Repair and maintenance work of the link road Jamalpur se Molanapur marg and nahar ki puliya and machalisahar madiyahu marg se bind basti tak.

Earth work in cutting or in embankment in ordinary soil excavation to be the form of regular pits not exceeding 1/2 meter (20”) in depth and earth work in enbankment to be in 20cm (8") layers, including ramming and dressing the surface to required levels and slopes and also including 1.5m (5”) lift and 30m (100’) lead. The earth form cutting to be used in making embankent or to be deposited as spoil banks within 30m (100') distance as directed by the E/I.

WBM Grading-3 Providing, laying, spreading and compacting stone aggregates of specific sizes (22.4-53 mm) obtained from approved querry of water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming type 'B' screening materials to fill up the interstices of coarse aggregate, watering and compacting to the required denstity grading-3 as per Technical specification clause.4.7/405(3)

PRIME COAT Providing and applying primer coat with bitumen emulsion (SS) on Prepared Surface of granular base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm. Using mechanical means (MORD 502)

TACK COAT Providing and applying tack coat with bitumen (VG-10) using pressure distributer @0.30 Kg/sqm. On the prepared bitumenuos/granular surface end with mechanical broom (MORT&H 530)

Premix carpet Providing, laying and rolling of open graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing coarse on a previously prepared base including mixing in a suitable plant, laying and rolling with 3 wheel 80-100 kn static roller capacity finished to required level and grade to be followed by seal coat of either type C as per technical specification

Seal Coat Providing and laying seal coat sealling the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C per Technical specification Clause 510

Brick Edging Brick edging on both side of road with first class brick 8cm (3") wide 12cm (4.50") deep laid with mud mortar including all materials, labour, T&P etc. complete.

RCC Hume Pipes RCC Hume Pipes NP-3 inculidng collars/ spigot jointed with stiff mixture of cement in the proportion of 1:2 (1 cement : 2 find sand) including testing of joints. :350mm

Excavation in Foundation Excavation in foundation in ordinary soil (loam clay or sand) including lift up to 1.5m and lead up to 30m. and including filling watering and ramming of excavated earth into the space between the building and the sides of foundat

P.C.C. Concrete with 4 cm gauge stone ballast sand 1.25FM and cement in proportion of 8:4:1 in foundation and under floor including supply of all materails,labour and T&P required for proper completion of work,SI no. 281