-painted with polyester

baked paint, for all heights. The work shall be carried out as per specifications,

drawings and as per directions of the engineer-in-charge

26.27.1 With 16 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6 Sqm 600.00 2069.90 1241940.00

STRETCHED FABRIC CEILING : Supply & installationof fabric false ceiling / wall

formed out with TRANSLUCENT Printed fabric coverings made out of polyester

knitted fabric coated with Polyurethane (PU). The TRANSLUCENT Printed fabric

width of 2m, 3m, 4.1m &5.1m with weight of 200gm/m2, thickness of 0, 3 mm. The

appearance of fabric is matt, smooth and uniform with blanq color and light

transmission of 50%. The tear strength of fabric should be accordance to CH:

4,5daN; TR: 6,5 daN. The fire rating should be accordance to B-S1, d0. The fabric

2.04 MR should be humidity resistant and free of carcinogenic substances(CMR) or volatile Sqm 20 11863.00 237260.00

organic Compounds (VOC’s). At labeling in accordance with the French decree

no. 2011- 321, Oeko-Tex standard100 certified. Fabric should be installed with

approved manufacturer guidelines. It comes with 10- year manufacturer

guarantee. The installation of TRANSLUCENT Printed fabric should be dry

installation & done at room temperature using CLIPSO PVC, ABS Grippers.

Clipso ceiling base to be made of MS or Wooden frame finishing to a flush finish

of tapered and square edges in desired design as per architect

Wall painting with premium acrylic emulsion paint of interior grade, having VOC

(Volatile Organic Compound ) content less than 50 grams/ litre of approved brand

13.83 and manufacture, including applying additional coats wherever required to achieve

even shade and colour.

TOTAL FALSE CEILING WORKS 2738630.00 7317260.00

3 WALL FINISHES WORKS

Digitally signed by SANJAY

S NO DSR/ MR DESCRIPTION UNIT RATE DSR AMOUNT NON-DSR AMOUNT

Supply and installation of Aluminium Framed Glass Partition for minimal frame,

room dividing solutions. Single glazed demountable glass partition using clear

toughened glass in proprietary natural anodized finish. Clip-on / U-Section of size

30mm x 21mm with suitable gaskets for insertion with glass. It also consists of

clipper two way Clear Profiles, 90 Degree L Junction and T Junction profiles

suitably to be used as per room configuration designs.

3.01 MR Glass thickness - 10mm (LSG). Sqm 200.00 4965.00 993000.00

All Profiles are min 2.5mm thickness excluding 20 microns of Anodizing,

Standards applicable.

• Aluminium profile made by Al Alloy 6063-T6 Grade including all the fittings

complete as per site requirement and direction of EIC

Providing wood work in frames of doors, windows, clerestory windows and other

3.02 9.1 frames, wrought framed and fixed in position with hold fast lugs or with dash

fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for

9.1.1 Second class teak wood cu m 2.00 131576.95 263153.90

Providing and fixing specified wood frame work consisting of battens 50x25mm

3.03 8.27 fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming

8.27.1 Kiln seasoned and chemically treated hollock wood cu m 2.00 163814.10 327628.20

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I)

non-decorative type, core of block board construction with frame of 1st class hard

3.04 9.21 wood and well matched commercial 3 ply veneering with vertical grains or cross

bands and face veneers on both faces of shutters:

9.21.1 35mm thick including ISI marked Stainless Steel butt hinges with necessary Sqm 60.00 2015.75 120945.00

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum

3.05 9.23 depth on all edges of flush door shutters (over all area of door shutter to be Sqm 60.00 401.40 24084.00

Providing and Fixing ESDH 1236-22X922 mm Dtype Handle Material : Stainless

3.06 MR Steel. Finish : Satin Stainless Steel (SSS). of approved make and model all Each 50.00 6070.00 303500.00

complete as per the direction of Engineer-in-charge.

Providing and Fixing EMB 245 SS Mortise Lock Body SB/TB for door thickness 25-

3.07 MR 50 mm for wooden doors of approved make and model all complete as per the Each 10.00 896.00 8960.00

direction of Engineer-in-charge.

Digitally signed by SANJAY

S NO DSR/ MR DESCRIPTION UNIT RATE DSR AMOUNT NON-DSR AMOUNT

Providing and Fixing FH-943 Double cylender Floor Spring- for wooden door with

Closing Force EN 3 with Maximum door weight 105 Kg. Maximum door width

Final closing speed : 15-0°. Hold Open (standard): 90° hold open. Weight of floor

spring approx : 6kg, 5,00,000 cycles Tested with 5 Years Warranty against

Providing 40x5mm flat iron hold fast 400mm long including fixing to frame with

10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete

block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone

Providing and Fixing EFS ACC-001,002 top and Bottom Strap for wooden doors

3.10 MR of approved make and model all complete as per the direction of Engineer-in- Each 26.00 1128.00 29328.00

Providing and Fixing EDL 024 Dead lock Back set- 50 mm with Key Hole for

3.11 MR wooden doors of approved make and model all complete as per the direction of Each 26.00 954.00 24804.00

Engineer-in-charge.

Providing and Fixing ECY 1060- 60 mm SS Cylinder One side knob and one side

regular key (3 key) for wooden doors of approved make and model all complete

as per the direction of Engineer-in-charge.

Providing and Fixing FHHS 3100 (EN 1154) - Double cylinder Floor Spring with

Top-Bottom Patch,pivot and Bottom Patch Lock Maximum door weight 100 Kg.

Maximum door width 1000 mm.Closing speed : 120°,Final closing speed : 15-0°.

3.13 MR Hold Open (standard): 90° hold open.Suitable for 10-12 mm glass Each 30.00 9858.00 295740.00

Weight of floor spring approx : 6kg

5 Years Warranty against manufacturing defect with 5,00,000 cycles Tested

approved make and model all complete as per the direction of Engineer-in-charge.

Providing and fixing 12mm thick frameless toughened glass door shutter of

approved brand and manufacture, including providing and fixing top & bottom

pivot & double acting hydraulic floor spring type fixing arrangement and making

necessary holes etc. for fixing required door fittings, all complete as per direction

of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Digitally signed by SANJAY

S NO DSR/ MR DESCRIPTION UNIT RATE DSR AMOUNT NON-DSR AMOUNT

Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special

CRYSTAL-effect film to reproduce Sand-blasting effect on glass with customised

designs, thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8)with adhesive

having minimum tensile strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C).

3.15 MR Adhesion after 24hrs of installation should be 4 pounds/inch (0.7 kg/cm) on Sqm 100.00 2467.00 246700.00

Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight)

to 15yrs (indoors) must be endorsed by 3M India Limited Architectural Market

Department. Contractors payment wouldn't be released until & unless he/she

produces orginal warranty certificate from the manufacturer.

Supply and installation of Automatic Horizontally Retractable Acoustical

Wall(s) as shown on the architectural drawings.

Track and Rollers: Top hung system with track and heavy duty roller system.

Supplied with necessary track plates, track strips, threaded rods, nuts and

washers, alignment pins etc. Tracks are supported by adjustable steel hanger

brackets connected to structural support pairs of 12mm diameter threaded rods.

Brackets supports the load bearing surface of the track. Track consists of natural

architectural-grade aluminum alloy capable to bear the per panel load of 800 Kgs.

The transfer areas are provided with aluminum junctions, switches and curves to

ensure smooth transition of panels in the parking. The trolley is made of steel and

provided with stainless steel rollers to ensure durability and smooth operation held

with the 16mm bolt connected to the frame.

Suspension System: The ceiling track is to be fixed with an adjustable steel

suspension of threaded rods. This steel suspension should be adjustable to

ensure absorbtion of the eventual deflection of the ceiling. The threaded rods

should be protected against corrosion.

3.16 MR Wall Panels: 110mm thick standard panels, filled with sound insulation materials Sqm 16.00 55405.00 886480.00

are provided with MDF cover boards. The panels are interconnected by means of

a concave / convex interlocking aluminum anodized profiles provided with an

integrated EPDM magnetic strip and a vinyl acoustic seal running along the height

of the interlocking profile. The skeletal frame of each element is constructed of a

non-deflecting zinc coated steel tube with the aluminum anodized edge protecting

profiles on both sides of the steel frame, bolted together. The cover boards are of

16mm thick MDF board, held in acoustic free suspension with the skeletal frame

and within the side profiles. Each panel to have top and bottom operable EPDM

pressure seals operated by a crank handle to ensure optimum contact pressure of

1500N. The system is equipped with an adjusting panel at one end of the wall.

This panel normally at the closing end of the wall has a telescopic adjusting panel

built with the same materials as the other panels and is operated, together with

the top and bottom seals, by an internal three-way spindle mechanism. The

telescopic sliding element stroke is 120 mm. There are aluminum profiles provided

on both sides of the walls for better acoustics. In case of a provision of a door

within the wall, the door frame jambs is provided with retractable seals for

complete and tight closure of the door panel to the floor. In case of a provision of

Digitally signed by SANJAY

S NO DSR/ MR DESCRIPTION UNIT RATE DSR AMOUNT NON-DSR AMOUNT

Providing and fixing of 6 mm thick premium GRIHA rated Lacquered glass of

approved color by Architect/ Client / Customer, fixed with compatible neutral

grade silicon on a perfectly levelled 12mm thick water proof marine plywood /

MDF / Mineral fibre board which is mounted on RCC wall/any other structure.

Lacquered glass must be made industrially (using curtain coating process);

opaque (if viewed against a support wall), uniformly coated with PU lacquer (50

3.17 MR micron thick coating or more); panel to panel colour consistency (measured by Sqm 80.00 4868.00 389440.00

photo spectrometer); highly durable (passes hardness test for minimum 220

oscillations); humidity resistance (conforms to BS EN 1036 1999 or

equivalent) ; environmentally friendly having Low VOC (no lead, no arsenic, no

copper, no formaldehyde), low VOC content <100g/l. Silicone used should not

react with lacquer coating (compatible neutral cure silicon)

Providing and fixing partition upto ceiling height consisting of G.I. frame and

required board, including providing and fixing of frame work made of special

section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both

side inclusive), consisting of floor and ceiling channel 50mm wide having equal

flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing

of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length

or suitable anchor fastener or metal screws with nylon plugs and the studs 48mm

wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed

vertically within flanges of floor and ceiling channel and placed at a spacing of 610

mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along

both ends of partition fixed flush to wall with suitable anchor fastener or metal

3.18 9.105 screws with nylon plugs at spacing of 450mm centre to centre, and fixing of

boards to both side of frame work by 25mm long dry wall screws on studs, floor

and ceiling channels at the spacing of 300mm centre to centre. The boards are to

be fixed to the frame work with joints staggered to avoid through cracks, M.S.

fixing channel of 99mm width (0.9mm thick having two flanges of 9.5mm each) to

be provided at the horizontal joints of two boards, fixed to the studs using metal to

metal flat head screws, including jointing and finishing to a flush finish with

recommended jointing compound, jointing tape, angle beads at corners (25mmx

25mmx0.5 mm), joint finisher and two coats of primer suitable for board as per

manufacturer's specification and direction of engineer in charge all complete.

75mm overall thickness partition with 12.5mm thick double skin fire rated Glass

9.105.1 Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: part 3 (Board Sqm 100.00 1797.65 179765.00

with BIS certification marks)

Providing fixing thermal insulation of ceiling (under deck insulation) with Resin

Bonded Fibre glass wool conforming to IS : 8183, density 24kg / m3, 50mm thick,

3.19 12.34 wrapped in 200 G Virgin Polythene bags, fixed to ceiling with metallic cleats Sqm 600.00 597.85 358710.00

(50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24 gauge wire mesh, for top

most ceiling of building.

Digitally signed by SANJAY

S NO DSR/ MR DESCRIPTION UNIT RATE DSR AMOUNT NON-DSR AMOUNT

Providing & supplying of Window Blinds per the approved sample Duette double

honeycomb shades with easy rise operating system as per following specifications

fabric specifications: • Original Non-woven honeycomb shade shaving soft fabric

appearance and high energy-efficient fabric with high tear strength constructed

out of Anti static, resilent, colour fast & Sanitized Treat 100% spun bonded non

woven polyester fiber & precision manufacture to form a hexagonally shaped

duette pleat• Pleat dimension ¾”Honeycomb within a Honeycomb” with 3 air

pockets for maximum energy efficiency. •Shadings are duotone, with neutral tone

facing the exterior and color facing the interior The Head rail. Shall measure 49.68

wide and 36.66mm deep & thick 1.27mm extruded from 6063 T6 alu. alloy& shall

be powder coated to a smooth finish with a thickness of 40 microns. Fabric shall

be constructed from spun-bonded polyester fiber, precision manufactured to form

a hexagonally shaped, dual pleat, cellular construction. All cords & cord holes

shall be fully concealed inside the fabric structure. As each of the hexagonal cells

is formed individually, pleats operate independent of each other providing superior

3.20 MR pleat retention & structure strength. Installation brackets. shall be of high tension Sqm 70.00 9354.00 654780.00

spring steel suitable for overhead & wall mounting 30mm Duette Hartford

mounting bracket. Head rail covered with Sydney Valance of height 80mm made

up of Aluminium & L shape moving Rail includes “Click & Engage" method of

dimension 50mmX55mmsticked with integrated moving rail magnets provide a

streamlined look, reduce centre light gap, and promote easier operation. Polyster

cord. Shall be 0.9mm in diameter & of woven hollow core end cap shall be molded

acrylic color matched to the head & bottom rails. Bottom rail shall be a single

channel section, measuring 30mm wide and 12.5mmdeep & thickness 1-1.2mm

extruded from 5005 H-16 alu. Alloy & shall be powder coated with a smooth finish

to a thickness of 15- 25 microns. Hold-Down bracket (optional) shall be molded in

clear acrylic. It incorporates a pin for engagement with the bottom rail end-cap. It

shall be suitable for sill, face or side facing. Cord Equalizer shall be injection

melded from impact modified acrylic with a high flexural modulus

Digitally signed by SANJAY

S NO DSR/ MR DESCRIPTION UNIT RATE DSR AMOUNT NON-DSR AMOUNT

Providing & supplying of Window Blinds as per the approved sample in required

shade and style consisting, of Roller Blindscomprising of optima screen Fabric

comprising of 22% polyester, 78% PVC, Fabric weight 460-480G weight per sq m,

Thickness 0.67 mm, Yarn count 18-19/cm, having fire resistance standard –

NFPA 701-89 small testing ISO-5659-2 .The tear resistance should be complying

to ISO4674 & breaking resistance – ISO 5081. The DRIVE UNIT shall be of clutch

for quick,easy and safe installation,moulded plastic with steel spring support and

3.21 MR inserted into the tube end. It shall be driven by a ball chain pulley with ball chain sq m 280.00 2806.00 785680.00

and can be positioned at right side or left hand side of the Shade. The Shade

when lowering or raising, shall be automatically locked in position upon release of

the ball chain by means of a built in friction lock.Universal clutch for left and right

hand operation.Chain Gear Ratio of 1.75:1.The END PLUG shall be molded of

plastic witha steel location pin. The plug shall be inserted into the tube end.

(Opposite to the Drive Unit) for ease of installation. TheSUPPORT BRACKETS

shall be of coated steel & provided with covers and used in right hand or left hand

positions differentiated by the acceptance of the of the rectangular drive unit

Digitally signed by SANJAY

S NO DSR/ MR DESCRIPTION UNIT RATE DSR AMOUNT NON-DSR AMOUNT

ZEBRA BLINDS - 190g/sqm, thickness - 0.50 mm - 0.70mm ( opaue part ),

Colorfastness to light - above 4 grade. Blind tube is made of Aluminum with

a diameter of 36mm, botom rail is made of Aluminumwith powder coated

having weight 390 gm/meter fitted with end caps in colour matching to

thefabric and mechanism is of plastic with chain and metal bracket. The

Blinds comes with Aluminum cover with the matching fabric designed on

it. Aluminium profile should have temper WP consisting of alloy 63400 along

with anodizing of 10 micron and powder coating of 60 micron. The tensile

strenghth of profile should be 9.10 Kg/mm square and elongation 18.The

control clutch driveunit engineered heavy duty chain drive pulley

operating system consisting of gear clutch housing and locking plug

containing minimum 6 ribs and inserted at minimum of 38mm into roller

tube. It is self-lubricating Exclusive clutch with safety pins for secure

bracket installation and unlocking pin for quick manual removal. Universal

clutch is most convenient for large windows down to the smallest windows.

It shall be driven by a ball chain pulley with ball chain and can be

positioned at Right hand or Left hand side of the shade. Clutch gear ratio

of 1.75:1 for reduced operating force on larger blinds.. Mounting hardware

brackets universal brackets including end plug bracket with lock down

retainer device.Brackets finish of powder coated metal installation

brackets made of stamped and hardened steel. Roller tube circular-

shaped aluminium tube extruded from alloy 63400 and temper WP. Bottom

rail flat-shaped extruded aluminium from alloy 63400 and temper WP. Ball

chain shall be 2mm diameter cord with plastic balls moulded to form an

endless ball chain. It is used for raising or lowering action of the shades.

Plastic parts all plastic components are UV-stable compounds available

PELMET: Fabricate and install pelmet made of 19 mm thick board, up to 300 mm

3.22 MR high and in line with external glazing as per details of Architect. Rate to include metre 371.70 1782.00 662369.40

finishing exposed surfaces of the Pelmet with enamel paint of approved shade or

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class

3.23 designation 7.5 in superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 100.00 1018.05 101805.00

3.24 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third Sqm 60.00 86.45 5187.00

course of half brick masonry.

