REPAIRS/ REPLACEMENT OF WATER SUPPLY PUMP, CONTROL VALVES AND CONNECTED ITEMS AND WATER INSTALLATIONS INCLUDING SIGNAGE BOARD AT WELLINGTON STATION UNDER GE WELLINGTON

Amount

Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth and getting out in hard/ dense soil for laying of GI/ DI Pipe all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 Cms thickness all as specified and directed.

Removing excavated material to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed.

Ball valve/ float valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of size 15mm dia complete all as specified and directed.

Ball valve/ float valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of size 20mm dia complete all as specified and directed.

Ball valve/ float valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of size 25mm dia complete all as specified and directed.

Taking up/ down carefully serviceable / unserviceable CI/DI pipe (including all fittings) with flanged ends and joints, connections from the trenches of size of 80mm dia all as specified and directed.

Taking up/ down carefully serviceable / unserviceable CI/DI pipe(including all fittings) with spigot and socket ends and joints, connections from the trenches of size of 100mm dia all as specified and directed.

Taking up/ down carefully serviceable / unserviceable CI/DI pipe(including all fittings) with spigot and socket ends and joints, connections from the trenches of size of 150mm dia all as specified and directed.

Ductile iron pipe 80mm bore dia, spigot and socket ends, including specials class 'K-9" and including rubber gasket ( push on) joints of same make of DI pipe having two sections of different hardness for spigot and socket pipes as in trenches complete all as specified and directed.

Ductile iron pipe 100mm bore dia, spigot and socket ends, including specials class 'K-9" and including rubber gasket ( push on) joints of same make of DI pipe having two sections of different hardness for spigot and socket pipes as in trenches complete all as specified and directed.

Ductile iron pipe 150mm bore dia, spigot and socket ends, including specials class 'K-9" and including rubber gasket ( push on) joints of same make of DI pipe having two sections of different hardness for spigot and socket pipes as in trenches complete all as specified and directed.

Ductile iron specials such as bends, tapers, tee pieces (single and double branch) any type and angle/ radius and straight connecting piece but all ends socketed/ flanged of size 80, 100 to 150 mm dia bore complete all as specified and directed. Make-Srikalahasthi pipe Ltd, Tata, Electro steel, Tisco, Jindal

Taking up/ down carefully serviceable / unserviceable CI/DI pipe (including all fittings) with flanged ends and joints, connections from the trenches of size of 80mm dia all as specified and directed.

Taking up/ down carefully serviceable / unserviceable CI/DI pipe (including all fittings) with flanged ends and joints, connections from the trenches of size of 100mm dia all as specified and directed.

Taking up/ down carefully serviceable / unserviceable CI/DI pipe (including all fittings) with flanged ends and joints, connections from the trenches of size of 150mm dia all as specified and directed.

Ductile iron pipe of 80mm dia bore size, double end flanged type, class-K9 confirming to IS- 8329:2000 with cement mortar lining with portable slag cement as per relevant IS code, with metalic zinc coating with finishing layer of bituminous coating as per relevant IS including all accessories and fitting specials complete all as specified and directed.

Ductile iron pipe of 100mm dia bore size, double end flanged type, class-K9 confirming to IS- 8329:2000 with cement mortar lining with portable slag cement as per relevant IS code, with metalic zinc coating with finishing layer of bituminous coating as per relevant IS including all accessories and fitting specials complete all as specified and directed.

Ductile iron pipe of 150mm dia bore size, double end flanged type, class-K9 confirming to IS- 8329:2000 with cement mortar lining with portable slag cement as per relevant IS code, with metalic zinc coating with finishing layer of bituminous coating as per relevant IS including all accessories and fitting specials complete all as specified and directed.

Rubber gasket joint (tyton-Joint) for CI / DI spigot and socket pipe line of size 80mm dia bore including fixing and testing complete all as specified and directed. Make- Tata, Electro steel, Jindal

Rubber gasket joint (tyton-Joint) for CI / DI spigot and socket pipe line of size 100mm dia bore including fixing and testing complete all as specified and directed. Make- Tata, Electro steel, Jindal

Rubber gasket joint (tyton-Joint) for CI / DI spigot and socket pipe line of size 150mm dia bore including fixing and testing complete all as specified and directed. Make- Tata, Electro steel, Jindal

80 mm DI mechanical joint confirming to relevant latest IS code all as specified and directed.

