Improvement works to the P-5_7 to P-5_12 quarters for providing hostel to the Thermal Training Institute at Vallur camp.

Amount

Improvement works to the P-5/7 to P-5/12 quarters for providing hostel to the Thermal Training Institute at Vallur camp.

Dismantling the existing Indian Water closet and surki around the closet and clearing the site and disposing the debris away from the site including the cost of all labour, lead, lift, T&P, etc., complete

Patch plastering the ceiling in cm 1:3 mix 20mm thick over brick wall / concrete surface after removing the peeled off/ damaged plaster surface and as directed at site including the cost of all materials, labour, lead, lift, T&P etc., complete.

Patch plastering the wall in cm 1:5 mix 12 mm thick over brick wall surface after removing the peel off/ damaged plaster surface as directed at site including the cost of all materials, labour, lead, lift, T&P etc., complete.

Providing and fixing of new Country Wood door frame of size (100 x 50mm) for Door to suit with old shutters and as directed by the Engineer at site.

Providing, laying and jointing 25 mm PVC pipes (having working pressure 10kg. / sq.cm) including cost of cutting, threading and fixing PVC specials with necessary clamps, scaffolding cost of material, labour, lead, lift, T&P etc., complete as directed by the Engineer at site.

Providing, laying and jointing 32 mm PVC pipes (having working pressure 10kg. / sq.cm) including cost of cutting, threading and fixing PVC specials with necessary clamps, scaffolding, cost of material, labour, lead, lift, T&P etc., complete as directed by the Engineer at site.

Providing, laying and jointing 63mm dia PVC pipes (having working pressure 6kg. / sq.cm) including cost of cutting, threading and fixing PVC specials with necessary clamps, scaffolding, including cost of material, labour, lead, lift, T&P, etc., complete as directed by the Engineer at site.

Providing, laying and jointing 110mm dia PVC pipes (having working pressure 6kg. / sq.cm) including cost of cutting, threading and fixing PVC specials with necessary clamps, scaffolding, cost of material, labour, lead, lift, T&P, etc., complete as directed by the Engineer at site.

Providing & fixing in position 15mm dia PVC Tap of approved make & quality conforming to IS Specification including the cost of all materials, labour, lead, lift, T&P etc., complete.

Providing and Fixing up CP Shower rose and CP angle valve of standard quality with necessary specials, labour charges, etc., complete.

Providing glazed EWC of approved Make & quality with 'P' or 'S' trap [Parryware - ELITE - or equivalent] with double flapped PVC Antimicrobial Solid Seat cover, PVC low level SlimLine Cistern with all necessary fittings (viz.) Brass nipple, GM wheel valve, Nylon connection, CP brass fittings, etc., connecting to water main complying with standard specifications including the cost of all materials, labour, lead, lift, T&P, etc., complete.-1set

Removing and refixing of aluminum window glazed shutters after replacement of damaged aluminum hinges with new hinches including cost of inches and labour charges, etc., complete.

Providing and fixing of Door lock (Godrej or Equivalent) with required screws & T&P, etc., complete as directed by the Engineer at site.

Supplying and fixing of 5.5mm thick plain glass for windows including labour charges, lead, lift, cutting charges, T&P, etc., complete as directed by the Engineer at site.

Supplying and fixing of 1200mm(48") sweep AC ceiling fan complete with regulator with 300mm down rod on the existing clamp.

Supply and fixing of single box type 4'40W flu fitting complete with copper choke and condensor with TW round block on wall or ceiling with flu. Tube with PVC unsheathed leads from terminals to the fitting.

Supplying and fixing of LED buld 7W/9W including all cost of labour, lead, etc., complete as per direction Engineer at site

Wiring with 2x2.5 sq.mm PVC unsheathed SC Copper cable of 650V grade in suitable PVC 16mm dia rigid pipe on wall and ceiling with PVC accessories and with TW switch box with painting of suitable colour with continuous earth wire connection of 14SWG TC wire for open PVC light point/ fan point.

Wiring with 2x2.5 sq.mm PVC unsheathed SC Copper cable of 650V grade in suitable PVC 16mm dia rigid pipe on wall and ceiling with PVC accessories and with TW switch box with painting of suitable colour with continuous earth wire connection of 14SWG TC wire for 5A 3pin plug point.

Painting two coats with approved acrylic distemper over cement plastered wall surface and ceiling of the interior surface with approved quality and colour with through scrapping and washing the surface removing of dirt, algae, etc., including necessary plaster of paris, putty where ever required including all cost of labour, lead, scaffolding, etc., complete as per direction Engineer at site.

Painting two coat with ready mixed enamel paint of approved quality over the wooden surface including scrapping, clean removal of dirt, labour charges, cost of paint, etc., complete.

Painting the ornamental M.S. grill works with two coats of enamel paint including labour charges, thorough scrapping, clean removal of dirt, etc., complete

Supplying and Paving of bathroom wall and floor with Design Ceramic Tiles of approved make and colour over a base layer of CM 1:3 20mm thick and pointed with same coloured cement.

Paving the floor with plain/design Vitrified tiles (colour and shade as directed) of size 600 mm x 600mm x 8 mm in all floors over a base layer of cement mortar 1:3) 20mm thick laid in-situ and pointed with same coloured cement.

Removing and refixing the wooden door to carry and repair works to the door, including all labour, lead, lift, all materials, T&P, etc., complete as directed by the Engineer at site.

Supplying and fixing of Granite slabs of size 4' x 2' (Black Colour) and above 18mm to 20mm thick for kitchen cabinet top with a bed of 20mm thick cement mortar 1:3 including all materials, polishing, labour, lead, lift, etc., complete.

Providing and fixing in position Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter.

Supplying and fixing of door flush type (single leaf) with factory made shutters using 25 mm particle board as per IS 3087/1985 with b-type T.W beading bonded with water resisting adhesive fixed to C.W door frame of size 100 x 65 mm and fully threaded GI screw as per ISO 1003/1977 and with following fixtures for door. 6 nos iron hold fast of size 230 x 5 x 50 mm, 3 nos oxidized iron but hinges 100 mm size, 2 nos 200 x 12 mm anodizes aluminium tower bolts, 1 no 250 x 16 mm anodized aluminium aldrop, 1 no rubber bush, 1 no wire stopper, 2 no anodized aluminium handles of size 150mm, 1 no chromium plated internal locking arrangement of approved quality

Providing 0.60m x 0.45m size Aluminium ventilators made of aluminium Box section of size 101.6x44.45x3.18mm with three nos 16mm MS rod, 3mm thick pin headed glass loovers 5 nos, including the cost of all materials, labour, lead, lift, T&P, etc., complete.

Supplying and providing ornamental grills for windows asing 20 x 5 mm Ms Flats as shown in the drawing and fixing in position, including the cost of all materials, labour, lead, lift, T&P, etc., and as directed by the Engineer at the site.

Providing wash hand basin of size 550 mm x 400 mm with all accessories such as cast iron brakets, 32mm dia CP waste coupling, rubber plug and chain, 32mm dia ‘B’ class G.I. waste pipe. 1.5mm dia G.I wheel valve, 15mm dia 47 u=nylon connection, 15mm dia brass nipples, 15mm CP pillar tap, etc., complete

VIMALA ENTERPRISES (BID ID -1104770)

P RAJALINGAM CONTRACTOR (BID ID -1104680)