13.4 12 mm cement plaster of mix :

Digitally signed by SANJAY

S NO DSR/ MR DESCRIPTION UNIT RATE DSR AMOUNT NON-DSR AMOUNT

3.25 1:4 (1 cement: 4 coarse sand)

Providing and applying plaster of paris putty of 2 mm thickness over plastered

surface to prepare the surface even and smooth complete.

Providing and fixing plain lining with necessary screws/ nuts & bolts/ nails,

9.140 including a coat of approved primer on one face, and fixed on wooden/ steel frame

12mm as per direction

thick commercial of Engineer-in-Charge

ply conforming to IS : 1328 BWR type

Providing and fixing plain lining with necessary screws/ nuts & bolts/ nails,

3.30 MR including a coat of approved primer on one face, and fixed on wooden/ steel frame

work, complete as per direction of Engineer-in-Charge

4mm thick MDF Board Sqm 650.00 273.00 177450.00

Providing and fixing metal system up to ceiling height, which includes frame work

made of special section power pressed/ roll form G.I. sheet with zinc coating of

120 GSM, consisting of Boral U track 52mm wide having equal flanges of 30mm

and 0.55mm thick (Base metal thickness) fastened to the floor slab and ceiling

3.31 MR soffit using rawl plugs with screw at 600mm centers, with first & last fixing point at Sqm 820.00 1022.00 838040.00

not greater than 50 mm from either end. Boral C studs 50mm wide having one

flange of 34mm, other flange 36mm, lip size 6 mm and 0.55mm thick installed

perpendicularly within the flanges of floor and ceiling channels located directly

opposite to each other at not more than 610mm centers. Maintain 5 to 10mm gap

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain

3.32 9.127.2 in gloss / matt/ suede finish with high density protective surface layer and reverse Sqm 740.00 764.00 565360.00

side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of

& approved quality-

fixing 12mm 1.0

Thick. mm Thick

100% Acrylic solid surface of approved make and

colour using approved Adhesive to 12 mm thk. Waterproof Plywood of approved

brand as per shape, pattern & details given in the drawing. The rate includes

3.33 M.R. providing & fixing beading, cutting, scaffolding, nails, all materials, labour, lead, SQM 15.00 11500.00 172500.00

lifts, HOM etc., complete.-for Lift Cladding. (The make, Shade, pattern etc., to be

approved by Architect).

Providing and fixing 4mm thick coir veneer board, ISI marked IS : 14842, plain

3.34 8.29 lining with necessary screws, priming coat on unexposed surface etc., complete. SQM 10.00 1549.45 15494.50

Digitally signed by SANJAY

S NO DSR/ MR DESCRIPTION UNIT RATE DSR AMOUNT NON-DSR AMOUNT

Polishing in high gloss/matt finish melamine clear polish on wood work in

required color/wooden shade texture with following process in the sequence

as detailed below:

1. The surface to be polished is rubbed with sand paper 80/120 no. and then

with sand paper of 160/180 nos.

2. Applying two coats of sealer with spray gun and allowing sufficient drying

time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.

3. On drying of sealer coat, wet rubbing with emery cloth of finer grading

with ample water to remove excess sealer layer and make the surface further

smooth after this wet rubbing, then surface is applied with special grade

melamine fillers to fill all the small and big holes/grooves etc. Filler coat to

3.35 13.116 be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done SQM 10.00 1156.55 11565.50

this surface is further allowed to dry for 12 hrs.

4. On this, 1st coat of melamine polish is applied with spray gun using

melamine clear polish and melamine thinner in required proportion. This

1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet

rubbed smooth, which is further allowed to dry for 12 hrs. The final

melamine polish is applied with compressor pressure spray gun using

melamine clear polish and melamine thinner mixed in required proportion

complete as per direction of Engineer-in-Charge. (Final coat to be done in

1 or 2 layers without gap of time.)

TOTAL WALL FINISHING WORKS 4040149.10 7710661.40

4 MISCELLANEOUS WORKS

Modular kitchen - Under counter storage cabinets:

Providing & fixing factory made modular kitchen cabinets in modular type

knockable cabinet boxes with openable shutters and sufficient number of drawers

made of 18mm thick ISI marked commercial ply, all ply to be laminated with

4.01 MR 0.8mm laminate. All shelves should be supported on approved quality SS pins Sqm 10.00 7249.00 72490.00

and shall be adjustable for different heights as per requirements.Shutters and

drawers fascia shall be at least 18mm thick with laminate on both sides with 18mm

wide 2mm thick PVC edge banding. All Shutters finished in high gloss acrylic of

approved. The cabinet boxes of floor units will be supported by 100mm height

vertical adjustable legs which will be covered with PVC skirting in brushed

Digitally signed by SANJAY

S NO DSR/ MR DESCRIPTION UNIT RATE DSR AMOUNT NON-DSR AMOUNT

Modular Kitchen - Overhead storage wall units:

Providing & fixing factory made modular kitchen cabinets in modular type

knockable cabinet boxes with openable shutters and sufficient number of drawers

made of 18 mm thk. ISI Marked comm. ply. All ply to be laminated with 0.8 mm

laminate.All shelves should be supported on approved quality SS pins and shall

4.02 MR be adjustable for different heights as per requirements.Shutters and drawers Sqm 10.00 12165.00 121650.00

fascia shall be at least 18mm thic with laminate on both sides with 18mm wide

2mm thick PVC edge banding, All Shutters finished in high gloss acrylic of

approved. The unit shall be fixed to the floor/ wall/slab using metal screws of

appropriate size and raw plugs. Only front face area of cabinets and skirting from

floor to topand

Providing of boxes

fixing ofshall be considered

Innotech with metalforsides

measurement and

and quadro payment. Cabinet

4.02B MR Providing and fixing baskets Each 5.00 4013.00 20065.00

Providing and laying water proofing treatment to vertical and horizontal surfaces

of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of

applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound

conforming to IS 2645 in recommended proportions including rounding off junction

of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1

4.03 22.3 cement : 3 coarse sand) mixed with water proofing compound in recommended Sqm 50.00 774.25 38712.50

proportion including rounding off junction of vertical and horizontal surface. (iii)

IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of

area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC

sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7

Preparation of complete set of shop drawings including finishing, MEP services,

details, design calcualtions etc. and any other details as and when desired by

4.04 MR Engineer In charge /client. A qualified professsional for the purpose shall be Lot 535000.00 1.00 535000.00

appointed after due appproval from Engineer In Charge.

Digitally signed by SANJAY

S NO DSR/ MR DESCRIPTION UNIT RATE DSR AMOUNT NON-DSR AMOUNT

4.05 MR Providing and fixing wallpaer as desired by client and EIC Sqm 80.00 1950.00 156000.00

TOTAL MISCELLANEOUS WORKS 38712.50 922945.00

DISMANTLING WORKS

Dismantling of existing workstation, flooring, ceiling, partitions and other fixture

installed in ground anf first floor in all respect including cleaning and clearing the

MR site. Disposal of the material at appropiate location as per the guidelines of local Lot 548211 1.00 548211.00

authority. Stacking of scrapped material at suitable place as per direction of

engineer in charge for buy back/ auction

Digitally signed by SANJAY

SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS

QUANTIT NON-DSR

DSR NO S NO DESCRIPTION UNIT RATE DSR (INR)

NS 1.00 Providing amd chemically sealing joints to sand cast iron/centrifugally

cast (spun) iron pipes and fittings of diameter - -

NS Providing & fixing glazed vitreous china single trap syphonic pattern

having back inlet ,supporting chair ,wall hung water closet with cistern

complete with all internal fittings/accessories and CP brass flush bend

(European type) water closet with seat and lid, with C.P. brass hinges

and rubber buffers, adapter, rubber joints fixed to W.C., C.P. brass

screwed washers including cutting and making good the walls and floors

wherever required and HDPE wc pan connector including jointing with

white cement coomplete in all respects

Wall hung W.C. pan (White colour)with white plastic seat & lid

"Thermoset moulded ( bakelite ) IS 2548 Part I

1.03 For supply,installation,testing & commissioning of sanitary fixtures as per Each 20 23196.81734 463936.3468

NS Providing & fixing glazed vitreous china wash basin with R.S. or C.I.

brackets painted white, 32mm C.P. brass waste of standard pattern , C.P

brass wall flange 32 mm dia. C.P. brass bottle trap and union 32 mm dia

C.P. pipes to wall flange. complete including cutting and making good the

walls wherever required.

Undercounter wash basin (White colour)of size: 585x430 mm

1.04 For supply,installation,testing & commissioning of sanitary fixtures as per Each 15 8077.673586 121165.1038

NS Table top wash basin (white colour)of size: 440x440 mm

Digitally signed by SANJAY

1.05 For supply,installation,testing & commissioning of sanitary fixtures as per Each 3 9998.497015 29995.49104

NS Providing & fixing 15mm C.P. brass single hole wash basin mixer without

popup waste system with 450mm long copper pipes and brass nut

1.06 For supply,installation,testing & commissioning of sanitary fixtures as per Each 20 4253.67878 85073.5756

NS Providing & fixing vitreous chinaware urinal comprising

NS Large flat back wall hung urinal in glazed vitreous China new magnum

15 mm electrically operated solenoid valve with infra red sensor mounted

in a box with SS Cover.

CP brass chromium plated flush piping from solenoid valve to urinal

terminated with a 15 mm screwed spreader

32 mm nominal bore CP cast brass waste

32 mm nominal bore CP cast bottle trap with extension pipe rubber

adopter for waste connection, CP brass wall flange.

1.07 For supply,installation,testing & commissioning of sanitary fixtures(white Each 15 28081.74419 421226.1629

colour) as per above details.

NS Providing & fixing stainless steel sink R.S. or C.I. brackets painted, 40mm

C.P. waste, C.P. brass chain and rubber plug, 40mm C.P. cast brass

bottle with necessary union complete including cutting and making good

the walls wherever required

Stainless steel sink single bowl with drain board(size 510x1040mm) of

1.08 For supply,installation,testing & commissioning of sanitary fixtures as per Each 4 12447.58636 49790.34546

NS Providing & fixing Sink Mixer with Swinging Casted Spout (Wall Mounted

Model) with 450mm long Copper Pipes & Brass Nuts.CP brass wall

Digitally signed by SANJAY

1.09 For supply,installation,testing & commissioning of sanitary fixtures as per Each 4 5077.705828 20310.82331

NS Providing & fixing toilet paper holding including cutting and making good

1.1 For supply,installation,testing & commissioning of sanitary fixtures as per Each 20 1993.652229 39873.04458

NS Providing & fixing Horizontal liquid soap dispenser with stainless steel lid

and brackets fixed to wooden cleats with C.P. brass screws.

1.10 For supply,installation,testing & commissioning of sanitary fixtures as per Each 16 3579.162143 57266.59429

NS Providing & fixing C.P. brass coat hooks fixed on toilet door with C.P.

1.11 For supply,installation,testing & commissioning of sanitary fixtures as per Each 20 605.1362593 12102.72519

NS Providing & fixing beveled edge mirror 5.5mm thick of superior quality

plate glass complete with 6mm thick marine ply sheet ground fixed to

wooden cleats with CP brass screws and washerswith 40 mm wide teak

wood frame as per design including polishing

1.12 For supply,installation,testing & commissioning of sanitary fixtures as per Sqm 24 2488.444838 59722.67612

NS Providing & fixing Hand Shower (Health Faucet) with 8mm dia, 1M long

PVC tube and wall hook CP brass wall flange

1.13 For supply of sanitary fixtures as per above details Each 20 1730.531023 34610.62045

Digitally signed by SANJAY

NS Providing & fixing, testing and commissioning of storage type electric

water heater with automatic thermostatic control electric element,

pressure release valve, brackets fixed to expansion fasteners with M.S.

nuts and bolts all complete including cutting and making good the walls

wherever required.

25 litres capacity (Horizontal /Vertical type1.5 kw electrical load).

1.14 For supply,installation,testing & commissioning of sanitary fixtures as per Each 1 19015.44442 19015.44442

NS Providing & fixing wall mounted 25 mm dia Stainless steel coated grab

bar including cutting & making good the walls(size 450mm long)

1.15 For supply,installation,testing & commissioning of sanitary fixtures as per Each 4 1017.058332 4068.233327

NS Providing & fixing 15 mm dia C.P. brass bib cock with Hose union of

approved quality.

1.16 For supply,installation,testing & commissioning of sanitary fixtures as per Each 20 1376.238747 27524.77494

NS Providing & fixing 15 mm dia C.P. brass bib cock with C.P. wall flange of

approved quality.

1.17 For supply,installation,testing & commissioning of sanitary fixtures as per Each 20 1556.247971 31124.95942

NS FRAGRANCE DISPENSER MACHINE :-Providing and fixing of

Fragrance Dispenser machine complete with refill can and 'C' size battery

(2 Nos) for operation fixed to wooden cleats with CP brass screws

1.18 For supply,installation,testing & commissioning of sanitary fixtures as per Each 10 4535.83645 45358.3645

NS 1 Providing and fixing of stainless steel finish Paper Towel Dispenser

having capacity of 300-350 paper towels fixed to wooden cleats with C.P.

Digitally signed by SANJAY

2.00 For supply,installation,testing & commissioning of sanitary fixtures as per Each 15 5501.394573 82520.9186

17.35 3 Providing and fixing soil, waste and vent pipes :

17.35.1.2 5 Centrifugally cast (spun) iron socketed pipe as per IS:3989 Metre 12 1077.4 12928.8

17.35.2 6.00 75mm diameter

17.35.2.2 7 Centrifugally cast (spun) iron socketed pipe as per IS:3989 Metre 4 1042.1 4168.4

17.38.1.2 10.00 Sand cast iron S&S as per IS - 3989 Each 4 597.6 2390.4

17.38.2.2 12 Sand cast iron S&S as per IS - 3989 Each 2 453.4 906.8

17.39 13 Providing and fixing plain bend of required degree:

17.39.1.2 15 Sand cast iron S&S as per IS - 3989 Each 4 439.75 1759

17.39.2.2 17 Sand cast iron S&S as per IS - 3989 Each 2 298.2 596.4

17.55 18.00 Providing and fixing door piece, insertion rubber washer 3mm thick, bolts

and nuts complete:

17.55.1.2 20 Sand cast iron S&S as per IS - 3989 Each 2 611 1222

17.55.2.2 22.00 Sand cast iron S&S as per IS - 3989 Each 2 453.4 906.8

17.56 23 Providing and fixing terminal guard

17.56.1.2 25 Sand cast iron S&S as per IS - 3989 Each 2 439.75 879.5

17.56.2.2 27 Sand cast iron S&S as per IS - 3989 Each 2 311.55 623.1

17.57 28 Providing and fixing collar :

17.57.1.2 30.00 Sand cast iron S&S as per IS - 3989 Each 2 439.75 879.5

17.57.2.2 32 Sand cast iron S&S as per IS - 3989 Each 2 271.45 542.9

17.58 33 Providing lead caulked joints to sand cast iron/centrifugally cast (spun)

iron pipes and fittings of diameter

Digitally signed by SANJAY

NS 36 Providing and laying cement concrete 1:2:4 mix (1 cement : 2 coarse -

sand : 4 sand aggregate 20mm down grade) 75mm in bed alround C.I.

soil and waste pipe. -

37 100mm and 75mm dia under floor including shuttering and centering Metre 36 285.00 10,260.00

NS 38.00 Providing and fixing 100mm dia G.I. Inlet fitting of standard design and as 2,300.00

shown in drawing with two-three inlets, suitable for 32mm to 50mm G.I.

Pipes and 75mm to 100mm outlet. Each 2 1,150.00

WATER SUPPLY - -

18.10 1.0 Providing and fixing G.I. pipes complete with G.I. fittings and clamps

including cutting and making good the walls etc. - -

Internal work - Exposed on Wall - -

18.10.4 (d) 32mm dia. nominal bore Metre 30 563.60 16,908.00

18.8 2.0 Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having

thermal stability for hot and cold water supply including all CPVC plain &

brass threaded fittings I/c fixing the pipe with clamps at 1.00m spacing.

This includes jointing of pipes and fittings with one step CPVC solvent

cement and the cost of cutting chases and making good the same

including testing of joints complete as per direction of Engineer in

Concealed work including cutting chases and making good the wall etc. -

18.8.1 (a) 15mm nominal outer dia. Pipes Metre 6 441.15 2,646.90

18.8.2 (b) 20mm nominal outer dia. Pipes Metre 5 513.75 2,568.75

18.8.3 (c) 25mm nominal outer dia. Pipes Metre 10 626.05 6,260.50

18.8.4 (d) 32mm nominal outer dia. Pipes Metre 15 712.75 10,691.25

18.17 3.0 Providing and fixing gun metal gate valve with C.I. wheel of approved

quality (screwed end) : - -

18.17.2 (b) 32mm nominal bore Each 1 589.90 589.90

Digitally signed by SANJAY

18.32 4.0 Constructing masonry chamber 30 x 30 x 50 cm, inside with 75 class

designation brick work in cement mortar 1:4 (1 cement : 4 coarse sand)

for stop cock, with C.I. Surface box 100 x 100 x 75mm (inside) with

hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2

coarse sand : 4 graded stone aggregate 20mm nominal size) necessary

excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10

graded stone aggregate 40mm nominal size) and inside plastering with

cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a

floating coat of neat cement complete as per standard design.