100 mm DI mechanical joint confirming to relevant latest IS code all as specified and directed.

150 mm DI mechanical joint confirming to relevant latest IS code all as specified and directed.

Automatic Air release Valve Reducer 100mm to 80mm confirmiring to relevant latest IS code all as specified and directed.

Automatic Air release Valve Reducer 200mm to 100mm confirmiring to relevant latest IS code all as specified and directed.

Supply and fix threaded/ Welded MS flange 80mm dia joint for GI pipe with all necessary fittings all as specified and directed.

Supply and fix threaded/ Welded MS flange 50mm dia joint for GI pipe with all necessary fittings all as specified and directed.

Supply and fix threaded/ Welded MS flange 40mm dia joint for GI pipe with all necessary fittings all as specified and directed.

Taking up/ down carefully serviciable/ unserviceable 15mm dia GI Pipe and connections from the trenches or removal from walls, floors etc all as specified and directed.

Taking up/ down carefully serviciable/ unserviceable 20mm dia GI Pipe and connections from the trenches or removal from walls, floors etc all as specified and directed.

Taking up/ down carefully serviciable/ unserviceable 25mm dia GI Pipe and connections from the trenches or removal from walls, floors etc all as specified and directed.

Taking up/ down carefully serviciable/ unserviceable 40mm dia GI Pipe and connections from the trenches or removal from walls, floors etc all as specified and directed.

Taking up/ down carefully serviciable/ unserviceable 50mm dia GI Pipe and connections from the trenches or removal from walls, floors etc all as specified and directed.

Taking up/ down carefully serviciable/ unserviceable 80mm dia GI Pipe and connections from the trenches or removal from walls, floors etc all as specified and directed.

Steel water tubing medium grade galvanized with all fittings and laid in trenches / fixed on walls / floors of size 15mm bore all as specified and directed.

Steel water tubing medium grade galvanized with all fittings and laid in trenches / fixed on walls / floors of size 20mm bore all as specified and directed.

Steel water tubing medium grade galvanized with all fittings and laid in trenches / fixed on walls / floors of size 25mm bore all as specified and directed.

Steel water tubing medium grade galvanized with all fittings and laid in trenches / fixed on walls / floors of size 40mm bore all as specified and directed.

Steel water tubing medium grade galvanized with all fittings and laid in trenches / fixed on walls / floors of size 50mm bore all as specified and directed.

Steel water tubing medium grade galvanized with all fittings and laid in trenches / fixed on walls / floors of size 80mm bore all as specified and directed.

Cutting existing steel tubing 15mm dia for alterations and screwing existing steel tubing with requred acessories (Tee,Nipple and etc) all as specified and directed.

Cutting existing steel tubing 20mm dia for alterations and screwing existing steel tubing with requred acessories (Tee,Nipple and etc) all as specified and directed.

Cutting existing steel tubing 25mm dia for alterations and screwing existing steel tubing with requred acessories (Tee,Nipple and etc) all as specified and directed.

Cutting existing steel tubing 40mm dia for alterations and screwing existing steel tubing with requred acessories (Tee,Nipple and etc) all as specified and directed.

Cutting existing steel tubing 50mm dia for alterations and screwing existing steel tubing with requred acessories (Tee,Nipple and etc) all as specified and directed.

Taking out existing unserviceable gunmetal gate valve of size 50/40/25/20 mm dia after dismantling existing union, nipple and cutting the rusted out thread and making new thread for inserting new gate valve.

Gunmetal gate valve with iron wheel head screwed both ends for iron pipe of size 50mm dia all as specified and directed.

Gunmetal gate valve with iron wheel head screwed both ends for iron pipe of size 40mm dia all as specified and directed.

Gunmetal gate valve with iron wheel head screwed both ends for iron pipe of size 25mm dia all as specified and directed.

Gunmetal gate valve with iron wheel head screwed both ends for iron pipe of size 20mm dia all as specified and directed.

Gunmetal gate valve with iron wheel head screwed both ends for iron pipe of size 15mm dia all as specified and directed.

Water level monitoring instrument based on magnetic level sensing, sensor should sealed inside stainless steel and actuated by float and LED display Gives Level Indication (5 stages of 20% each) Automatic Control of Pump and Warning Alarms if level goes outside the automation range, including of necessary electrical wiring from float to LED display complete all as specified and directed.

