CERTAIN REPAIRS OF ROOFING, CEILING, JOINERIES, BRICKWORKS, PLASTERING, FLOORING, TILING, PERIODICAL SERVICESandCERTAIN B/R WORKS IN HELIPAD AREA OF1RandO FLT AND JOINERIES, GLAZING, PLUMBING, RCC, PERIODICAL SERVICES AND ALLIED WORKS INCL REPAIR/REP

Amount

Taking down shutters of any description n exc 1 sq. m each and removal from site.

All as per Item No 1 above but Area .exc 1 sqm but n exc 2 sqm each

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n’exc1.5 Sqm

Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc1.5 Sqm but n’exc 4Sqm

Hacking out old broken glass any thickness, size, quality or description, from metal/wooden frame including punching or drilling out old glazing pins and removal of demolished material from site .

Demolition of brick work masonry built in cement mortar incldg all quoins arches pillars etc

Demolition of reinforced cement concrete in ground floors and pavings n exc 15 cm thickness (reinforcement cut as required to facilitate demolition).

Dismantling timber scantlings 40 sq. cm and over in section, in any position

Dismantling asbestos cement (corrugated ted, semi corrugated, etc.) sheets in roof coverings

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.,including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories)

Cutting holes into or through brick walls , built in cement mortar sperficial area Exc 400sq.cm but nexc 0.10 Sqm

Taking down cement plaster of any description on brick or stone walls/concrete surface etc. including racking out joints, hacking for key, scrubbing down with water etc .

Dismantling floor, hearth or wall tiling, including cement mortar bedding (but not backing ) removing serviciable tile to store & rubbish off the permisses.

M&L for glazed ceramic coloured tiles 300 X 200X 7mm thick as on vertical surfaces such as skirting, dado, and risers to steps etc set and jointed in cement slurry and pointed in white or colour cement to match complete .

M&L Non skid ceramic coloured tiles 7-8 mm thick (square or rectangular) area of each tile exc 0.06 SM but not exc 0.11 SM in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match .

S&F in repairs of Plain fillets, square, rectangular in section, clean sawn, 2nd class hard wood exc 13 & n. exc 25 Sqm.cm fixed with screws in old position

M & L Brick wk with sub class ‘B’ bricks straight or curved on plan exc. 6m mean radius in CM 1:4

S&F Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) confirming to FE-290 (Gde 165)

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to FE-290 (Gde 165)

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws .

M&L Reinforced cement concrete type B1 1: 2:4 (20mm graded aggregate)for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likes

M&L providing RCC precast water troughs & manhole cover slab in cement concrete type B1 (1:2:4) using 20mm graded crushed stone aggregate and set in cement mortar (1:4) .

Use & waste formwork to soffits of suspended flat slabs such as roof slabs, floor slabs, landings and similar work not exc 200 mm thick (Horizontal or sloping) rough finished complete.

Use & waste formwork to edges of RCC concrete flats n exc 20 cm wide and sides of RCC bands or similar work to achieve rough finished complete.

M & L Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to

M & L Mild steel TMT bars 8mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to

S&F Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate , etc. complete

S&F 2nd class hard wood 35 mm thick glazed & skelton shutter (any no of pannel) open rebated and prepared to receive glass gauge etc with sash bar edges to framing plain chamfered or receive glass gauge etc with sash bar edge of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 clause 8.24 (a).

S&F 2nd class hard wood 35 mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and shown on drawing in SSR Part-II (2010) .

S&F mild steel work as in hold fasts and similar small articles conforming to Fe410-0 or Fe 310-0

M&L for PCC in hold fast and other similar bands, type B1 1:2:4 using 20mm graded stone aggregate.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples.

M&L in repair 18/19 mm thick block boards grades 2 quality interior grade decorative type with decorative face veneer on both faces complete

S & F Continuous (piano) hinges 30mm, mild steel, bright finish or electrogalvanised

S & F 100 mm Butt hinges medium weight medium cold rolled mild steel complete all as spd and directed by Engr-In-Charge .