18.32.1 With common burnt clay F.P.S.(non modular) bricks of class designation

18.38 5.0 Painting G.I. pipes and fittings with synthetic enamel white paint over a

ready mixed priming coat, both of approved quality for new work : - -

18.38.4 32mm diameter pipe Metre 30 30.70 921.00

19.7 1 Constructing brick masonry manhole in cement mortar 1:4 (1 cement: 4

coarse sand), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand :

4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8

mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal

size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3

coarse sand) finished with floating coat of neat cement and making

channels in cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded

stone aggregate 20mm nominal size) finished with a floating coat of neat

cement complete as per standard design.

19.7.1 Inside size 90cm x 80cm and 45cm deep including C.I. cover with frame

(light duty) 455 x 610mm internal dimensions total weight of cover and

frame to be not less than 38 kg. (weight of cover 23 kg. and weight of

frame 15 kg.) : - -

19.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation

Digitally signed by SANJAY

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC

1 1.10 conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5

sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point (without independent

switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in

2 1.55 surface / recessed PVC conduit, and earthing the point with 1.5 sq.mm. FRLS PVC insulated

copper conductor single core cable etc as required.

Wiring for light/ power plug with 2x4 sq mm FRLS PVC insulated copper conductor single core

3 1.12 cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC Metre 400 334.00 133600.00

insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4x4 sq mm FRLS PVC insulated copper conductor single core

4 1.13 cable in surface/ recessed medium class PVC conduit alongwith 2 Nos 4 sq. mm FRLS PVC Metre 50 537.00 26850.00

insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

5 1.24 box including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 540 122.00 65880.00

1.24.5 6 pin 15/16 amp socket outlet Each 40 197.00 7880.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box

6 1.26 excluding modular plate as required. Each 100 40.00 4000.00

Supplying and fixing following size/module, GI box along with Modular base & cover plate on

7 1.27 existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC

1 1.14 insulated copper conductor, single core cable in surface/ recessed steel conduit as required

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Digitally signed by SANJAY

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 3000 334.00 1002000.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 350 439.00 153650.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 50 1005.00 50250.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 100 1365.00 136500.00

Supplying and making end termination with brass compression gland and aluminium lugs for

1 9.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1

KV grade as required.

Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium

2 MR Conductor Cables :

Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor

armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively &

(a) 3.5 C x 120 Sqmm XLPE cable Metre 10 705.00 7050.00

(b) 3.5 C x 95 Sqmm XLPE cable Metre 100 604.00 60400.00

(c ) 3.5 C x 70 Sqmm XLPE cable Metre 100 504.00 50400.00

(d) 3.5 C x 50 Sqmm XLPE cable Metre 10 403.00 4030.00

(e) 3.5 C x 35 Sqmm XLPE cable Metre 10 345.00 3450.00

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit

2 2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual

2.15 current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Digitally signed by SANJAY

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

Supplying and fixing following way, vertical type three pole and neutral, sheet steel, MCB

distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral

3 2.5 bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as

required. (But without MCB/RCCB/Isolator)

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,

4 2.14 residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in

the existing MCB DB complete with connections, testing and commissioning etc. as required.

SITC of Infrared passive technology based occupancy sensor having high performance non

5 15.1 regulating programmable type, suitable for connected load upto 10 A for mounting height upto Each 10 4602.00 46020.00

2.8 m and for 5 diametre coverage along with necessary arrangement complete in all respect

E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

Supply, installation, testing & Commissioning of 1 module 16A SWITCH SP 1 way for floor

2 MR Supply, Installation, Testing and Commissioning of USB port Socket in single module Each 200 718.11 143622.03

3 MR Supply, installation, testing & Commissioning of 2 module 16 A Socket for floor box box. Set 20 371.29 7425.75

Supplying and fixing following modular switch / socket on the existing modular plate & switch

4 1.24 box including connections but excluding modular plate etc. as required.

1.24.7 TV socket outlet Set 30 148.00 4440.00

1.24.6 Telephone Socket Outlet Set 50 148.00 7400.00

Supplying and drawing following pair, 0.5 sq.mm FR PVC insulated copper conductor,

1.18 unarmoured telephone cable in the existing surface / recessed steel / PVC conduit as

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with

MR required suitable number of GI couplers for joining raceways and fixing GI brackets and all

accessories complete in all respect as per the directions of engineer in charge

(a) 300mmx38mm(GI) - 3 compartment Metre 100 1279.38 127937.96

E.18 (b) 225mmx38mm(GI) - 3 compartment Metre 150 1027.52 154128.06

Digitally signed by SANJAY

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables

at the intersection of raceways supplied completely with base and cover plates, height

MR adjustable junction box 65- 90 mm including all accessories complete in all respect as per the

directions of engineer in charge

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

7 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the exisitng Set 2000 47.00 94000.00

surface/recessed steel/ PVC conduit as required

Supplying and fixing of following sizes medium class PVC conduit aong with accessories in

1.21 surface/ recess including cutting the wall and making good the same incase of recessed

8 conduit as required

Supplying and Installation of following size perforated of painting with powder coating M.S.

cable trays of perforation of not more than 17.5% in convinient sections, joined with

4.1 connectors suspended from the cieleing with MS suspenders including bolts and nuts painting

suspenders etc as required

4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 200 1137.00 227400.00

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and

1 5.6 providing masonry enclosure with cover plate having locking arrangement and watering pipe Set 8 13838.00 110704.00

of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

4 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. Metre 600 70.00 42000.00

5 MR Floor Panels

Digitally signed by SANJAY

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick

CRCA sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors

fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply

with rear access for cable alley and with segregated bus-bar chamber with tinned aluminium

bus bar and including supplying and fixing following switchgears, meters and accessories,

inter-connections, bonding to earth, powder coated painting and marking as specified. Switch

boards complete as per schematic diagram:

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

detailed in the Specifications

Colour: Gray Powder Coated, as per approved sample.

1 nos, 250 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault breaking

capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 320 Amps capacity with heat shrinkable colored

sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section,

size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 63 Amps, TPN, MCB -8 Nos.

(b) 40 Amps, TPN, MCB - 16 nos

Panel complete as above or as per site requirement Each 1 204973.92 204973.92

6 MR Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following

Designing, fabricating, sheet steel unloading,

transporting, cubicle typestoring,

panels fabricated

fixing in from 1.6mmtesting

position, thick and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick

CRCA sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors

fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply

with rear access for cable alley and with segregated bus-bar chamber with tinned aluminium

bus bar and including supplying and fixing following switchgears, meters and accessories,

inter-connections, bonding to earth, powder coated painting and marking as specified. Switch

boards complete as per schematic diagram:

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

detailed in the Specifications

Colour: Gray Powder Coated, as per approved sample.

Digitally signed by SANJAY

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

Three (3) nos, 63 Amps. 4 pole MCB , i.e four pole Moulded Case Circuit Breaker of fault

breaking capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 200 Amps capacity with heat shrinkable colored

sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section,

size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

2 Nos. 100A, 4P, MCCB (25kA) with phase indicating lamp protected with 2A, SP, MCB's

along with E/M interlocking

(a ) 40 Amps, TPN MCB - 6 nos

Panel complete as above or as per site requirement Each 1 180851.51 180851.51

Supply, Installation, Testing and Commissiong of 40 KVA (20 with battery bank+20 with

battery bank) KVATrue Online Double Conversion UPS 3Phase Input - 3Phase Output in

Parallel Redundant N+1 Configuration IGBT Based Rectifier and IGBT Based Inverter

Batteries:12 V, SMF Amararaja/Exide with minimum VAH capacity of 15600 suitable for 30

minutes backup with each ups Along with Accessories Rack, Interlinks, SFU, Parallel Kit, DC

MR Cable Upto 5 Meters complete in all respect as per the directions of the engineer in charge. KVA 40 25415.50 1016620.00

UPS should have availability of Input /Output isolator, Inbuilt manual bypass along with phase

sequence corrector. UPS Efficiency shall not be less than 94% from 25% to 100% Load ,

isolation etc Power factor should be more than 0.9. Overall breakup/ intergration of 200 KVA

shall be decided by EIC/client within the quoted cost

1.50.1 Installation of exhaust fan in the existing opening, including making good the damage,

connection, testing, commissioning etc. as required. Upto 450mm sweep

Supply of Ceiling Suspended light fixture suitable for 1 No 18/20 Watt LED Tube complete

with suitable Electronic Ballast, Lamp etc. as required. Each 40 387.00 15,480.00

Supply of circular surface mounted LED downlight fixture suitable for 6 Watt LED Complete

10 MR with suitable Electronic Ballast, Lamp etc. as required. Each 25 487.00 12,175.00

Supply of circular Recess LED downlight fixture suitable for 6 Watt LED Complete with

11 MR suitable Electronic Ballast, Lamp etc. as required. Each 30 363.00 10,890.00

Supply of circular Recess LED downlight fixture suitable for 12 Watt LED Complete with

12 MR suitable Electronic Ballast, Lamp etc. as required. Each 30 610.00 18,300.00

Supply of 2"X2" Square recessed LED downlight fixture suitable for 36 Watt LED Complete

13 MR with suitable Electronic Ballast, Lamp etc. as required. Each 40 2,319.00 92,760.00

Supply of wall mirror light fixture suitable for 1 No 9-10 Watt LED Complete with suitable

14 MR Electronic Ballast, Lamp etc. as required. Each 24 330.00 7,920.00

Digitally signed by SANJAY

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

Supply of Spot light of 3W of desired colour & scheme

Supply of Bulk Head light fixture suitable for 1 No 10 Watt LED Complete with suitable

16 MR Electronic Ballast, Lamp etc. as required. Each 12 1,343.00 - 16,116.00

Supply, Installation, Testing and Commissioing of LED Recess luminaire with LED(Light

Emitting Diode) maximum system power: 28W, 120 LM/W system efficacy, colour

temperature of 4000K, neutral white, 230V constant current driver, 70% of luminous flux after

50,000 operating hours, energy efficient LEDs, CRI>80, R9>0, minimum luminous flux of

3360 lm, MacAdam 3, T.H.D≤5%, driver efficiency ≥ 88%, surge protection of 2.5kV, direct

17 MR light emission, Aluminium extrusion body, polyester white powder coat applied over a 5-stage 100 3367.49

pre-treatment, Triangular Prismatic diffuser for glare-free uniform light, UGR<16, Electronic

control gear or euivalent as per site requirement Protection class I, IP40, L =1195mm, B =

Supply, Installation, Testing and Commissioing of Recessed round downlightwith HPE (High-

Performance Efficiency) with LED (Light Emitting Diode), maximum system power: 15 W,

minimum Luminous flux of luminaire 1500 lm, 100 LM/W system efficacy, Colour temperature

of 4000 K, Neutral white, CRI > 80, MacAdam 3, T.H.D≤5%, R9>0, driver efficiency ≥ 88%,

surge protection of 2.5kV 230V constant current driver, 70% of luminous flux after 50,000

18 MR operating hours; energy-efficient LEDs, direct light emission, housing in die-cast aluminium, 300 1023.71

Polyester powder white coloured coat applied over a 5-stage pre-treatment trim, prismatic

diffuser for homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE) wiring,

Electronic control gear or euivalent as per site requirement Protection class II, IP 40, Ø = 175

Pendant luminaire with LED (Light Emitting Diode), maximum system power 28 W, minimum

luminous flux of luminaire 1600 lm, 100 Lm/w, , CRI>80, R9>0, THD<5%, P.F>0.95, Driver

Efficiency>88%, SDCM<3, colour temperature of 4000 K, Neutral white, 230V constant

current driver, 70% of luminous flux after 50,000 operating hours, energy-efficient LEDs,

luminaire profile in aluminium, Plastic moulded end caps, Polyester powder

19 MR Aluminium white coloured coat applied over a 5- stage pre-treatment, Deep recessed high- 50 4162.68

efficiency glare-free snap-fit micro-prismatic diffuser for homogeneous light distribution,

UGR<19, ZHLS (Zero Halogen Low Smoke) internal wiring, integral electronic control

gear, adjustable suspender, Protection class I, IP20, L = 1199 mm, B = 75 mm, H = 90 mm,

PL max = 1500 mm.or euivalent as per site requirement

Total of Electrical items 11154288.41

Digitally signed by SANJAY

SCHEDULE OF QUANTITIES - HVAC WORKS

S NO DSR (E & M-

DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supply and Installation of pressure independent rectangular VAV unit with

integral sound attenuator made of 22G GI sheet casing length 900mm

1.0 M.R. consisting of 25mm thick 48kg/m3 density fiber glass wool covered with tissue

paper ,elliptical volume control damper , calibrated differential pressure sensor

Upto 500 CFM at inlet complete with digital Thermostat.(All VAV shall be

Supply, installation, testing and commissioning of Variable Frequency Drive

or asChassis, RFI

directed by theclass A1 (C2),

engineer No brake chopper.

DUCT PRESSURE SENSORS

Supply, Installation and Testing of pressure sensors to be installed in

3.0 MR supply air ducts. Quoted price shall be inclusive of necessary conduting, Nos. 4.0 17500.00 70000.00

copper control cabling from the sensors to the respective VFDs as per

"Approved Shop Drawings".

Supply, Installation, Testing & Commissioning of Silent type circular

/rectangular inline fans for exhaust air complete with sheet metal casing,

25mm thick acoustic insulation, direct driven centrifugal fan, motor with proper

protection and inspection door. Fan shall be suitable for operation on 220+6

% volts, 50 Hz,1 phase AC power supply. Flanges to be provided on both

4.0 M.R. sides to facilitate duct connections. Fan shall be installed as shown in the

drawings and will be of following characteristics :

All single phase inline fans shall be provided with factory fitted speed

regulators. All Fans Should be complete with Plug Top & necessary power

Fans shall have low noise level in rage of 35-40dBA @3m and shall be

a M.R. 200 CFM S.P of 13-14 for Toilet Nos. 8.0 6450.00 51600.00

5.0 M.R. Tube Axial Fan

Digitally signed by SANJAY

Supply Installation, testing and commissioning of supply air Tube Axial flow

fan of following capacity with GSS casing and aluminium alloy impellers with

a M.R. high efficiency aero-foil sections, blades, the impeller directly driven by TEFC NOS 4.0 96750.00 387000.00

induction motor suitable for 3 Phase 50 Hz 415 V ± 10%, complete as

required. This cost shall include the cost for suitable panel, DOL starter,Panel

,breakers etc compete in all respect as per the directions of engineer in

M.R. 9000 cfm at 15 mm static presuure for fresh air/exhaust air With Class "H"

Digitally signed by SANJAY

Supplying, Fixing,testing and commissioning of fire dampers in supply air

duct/main branch and return air path as and where required of required sizes

i/c control wiring,the damper shall be motorized and spring return so as to

close the damper in the event of power failure automatically and open the

same in case of power being restored. The spring return action shall be inbuilt

6.0 16.20 mechanism and not externally mounted. The damper shall also be closed in

the event of fire signal complete as required and as per specifications.

(Fire damper shall ve suitable for 120 minutes fore rating as per NBC norms)

7.0 GI Gravity Louver

Supply, installation, testing and commissioning of GI Gravity Louver complete

a M.R. with neoperene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as SQM 2.0 6600.00 13200.00

per specifications.

8.0 VOLUME CONTROL DAMPER

Supply, installation, testing and commissioning of GI volume control duct

a 16.13 damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, SQM 15.0 7046.00 105690.00

flanges etc, as per specifications

Supply, installation, balancing and commissioning of factory fabricated GSS

sheet metal rectangular/round ducting complete with neoprene rubber gaskets,

16.12.1 elbows, splitter dampers, vanes, hangers, supports etc. as per approved

drawings and specifications of following sheet thickness complete as required.

Diffusers & Grills

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with

aluminium volume control dampers as per specifications.

Supplying & fixing of powder coated extruded aluminium Return Air Grills with

louvers but without volume control dampers complete as required

Digitally signed by SANJAY

Supplying, fixing testing commissioning of supply air diffusers of powder

12.0 16.17 coated aluminium with aluminium volume control dampers with anti smudge SQM 6.0 12184.00 73104.00

ring & removable core.

Supplying, fixing testing commissioning of Return air diffusers of powder

coated aluminium without volume control dampers with anti smudge ring &

removable core.

Supply, Installation, Testing of 125mm deep antivibration flexible joints at the

outlet of air handling units/ductable split units//inline fans. Flexible connections

14.0 MR shall be constructed using imported fire retardant fabric with extruded RM 30.0 1440.00 43200.00

aluminium frame/flange on both sides of approved make.

Supply, Installation and Testing of Bird Screens with GI wire mesh to be

installed at the suction of fresh air/discharge of Exhaust air as per the

15.0 MR specifications and shop drawings. Sample of bird screen to be got approved SQM 4.0 2850.00 11400.00

from consultants and Clients prior to procurement.

Digitally signed by SANJAY

Supplying and fixing of following thickness duly laminated aluminum foil of mat

finish closed cell Nitrile rubber (Class "O") insulation on existing duct after

16.0 16.23 applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50

mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete

as per specifications and as required.

Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm

thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25

mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with

17.0 16.21 Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet SQM 60.0 708.00 42480.00

fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins,

CPRX compound etc. complete as required and as per specifications

Supplying, laying/ fixing, testing and commissioning of following nominal sizes

of chilled water piping inside the building (with necessary clamps, vibration

isolators and fittings but excluding valves, strainers, gauges etc.) duly

insulated with following closed cell elastometric nitrile rubber of minimum 45

Kg / cu m density, thermal conductivity 0.037 W/MK or better at 20 deg mean

temperature class 'O' insulation applied by suitable adhesive complete

including repairing of damage to building etc. as per specifications and as

required complete in all respect. Note:- The Pipes of sizes 150mm & below

shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be

welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm

thick M.S. Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS

sheet for pipes of 400 mm dia and above.

16.2.10 65mm dia(32 mm thick insulation) Metre 30.0 1794.00 53820.00

16.2.11 50mm dia(32 mm thick insulation) Metre 50.0 1553.00 77650.00

16.2.12 40mm dia. (32 mm thick insulation) Metre 70.0 1257.00 87990.00

16.2.13 32 mm dia(19 mm thick insulation) Metre 100.0 1047.00 104700.00

16.2.14 25 mm dia(19 mm thick insulation) Metre 100.0 869.00 86900.00

Digitally signed by SANJAY

Supply Installation, Testing & Commissioning of modular type Variable Per HP 10.0 16415.00 164150.00

Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable

for cooling and heating, having all hermetically sealed inverter type Scroll

Compressor(s), minimum two compressors for above 14 HP modules,

microprocessor based Controller, top discharge type condensing unit(s), with

R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete

1 as required. The unit shall deliver the rated capacity at AHRI Conditions and

work even at 50°C ambient temperature without tripping. The unit shall be

suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit

shall be filled with first charge of the refrigerant and ready for use as required.

The COP at AHRI conditions shall not be less than 3.1 and IEER not less than

Supply, installation, testing and commissioning of following minimum capacity

4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with

synthetic washable media pre-filter, fan section with low noise fan/dynamically

balanced blower, multispeed motor, coil section with DX Copper coil, electronic

expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration

isolation, cord less remote control etc., suitable for operation on single phase

230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have

automatic force shut down provision in case of fire on receiving signal from

BMS System. The cooling capacity of indoor unit will be at air inlet conditions

of 27 Degree C DB and 19 Degree C WB temperature.

Supply, installation, testing and commissioning of following

minimum capacity VRV/VRF High wall type Indoor unit equipped

3 with washable synthetic media pre-filter, fan section with low noise

fan/dynamically balanced blower, multispeed motor, coil section

with DX copper coil, electronic expansion valve, outer cabinet, cord

less remote control, drain pan, necessary accessories etc., suitable

5 5 Refrigerant Piping

Supply, Installation, testing and commissioning including vaccumiazation and

Nitrogen testing of following nominal sizes of soft/hard drawn copper

refrigerant piping for VRV/VRF system, complete with fittings, with suitable

adjustable ring type hanger supports, jointing/brazing including accessories,

insulated with XPLE Class-O tubular insulation/with Class-O closed cell

elastometric nitrile rubber tubular sleeves sections of specified thickness as

given below for Suction and Liquid lines, all accessories as per specifications

a 5.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick Metre 60 245 14700

b 5.2 insulation

9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick Metre 100 331 33100

5.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick Metre 60 466 27960

5.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick Metre 100 588 58800

Digitally signed by SANJAY

e 5.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick Metre 100 707 70700

5.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick Metre 100 865 86500

5.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick Metre 20 1022 20440

5.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick Metre 20 1108 22160

insulation and supplying 2 ton inverter AC of split including outdoor and indoor,

Providing Each 3.0 62000.00 186000.00

i MR piping etc., complete in all respect (Min 4 star and above as per direction of

Lifting, Shifting, Supply, Installation, Testing & Commissioning of

Interconnecting "Y" & "T" Joints i.e. Refnet Joints/ Header with Insulation for

j MR refrigearnt piping

TOTAL HVAC WORKS 6283262.0 2429906.0

Digitally signed by SANJAY

S NO Description UOM Qty Rate DSR Amount Non-DSR Amount

A. UTP Components for Data & voice

1. Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for

(DSR Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250 METRE 20000 57.00 1140000.00

1.53.1) MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply, Installation, Testing and Comissioning of I/O port for CAT6 cable termination

2 at Work Station end. Keystone Unshielded Outlet, 180DG C6, Blue Nos. 536 450.00 241200.00

Supply, Installation, Testing and Comissioning of I/O port for CAT6 cable termination

3 at Work Station end Redantant . Keystone Unshielded Outlet, 180DG C6, Yellow Nos. 536 450.00 241200.00

Supply , Installation , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet)

4 for information outlet (I/O) to end user device connectivity.High Speed Gigabit Nos. 268 400.00 107200.00

24AWG U/UTP Patch Cord Blue, LSZH, C6, 2M

Supply, Installation, Testing and Comissioning of CAT6 patch cord 1 Mtr (3 feet) for

5 information outlet (I/O) to Rack End Redantant device connectivity. High Speed Nos. 268 285.00 76380.00

Gigabit 24AWG U/UTP Patch Cord Yellow, LSZH, C6, 2M (Yellow)

Supply, Installation, Testing and Comissioning of 24 port Loaded Jack Panel for

6 CAT6 cable termination at rack end. Data Active Nos. 24 4800.00 115200.00

Supply , Installtion , Testing and Comissioning of 24 port Loaded Jack Panel for

7 CAT6 cable termination at rack end. Data Active Redandant Nos. 24 4800.00 115200.00

C. 200 Pair MDF Box

8 200 Pair MDF Box with mounting Frame Nos. 2 13020.00 26040.00

9 10 Pair Krone Module Nos. 8 900.00 7200.00

10 25 Pair Riser Cable Mtr. 200 1253.00 250600.00

Total : C - MDF Box

D UTP Components for Wifi

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for

11 Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250 RM 2000 57 114000.00

MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

12 termination at Work Station end. Keystone Unshielded Outlet, 180DG C6, White Nos. 10 450.00 4500.00

Supply , Installtion , Testing and Comissioning of 24 port loaded Angled Staggred

13 Jack Panel for CAT6 cable termination at rack end. Voice Active Nos. 1.00 4800.00 4800.00

Supply , Installtion , Testing and Comissioning of Single Port British Style Shuttered

14 Face Plate white for I/O fixing at user side Nos. 10 156.00 1560.00

Digitally signed by SANJAY

S NO Description UOM Qty Rate DSR Amount Non-DSR Amount

Supply, installation, testing & commissioning of Dual-band 802.11abgn/ac Wireless Each

Access Point ,4X4: • 2.4 GHz - Up to 800 Mbps 5 GHz - Up to 1733 Mbps , dual

ports ,802.3af PoE support.Supports enhanced security – WPA2-Personal & WPA2-

15 Enterprise, WPA3 . Supports two 10/100/1000 Ethernet ports. Support LACP or 10 28000.00 280000.00

Static Link Aggregation Does not include power adapter or PoE injector. Should

Includes Warranty and Mounting Kit complet in all respect. complet in all respect.with

3 years Support/warranty

E UTP Components for CCTV & Access Control

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for

16 Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250 RM 1500 57 85500.00

MHz, Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable

17 termination at Work Station end. Keystone Unshielded Outlet, 180DG C6, White Nos. 16 450.00 7200.00

Supply , Installtion , Testing and Comissioning of 24 port loaded Angled Staggred

18 Jack Panel for CAT6 cable termination at rack end. Voice Active Nos. 1.00 4800.00 4800.00

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 1 Mtr (3 feet) for

19 information outlet (I/O) to end user device connectivity. (Field End), High Speed Nos. 32.00 285.00 9120.00

Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M

Supply , Installtion , Testing and Comissioning of Single Port British Style Shuttered

20 Face Plate white for I/O fixing at user side Nos. 16 156.00 2496.00

Supply instllation testing and commissioning of Access Switch of 48 port PoE+,

21 4x10G, Network essentials, DNA essentials Nos. 2 235000.00 470000.00

SITC of IP Vari Focal Dome IR Camera with mounting brackets: 1/2.8" Image

Sensor; Resolution: 1920X1080; Lens: Fixed Focal; f:2.8 to 12 mm; Iris: Fixed;

Colour:0.1 [email protected] B/W:0 lux (IR LED ON); Day/Night; WDR;Privacy Masking : 8

Zone ; Video Intelligence:Tampering VMD, & Trip Zone; IR Distance: 30 Mtr; Shutter

22 Speed : 1/30 ~ 1/10000 sec or higher ONVIF S, Protocols : RTP/RTSP/TCP, No's 12 12,500.00 150,000.00

RTP/RTSP/HTTP/TCP, RTP/UDP RTSP/TCP, HTTP, HTTPS, FTP, SNTP, SMTP,

Controlled Backlight compensation; Connectivity:RJ45(10/100 BASE-T); POE; Video

Streaming: Four;Edge Storage 256 GB : Multiple Option; Protection: IP 67; IK10,

Operating Temperature: -20 degree C - +55 degree C;Operating Humidity: 0% -90%.

Supply, Installation, Testing and Commissioning of 48Ch Embedded Network Video

23 Recorder with 4 Sata Supports 1 × RJ45 1000M ,4K Cameras, HDMI, VGA, RAID, No's 1 215,000.53 215,000.53

Redundant power supply, Smart Analytics and ONVIF

SITC of SSD Hard Disk Drive 8TB, 24/7 surveillance category Only complete etc as

24 required.etc.all complete. 2 34500.08 69,000.17

GRAND TOTAL (A+B+C+D+E) 1339500.00 2398696.69

GRAND TOTAL (A+B+C+D+E) 1339500.00 2398696.69

Digitally signed by SANJAY

SCHEDULE OF QUANTITIES - FIRE ALARM

DSR NO S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

DSR NO S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

Supplying, installation, testing & commissioning of intelligent analog addressable

17.2.4 1 photothermal detector complete with mounting base complete as required. No 160 2858.00 457280.00

Supplying, installation, testing & commissioning of response indicator on surface/recessed

MS Box having two LED, metallic cover complete with all connections etc as required.

Supplying, installation, testing & commissioning of intelligent addressable thermal detector

with rate of rise cum fixed tempreature thermistor complete with base as required.

Supplying, installation, testing & commissioning of fault isolator complete with base as

Supplying, installation, testing & commissioning of addressable fire control module complete

Supplying, installation, testing & commissioning of addressable phone control module

17.2.11 6 complete as required. No 4 3267.00 13068.00

Supplying, installation, testing & commissioning of intelligent addressable duct detector

17.2.13 7 including suitable Photo detector complete with base as required. No 4 7814.00 31256.00

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as

Supplying, installation, testing & commissioning of addressable manual call point complete as

Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB,

17.3.1 10 MP3 player (including 6 zone button paging station) with seamless integration facility with No 1 126411.00 126411.00

main fire alarm panel for voice evacuation complete as required

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as

Supplying, installation, testing & commissioning of digital audio amplifier 150 Watt, 25V rms

MR 12 operating at 240 Volt AC Supply complete as required. NOS 2 74598.00 149196.00

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed

17.5.2 13 copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath Mtr. 2000 173.00 346000.00

complete as required

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the

17.5.3 14 existing surface / recessed steel conduit of following pairs, cores and size including

connections and interconnections etc. as required.

speaker cable Two pair, 2-core, 1.5 sqmm

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries

17.5.4 16 and accessories like coupler etc. as required. Metre 1000 53.00 53000.00

Supplying & Fixing of battery operated illiminated "EXIT" signage, with 2hrs power Battery

M.R. 17 backup complete as required. NOS 16 3870.00 61920.00

Digitally signed by SANJAY

DSR NO S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

DSR NO S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with

17.3.9 18 microphone assembly complete as required. NOS 1 81756.00 81756.00

Supply, Installation, Testing and Commisioning of Loop Card capacity of 159 detectors For

BMS Fire integration compatible with existing system

Supply, Installation, Testing and Commisioning of Interface Card for BMS fire integration

compatible with exisiting system

Supply, Installation, Testing and Commisioning of repeater panel having 640 character liquid

crystal with backlit control compatible with existing system

TOTAL FIRE ALARM WORKS 1509591.00 686416.00

Digitally signed by SANJAY

Fire fighting and piping work

2022/ DESCRIPTION OF ITEM UNIT QTY RATES NDSR Amount

NO. AMOUNT(RS.)

7 1.1 Providing, laying, testing & commissioning of 'C' class heavy

duty MS pipe conforming to IS 3589/IS 1239 including

Welding, fittings like elbows, tees, flanges, tapers, nuts bolts,

gaskets etc. and fixing the pipe on the wall/ceiling with

suitable clamp/support frame and painting with two or more

coats of synthetic enamel paint of required shade complete

12 1.2 Supplying, fixing, testing & commissioning of double flanged

sluice valve of rating PN 1.6 with non rising spindle,

bronze/gun metal seat, ISI marked complete with nuts, bolts,

washers, gaskets and conforming to IS 780 of following sizes

as required : - -

NS 1.3 Providing, installation, testing and commissioning of gun

metal valves of following sizes as required : - -

21 1.4 Providing, fixing, testing & commissioning of 15mm dia

quartzoid bulb type sprinklers of rating 68 degree centigrade

with required accessories : - -

21.1 1.4.1 Pendent Sprinkler/Upright Sprinkler Each 400 522.00 208,800.00

21.2 1.4.2 Horizontal side wall sprinkler Each 40 522.00 20,880.00

21.3 1.4.3 Concealed sprinkler Each 40 1,435.00 57,400.00

Digitally signed by SANJAY

2022/ DESCRIPTION OF ITEM UNIT QTY RATES NDSR Amount

NO. AMOUNT(RS.)

24 1.5 Providing, fixing, testing & commissioning of installation

control valve of cast iron body, brass/bronze working parts

comprising of water motor alarm, bronze seat clapper,

clapper arm and hydraulically driven mechanical gong bell to

sound continuous alarm when the wet riser/sprinkler system

activates, pressure gauges, emergency releases, strainer,

pressure switch, cock valve complete with drain valve and

bypass, test control box, ball valves, MS pipe of required

size, flanges, orifice plate, gasket etc of follwing sizes as

23 1.6 Providing & fixing flow switch in following sizes M.S. pipe

including connection etc as required. - -

16.11.1 1.7 BUTTERFLY VALVE (MANUAL) with C I body SS disc nitrile

sheet & O - ring & PN 16 pressure rating as specified.

2 Providing and fixing ISI Marked of approved make Fire

Extinguishers complete with all accessories as per

manufacturer's specifications.

MR a) CO2 gas nozzle type - 4.5 Litre capacity (IS:15683). Each 16 12,911.83 206,589.20

MR b) Mechanical Foam gas cartridge type. 9 Kg capacity 46,904.40

MR c) ABC dry powder stored pressure type 6 kg capacity 75,938.00

Digitally signed by SANJAY

2022/ DESCRIPTION OF ITEM UNIT QTY RATES NDSR Amount

NO. AMOUNT(RS.)

18.17 3 Supplying and fixing first-aid Hose Reel with MS

construction spray painted in post office red,

conforming to IS 884 complete with the following as

20 mm nominal internal dia water hose thermoplastic

(Textile reinforced) type -2 as per IS: 12585

20 mm nominal internal dia gun metal globe valve &

Drum and brackets for fixing the equipmets on wall.

Connections from riser with 25 mm dia stop gun metal

valve & M.S. Pipe and socket

18.16 4 Supplying and fixing 63 mm dia, 15 m long RRL hose

pipe with 63 mm dia male and female couplings duly

bound with GI wire, rivets etc. conforming to IS 636

(type-A) as required :

GRAND TOTAL 4,233,313.60

GRAND TOTAL 4,233,313.60

Digitally signed by SANJAY

Schedule of Quantities: AV System

S No Item Description UoM Qty Rate NDSR Amount

SITC of Screen Size 98" Interactive display Pixel Pitch 0.429 x 0.429 mm,

Resolution 3840 (H) x 2160 (V) 4K, Brightness ≤500 Nits, Contrast Ratio ≦4000,

Viewing angle 178°,178°, Response time 5ms, Display color 8 bit/16.7 Million,

Backlight DLED,Speakers 2*15W

SITC of 75" Professional Ultra HD Display Panel, 4K UHD (3840x2160)

Resolution, Brightness 400 Nits, Dynamic Contrast Ratio: 500000:1, Viewing

angle (horizontal / vertical): 178 / 178 degree, Display Colours: 1.07 Billion, Panel

2 technology: IPS / Direct LED, Contrast ratio (typical) 1200:1, Connectivity: Video No's 3 153,742.20 461,226.60

Input: 2 HDMI 2.0, 2 USB 2.0, DVI-I, Audio In, Audio Out, COntrol: RS232,

Ethernet, 2x10W Built-in speakers, CE, FCC, Class A, BIS Certified etc all

SITC of 65" Professional Ultra HD Display Panel, 4K UHD (3840x2160)

Resolution, Brightness 400 Nits, Dynamic Contrast Ratio: 500000:1, Viewing

angle (horizontal / vertical): 178 / 178 degree, Display Colours: 1.07 Billion, Panel

3 technology: IPS / Direct LED, Contrast ratio (typical) 1200:1, Connectivity: Video No's 1 105,698.00 105,698.00

Input: 2 HDMI 2.0, 2 USB 2.0, DVI-I, Audio In, Audio Out, COntrol: RS232,

Ethernet, 2x10W Built-in speakers, CE, FCC, Class A, BIS Certified etc all

SITC of 55" Professional Ultra HD Display Panel, 4K UHD (3840x2160)

Resolution, Brightness 400 Nits, Dynamic Contrast Ratio: 500000:1, Viewing

angle (horizontal / vertical): 178 / 178 degree, Display Colours: 1.07 Billion, Panel

4 technology: IPS / Direct LED, Contrast ratio (typical) 1200:1, Connectivity: Video No's 28 80,074.06 2,242,073.75

Input: 2 HDMI 2.0, 2 USB 2.0, DVI-I, Audio In, Audio Out, COntrol: RS232,

Ethernet, 2x10W Built-in speakers, CE, FCC, Class A, BIS Certified etc all

SITC of Fixed Wall Mount, capable of holding up to 75 kg and supports 37" to 90"

displays, VESA Compliant etc all complete

SITC of Fixed Wall Mount, capable of holding up to 110 kg and supports 75" to

98" displays, VESA Compliant etc all complete

Digitally signed by SANJAY

SITC of External Wireless Presentation & Conferencing device to be interfaced

with one input of a Video Display, Device should be capable of creating its own Wi-

Fi network- user configurable at 2.4 and 5 GHz bands, Device should be able to

display two laptop / desktop / BYOD on video display. The laptops should be able

to display their contents on the screen with the use of a clickable USB button

without any need to interact with organization’s local area network The connected

7 laptops should simultaneously be able to remain connected to internet through No's 4 244,066.00 976,264.00

their own Wi-Fi The device should come bundled with minimum one buttons.