Arresting water leakge from sluice valve of 80 mm bore, by refacing regrinding of sluice valve, repacking stuffing box of sluice valve spindle including taking apart and reassembling the same including replacing old check nuts with new one made out of MS/CI material with and including replacing perished gland packing, rubber gasker, bolts and nuts complete all as specified and directed.

Arresting water leakge from sluice valve of 100 mm bore, by refacing regrinding of sluice valve, repacking stuffing box of sluice valve spindle including taking apart and reassembling the same including replacing old check nuts with new one made out of MS/CI material with and including replacing perished gland packing, rubber gasker, bolts and nuts complete all as specified and directed.

Arresting water leakge from sluice valve of 150 mm bore, by refacing regrinding of sluice valve, repacking stuffing box of sluice valve spindle including taking apart and reassembling the same including replacing old check nuts with new one made out of MS/CI material with and including replacing perished gland packing, rubber gasker, bolts and nuts complete all as specified and directed.

Taking down old unserviceable sluice valve and Supply and fix PN-1.60 sluice valve cast iron double flanged type non raising spindle with hand wheel and fixed by means of suitable bolts and nuts etc,after putting new rubber gasket etc for 80mm dia all as specified and directed.

Taking down old unserviceable sluice valve and Supply and fix PN-1.60 sluice valve cast iron double flanged type non raising spindle with hand wheel and fixed by means of suitable bolts and nuts etc,after putting new rubber gasket etc for 100mm dia all as specified and directed.

Taking down old unserviceable sluice valve and Supply and fix PN-1.60 sluice valve cast iron double flanged type non raising spindle with hand wheel and fixed by means of suitable bolts and nuts etc,after putting new rubber gasket etc for 150mm dia all as specified and directed.

Cutting PCC paving / road etc not exceeding 15cm thick for laying of Pipe all as specified and directed.

PCC 1:2:4 type B-1 using 20mm graded stone aggregate 100mm thick for making good road, finished fair and even all as specified and directed.

Construction of brick masonry valve chamber 230 mm thick wall of 600 mm x 600 mm x 860 mm ht internal size, for valves upto 50mm size necessary earth work and excavation in any type of soil, 150 mm thick PCC foundation in 1:4:8 type D2 using 40mm graded stone aggregate, brick work in walls with sub class B bricks built in CM 1:6, PCC Coping 75mm thick and bed blocks for embedding the angle iron hold fasts with PCC 1:2:4 type B using 20 mm stone aggregates, rendering in CM 1:4, 15 mm thick finished fair and even without using extra cement, including provision of MS Sheet cover 2mm thick fixed to MS angle iron frame made out of 40mm x 40 mm x 4 mm thick, two coats of synthetic enamel paint over a coat of red oxide primer to steel surfaces and locking arrangements with lock and key including taring to the embedded steel surfaces complete including taking out old chamber all as specifed and direted.

Construction of brick masonry valve chamber 230 mm thick wall of 900 mm x 900 mm x 860mm ht internal size, for valves of size 80/100 mm , necessary earth work and excavation in any type of soil, 150 mm thick PCC foundation in 1:4:8 type D2 using 40mm graded stone aggregate, brick work in walls with sub class B bricks built in CM 1:6, PCC Coping 75mm thick and bed blocks for embedding the angle iron hold fasts with PCC 1:2:4 type B using 20 mm stone aggregates, rendering in CM 1:4, 15 mm thick finished fair and even without using extra cement, including provision of MS Sheet cover 2mm thick fixed to MS angle iron frame made out of 40mm x 40 mm x 4 mm thick, two coats of synthetic enamel paint over a coat of red oxide primer to steel surfaces and locking arrangements with lock and key including taring to the embedded steel surfaces complete including taking out old chamber all as specifed and direted.

