Childrens Auditorium, Yanam

Amount

4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:2:4 (1 cement:2coarse sand : 4 graded stone aggregate 20mm nominal size).

8.2.2.1 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab upto 0.50 sqm.

8.3.2 Extra for providing edge moulding to 18mm thick marble stone counters, vanities, etc., including machine polishing to edge to give high gloss finish etc., complete. - Granite work.

9.18.1 Providing and fixing prelaminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS:3087 marked with one side decorative and other side balancing lamination grade 1,type II exterior grade IS : 12823 marked in shelves with screws and fittings wherever required , edges to be painted with polyurethene primer (fittings to be paid separateley) - 18mm thick.

11.41.4A Providing and laying fully vitrified floor tiles of size 100X100cm (thicknes to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS: 15622 of approved make (Nitco / Rak / Johnson / Asian) in all colors and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 1000x1000mm.

12.52 Providing and fixing tiled false ceiling of approved materials of size 595X595mm in true horizontal level suspended on interlocking metal grid of hot dipped galvanised steel sections (galvanised @ 170gsm / sqm.) consisting of main T runner with suitable spaced joints to get required length and of size 24X38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm centre to centre and cross T of size 24X25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main T at 600mm center to center to form a grid of 1200X600mm and secondary cross T of length 600mm and size 24X25mm made of 0.30mm thick propogation test of 'cl (minimum) sheet to be interlocked at middle of the 1200X600mm pannel to form grids of 600X600mm and wall angle of size 21X21X0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever required cutting / making opening for services like diffusers, grills, light fittings, fixtures, smoke detector etc., Main T runners to be suspended from ceiling using G.I. slotted cleats fixed to ceiling with 6mm dia and 50mm long dash fasteners, 4mm G.I. adjustable rods with galvanised level clips ...

12.62 Providing and fixing false ceiling works using superior fire rated gypsum board of 12.5mm tk mounted on GI frame work with ceiling section of size 80x26x0.55x3660 mm spacing at 600mm c/c suspended from ceiling using hanger rods at 1200mm c/c with screw to level and line and applying one coat of primer , two coats of putty followed by and reflective paint in front of the stage area to the required shape and size , including scaffolding etc.complete as directed by the engineer -in-charge upto 6.5m height.

12.70 Providing and fixing colour coated galvalume sheet of 550 M.P.A yield of AZ 150 strength formed as per patterned steel rib profile with the depth of 31mm pitch of 250mm and overall width of 1060mm and thickness 0.5mm with required J or C hook bolts and nets 8mm dia G.S paint and working etc., complete excluding the cost of purlin , rafter and truss etc.

13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade - New work (Two or more coat applied @ 1.67 ltr / 10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg / 10 sqm).

13.62.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50m lead - For thickness of tiles above 10mm and upto 25mm.

15.41 Dismantling cement asbestos, Celotax or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50m lead.

1.4.3 Supplying and fixing of modular GI box for 3 module .including cutting the wall and making good the same as required - Make: Legrand-Mosaic/MK/ Siemens.

1.4.4 Supplying and fixing of modular GI box for 4 module .including cutting the wall and making good the same as required - Make:Legrand-Mosaic/MK/ Siemens.

1.4.4 Supplying and fixing of modular GI box for 4 module .including cutting the wall and making good the same as required - Make:Legrand-Mosaic/MK/ Siemens.

1.4.7 Supplying and fixing of modular GI box for 12 modules. including cutting the wall and making good the same as required - Make:Legrand-Mosaic/ MK/ Siemens.

1.7.4.3 Supplying and fixing of modular base and cover plate for 3 module on the existing modular metal boxes etc. as required. Make: Legrand-Mosaic/ MK/ Siemens/ Crabtree/ ABB.

1.7.4.4 Supplying and fixing of modular base and cover plate for 4 module on the existing modular metal boxes etc. as required. Make: Legrand-Mosaic/MK/ Siemens/Crabtree/ ABB.

1.7.4.6 Supplying and fixing of modular base and cover plate for 8 module on the existing modular metal boxes etc. as required. Make: Legrand.

1.7.4.7 Supplying and fixing of modular base and cover plate for 12 module on the existing modular metal boxes etc. as required. Make:Legrand.

2.2.3.4 Supplying and fixing 63 amps rating four pole, 415Volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc .as required. Make: Siemens/ ABB/L&T Hager.

2.2.2.1 Supplying and fixing 6 amps to 32 amps rating ,Single pole,240 volts,'c' series,miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: ABB/ L&T Hager

1.7.1.1 Supplying and fixing S.P 1 way 5/6amps piano/flush type switch on the existing switch box/cover including connections etc. as required. Make: Kundan/ Anchor/ Vinay.

1.7.1.4 Supplying and fixing S.P 1 way 15/16amps piano/flush type switch on the existing switch box/cover including connections etc. as required.Make:Kundan/ Anchor/Vinay.