The video transmission should be supported up to 30 fps with synchronized audio

The device should be compatible with Mac, Windows through button and with iOS

& Android BYOD devices through a freely downloadable app The device should

support Airplay & Miracast feature The device should Support USB Peripherals

(Camera, Microphone & Speaker) The device should have HDMI OUT Ports. The

SITC of Cable Cubby with flip top, cover and multi-format cables, 2 Universal

8 Power, 1 HDMI, 1 USB-C, 1 Ehternet Cable, made of steel and aluminium etc all No's 18 19,858.00 357,444.00

SITC of of Wooden Podium one shelf, with Dual Gooseneck Microphone

9 connectivity and LED Light, Power extension, alokng with touch screen to view the No's 1 165,200.00 165,200.00

main screen content with all required accessories etc all complete

SITC of of Digital Podium one shelf, with Dual Gooseneck Microphone

connectivity and LED Light, Power extension, along with touch screen to view the

main screen content with all required accessories etc all complete. Front digital

sinage display as per requirement and as per direction of client

SITC of All in One Conference Unit, Auto-Framing, Plug-and-play USB

connectivity, Built-in Components: 6 Beamforming microphones, PTZ camera,

Speakers, AI Viewfinder, cable management & retention system, table stand etc

SITC of Network PTZ Conference Camera, 12x optical zoom and 60° horizontal

FoV, 1/2.8” low-noise CMOS Sensor, Sensor Scanning Mode: Progressive,

Horizontal Rotation Range: ±170°, Vertical Rotation Range: -30° to +90°, Image

12 rotation for ceiling mounting, White Balance: Auto, indoor, outdoor, one-push, No's 1 314,915.00 314,915.00

manual, specified color temperature, IP Stream Resolutions: H.264 @ 360p, 270p

or 180p, a single network cable for video, power and control data transport, HDMI

2.0 and 3G-SDI Outputs Power Over Ethernet (PoE) support etc all complete

Digitally signed by SANJAY

SITC of HD Visual Communications System, SIP, H.323, 6-Site Connection, Dual

Network, Enabling High-Definition Web Conferences, Video Compression

Method: H.261 (mainstream only), H.263, H.263+, H.263++ (reception only),

H.264 High Profile, H.264 Baseline Profile, Video Input: 2 HDMI, 1 PC, Video

output: 2 HDMI, IP mode, NAT Traversal mode, IP / NAT Traversal mode etc all

SITC of Universal Switcher with HDMI and USB-C connectivity, 1 HDMI Inputs, 1

USB-C connectivity (4K Video, Audio, Data, Power charge), 1 HDMI Outputs, 4

USB-A 3.0 Connection (for USB Devices), 1 USB-B 3.0 Connection (for PC

14 hosts), USB host switching, Analog audio de-embedding, Charging via USB-C up No's 3 272,000.00 816,000.00

to 60w, Supports HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18

Gbps), DP Alt Mode, HDMI 2.0, HDMI 1.x, DVI Signal Support, HDCP 1.x, HDCP

2.2 support etc all complete

SITC of Universal Switcher with HDMI and USB-C connectivity, 2 HDMI Inputs, 2

USB-C connectivity (4K Video, Audio, Data, Power charge), 2 HDMI Outputs, 4

USB-A 3.0 Connection (for USB Devices), 2 USB-B 3.0 Connection (for PC

15 hosts), USB host switching, Analog audio de-embedding, Charging via USB-C up No's 2 288,907.00 577,814.00

to 60w, Supports HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18

Gbps), DP Alt Mode, HDMI 2.0, HDMI 1.x, DVI Signal Support, HDCP 1.x, HDCP

2.2 support etc all complete

SITC of HDMI 2.0 Matrix Switcher, 4HDMI Inputs, 3 Outputs, with breakout Audio,

Occupancy Sensor input and various control features, Supports HDMI 4K signal

16 formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps), HDMI 2.0, HDMI 1.x, DVI No's 3 322,718.00 968,154.00

Complaint, HDCP 1.x, HDCP 2.2 support, GPIO control ports, Device control via

Ethernet (TCP/IP) etc all complete

SITC of 8 Inputs and 8 Outputs HDMI 2.0 Compatible Full 4K Matrix Switcher,

Supports HDMI 4K signal formats (4K UHD @60Hz RGB 4:4:4, up to 18 Gbps),

HDCP 2.2 and HDCP 1.4 compliant with cross conversion capabilities, HDMI 2.0,

HDMI 1.4 and DVI 1.0 compliant, HDR and Low Latency Dolby Vision support,

Audio de-embedding, HDCP 2.2 and HDCP 1.4 compliant, Advanced EDID

Management, Fully non-blocking switching architecture etc all complete

Digitally signed by SANJAY

SITC of HDMI 2.0 Extender (Transmitter) , Supports HDMI 4K signal formats (4K

UHD @60Hz RGB 4:4:4, up to 18 Gbps), Bi-directional PoC remote powering,

18 Extends HDMI 2.0, audio, Ethernet, RS-232 up to 100m over one CATx cable, No's 3 118,190.00 354,570.00

HDR and Low Latency Dolby Vision support, Bi-directional RS-232 extension

(pass-through),HDCP 2.3 compliant (transparent pass-through) etc all complete

SITC of HDMI 2.0 Extender (Reciever) , Supports HDMI 4K signal formats (4K

UHD @60Hz RGB 4:4:4, up to 18 Gbps), Bi-directional PoC remote powering,

19 Extends HDMI 2.0, audio, Ethernet, RS-232 up to 100m over one CATx cable, No's 3 118,190.00 354,570.00

HDR and Low Latency Dolby Vision support, Bi-directional RS-232 extension

(pass-through),HDCP 2.3 compliant (transparent pass-through) etc all complete

SITC of Central Conference Controller with Recording & Web Server, with built-in

Digital Signal Processing, Control upto minimum 50 Discussion Unit and

expandable upto 150 Discussion Unit by configuring multiple Controller Unit, Two

USB Connections to connect USB Storage Device for Direct Recording of the

Meeting, Camera Control Integration Capability, Conference Mode: Direct access,

20 Request, Push to talk, FIFO, Vox control, Selectable Voice Activation, Digital No's 1 323,335.00 323,335.00

Acoustic , Feedback Reduction, With Audio Input & Output for connectivity with

external sysytem like amplifier, microphone & audio/video conference system,

Audio Quality 16Bit digital, With Power Saving Mode allows controller to sleep

state if it has been left ON, CE Certified and should be manufactured (Country of

Origin) in Europe/US etc all complete

SITC of Chairman Discussion Unit with Gooseneck Microphone of minimum

Length 400 mm, built-in Digital Signal Processing, Priority button silences all

delegate microphones and allows only the chairperson to speak, Next-in-line

button gives the floor to the next speaker in a waiting list of speakers who

requested to speak, User Button with Feedback, Shielded microphone, immune to

mobile phone interference, High-quality integrated loudspeaker, Headphone

output with Volume Adjustment, Loop-through, daisy-chain cabling, Different LED

Signalling for Mic On/Off OR Request-to-Speak Push Button, Audio Quality 16Bit

digital, Frequency Response: 30Hz-15kHz, Microphone with 400 mm Gooseneck

Length with , Polar Pattern: Unidirectional, Cardioid, Max SPL @ 1kHz: 110dB

SPL, S/N Ratio: 67dB-A CE Certified and should be manufactured (Country of

Origin) in Europe/US etc all complete

Digitally signed by SANJAY

SITC of Deleagte Discussion Unit with Gooseneck Microphone of minimum

Length 400mm, built-in Digital Signal Processing, Microphone On / Off Button,

Shielded microphone, immune to mobile phone interference, High-quality

integrated loudspeaker, Headphone output with Volume Adjustment, Loop-

through, daisy-chain cabling, Different LED Signalling for Mic On/Off OR Request-

to-Speak Push Button, Audio Quality 16Bit digital, Frequency Response: 30Hz-

15kHz, Microphone with 400 mm Gooseneck Length with , Polar Pattern:

Unidirectional, Cardioid, Max SPL @ 1kHz: 110dB SPL, S/N Ratio: 67dB-A,

Connection: Screw Lock, CE Certified and should be manufactured (Country of

Origin) in Europe/US etc all complete

23 SITC of 2 meter Conference Cable from same OEM etc all complete No's 14 3,986.00 55,804.00

24 SITC of 20 meter Conference Cable from same OEM etc all complete No's 2 17,320.00 34,640.00

SITC of Wireless System with Handheld Transmitter, Supercardioid Dynamic

Microphone capsule , 24-bit digital audio, Extended 20 Hz to 20 kHz frequency

range, 118 dB dynamic range, Digital predictive switching diversity, 44 MHz tuning

bandwidth, 32 available channels per frequency band, Up to 10 compatible

systems per 6MHz TV band; 12 systems per 8 MHz band, RF Carrier Frequency

Range: 470–937.5 MHz, Working Range 100 m (328 ft), Network Interface, RF

Power: 10 mW, Antenna Type: Integrated Single-Band Helical, Up to 8 hours from

2 AA batteries or rechargeable battery etc all complete

SITC of Wireless System with Beltpack Transmitter, Omnidirectional Condenser

Lavalier Microphone , 24-bit digital audio, Extended 20 Hz to 20 kHz frequency

range, 118 dB dynamic range, Digital predictive switching diversity, 44 MHz tuning

bandwidth, 32 available channels per frequency band, Up to 10 compatible

systems per 6MHz TV band; 12 systems per 8 MHz band, RF Carrier Frequency

Range: 470–937.5 MHz, Working Range 100 m (328 ft), Network Interface, RF

Power: 10 mW, Antenna Type: Integrated Single-Band Helical, Up to 8 hours from

2 AA batteries or rechargeable battery etc all complete

SITC of 12" Gooseneck Condenser Microphone, Inline Pre-Amp, Mute Switch,

Light-Ring, Cardioid, Electret Condenser, Frequency Response 70–16000 Hz,

Output Impedance: 180 Ω, Maximum SPL: 120 dB SPL, Dynamic Range: 93 dB

etc all complete

Digitally signed by SANJAY

SITC of Audio, Video and Control (AV&C) Processor, 64 x 64 networked audio

channels, 8x on-board Flex channels and GPIO, Full-featured Control engine

(with feature license), 8 AEC Processors, up to 32 x 32 Dante audio channels (8 x

8 included), USB AV bridging (8 x 8 audio + Camera support), Full-featured Q-

SYS Control engine (with optional feature license), External USB audio device

host, Up to 2x VoIP instances etc all complete

SITC of Fully Integrated Audio, Video and Control Solution, 128 Networked Audio

Channel, 24 Channels of analog I/O, including 8 configurable Flex channels, 16

AEC Processor, Up to 32 x 32 Dante audio channels (8 x 8 included), USB AV

bridging (16 x 16 audio + Camera Support), Full-featured Control engine (with

Feature License), Up to 4x VoIP Instances, External USB audio device host etc all

SITC of 6.5-inch, 2-Way Ceiling Speaker, Rated Power: 60W, Frequency Range:

65 Hz – 20 kHz, Sensitivity: 88 dB, Rated Coverage 135° conical DMT, Maximum

30 continuous SPL 106 dB, Nominal impedance: 8 / 16 Ohm, Transformer taps: 60W No's 12 22,523.23 270,278.79

/ 30W / 15W at 100 / 70V, IP-34 Rated, Low-saturation and low-loss 70/100V

transformers with 16Ω bypass, UL and CE Certified etc all complete

SITC of 4.5-inch, Full Range Ceiling Speaker, Rated Power: 16W, Frequency

Range: 70 Hz – 16 kHz, Sensitivity: 89 dB, Rated Coverage 140° conical,

31 Maximum continuous SPL 101 dB, Nominal impedance: 8 / 16 Ohm, Transformer No's 2 22,166.35 44,332.70

taps: 16W / 8W / 4W at 100 / 70V, 70/100V transformers with 8Ω bypass, UL

Certified etc all complete

SITC of 8 Channel Class-D Amplifier, Power (per channels driven): 200 W at 8 Ω /

4 Ω / 100V / 70V, FlexAmp Technology, Frequency Response: 20 Hz – 20 kHz,

Signal to Noise > 103 dB, Input impedance >10k, balanced or unbalanced, User-

configurable operating modes, UL, CE, RoHS/WEEE compliant etc all complete

SITC of 4 Channel Class-D Amplifier, Power (per channels driven): 200 W at 8 Ω /

4 Ω / 100V / 70V, FlexAmp Technology, Frequency Response: 20 Hz – 20 kHz,

Signal to Noise > 103 dB, Input impedance >10k, balanced or unbalanced, User-

configurable operating modes, UL, CE, RoHS/WEEE compliant etc all complete

SITC of Expension Module for RS232 / Communication Port, Gigabit LAN, Four bi-

34 directional RS232 serial ports, Power over Ethernet (PoE) capable etc all No's 1 99,940.00 99,940.00

SITC of 10.2" Apple iPad LED-backlit Multi-Touch display with IPS technology

with User Control Interface (UCI) Deployment etc all complete

Digitally signed by SANJAY

SITC of Apple docking and charging station with all required accessories etc all

SITC of 8-Port Gigabit PoE+ Ethernet Smart Switch with 2 SFP Ports and Cloud

Management etc all complete

38 SITC of Wireless Access Point etc all complete No's 2 27,866.00 55,732.00

SITC of 1 Meter Premium High Speed HDMI 2.0b Flexy Cable, Bandwidth up to

18Gbps, Up to 4096x2160@60Hz at RGB 4:4:4 video resolution, High Dynamic

Range (HDR10), Dolby Vision and Hybrid log–gamma (HLG) video etc all

SITC of 2 Meter Premium High Speed HDMI 2.0b Flexy Cable, Bandwidth up to

18Gbps, Up to 4096x2160@60Hz at RGB 4:4:4 video resolution, High Dynamic

Range (HDR10), Dolby Vision and Hybrid log–gamma (HLG) video etc all

SITC of 5 Meter Premium High Speed HDMI 2.0b Flexy Cable, Bandwidth up to

18Gbps, Up to 4096x2160@60Hz at RGB 4:4:4 video resolution, High Dynamic

Range (HDR10), Dolby Vision and Hybrid log–gamma (HLG) video etc all

SITC of 12.5 Meter Active Copper HDMI Cable, Data Rate: Up to 18.2Gbps,

Colour Depth: Up to 16 bits, Colour Formats: RGB 4:4:4 / Y’CBCR 4:2:2 / Y’CBCR

42 4:2:0, Consumer Electronic Control (CEC), Auto Lip-Sync Correction, Audio No's 17 12,276.31 208,697.35

Return Channel (ARC), Enhanced Audio Return Channel (eARC), High Dynamic

Range (HDR) etc all complete

SITC of 1 Meter USB Full-Featured Type-C cable for USB 3.1 Gen2, 4 Lane

Displayport Alt mode (4K60FPS Video and Audio), Supporting peripherals via

USB 2.0 up to 480 Mbps (Mouse, Keyboard, Thumb Drive, Speakerphone and

Webcam) etc all complete

SITC of 2 Meter USB Full-Featured Type-C cable for USB 3.1 Gen2, 4 Lane

Displayport Alt mode (4K60FPS Video and Audio), Supporting peripherals via

USB 2.0 up to 480 Mbps (Mouse, Keyboard, Thumb Drive, Speakerphone and

Webcam) etc all complete

SITC of 10 Meter USB 3.1 Gen1 SuperSpeed Active Extension Cable TypeA/male

to TypeA/female, Supports 4K Webcam, SSD storage, Native USB2/USB1 and

USB3 extension, Plug and play compatible with PC, Mac, and Linux etc all

Digitally signed by SANJAY

SITC of Microphone Cable, 2 Conductor 22 AWG Tinned Copper, PE Insulation,

46 85% Tinned Copper Braid Shield, Cotton Braid, PVC Jacket (as per actual) etc all Meter 200 237.50 47,500.00

SITC of 2 Conductor 16 AWG Speaker Cable, stranded Bare copper conductors,

PVC/Nylon insulation, PVC jacket (as per actual) etc all complete

48 SITC of Various Cables & Connectors etc all complete No's 24 18,525.00 444,600.00

SITC of 16U, Equipment Rack, with Front & Side doors, 4 No Fan Assembly, on

Top of the Rack, 4 Caster wheels, 2 no Shelfs to mount the equipments which are

not rack mounted, 8X2, 5/6 Amp. Power Distribution Unit, Cable Manager &

Sufficient Rack hardwares etc all complete

SITC of 24U, Equipment Rack, with Front & Side doors, 4 No Fan Assembly, on

Top of the Rack, 4 Caster wheels, 2 no Shelfs to mount the equipments which are

not rack mounted, 8X2, 5/6 Amp. Power Distribution Unit, Cable Manager &

Sufficient Rack hardwares etc all complete

Digitally signed by SANJAY

Sr.no Specification Unit Total Qty Rate (In Rs) Amount in Rs.