Construction of brick masonry valve chamber 230 mm thick wall of 1200 mm x 1200 mm x 860mm ht internal size, for valves of size more than 100mm , necessary earth work and excavation in any type of soil, 150 mm thick PCC foundation in 1:4:8 type D2 using 40mm graded stone aggregate, brick work in walls with sub class B bricks built in CM 1:6, PCC Coping 75mm thick and bed blocks for embedding the angle iron hold fasts with PCC 1:2:4 type B -1 using 20 mm stone aggregates, rendering in CM 1:4, 15 mm thick finished fair and even without using extra cement, including provision of MS Sheet cover 2mm thick fixed to MS angle iron frame made out of 40mm x 40 mm x 4 mm thick, two coats of synthetic enamel paint over a coat of red oxide primer to steel surfaces and locking arrangements with lock and key including taring to the embedded steel surfaces complete including taking out old chamber all as specifed and direted.

Foot valves of size 80 mm of cast iron flange ends swing type with rubber seats of single disc type complete including taking out old foot valve all as specified and directed.

Foot valves of size 100 mm of cast iron flange ends swing type with rubber seats of single disc type complete including taking out old foot valve all as specified and directed.

Disconnecting the electric motor of capacity 10HP from position, strip opening the motor, taking out burnt copper winding wire from slots, cleaning the slots, rewinding the motor with suitable gauge of copper winding wire, insulating and vernishing, baking, including supply and replacing the bearings and refixing the motor with proper alignment with pump set, connecting up the electric connections testing, commissioning and transporting complete all as specified and directed.

All as per item No 68 hereinbefore but 15HP motor all as specified and directed.

All as per item No 68 hereinbefore but 25HP motor all as specified and directed.

All as per item No 68 hereinbefore but 40HP motor all as specified and directed.

All as per item No 68 hereinbefore but 30HP motor all as specified and directed.

All as per item No 68 hereinbefore but 2HP motor all as specified and directed.

All as per item No 68 hereinbefore but 1HP motor all as specified and directed.

All as per item No 68 hereinbefore but 7.5HP submersible centrifugal pump all as specified and directed.

All as per item No 68 hereinbefore but 10HP centrifugal pump all as specified and directed.

Dismantling the defective centrifugal pump set, multi stage of capacity 40HP from foundation by opening of coupling and foundation bolts and transporting to workshop for repairing and reassembling after servicing and overhauling complete with oiling / greasing, lubricating the parts including repair/ replacement of worn out parts and spray painting with one coat of existing colour paint and writing SM / MES No with white paint and installation, commisioning and testing on full load complete all as specified and directed. Note: (i) The rate quoted for this item shall include labour charge only for maint, repair and replacement of defective / unserviceable spares/ accessories. Spares are to measured and paid separately under subsequent items. (ii) Cost of other minor items/ spares such as nut, bolt washers, gaskets, paint etc which are not covered but required for effective functioning of the plant shall be deemed to be included in this item. (iii) The spares shall be of original make of pump as suitable as approved

Supply only CI impeller (one No) for centrifugal pump set, multi stage of capacity 40HP all as specified and directed.

Supply only bearing (2 Nos) for front and rear side of centrifugal pump set, multi stage of capacity 40HP all as specified and directed.

Supply only Gun metal bush (2 Nos) for front and rear side of centrifugal pump set, multi stage of capacity 40HP all as specified and directed.

Supply only Key suitable for impeller of centrifugal pump set, multi stage of capacity 40HP all as specified and directed.

Supply only Key suitable for coupling of centrifugal pump set, multi stage of capacity 40HP all as specified and directed.

Supply only Coupling set suitable for coupling of centrifugal pump set, multi stage of capacity 40HP all as specified and directed.

Supply only rubber bush with bolts, nuts, washers and spring washers suitable for centrifugal pump set, multi stage of capacity 40HP all as specified and directed.

Dismantling the defective centrifugal pump set, multi stage of capacity 25HP from foundation by opening of coupling and foundation bolts and transporting to workshop for repairing and reassembling after servicing and overhauling complete with oiling / greasing, lubricating the parts including repair/ replacement of worn out parts and spray painting with one coat of existing colour paint and writing SM / MES No with white paint and installation, commisioning and testing on full load complete all as specified and directed. Note: (i) The rate quoted for this item shall include labour charge only for maint, repair and replacement of defective / unserviceable spares/ accessories. Spares are to measured and paid separately under subsequent items.. (ii) Cost of other minor items/ spares such as nut, bolt washers, gaskets, paints etc which are not covered but required for effective functioning of the plant shall be deemed to be included in this item. (iii) The spares shall be of original make of pump as suitable as approved

Supply only CI impeller (one No) for centrifugal pump set, multi stage of capacity 25HP all as specified and directed.