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete.

S&F of 150 mm size aluminium handles cast type anodised.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete.

S&F Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete.

M&L for welding in repair exc 2.5cm but n exc 5cm in length thickness of metal to be welded N.exc 6mm complete.

S & F 3mm thick plain sheet glass ordinary quality & glazing with oil putty n.exc 0.50 Sqm in each pane.

All as per item No 44 above but 4 mm thick figured glass pin headed type n.exc 0.50 sqm each .

S & F 5.50 mm thick plain sheet glass ordinary quality & glazing with oil putty exc 0.50 Sqm in each pane.

M&L Securing glass in repairs of any description in existing metal frames glazed with putty/ beads including removing loose or decayed putty/beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured)

S&F PVC (SWR) pipes 110 mm single socketed in any length with rubberring joints, laid in trenches or in floors

S&F PVC bends any radius 110 mm dia

Taking up or down 15mm dia steel tubing and connection including cleaning for re-fixing or removal from site .

S & F, 15mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors.

Taking up or down 20mm dia steel tubing and connection including cleaning for re-fixing or removal from site .

S & F 20mm bore galvanized steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors.

S&F in repair PVC Ball valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule and fixed 20 mm bore pipe

S & F in repair, 15 mm bore bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule, complete.

S&F in repairs of 15 mm pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe.

S&F in repair 15 mm bore angle/ stop valves , fancy type chromium plated with long shank and cup (concealed type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete

S&F in repair Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 20 mm bore pipe.

S&F in repair PVC cabinet looking mirror box type (Make-PRAYAG or equivalent

M & L, 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:4) surface finished even & smooth without using extra cement.

S&F mild steel works as in ladders and similar work conforming to Fe 410-0 or Fe 310-0

M&L for Plain Cement concrete Type C-1 1:3:6 as in foundations of ladder , filling and mass-concrete

S & F in repairs 20mm MS tube powder coated as in curtain rod incl two Nos of decorative brackets fixed to walls complete all as specified

S & F in repairs PVC valve less symphonic action type flushing cistern, 10 ltr capacity low level with all internal fittings and PVC connection & flush pipe of polyethylene low or high density PVC tube 32 mm dia connected to WC

S& F in repair Kitchen plate rack made of 0.63 mm thick stainless steel sheet 900 x 750 x 220 mm size fixing with wooden plug with shitable size of screws.

M&L incl preparation of new wood and wood based surfaces of any description, over 10cm in width or girth, not otherwise described and treating with two coats synthetic enamel paints over one coat of pink primer.

M&L incl preparation of new steel and iron Surfaces of any description, over 10cm in width or girth, not otherwise described and treating with two coats synthetic enamel paints over one coat of red oxide primer.

M&L preparation of new surface of wall and applying two coats of cement based paint.

M&L for treating one coat of cement based paint over old wall surfaces including prepration .

M&L, for preparation of old decorated surfaces of walls including brooming down or steel wire brushing, scrapping down smokes soot moulds, moss and efflorescent salts and trading oil and greasy spot and applying one coat of white wash.

All as per Item Srl No.70 above but on ceiling.

M&L for complete removal of existing treatment over wall and treating two coats of weather proof exterior emulsion (Apex of Asian paint or equivalent as approved) over one coat of wall putty .

Demolition of textile coverings including frames (if any) and cover fillets

Dismantling structural steel work including doors, gates but excluding framed truss etc.

Demolition of cement concrete (un-reinforced) in ground floors and pavings.

M & L Brick wk with sub class ‘B’ bricks straight or curved on plan exc. 6m means radius in CM 1:6

All as per item No 77 above but except bricks

Fixing only rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) ( item retrieved from sl item no 04 will be re-used)

S & F powder coated aluminium frame for doors, windows, ventilators with one or more rebates, including jointing cleat for fixing etc.