Supplying and placing in position of 360 degrees revolving medium back chair as per photograph. The breathable mesh back chair with cushioned fabric

seat shall be ergonomically design with adjustable lumbar back support . The chair shall be provisioned with adjustable armrest (Up-Down) with PP

padding and Adjustable Headrest(Can Adjust Movement). The seat cushion to be upholstered on 10-12mm thick water proof plywood and moulded

foam. The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303) upholsetered with Polyurethane foam and mesh fabric over it.

The chair shall be provided with self tension single locking mechanism and pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The

black Five star chrome base with hooded nylon castors..The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be operated

at 30kgs extension force.The Seat are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of

density 32-35 kg/m3. Item Sizes may vary as per site requirement & guidance under Engineer in charge.

3 seater Dimension : (L)1650mm X (D)750mm X (H)710mm nos 17 62400 1060800

1 seater Dimension : (L) 850mm X (D)750mm X (H)710mm nos 3 34800 104400

Supplying, and placing in position of sofa as per Image.A supple Camel Brown premium Leatherette upholstery adds class to the soft cushioned backrest

and seating. Sitting proudly on sleek steel legs the sofa exudes a sense of comfort that is perfect for any space. Material & subtype:Premium Leatherette,

Colour & Colour Family:Brown-Camel Brown, Seating Height:16.14" ,Legs:Stainless Steel, Finish:Matte, Size:Compact, Style:Modern, Texture:Two Tone.

steam beech solid wood have used for framing construction of sofa .The seat cushion is made of multi layered foam of density 32-35 kg/m3. The seating

cushion have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has a foam of

28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke free & soft. Item Sizes may vary as per site

requirement & guidance under Engineer in charge.

3 Center table

Dimension (L)1000mm X (W)600mm X (H)400mm nos 10 24800 248000

Supplying and placing in position of centre table as per photograph. The centre table made of solid wood (steam beech) in pu matt polish.The plain glass

placed the top of the table in 8mm thk. The turned wooden legs are sleek and sturdy providing the table with its support. The wood work below the glass

provides the glass with a focal point and some support. Add volumes of style to yourliving room with the centre table. Material & subtype: Solid Wood -

Beech Wood( spc:steam beach), Colour & Colour Family:Brown - Dark Oak,Shape:Rectangular Legs/Base:Solid Wood,

Finish:Glossy,Style:Contemporary. Item Sizes may vary as per site requirement & guidance under Engineer in charge.

Dimension: Dia 600mm x 600mm(H) nos 34 14800 503200

Supplying, and placing in position of side table as per Image. The side tablare made of solid wood. The clear round table top is made from 10mm thk

tempered glass for everyday use. The glass top is supported by beautiful wooden legs made from solid beech wood with a glossy walnut brown finish.

The side table have Solid Beech wood base with Round shape 10mm thk Tempered Glass Table Top. Colour: Walnut brown colour with a glossy finish.

Item Sizes may vary as per site requirement & guidance under Engineer in charge.

5 Oval Meeting table

Dimension: 2700mm (L) x 1650mm(D) x 750mm(H) nos 6 289379 1736274

Supplying and placing in position of oval meeting table as per image/drawing. The modular

table shall be made out of 32mm thick pre-laminated particle board with 2mm thk

pvc edge banding. The table shall be supported with combination of 32mm thick prelam particle board side panels and 25mm thick Prelam particle board

modesty panel with 2mm thk pvc edge banding. All exposed edges shall be provided with matching edge finish . Provision of 6 module fliptop box for

wire management and metal raceway under the table top for wires flow. Item Sizes may vary as per site requirement & guidance under Engineer in

6 Linear Workstation

Dimension : 1200mm(L) X 600mm(D) X 1200mm(H)

Supplying and placing of workstation of 67mm thk sliding tile base partition of 1200mm height,providing and supplying non-sharing single unit

workstation table in completely knock down conditions with an overall size 1200mm x 600mm x 1200mm that is to be assembled at site. the work top

7 Medium back Chair nos 88 16400 1443200

Digitally signed by SANJAY

Sr.no Specification Unit Total Qty Rate (In Rs) Amount in Rs.

Supplying and placing in position of 360 degree Revolving medium back chair of Dimension (W)585mm X (D)660mm X (H)1060mm as per image .

Ergonomically designed, it features a breathable mesh backrest and adjustable lumbar support to provide you all-day comfort. it offers Synchro Single

Locking Mechanism along with a Tilt Tension Control. The adjustable armrest provide deluxe comfort while the strong chrome base . The 55mm castor

wheels and a 360- degree swivel provide swift yet stable movement.High-quality fabric upholstery with high abrasion-resistance and superior tear

strength & colourfastness,Premium high-density virgin foam for comfortable seating, High stability chair with no-tip over, clearing drop test of

102kgs,Adjustable Lumbar Support for superior back support,Pneumatic Height Lift with Class IV gas lift,Adjustable headrest with Synchro Single

Locking and Tilt tension control for improved mobility. Item Sizes may vary as per site requirement & guidance under Engineer in charge.

8 Medium Height Storage

Dimension: 900mm(L) X 450mm(D) x 1200mm(H) nos 32 26400 844800

Supplying, and placing in position of medium height storage @ 1200mm height as per photograph/drawing . The storage unit having Openable shutters

with shelf in it. The modular storage unit top shall be made from 18 mm thick pre-laminated particle board and rest of the sides as well as shelves and

shutter to be made up of 18 mm thick pre-laminated particle board while back to be made of 8 mm thick pre-laminated particle board. All edges to be

provided with 2 mm thick PVC lipping. The storage unit having openable shutters withD shape handles & locking arrangement.Item Sizes may vary as

per site requirement & guidance under Engineer in charge.

Dimension : 2100mm(L) X 750mm(D) X 750mm(H)

Providing and placing in position of table as per image/drawing. Modular Table top are made up of 25mm thick pre-laminated particle board and

understructure shall be made of 18mm thick prelaminated particle board gable ends and modesty panels. The working edges shall be provided with

machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature.The table shall be provisioned with one shelf below the top are

made of 18mm thick prelaminated particle board with PVC edges.Item Sizes may vary as per site requirement & guidance under Engineer in charge.

10 High back Chair nos 9 16500 148500

Supplying and placing in position of 360 degrees revolving high back chair as per photograph. The chair Upholstered in soft fabric, the chair boasts

cushioned curved back to provide comfortable seating while also improving your posture. The chair of Size :-(W)650mm X (D)660mm X (H)1200mm.

Features like Synchro Single Locking Mechanism, Tilt Tension Control and Pneumatic Height Adjustment lets you adjust the chair to your perfect

ergonomic position. The moulded foam cushioned seat along with the adjustable armrest further elevate the seating experience. A strong chrome base

with 55 mm castor wheels combines to provide a sturdy base that can be moved with ease boosting collaboration at the workplace. Pneumatic Height

Adjustment with Class IV gas lift. Function Revolving, Pneumatic Height Lift, Tilt Tension Control, Push back Mechanism, adjustable Armrest with

chrome Base and Locking Mechanism Synchro Single Locking. Item Sizes may vary as per site requirement & guidance under Engineer in charge.

11 Fixed Chair nos 80 14000 1120000

supplying, and placing in position of medium back chair of size: (W)580mm X (D)760mm X (H)930mm as per photograph. The chrome plated 4-legs

cantilever chair. The seat crafted with enveloping comfort and fixed armrests with ergonomic position.Seat and back are made of 12- 15mm thick hot

pressed ply wood upholstered with high density form and fabric with fixed handles in frame structure with pu pads.frame are made out of ms powder

coated . Maximum Load Capacity: 120 kg.Item Sizes may vary as per site requirement & guidance under Engineer in charge.

3 seater Dimension:(L)1760mm X (D)720mm X (H)845mm nos 15 77800 1167000

1 seater Dimension:(L) 640mm X (D)720mm X (H)845mm nos 4 42800 171200

Supplying and placing in position of sofa as per photograph.The sofa is what Contemporary style looks like. Made in an option of Beige premium

Leatherette, this sofa is sleek and comfortable. The sleek frame is finished in a rich Brown polish with split panel seating. The back and seat has Medium

to Firm Cushioning for better posture. Material & subtype:Premium Leatherette,Colour & Colour Family:Beige - Pebble

Beige,,Legs:Wooden,Finish:Glossy,Style:Contemporary,Texture:Plain. The seat cushion is made of multi layered foam of density 32-35kg/m3. The

seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has a

foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke free & soft.Item Sizes may vary as per site

requirement & guidance under Engineer in charge.

13 Center Table

Dimension (L)1130mm X (W)630mm X (H)410mm nos 7 30800 215600

Digitally signed by SANJAY

Sr.no Specification Unit Total Qty Rate (In Rs) Amount in Rs.

Supplying and placing in position of centre table as per photograph. The centre table made of solid wood (steam beech) in pu matt polish.The plain glass

placed the top of the table in 8mm thk. The turned wooden legs are sleek and sturdy providing the table with its support. The wood work below the glass

provides the glass with a focal point and some support. Add volumes of style to yourliving room with the centre table. Material & subtype: Solid Wood -

Beech Wood( spc:steam beach), Colour & Colour Family:Brown - Dark Oak,Shape:Rectangular Legs/Base:Solid Wood,

Finish:Glossy,Style:Contemporary. Item Sizes may vary as per site requirement & guidance under Engineer in charge.

14 Single bed (without mattress)

Dimension (L)900mm X (W)2130mm X (H)850mm nos 2 30800 61600

Supplying and placing in position of single bed without storage as per photograph/Drawing. Clean minimal design made of straight lines coupled with

durable engineered wood is the basis for its looks. A central supporting frame adds sturdiness and also separates the space below equally incase you

wish to stove away anything underneath. Material& subtype:Engineered Wood - Particle Board, Colour & Colour Family:Brown - Wenge,

Dimension:(L)900mm X (W)2130mm X (H)850mm, Finish:Matte, Size:Single Bed, Style:Contemporary.Item Sizes may vary as per site requirement &

guidance under Engineer in charge.

Dimesnion:(W)500mm X (D)400mm X (H)450mm nos 2 10800 21600

Supplying, and placing in position of bed side table as per image/ drawing . The bed side table are made up of 18mm thick Prelaminated Particle Board.

All the exposed edges are edge banded with 2 mm thick PVC edge banding. Side panels are made of 18 mm thick Prelaminated Particle board with

2mmthk pvc edge banding . The bed side table having a provision of one drawer with open shelf in it.Item Sizes may vary as per site requirement &

guidance under Engineer in charge.

16 Study table

Dimension : 1050mm(L) X 510mm(D)x 750mm(H) nos 2 18000 36000

Providing, Placing in position of study table with one Drawer as per image . The table top and Gable End are made out of 25mm thick Pre- laminated

Particle board with 2mm thk pvc edge banding. Modesty, Vertical, Drawer of size 400mm (L) X 450mm (D) X 120mm(H) are made out of 18mm thick Pre-

laminated Particle board. All exposed edges sealed with 2mm thick PVC edge-banding. The Table shall be provisioned with single drawer, handles &

locking arrangement. The working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot

temperature.Item Sizes may vary as per site requirement & guidance under Engineer in charge.

17 Study Chair nos 2 9400 18800

Supplying and placing in Position of stackable chair as per Image. The chair of size :- (W)500mm X (D)530mm X (H)840mm is a curious one. The block

panelled back and waterfall seat cushions make this chair a classy addition to the workspace. An all metal construction with an exposed chrome frame

gives it a sleek look.The Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has

foam of density 30-32kg/m3. The backrest has a foam of 28kg/m3.Item Sizes may vary as per site requirement & guidance under Engineer in charge.

18 Round Table

Dimension (Dia) 1050mmX (H)750mm nos 3 32900 98700

Supplying, and placing in position of round table as per image/drawing . The table top are made out of 25mm thk Prelam particle board with 2mm thk

Pvc edge banding. The table top supported with MS powder coated pole with flat round plate. The working edges shall be provided with machine

pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Item Sizes may vary as per site requirement & guidance under Engineer

19 Medium back Chair nos 4 10400 41600

Supplying and placing in position of 360 degree reloving medium mesh back chair as per image. The Mesh back has a central console that provides

excellent lower back support for improved ergonomics. The seat cushion is upholstered in soft black fabric rests firmly on a nylon base powered by nylon

castors. The front facia of the chair is full of poise with its sturdy arms and detached back. Material & Subtype:Mesh, Colour & Colour Family:Black,

Dimension(W)625mm X (D)450mm X (H)920mm, Back Type:Low Back, Base:Nylon Base, Base Type:Revolving, Maximum Seating Height:20.47",

Minimum Seat Height:16.73", Function:Revolving::Pneumatic Height Lift::Tilt Tension Control::Push Back, Locking Mechanism:Push Back. The

pneumatic height shall have adjustment stroke of 75mm and shall be operated at 30kgs extension force. The Seat are made up of 12mm thk hot

pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 32- 35kg/m3.Item Sizes may vary as per site requirement

& guidance under Engineer in charge.

Main Table Dimension (L) 2000mm X (D) 900mm X (H)750mm nos 3 127600 382800

Side Runer Dimension (L)1200mm X (D) 450mm X (H) 750mm

Digitally signed by SANJAY

Sr.no Specification Unit Total Qty Rate (In Rs) Amount in Rs.

Supplying, and placing in position of main Table as per Image/ drawing.The Table top made out of 32mm thk prelam particle board with 2mm thk pvc

edge banding & side panel & modesty panel made up of 25mm thick pre-laminated particle board .The working edges shall be provided with machine

pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of 3 drawer mobile pedestal (size:- L-400mm x D-450mm x H-

600mm) attached to the table top. Pedestal Unit have a combination of 2 drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm

thick prelaminated Particle board with provision of handles & central Locking arrangement. The table have a provision of free standing Side Storage of

size 1200mm L x 450mm D x 750mm Ht., Storage Top made out of 18mm thick pre laminated particle board and rest all storage to be made out of 18

mm thick prelaminated particle board . All exposed edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue.

Storage having a provision of 3 drawer unit, one openable shutter with D shape handle & central locking arrangement, one open storage with shelf in it

.Item Sizes may vary as per site requirement & guidance under Engineer in charge.

21 Back Storage

Dimension: 2000mm(L) X 450mm(D) x 750mm(H) nos 3 36300 108900

Supplying, and placing in position of low height storage @ 750mm height as per photograph/drawing . The storage unit having Openable shutters with

shelf in it. The modular storage unit top shall be made from 18 mm thick pre-laminated particle board and rest of the sides as well as shelves and shutter

to be made up of 18 mm thick pre-laminated particle board while back to be made of 8 mm thick pre-laminated particle board. All edges to be provided

with 2 mm thick PVC lipping. The storage unit having openable shutters with D shape handles & locking arrangement.Item Sizes may vary as per site

requirement & guidance under Engineer in charge.

22 High back Chair nos 4 31000 124000

Supplying and placing in position of 360 degrees revolving high back chair as per photograph. The chair of Size :-(W)590mm X (D)505mm X

(H)1180mm - 1280mm. The chair shall be ergonomically design contour lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat

and back) upholstered with leatheritte and cut foam. The leatherette upholstery in the chair has the look and feel of top grain leather. The chrome plated

loop armrest with padded upholstery is provided for extra comfort. The chair shall be provided with pneumatic height adjustment which shall have stroke

of 10.0 +/- 0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30-35 (+/-2kg /m3) Dimensions The backrest has a foam

of 28kg/m3. Item Sizes may vary as per site requirement & guidance under Engineer in charge.

23 Medium back Chair nos 37 29000 1073000

Supplying and placing in position of 360 degrees revolving medium back chair as per photograph. The Craze chair of Size :-(W)590mm X (D)505mm X

(H)1005mm - 1115mm. The chair shall be ergonomically design contour lumbar back design made of 12mm thick BWR plywood (IS Grade - 303 for seat

and back) upholstered with leatheritte and cut foam. The leatherette upholstery in the chair has the look and feel of top grain leather. The chrome plated

loop armrest with padded upholstery is provided for extra comfort. The chair shall be provided with pneumatic height adjustment which shall have stroke

of 10.0 +/- 0.3 cm . Five star chrome base with nylon castors . Chair seat has foam of density 30-35 (+/-2kg /m3) The backrest has a foam of 28kg/m3.

Item Sizes may vary as per site requirement & guidance under Engineer in charge.