Supply only bearing (2 Nos) for front and rear side of centrifugal pump set, multi stage of capacity 25HP all as specified and directed.

Supply only Gun metal bush (2 Nos) for front and rear side of centrifugal pump set, multi stage of capacity 25HP all as specified and directed.

Supply only Key suitable for impeller of centrifugal pump set, multi stage of capacity 25HP all as specified and directed.

Dismantling the defective centrifugal pump set, multi stage of capacity 15HP from foundation by opening of coupling and foundation bolts and transporting to workshop for repairing and reassembling after servicing and overhauling complete with oiling / greasing, lubricating the parts including repair/ replacement of worn out parts and spray painting with one coat of existing colour paint and writing SM / MES No with white paint and installation commisioning and testing on full load complete all as specified and directed. Note: (i) The rate quoted for this item shall include labour charge only for maint, repair and replacement of defective / unserviceable spares/ accessories. Spares are to measured and paid separately under subsequent items.. (ii) Cost of other minor items/ spares such as nut, bolt washers, gaskets, paints etc which are not covered but required for effective functioning of the plant shall be deemed to be included in this item. (iii) The spares shall be of original make of pump as suitable as approved

Supply only CI impeller (one No) for centrifugal pump set, multi stage of capacity 15HP all as specified and directed.

Supply only bearing (2 Nos) for front and rear side of centrifugal pump set, multi stage of capacity 15HP all as specified and directed.

Supply only Gun metal bush (2 Nos) for front and rear side of centrifugal pump set, multi stage of capacity 15HP all as specified and directed.

Supply only Key suitable for impeller of centrifugal pump set, multi stage of capacity 15HP all as specified and directed

Dismantling the defective centrifugal pump set, multi stage of capacity 10HP from foundation by opening of coupling and foundation bolts and transporting to workshop for repairing and reassembling after servicing and overhauling complete with oiling / greasing, lubricating the parts including repair/ replacement of worn out parts and spray painting with one coat of existing colour paint and writing SM / MES No with white paint and installation, commisioning and testing on full load complete all as specified and directed. Note: (i) The rate quoted for this item shall include labour charge only for maint, repair and replacement of defective / unserviceable spares/ accessories. Spares are to measured and paid separately under subsequent items. (ii) Cost of other minor items/ spares such as nut, bolt washers, gaskets, paint etc which are not covered but required for effective functioning of the plant shall be deemed to be included in this item. (iii) The spares shall be of original make of pump as suitable as approved

Supply only CI impeller (one No) for centrifugal pump set, multi stage of capacity 10HP all as specified and directed.

Supply only bearing (2 Nos) for front and rear side of centrifugal pump set, multi stage of capacity 10HP all as specified and directed.

Supply only Key suitable for impeller of centrifugal pump set, multi stage of capacity 10HP all as specified and directed

Fully Automatic Star Delta Starter 7.5 to 15 HP type ML 1.5 current rating 10 to 25 Amps in Sheet-Steel Enclosure with Single Phase Protection feature (Motor Rating AC-3 Duty, 415 V, 50HZ, 3 Ph) including taking out old starter all as specified and directed. Make L&T Cat No. SS94362 or equivalent in ABB/ Siemens.

Fully Automatic Star Delta Starter 25 HP type ML-2 current rating 25 to 40 Amps in Sheet-Steel Enclosure with Single Phase Protection feature (Motor Rating AC-3 Duty, 415 V, 50HZ, 3 Ph) including taking out old starter all as specified and directed. Make L&T Cat No. SS94364 or equivalent in ABB/ Siemens.

Fully Automatic Star Delta Starter 40 HP type ML-3 current rating 35 to 65 Amps in Sheet-Steel Enclosure with Single Phase Protection feature (Motor Rating AC-3 Duty, 415 V, 50HZ, 3 Ph) including taking out old starter all as specified and directed. Make L&T Cat No. SS94366 or equivalent in ABB/ Siemens

Three core flat PVC insulated Copper Cable, nominal area of conductor 6 Sqmm, 1100 volts, conforming to IS:694 including taking out old cable all as specified and directed.