S & F powder coated aluminium door shutters, aluminium section weighing 0.55kg/M including necessary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, hinges, powder coated aluminium snap beading screws etc.

S&F 12mm thick toughned glass as in aluminium frame work including all necessary packing as per manufacturer instructions.

S&F door closer hydraulically regulated, designated No- 2 universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg aluminium (die cast) body.

S&F floor door stopper of brass body and tongue, anodised with hard drawn steel spring over all length of cover plate 140 mm complete all as specified and directed.

S&F anodised aluminum snap grid frame work of size 605 X 605 mm for false ceiling incl necessary notching. The snap grid shall consist of anodised aluminum main tee size 32 mm X 24 mm X 0.23-0.35 mm , cross tee of size and 26 mm X 24 mm X 0.23-0.35 mm and wall angle L-shaped 24mm x 24mm x 0.23-0.35 mm respectively. The snap grid frame work shall be fixed to ceiling with supporting hanger consisting of 3.15 mm dia galvanised wire or ‘J’ bolts with necessary bolts and nuts and washer with suitable arrangements.

M&L 4mm thick non asbestos fibre cement building board of size 600X600 as in ceiling over aluminium framework fixed in ceiling flat or sloping.

S&F 28-30 mm thick Factory made solid PVC moulded design door shutter with particle board core and 2mm thick moulded prelam PVC sheet on front and back face.

M&L cement concrete type D-2, 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete

M&L cement concrete type D-2, 1:4:8 (40 mm graded aggregate) 75 mm thick as in sub-base of floor

M&L 40 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring and finised the concrete surfaces even and smooth using extra cement

S&F 38mm Glass dividing strips 3mm thick inserted in position, conform to design

M & L, 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:6) surface finished even & smooth without using extra cement .

Cement concrete for sub-bases in floors 25mm thick type B-1, 1:2:4 (20mm graded aggregate)

M&L for 15mm thick screed bed or bedding layer of cement mortar in CM (1:6) for laying floor finishes.

Rendering 10mm thick on fair faces of brick work or concrete surfaces cement mortar in CM (1:6) fair & even for laying skirting, dado, and risers to steps etc.

M&L for Vitrified ceramic light coloured tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

All as per item 97 above but on vertical surfaces.

S&F in repair viterous china bowl urinal flat back, size of 465x355x265 mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) .

S&F 32 mm bore dia of dishcharge pipe Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms)

S&F 32mm High density polyethene pipes (HDPE) of pressure rating 6Kgf/cm2 fixed complete to walls, ceilings or in floors etc

S&F in repair vitreous china squating pan 'ORRISA' pattern, size 580X450mm white with integral foot rest and P or S trap complete including connection to trap and to anti syphonage pipe etc complete including making good to floor.

M & L for raking out cleaning and removing previously filled sealing compound by compressed air and drying the wet surface complete on runway slab including preparation of Expansion joints of size 10mm wide x 25mm to 40mm deep including priming the sides of joints with bituminous primer and sealing the joints by filling sealing compound grade `B' (Jet fuel resistant) as per IS 1834-1984 .

M&L for machine pressed rubber moulded precast cement concrete coloured interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade with grey cement and pigment laid over sand cushioning

M &L for Sand filling under floors or in foundations including watering and consolidation

M&L for PCC (1:2:4) type B-0 using 20mm graded stone aggegate as in coping etc (the rates include for use of formwork) .

M&L preparation of new surface of wall and applying two coats of weather proof exterior emulsion (Apex of Asian paint or equivalent as approved) over one coat of wall putty

M&L for treating one coats of synthetic enamel paint on old steel surfaces of any description over 10cm width or girth not otherwise described incl preparation of surface.

M & L for making lines, dashes, arrows, letters etc not exceeding 15 cm wide on bituminous/concrete pavement/path surface with retro reflective thermoplastic road marking paint with reflector sing glass beads @ 250 gms per sqm area confirming to MOST specification, not less than 1mm thick of white/golden/yellow as approved colour/shade and applied with machine, as per manufactures instructions including preparation of old painted surface.