3 seater Dimension (L)1905mm X (D)890mm X (H)870mm nos 6 66400 398400

1 seater Dimension (L)960mm X (D)890mm X (H)870mm nos 7 37200 260400

Supplying, and placing in position of sofa as per Image .classic Contemporary design and slender curves. . The Sofa of stands Firm on solid PVC legs

with thick armrests that are slightly curved on the front face of the sofa. Each curve defines a seating space which provides for people to be seated

comfortably. Finished in a Brown Nappa Aire Leather, the sofa makes a fantastic first impression. The Cushioning is molded such that it flows along the

partition for a clean unified look. steam beech solid wood have used for framing construction of sofa The seat cushion is made of multi layered foam of

density 32-35kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength

. The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke free & soft. Item

Sizes may vary as per site requirement & guidance under Engineer in charge.

3 seater Dimension: 1800mm (L) x 710mm(D) x 770mm(H) nos 5 86200 431000

Supplying, and placing in position of sofa as per Image. The sofa is crafted from the best materials to make a sofa that's truly worthy of your living room.

Upholstered in a premium leatherette, the sofa is a sight for sore eyes. The curved box cut design adds an elegant charm to any space. The solid wood

frame and legs give a sturdy presence to the sofa. Seating Height 425mm,Legs Solid Wood. The seat cushion is made of multi layered foam of density

32-35kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The

backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke free & soft.Item Sizes may

vary as per site requirement & guidance under Engineer in charge.

26 Center Table

Dimension:(L) 1200mm X (D) 600mm X (H) 450mm nos 4 33600 134400

Digitally signed by SANJAY

Sr.no Specification Unit Total Qty Rate (In Rs) Amount in Rs.

Supplying and placing in position of centre table as per photograph.The center table is our timeless beautyinspired by classic mid-century design.

Complete with an open shelf are made from steam beech wood. Steam Beech wood base makes it highly durable.Material: Solid Wood - Steam Beech

Wood, Colour & Colour Family:Brown, Dimension:(W)1200mm X (D)600mm X (H)450mm,Finish:Matte.Item Sizes may vary as per site requirement &

guidance under Engineer in charge.

Main Table Dimesnion: (L)2100mm X (D)900mm X (H)750mm nos 3 142600 427800

All over Side Runner Dimension: (L)1940mm X (D)450mm X (H)650mm

Supplying, and placing in position of a straight line table with wire manager as per photograph/drawing. The main desk of size 2100mm (L) X 900mm (D)

X 750mm (H) shall be made out of 42mm thick pre laminated particle board with the approved shade. Table top supported with side panels and modesty

panel. The side panels made out of 42mm thick pre laminated Particle board & modesty panel made out of 36mm thk pre laminated Particle board of

approved shade. All working or non working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot

temperature. Provision of Pop-up - cable manager box in the table .The Fixed Side Runner attached to the table of all over size 1940mm (L) x 450mm

(D) x 650mm (H) has a provision for three drawer with locking facility , two openable shutters with locking arrangement , open storage with shelf & one

open storage for cpu.The another side panel of table top having a provision of two attached drawer as per photograph. The table top rest on SS studs for

design purpose same as per image.Item Sizes may vary as per site requirement & guidance under Engineer in charge.

28 Back Storage

Dimension: 2100mm(L) X 450mm(D) x 750mm(H) nos 3 38500 115500

Supplying, and placing in position of medium height storage @ 750mm height as per photograph/drawing . The storage unit having Openable shutters

with shelf in it. The modular storage unit top shall be made from 18 mm thick pre-laminated particle board and rest of the sides as well as shelves and

shutter to be made up of 18 mm thick pre-laminated particle board while back to be made of 8 mm thick pre-laminated particle board. All edges to be

provided with 2 mm thick PVC lipping. The storage unit having openable shutters withD shape handles & locking arrangement. Item Sizes may vary as

per site requirement & guidance under Engineer in charge.

29 High back Chair nos 4 31100 124400

Supplying, and placing in position of 360 degree revolving High back chair as per Image. This contemporary chair comprises of luxurious double padding

cushion with a central indent that provides lower back support for proper posture and comfort. The central panel in the backrest is neatly stitched with a

soft seat cushion finished in the same black leatherette. The Chair nestles on a shiny chrome vaulted base with nylon castors. the shiny armrests come

adeptly padded for comfort. Material & Subtype:Leatherette, Colour & Colour Family:Black ,Dimension(W)625mm X (D)490mm X (H)1210mm, Back

Type:High Back, Base:Chrome Base, Base Type:Revolving, Maximum Seating Height:25", Minimum Seat Height:21.25",Function: Revolving::Pneumatic

Height Lift::Tilt Tension Control::Centre Tilt, Locking Mechanism:Centre Tilt. The pneumatic height adjustment shall have adjustment stroke of 100 mm

and shall be operated at 30kgs extension force.The Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane

foam, chair seat has foam of density 32-35 kg/m3 . The backrest has a foam of 28kg/m3. Item Sizes may vary as per site requirement & guidance under

Engineer in charge.

30 Medium back Chair nos 15 28500 427500

Supplying, and placing in position of 360 degree revolving medium back chair as per Image. A contemporary design with an all black finish, the chair is a

staple in every office setting. A double padded cushion encased in an all black premium leatherette makes for one comfy seat. The side padding and the

headrest sit snugly providing added lumbar support to the user. Material & subtype:Premium Leatherette, Colour & Colour Family:Black,

Dimension(W)625mm X (D)490mm X (H)1135mm, Back Type:medium back, Base:Chrome Base, Maximum Seating Height:19",Finish:Matte.The

pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force.The Seat & back are made up of

12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The backrest has a foam of

28kg/m3. Item Sizes may vary as per site requirement & guidance under Engineer in charge.

31 Meeting Table

Dimension: 2000mm(L) X 1000mm(D) X 750mm(H) nos 3 109920 329760

Supplying, and placing in position of meeting table as per photograph/drawing. The table top are made out of 36mm thk Prelam Particle board table top

with 2mm thk pvc edge banding.Table top supported with 32mm Side panel & 25 mm thk Modesty panel with 2mm thk PVC edge banding.Providing

metal wire raceway & junction connectivity of wires & cables also having a provision of 6 Module Flip top cover.Item Sizes may vary as per site

requirement & guidance under Engineer in charge.

32 High back Chair nos 12 23100 277200

Digitally signed by SANJAY

Sr.no Specification Unit Total Qty Rate (In Rs) Amount in Rs.

Supplying, and placing in position of 360 degree revloving high back chair as per Image. The high mesh back chair is a magnificient chair with creative

tree detailing, so when you look at it from afar it feels as if a tree is emerging from the roots to the branches and leaves on the top. The leaves add

function to the design being adjustable for improved lumbar support. The chair with adjustable headrest & armrests. Material & Subtype: Mesh, Colour &

Colour Family: Black, Dimension(W)600mm X (D)500mm X (H)1282mm, Back Type:high Back, Base chrome Base, Base Type:Revolving, Maximum

Seating Height:21.25" ,Minimum Seat Height:17.32", Function: Revolving::Pneumatic Height Lift::Adjustable :Multi-Locking Knee Tilt::Adjustable Armrest,

3 D Lumbar Support,Locking Mechanism: self tention adjustment/any position multi locking, chair Handle: adjustable handle with pp pad . The Seat are

made up of 12mm thk hot pressed plywood upholstered with moulded foam and fabric, chair seat has foam of density 32-35 kg/m3.Item Sizes may vary

as per site requirement & guidance under Engineer in charge.

33 Medium back chair nos 45 21400 963000

Supplying, and placing in position of 360 degree revloving medium back chair as per Image. The medium mesh back chair is a magnificient chair with

creative tree detailing, so when you look at it from afar it feels as if a tree is emerging from the roots to the branches and leaves on the top. The leaves

add function to the design being adjustable for improved lumbar support. The chair with adjustable armrests.Material & Subtype: Mesh, Colour & Colour

Family: Black, Dimension(W)600mm X (D)500mm X (H)1090mm, Back Type:Medium Back, Base:chrome Base, Base Type:Revolving, Maximum

Seating Height:21.25" ,Minimum Seat Height:17.32", Function: Revolving::Pneumatic Height Lift::Adjustable :Multi-Locking Knee Tilt::Adjustable,

Armrest, 3 D Lumbar Support,Locking Mechanism: self tention adjustment/any position multi locking, chair Handle: adjustable handle with pp pad . The

Seat are made up of 12mm thk hot pressed plywood upholstered with moulded foam and fabric, chair seat has foam of density 32-35 kg/m3. Item Sizes

may vary as per site requirement & guidance under Engineer in charge.

Main Table Dimension: 1500mm(L) X 600mm(D) x 750mm(H) nos 4 50800 203200

Side Runner Dimension: 900mm(L) X 450mm(D) x 750mm(H)

Providing and placing of main table as per image/drawing. Modular tables of size 1500mm(L) x 600mm(D) x 750mm(H). Table top are made up of

25mm thick pre-laminated particle board and understructure shall be made of 18mm thick prelaminated particle board gable ends and modesty panels.

The working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of one CPU

trolley and PVC keyboard tray attached to the table top. The table shall be provisioned with free standing Side Storage of size 900mm L x 450mm D x

750mm Ht., Storage Top are made out of 25mm thick pre laminated particle board and rest all storage to be made out of 18 mm thick prelaminated

particle board . Storage having a sliding shutter with D shape handles and central locking arrangement. All exposed edges shall be provided with

machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. Item Sizes may vary as per site requirement & guidance under Engineer in

35 Back/Side Storage

Dimension: 1800mm(L) X 450mm(D) x 750mm(H) nos 2 33900 67800

Dimension: 1500mm(L) X 450mm(D) x 750mm(H) nos 2 27500 55000

Supplying, and placing in position of medium height storage @ 750mm height as per photograph/drawing . The storage unit having Openable shutters

with shelf in it. The modular storage unit top shall be made from 18 mm thick pre-laminated particle board and rest of the sides as well as shelves and

shutter to be made up of 18 mm thick pre-laminated particle board while back to be made of 8 mm thick pre-laminated particle board. All edges to be

provided with 2 mm thick PVC lipping. The storage unit having openable shutters withD shape handles & locking arrangement.Item Sizes may vary as

per site requirement & guidance under Engineer in charge.

36 High back Chair nos 4 17300 69200

Supplying and placing in position of 360 degree Revolving High back chair of Dimension (W)585mm X (D)660mm X (H)1305mm as per image .

Ergonomically designed, it features a breathable mesh backrest and adjustable lumbar support to provide you all-day comfort. it offers Synchro Single

Locking Mechanism along with a Tilt Tension Control. The adjustable armrest and the adjustable headrest provide deluxe comfort while the strong

chrome base . The 55m castor wheels and a 360-degree swivel provide swift yet stable movement.High-quality fabric upholstery with high abrasion-

resistance and superior tear strength & colourfastness,Premium high- density virgin foam for comfortable seating, High stability chair with no-tip over,

clearing drop test of 102kgs,Adjustable Lumbar Support for superior back support,Pneumatic Height Lift with Class IV gas lift,Adjustable headrest with

Synchro Single Locking and Tilt tension control for improved mobility.Item Sizes may vary as per site requirement & guidance under Engineer in charge.

37 L-shape Workstation (Cubicles)

Dimesnion: 1800mm (L) x 1650mm(L) x 600mm(D) x 1050mm(H) nos 28 98900 2769200

Supplying and placing in position of sliding tile base modular Workstation as per photograph. Free standing partition height 1200mm and should be

minimum of 65-67mm thick. Partition inner frame is 1.2-1.5mm thick mild steel. Horizontal and vertical trims are made out of extruded aluminum of 1.2-

38 Meeting table

Dimension: 2100mm(L) X 1000mm(D) X 750mm(H) nos 3 115400 346200

Digitally signed by SANJAY

Sr.no Specification Unit Total Qty Rate (In Rs) Amount in Rs.

Dimension: 2400mm(L) X 1200mm(D) X 750mm(H) nos 1 130200 130200

Supplying, and placing in position of meeting table as per photograph/drawing. Table top made out of 32mm thk Prelam Particle board table top with

2mm thk pvc edge banding. Table top supported with 25mm Side panel & 18 mm thk Modesty panel with 2mm thk PVC edge banding. Providing metal

wire raceway & junction connectivity of wires & cables also having a provision of 6 Module Flip top cover . Item Sizes may vary as per site requirement &

guidance under Engineer in charge.

39 High back Chair nos 12 18100 217200

Supplying and placing in position of 360 degrees revolving high back chair of size: 660mm (L) x 490mm(D) x 1315mm(H) as per photograph. The

breathable mesh back chair with cushioned fabric seat shall be ergonomically design with adjustable lumbar back support . The chair shall be

provisioned with adjustable armrest (Up-Down) with PP padding and Adjustable Headrest(Can Adjust Movement). The seat cushion to be upholstered

on 10-12mm thick water proof plywood and moulded foam. The seat to be made with 12 mm thick hot pressed BWR plywood (IS grade - 303)

upholsetered with Polyurethane foam and mesh fabric over it. The chair shall be provided with self tension single locking mechanism and pneumatic

height adjustment which shall have stroke of 10.0 +/- 0.3 cm .The black Five star chrome base with hooded nylon castors..The pneumatic height

adjustment shall have adjustment stroke of 100 mm and shall be operated at 30kgs extension force.The Seat & back are made up of 12mm thk hot

pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 32-35 kg/m3. The backrest has a foam of 28kg/m3.Item

Sizes may vary as per site requirement & guidance under Engineer in charge.

Main Table Dimension : 1500mm(L) X 600mm(D) X 750mm(H)

Overall Side Unit Dimension : 1500mm(L) X 450mm(D) x 750mm(H)

Supplying, and placing in position of main Table as per drawing/image. Modular tables of size 1500mm(L) x 600mm(D) x 750mm(H). The Table top are

made out of 25mm thk prelam particle board with 2mm thk pvc edge banding & side panel & modesty panel are made up of 18mm thick pre-laminated

particle board .The working edges shall be provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. The

table have a provision of Side Storage of size 900mm L x 450mm D x 750mm Ht., Storage Top are made out of 25mm thick pre laminated particle

board and rest all storage to be made out of 18 mm thick prelaminated particle board . All exposed edges shall be provided with machine pressed 2 mm

thick PVC lipping glued with hot melt EVA glue. Side Storage having a provision of 3 drawer unit of size: 400mm(L) x 450mm(D) x 675mm(H) attached

to the side storage top with the help of shiny metal rods. Pedestal Unit have a combination of 2 drawer & one filing drawer. The pedestal storage unit

shall be made of 18 mm thick prelaminated Particle board with provision of central Locking arrangement.Item Sizes may vary as per site requirement &

guidance under Engineer in charge.

Main Table Dimension (L)1800mm X (D) 900mm X (H)750mm nos 9 120400 1083600

Side Runer Dimension (L)1200mm X (D) 450mm X (H) 750mm

Supplying, and placing in position of main Table as per Image/ drawing.The Table top made out of 32mm thk prelam particle board with 2mm thk pvc

edge banding & side panel & modesty panel made up of 25mm thick pre-laminated particle board .The working edges shall be provided with machine

pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of 3 drawer mobile pedestal (size:- L-400mm x D-450mm x H-

600mm) attached to the table top. Pedestal Unit have a combination of 2 drawer & one filing drawer. The pedestal storage unit shall be made of 18 mm

thick prelaminated Particle board with provision of handles & central Locking arrangement. The table have a provision of free standing Side Storage of

size 1200mm L x 450mm D x 750mm Ht., Storage Top made out of 18mm thick pre laminated particle board and rest all storage to be made out of 18

mm thick prelaminated particle board . All exposed edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue.

Storage having a provision of 3 drawer unit, one openable shutter with D shape handle & central locking arrangement, one open storage with shelf in it

. Item Sizes may vary as per site requirement & guidance under Engineer in charge.

42 Back Storage

Dimension: 1200mm(L) X 450mm(D) x 750mm(H) nos 9 22900 206100

Supplying, and placing in position of medium height storage @ 750mm height as per photograph/drawing . The storage unit having Openable shutters

with shelf in it. The modular storage unit top shall be made from 18 mm thick pre-laminated particle board and rest of the sides as well as shelves and

shutter to be made up of 18 mm thick pre-laminated particle board while back to be made of 8 mm thick pre-laminated particle board. All edges to be

provided with 2 mm thick PVC lipping. The storage unit having openable shutters withD shape handles & locking arrangement. Item Sizes may vary as

per site requirement & guidance under Engineer in charge.

Main Table Dimension:(L)2400mm X (D)1130mm X (H)770mm nos 1 289200 289200

Side Runner Dimension: :(L)1200mm X (D)600mm X (H)770mm

Digitally signed by SANJAY

Sr.no Specification Unit Total Qty Rate (In Rs) Amount in Rs.

Supplying, and placing in position of table as per photograph. Desk is designed with superb qualityFinish made of engineered wood-medium density

fibre board & veneer glossy finish on the same. Functional and stately, with a sturdy design style, this L shape desk is sure to make a dramatic

statement in the office. Featuring a cherry finish, with delicate panel moulding and a fantastic size.The modesty frame of the table gives the great look

with panel upholstered wth PVC material which gives the leatherette look.Main Table top thkness 80mm , side panel/gable end in 70mm thk mdf with

venner glossy finish. Main table and side runner having a skirting @120mm thk with gives a rich look. The office desk comes with the side runner having

enough storage space.The side runner top with a thickness of 80mm thk that gives the great look . Side table, side panel, shelves,drawers made up of

18mm thk mdf with venner finish. Table having a provision of Pedestal of size: 400(L) X 500(D) X 660(H) having three drawers to store essential &

undestructure made out of 18mm thk mdf with venner finish .Drawers have the stylish handle which enhance the look. Material & Subtype:Engineered

Wood - Medium Density Fibre Board, Colour & Colour Family:Red - Cherry.side storage unit having a side panel, one drawer , one shutter & one shelf of

18mm thk mdf with venner finish. Item Sizes may vary as per site requirement & guidance under Engineer in charge.