Three core flat PVC insulated Copper Cable, nominal area of conductor 10 Sqmm, 1100 volts, conforming to IS:694 including taking out old cable all as specified and directed.

Supply only Sodium hypochlorite granule all as specified and directed. Make: Aquafit

Supply only Alum (Poly aluminum chloride) for water treatment all as specified and directed. Make: Vikram Pac

Single phase preventer for three phase motars and sumbmersible pumps of existing models and as per required specification in ground all as specified and directed.

Painting for elctric motar of capacity of 1HP to 15 HP with a coat of approved colour paint including inlet and outlet pipelines over a coat of redoxide primer on rusted part complete including prepration of old painted surface and writing MES number all as specified and directed

Painting for elctric motar of capacity of 25 HP to 40HP with a coat of approved colour paint including inlet and outlet pipelines over a coat of redoxide primer on rusted part complete including prepration of old painted surface and writing MES number all as specified and directed

Applying two coats of synthetic enamel paint over a coat of red oxide primer after preperation of surfaces of pipe lines of any size/type on surface/floors within the pump house/intstallation premises etc for sizes upto & including 250mm bore complete all as specified and directed. (Length include running connecting fittings such as bends, tees, crosses etc.)

Site Clearance cutting grass, bushes, creapers weeds, unwanted plants/ growths etc in and arround water supply installations, settling tanks, weirs, check dams or any other locations as decided

Repair the unserviceable Sluice Valve for back wash of the Rapid Sand Filter Old Type, Removing carefully and transporting to he Workshop repaireplacement unserviceable parts and servicing, conditioning the valve for continuous operations and refixing the same at existing location and testing the rapid sand filter for backwash and wash out complete all as specified and directed. Note (1) Incase of any damage occured in any parts of Old Sluice Valve at e at the time of removing, the parts are not available in the market then it will be make in laith with the same material ie (Copper, Brass, Steel) and fixed the same in leu of damaged parts without any extra cost. (ii) In case of any U/S Mtrl not available in the market then it will made from laith and fixed properly The work will excecute and completed within one weak from remove the valve from

Taking down old Unsv DoL stater, supply and fix DoL Sater for motar of 2HP to 5 HP Capacity all as specified and directed

Taking down cement or cement lime plaster, any description on brick or stone walls or ceiling, etc.including raking out joints, hacking for key, scrubbing down with water, etc ,complete all as specified and as directed Note: Rates shall be quoted inclusive of required scaffolding for a height upto 10 meters building till plaster/ pointing and finishing

Rendering 15mm thick in two layers on fair faces of brick work or concrete surface in cement mortar 1:4 finished even and smooth (without using extra cement) mixed with water proofing compound complete all as specified and as directed. Note: i) Rates shall be quoted inclusive of required scaffolding for a height upto 10 meters building. ii) Water proofing compound will be measured and paid separately.

Supply only liquid water proofing compound all as specified and directed.

Preparation of new plastered surfaces of wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS - 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surfaces complete all as specified and as directed.

Preparation/ Removal of old treated surface of plastered / stone / brick wall surfaces and applying one coat of Exterior Emulsion Paint (Anti Fungal) white or tinted complete all as specified and as directed. Note: 1. Rates shall be quoted inclusive of required scafolding for a height upto 10 meters buildings.

Preparation of old plastered surface of wall including washing rubbing down and stopping of distempered/ painted surface and applying one coat of distemper oil emulsion washable on old surfaces on walls including filling and making surface smooth making good chipped off surfaces as required complete all as specified and directed.

Repair, Repainting and rewritting the glow sign board / name board of power house/ sub station and pump house etc complete all as specified and directed.

PCC 1:2:4 type B-1 using 20mm graded stone agreegate for making good PCC/ road cutting finished fair and even and pole coping all as specified and directed.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for all as specified and directed.

Schedule of Credit (Minus) Rs. 88910.00 NOTE: Bidder shall insert credit amount of Rs. 88910.00 as rate in Green field under Col-5.

KRA Engineering and Construction (BID ID -3406733)

ACE PROMOTERS (BID ID -3406685)

shree jayam enterprises (BID ID -3407967)

JOE ENTERPRISES (BID ID -3407518)

sree devi construction (BID ID -3406262)

K.AYYAPPAN (BID ID -3407972)

GMS Builders (BID ID -3406780)