1.7.1.3 Supplying and fixing 3 pin 5/6amps piano/flush type socket outlet on the existing switch box/cover including connections etc. as required.Make:Kundan/Anchor/Vinay.

1.7.1.6 Supplying and fixing 3 pin 15/16amps piano/flush type socket outlet on the existing switch box/cover including connections etc.

1.8.1.2 Installation, testing and commissioning of prewired, all kind of recess mount light fittings, complete with all accessories etc. On false ceiling, including connections with 16/0.20 mm twin core FR PVC sheathed flat.

Basic Code No.3061 Supplying and fixing 3x36w CFL Recess Mounting low glare mirror optic square type fitting with Paralite louvers. Make: Philips/ Bajaj etc complete as directed by the Engineer-in-charge.

Basic Code No.3121 Supplying and fixing 36W CFL lamp for Pin type. Make: Philips etc complete as directed by the Engineer-in-charge.

2.1.9 Supplying, Installation,testing and commissioning of surface/recess mounting, vertical type,415Volts, TPN MCB distribution board of sheet steel, dust protected, duly phosphatized and powdered painted, inclusive of 200amps tinned copper busbar, common neutral link, earth bar, din bar for mounting MCB's, detachable gland/ knock out plate, of folloing ways (But without MCB's and incommer) as required.

Basic Code No.3296 Supplying and fixing 4KVA Stabilizer etc complete as directed by the Engineer-in-charge.

Basic Code No.3213 Supplying of 4 x 50sqmm armoured aluminium U.G cable - 1.1 KV grade.Make: Finolex/Polycab etc complete as directed by the Engineer-in-charge.

Basic Code No.3175 Supplying and fixing 125/ 200/ 250/315A DIN HRC fuse base. make: Standard/ Havells/C&S etc complete as directed by the Engineer-in-charge

Basic Code No.3159 Supplying and fixing 125A HRC fuse link (DIN type). Make: Standard/ Havells/C&S/L&T etc complete as directed by the Engineer-in-charge.

Basic Code No.3148 Supplying and fixing 63A cutout fuse unit. Make: Kundan etc complete as directed by the Engineer-in-charge.

Basic Code No.3257 Supplying and fixing 50sqmm copper lug etc complete as directed by the Engineer- in-charge.

Basic Code No.1225 Supplying and fixing 25 mm dia. ISI marked, PVC conduit. Make: Avonplast/Vijaya etc complete as directed by the Engineer-in-charge.

NON-PSR Supplying and fixing of 4 star or above rated wall mountable splic type 2.0 tons capacity A.C. unit as per IS 1391 (part 2) with following specifications Material for body for Indoor unit ABS normal cooling capacity (K.cal/Hr) 6000 power consumption min (watts) 2700 Min room discharge Air flow (cum/hour) 800 Air conditioner shall be suitable for 230 V 50 Hz operation and capable of performing the function as cooling air circulating and filtering and confirm to IS 106/17 part (I), 1983 Amendment 1+2 MakeDaikin/ Carrier / O General.

3.2 Earthing with G.I. Earth pipe 4.5mt long and 40mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) as required:-

11.5 Laying of one number additional PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade, of size exceeding 25sq.mm but not exceeding 120sq.mm direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning protective covering and refillilng the trench etc as required.

1.5.1 Supplying and drawing of 1.5 sqmm. FR PVC insulated, copper conductor, single core cable in the existing surface/recessed, PVC/ steel conduit/ PVC casing and capping as required. Make: Finolex/ Polycab.

1.5.2 Supplying and drawing of 2.5 sqmm. FR PVC insulated, copper conductor, single core cable in the existing surface/recessed, PVC/steel conduit/ PVC casing and capping as required.Make: Finolex/Polycab.

1.5.3 Supplying and drawing of 4.0 sqmm. FR PVC insulated, copper conductor, single core cable in the existing surface/recessed, PVC/steel conduit/ PVC casing and capping as required.Make: Finolex/Polycab.

1.5.4 Supplying and drawing of 6.0 sqmm. FR PVC insulated, copper conductor, single core cable in the existing surface/recessed, PVC/steel conduit/ PVC casing and capping as required.Make: Finolex/Polycab.

1.5.5 Supplying and drawing of 10.0 sqmm. FR PVC insulated, copper conductor, single core cable in the existing surface/recessed, PVC/steel conduit/ PVC casing and capping as required.Make: Finolex/Polycab.

1.5.6 Supplying and drawing of 16.0 sqmm. FR PVC insulated, copper conductor, single core cable in the existing surface/recessed, PVC/steel conduit/ PVC casing and capping as required.Make: Finolex/Polycab.

Mattaparthi Ganeswara rao

Gali Veerabhadra Rao

vankayala Narendra

Akula Satti Babu