44 Back Storage

Dimension:(L)2000mm X (D)450mm X (H)2000mm nos 1 108900 108900

Supplying, and placing in position of back storage as per photograph/drawing. A well-built bookcase with the looks this is the complete package. A

compartmentalized shelving system with adequate space ensures any book will fit in the shelf. This Bookshelf are made out of 18mm thk prelam particle

board with 2mm thk pvc edge banding . The lower cabinets provisioned with openable shutters with shelf , D shape handles, locking arrangements and

also provisioned with open storage with shelf in it. The upper area to have open shelves for display. The working edges shall be provided with machine

pressed 2mm thick PVC edging using special hot melt glue at hot temperature.Item Sizes may vary as per site requirement & guidance under Engineer

45 High back Chair nos 1 36000 36000

Supplying and placing in position of 360 degrees revolving high back chair as per image. The Leatherette office chair of size:- (W)655mm X (D)500mm

X (H)1230mm is a ergonomic high back chair made for a business tycoon or a director. The seat is constructed from a combination of resilient plywood

and soft foam for a comfortable seat. The foam cushions are encased in a chocolate brown leatherette upholstery. The seat arms come padded with

foam and are covered in the same brown upholstery for a relaxed armrest. Powered by a synchro multi locking mechanism the chair offers you extreme

comfort as per your seating position. The office seat is supported by a shiny chrome base powered by sturdy nylon castors. Function:

Revolving::Pneumatic Height Lift::Tilt Tension Control::Synchro single locking, Base: Chrome Base, Locking Mechanism: Synchro single locking. The

pneumatic height adjustment shall have adjustment stroke of 100mm and shall be operated at 30kgs extension force. The Seat and back are made up

of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 38-40 kg/m3 . The backrest has a foam

of 28 (+/-2kg /m3 ).Item Sizes may vary as per site requirement & guidance under Engineer in charge.

46 Medium back chair nos 8 33000 264000

Supplying and placing in position of 360 degrees revolving medium back chair as per image. The Leatherette office chair of size:- (W)555mm X

(D)500mm X (H)1105mm is a ergonomic low back chair made for a business tycoon or a director. The seat is constructed from a combination of resilient

plywood and soft foam for a comfortable seat. The foam cushions are encased in a chocolate brown leatherette upholstery. The seat arms come padded

with foam and are covered in the same brown upholstery for a relaxed armrest. Powered by a synchro multi locking mechanism the chair offers you

extreme comfort as per your seating position. The office seat is supported by a shiny chrome base powered by sturdy nylon castors. The pneumatic

height adjustment shall have adjustment stroke of 100mm and shall be operated at 30kgs extension force. The Seat and back are made up of 12mm

thk hot pressed plywood upholstered with PVC with polyurethane foam, chair seat has foam of density 38-40 kg/m3 . The backrest has a foam of 28 (+/-

2kg /m3 ).Item Sizes may vary as per site requirement & guidance under Engineer in charge.

Dimension (W)1000mm X (D)865mm X (H)850mm nos 3 61200 183600

Supplying and placing in position of sofa as per image.Elegant flared backrest, cushioned arms and solid wood tapered legs capture modern refinement

in the Johanna collection. Tailored to perfection in luxurious, supple top-grain leather, this sofa is a livable luxury that lasts you for a lifetime. Material &

Subtype:Leather, Frame Material:Engineered Wood,Solid Wood, Upholstery Material:Leather, Seat Material:Leather, Leg Material:Solid Wood,

FinishMatte, Colour & Colour Family:Brown - Tan Brown Seating Height:460mm, Assembly Type:Knock Down. The seat cushion is made of multi

layered foam of density 32-35kg/m3. The seating cushion have 2.75 & 1.75 inches of elastic webbing. The thread used is nylon bonded to provide lasting

stitch strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer of 200 gsm. The polyster polyfill keeps the upholstery wrinke free &

soft.Item Sizes may vary as per site requirement & guidance under Engineer in charge.

Dimension (L) 520mm X (D) 400mm X (H) 555mm nos 3 22600 67800

Supplying & placing in position of side table as per image.Made from 10mm thick tempered glass, its artistic shape allows for a spacious tabletop and

easy-access storage for magazines and books. The clear glass finish and the Beech wood legs enhance your living space with exquisite glamour.

Designed from 10mm thick tempered glass with Spacious tabletop. Easy access storage with Strong Beech wood legs.Item Sizes may vary as per site

requirement & guidance under Engineer in charge.

Digitally signed by SANJAY

Sr.no Specification Unit Total Qty Rate (In Rs) Amount in Rs.

49 Meeting table

Dimesnion:2400mm(L)x 1200mm(D)x 760mm(H) nos 1 101400 101400

Supplying and placing in position of modern design 8 seater conference table as per photograph. the main desk overall size is 2400mm(l)x 1200mm(d)x

760mm(h), the table top and legs shall be made out of 70- 80mm thick mdf board including with 0.5mm laminate with glossy finish and, leatherette

attached on table top for extra comfort or looks, laminate mdf with glossy finish. The desk table top carries a leatherette folio with an inbuilt wire

management system for easy access. the under structure shall be made out of 9-18mm thick 0.5mm laminate with glossy finish mdf board. Table top

made 50 mm thick, table top offers you a generous workspace, desk primary work surface use premium quality materials. Our work surface furniture is

finished with natural veneer shall be finished with same matching natural veneer edge banding tape of same matching colour in brown - walnut and

shade with p.u.polish.Item Sizes may vary as per site requirement & guidance under Engineer in charge.

50 Single bed (without mattress)

Dimension (W)1070mm X (D)2080mm X (H)950mm nos 1 34800 34800

Supplying and placing in position of single bed without storage as per photograph/Drawing. The Leeds collection infuses the charm of classics to your

space. Crafted with sustainably sourced solid wood, each silhouette celebrates distinctive wood grains finished in classic Dark Oak.The slatted

headboard and wooden feet are tapered to perfection. Masterfully crafted of solid wood in a Dark Oak finish.Classic slatted headboard makes it a

statement piece.Tapered legs add an airy appeal.Moisture-resistant 12mm thick premium plywood mattress board.An intensive 6-step polish process

lends a velvety finish.Seating Height 350mm.Item Sizes may vary as per site requirement & guidance under Engineer in charge.

51 Study Table

Dimension (W)1150mm X (D)600mm X (H)760mm nos 1 22000 22000

Supplying and placing in position of Study table as per photograph/Drawing.Defined by clean lines and a rich combination of classic walnut and frosty

white finish, the desk makes a workspace or study room that sparks creativity. Tiered tabletop design looks timeless while keeping you clutter-free with

Open storage and two spacious drawers offer ample space for your essentials.Ample leg space lets you stretch your legs for added comfort.Smooth

finished edges eliminate moisture seepage, prevent warping and make it last longer.Premium polish with low chemical emissions ensures healthy indoor

air for your family.Item Sizes may vary as per site requirement & guidance under Engineer in charge.

52 Study Chair nos 1 24243 24243

Supplying, and placing in position of 360 degree revolving medium back chair as per Image. The chair having a Knee tilt with single locking mechanism

and chrome handle & base with nylon castor. The seat & back upholstered with black pvc. Gas lift for height adjustment with 5 prong chrome base with

castors. The chair of size: (W)550mm X (D)630mm X (H)980mm. The pneumatic height adjustment shall have adjustment stroke of 100 mm and shall be

operated at 30kgs extension force.The Seat & back are made up of 12mm thk hot pressed plywood upholstered with PVC with polyurethane foam, chair

seat has foam of density 38- 40 kg/m3 The backrest has a foam of 28kg/m3. Item Sizes may vary as per site requirement & guidance under Engineer in

53 Lounge Chair nos 2 44600 89200

Supplying, and placing in position of lounge chair as per photograph/drawing .Gemini accent chair brings back the classic charm with its diamond tufted

wingback, carefully accented with nailhead trim and artistically carved legs. The generous settle-in cushions wrapped in the premium soft fabric invite you

to lounge.Material & Subtype:Fabric,Dimension:(W)768mm X (D)768mm X (H)911mm, Seating Height:460mm, Colour & Colour Family:Beige -

Cream,Seat Material:Fabric.The seat cushion is made of multi layered foam of density 35-38kg/m3. The seating cushion have 2.75 & 1.75 inches of

elastic webbing. The thread used is nylon bonded to provide lasting stitch strength . The backrest has a foam of 28kg/m3 with polyster polyfill outer layer

of 200 gsm. The polyster polyfill keeps the upholstery wrinke free & soft. Item Sizes may vary as per site requirement & guidance under Engineer in

Dimension: 1200mm(L) X 600mm(D) X 750mm(H) nos 1 43800 43800

Supplying, and placing in position of Free standing table as per Image/drawing. The table top are made up of 25mm thick pre-laminated particle board

with 2mm thk pvc edge banding . The Table supported with 18mm thk Prelam Particle board side panel & Modesty panel. The working edges shall be

provided with machine pressed 2mm thick PVC edging using special hot melt glue at hot temperature. Provision of one fixed Pedestal storage unit

(combination of two drawers and one filing drawer) . Pedstal Unit made of 18mm thk prelaminated particle board with 2mm thk pvc edge banding. Item

Sizes may vary as per site requirement & guidance under Engineer in charge.

55 Back Storage

Dimension: 900mm(L) X 450mm(D) x 750mm(H) nos 1 16500 16500

Digitally signed by SANJAY

Sr.no Specification Unit Total Qty Rate (In Rs) Amount in Rs.

Supplying, and placing in position of medium height storage @ 750mm height as per photograph/drawing . The storage unit having Openable shutters

with shelf in it. The modular storage unit top shall be made from 18 mm thick pre-laminated particle board and rest of the sides as well as shelves and

shutter to be made up of 18 mm thick pre-laminated particle board while back to be made of 8 mm thick pre-laminated particle board. All edges to be

provided with 2 mm thick PVC lipping. The storage unit having openable shutters withD shape handles & locking arrangement.Item Sizes may vary as

per site requirement & guidance under Engineer in charge.

56 Conference Room Table

Dimension W) 8600mm X (D) 600mm X (H) 750mm (overall depth 2550mm) nos 1 588900 588900

Supplying and placing in position of conference table as per image/drawing. The work surface top should be of thickness 42mm top prelaminated

particle board with 2mm thick PVC edge banding. The side panel are made up of 36mm thick prelaminated particle & modesty panel are made out of

25mm thick prelaminated particle board with 2mm thick PVC edge banding. The wire carrier should be made from 0.6mm thick CRCA & powder coated

40-50 microns. Also having a provision of 6 module flip top box & metal raceway for wire flow. Item Sizes may vary as per site requirement & guidance

under Engineer in charge.

57 Workstation 120''Degree

Workstation 120 degree- 1500mm(W1) x 1500(mmW2) x 600mm(D) x 1050mm(H) nos 15 68200 1023000

Supplying and placing in position of Workstation as per photograph/drawing. The modular workstation shall be made out of 25mm thick pre -laminated

particle board of approved shade. The working and non working edges shall be finished with machine pressed with 2mm PVC egdge banding. The table

top shall be supported with MS powder coated C- shaped leg of size 50mm x 50mm thickness with connectors of size 40mm x 40mm. Provision of

18mm thick Soft board panel above the table top with MS powder coated holders. Provision of Junction box & wire raceway for wire passing. The

workstation shall be provisioned with Pedestal Unit of size:- L-400mm x D-450mm x H-600mm with a combination of 2 drawer & one filing drawer. The

pedestal storage unit shall be made of 18 mm thick prelaminated Particle board with provision of D shape handles & Locking arrangement. Provision of

one PVC keyboard tray and CPU trolley for each seating.Item Sizes may vary as per site requirement & guidance under Engineer in charge.

Total Amount Including GST@18% In Rs= 31498277

Total Amount Including GST@18% In Rs= 31498277

Note The above BoQ is prepared based on the concept layout attached with the tender, actual sizes may vary as per site requirement or as per the selection of the client

Digitally signed by SANJAY

SCHEDULE OF QUANTITIES: SIGNAGE

S No Description Unit Qty Unit price DSR Amount Non-DSR Amount

1 RECEPTION 3D ACRYLIC SIGNAGE

Providing, fabricating and fixing of 3D Acrylic Letters raised 1.5 inches of

required size and shape with arrangement of screws in the letters itself for

mounting on the walls or pasting using 3M VHP Tape. Fixing complete as per

directions of the engineer. The Sizes would be calculated in Sqft as per Logo

Design provided.

Tentative Size 42"X60"

2 NAME SIGNAGE CHANGEABLE (All Floors)

Providing sinages of SS (304) or acrylic as per required size as desired by client

3 FIRE EVACUATION MAP / SIGN.

Providing and fixing of Clear Acrylic sandwich frame of 3mm & 2mm acrylic with

Evacuation Plan Printed on photoluminescent media and inserted between the

two frames. Should be fixed on the wall using 4 Screw/ SS studs. Size 12 inch x Each 8 2,673.00 21384.00

4 FIRE ESCAPE EDGE-LIT SIGNAGE

Providing and fixing of Edge-Lit signage with battery backup. Made from acrylic

sheet of 8 mm thickness laser engraved, Transformer to be inbuilt. Maintenance

- free sealed nickel cadmium battery included • 120V/277V AC Operation •

Crystal clear acrylic face panel• Engraved letters increase visibility • Anodized Each 8 3,289.00 26312.00

aluminum faceplate • Field applied chevron directional indicators simplify

installation • Long life, energy-saving LED lamps • Dual-voltage 120V/277V AC

Operation • UL listed. To be installed at stairs entry. Size 310mm x 175mm

5 FIRE SAFETY SIGNAGE

Providing fabricating and fixing of signage 05 mm thick Acrylic / Sun board sheet

at base with photoluminescent film self adhesive & colored vinyl ( Red/Green)

Plotter cut and pasted on top. Both side / Single Side facing Complete including

fixing on wall with screws and washers or hanging on ceiling with GI chain/GI Bar

complete as per technical specifications and directions of Engineer.

Photoluminescent signages Each 16 535.00 8560.00

TOTAL 442422.00

Digitally signed by SANJAY

SCHEDULE OF QUANTITIES: HORTICULTURE

S NO DESCRIPTION Unit Total Qty Rate DSR Amount Non DSR Amount Ref. Image

Rectangular FRP

Planter(LP7A-24"X8"X10")

Rectangular FRP

Planter(LP7A-24"X10"X12")

Round FRP Planter(LP9A-

Round FRP Planter (LP9B-

Artificial Vertical Garden on

Preserved Moss 1.5" THK

Plantation: Supply and

installaion of Natural Plant

7.1 with sand, fertilizer etc. Each 350 500.00 175,000.00

NET TOTAL 411,100.00

SCHEDULE OF QUANTITIES-ART WORKS

S NO MR DESCRIPTION UNIT QUANTITY RATE

DSR (INR) NON DSR (INR)

Hand painting directly on wall creating design and creation of Art work concept on given subject.

With initial visit to site, preparation of various designs with different material, providing the

1 MR samples, layout for approval, improvisation in short listed creative’s and making of final layout for sq m 1 14144.67 14144.67

final production by enlargement of drawing as per ratio of actual size, to prepare detailed working

shop drawings (full scale) based on the Concept drawings .

Mixed media mural Wood/metal/fiberglass/terracotta /tiles or anything other medium artist find

suitable as long as it is permanent in nature. Creating design and creation of Art work concept on

given subject. With initial visit to site, preparation of various designs with different material,

providing the samples, layout for approval, improvisation in short listed creative’s and making of

2 MR final layout for final production by enlargement of drawing as per ratio of actual size, to prepare sq m 2 7158.96 14317.92

detailed working shop drawings (full scale) based on the Concept drawings / Views / site

conditions ,Display of actual size dummy /mock up Fabricated in sun board with digital print for

client approval.

Metal Sculpture permanent in nature

Concept Creation

Creating design and creation of Art work concept on given subject. With initial visit to site,

preparation of various designs with different material, providing the samples, layout for approval,

improvisation in short listed creative’s and making of final layout for final production by

enlargement of drawing as per ratio of actual size, to prepare detailed working shop drawings (full

scale) based on the Concept drawings/ Views/ site conditions, display of actual size dummy/ mock

up Fabricated in sun board with digital print for client approval

Artwork Execution

Execution of approved design in SS 316 grade steel /SS 304 grade SS (1.5mm-2mm thick)/

STONE/ ALLUMINUM/ MIXED MEDIA METAL pu colored (IF REQUIRED) antique as per

approved finish (MRF/ Akzonobel) and protected against discoloration by sealing it with top coat of

MRF/ Akzo nobel clear Pu. Proper support system will be given as per approved shop drawing, to

withstand high wind pressure. The sculpture will be free from any Undulation /Dent unless it is part

of the design. The cost is inclusive of transport/packing and installation of the same at site.

Fastener/screws Hilti or equivalent company.

Providing and fixing theme artwork/ any other as per direction and site requirement from the local

4 MR artisans as per the selection of the client and the architect.

Panels of various sizes No. 20 5334.00 106680.00

Providing and fixing CANVAS paiting of different sizes as per the selection and approval of client

TOTAL ART WORKS 0.00 477737.59

Digitally signed by SANJAY