Repair of roofing for Gymnasium, Reception area, back office, Bar, Restaurant, Kitchen, Room No. 103,107,117,121,214,232 and Replacement of ceiling, Eaves Board of Room No. 207,208,223 and 224, Painting of roof trusses with wooden colour and bottom o

Amount

Providing and fixing 12.5 mm thick MR GRADE GYPSUM (Suspended false ceiling (flat / vertical) consisting of 12 mm thick gypsum sheet fixed to the runner with steel screws (Non corrosive). finished smooth to an even surface complete as per design and drawing.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Finishing walls with Acrylic Smooth exterior paint of required shade :

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :

With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

Providing and fixing Coloured concrete Roofing Tiles of size 420mm x 330 mm 10mm thick in approved design, colour and shade upto any pitch and fixing with self drilling fastners complete as per manufacturer's specification of SHERA and equivalent manufacturer.

Providing and fixing Coloured Concrete Roofing Tile Accessories in approved design, colour and shade with self drilling fastener complete as per manufacture's specifications. RIDGE CAPS

Ridges

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.

On steel work

SHIPRA CONSTRUCTION

ARJUN MANDAL

C.M.ROY CONSTRUCTION

M/s Sagar Enterprises