Taking down carefully aluminium point wiring ant type including battens of any type except for ceiling or whre not feasible for light/fan/bell/socket or power and including unscrewing from board, fitting and fixure such as switches, socket, ceiling rose, lamp holder, pendants, bell, bell push, bracket and regulator etc and removing mateiral from site including making good disturbed surface to match with the existing surface complete all as specified

M&L point wiring with FRLS 1.5 Sqmm multi strand PVC insulated and unshedathed copper conductor cable in and including surface caping and casing complete with 1.60 mm thick Metal Boxes from 2 module to 12 module as required at site conceled in wall, paiting boxes inside and out side with one coat red oxide primer complete with all accessories and all as specified including fRLS 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor to common earth and connected to earth dolly for following (Make of cable/Wire : Havells/Finolex/Folycab/RPG/Plaza/HPL, Make of PVC of Casing/Caping : Finolex/Jindal/Modi/Asian/Sona

One light/fan/exhaust fan point controlled by one switch

One 5 pin 5 Am switch socket out let point on an independent board

One 5 pin 5 Amp socket out let point controlled by one switch on same board

One bell point controlled by one push bottom on the same board with other switches or independent with cable 1.5 Sqmm

All as per item No 2 above before but for one 15 Amp 6 Pin switch socket out let independent with 4 Sqmm FRLS including one run of 4 Sqmm copper conductor as earth continuity wire (Nominal Area) PVC unsheathed copper conductor single core multistranded complete all as specified:- (a) All wiring cable shall be multistranded FRLS copper conductor of approved make duly approved by accepting officer before incorporating in work. (b) Colour Code as per IS to be followed for wiring

S& F switch piano flush type 5/6 Amp single pole one way Make : Anchor/Legard/Havells (Crabtree)/HPL/C&S

S&F socket outlet 2 in 1, 3 pin, 5 Amp multipurpose, flush type, all as specified and as directed by EIC. Make : Anchor/Legard/Havells (Crabtree)/Cona/HPL

S&F switch socket combinations 6 pin 15 Amp Make : Anchor/Legard/Havells (Crabtree/Cona/HPL

S&F modular white cover plate with frame 2 module Make : Anchor/Legard/Havells (Crabtree)/HPL/C&S/SSK/Cona/Kay/Plaza/Leader

S&F modular white cover plate with frame 3 module Make : Anchor/Legard/Havells (Crabtree)/HPL/C&S/SSK/Cona/Kay/Plaza/Leader

S&F modular white cover plate with frame 4 module Make : Anchor/Legard/Havells (Crabtree)/HPL/C&S/SSK/Cona/Kay/Plaza/Leader

S&F modular white cover plate with frame 6 module Make : Anchor/Legard/Havells (Crabtree)/HPL/C&S/SSK/Cona/Kay/Plaza/Leader

S&F modular white cover plate with frame 8 module Make : Anchor/Havells/Plaza/ESS/Kay

M&L for lamp holder, insulated body with back plate batten/angle type for baten fittings complete all as spcd and directed Make :

S&F ceiling rose surface bakelite 65 x 50 mm three terminal AC 230 volts complete all as specified and directed Make : Anchor/Havells/Plaza/ESS/Kay

S&F for LED Tube light (Single side connection) with very high efficicency suited for installation give glare free cool day light 20W LED 0 with Regal batten for LED tube (single side connection) upto 1x20W LED tube efficient with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size

S&F inreplacement for surface mounting LED luminiares (Mirror light) suitble for 1 x 7 W white powder coated CRCA sheet steel housing with opal acrylic diffuser and decorative end plates Make : Crompton Anchor/Philips/Wipro/CG/GE/Havells/C&S

S&F bell push type 6A 1 module Make : Anchor/Legand/Havells (Crabtree)

S&F Bell multi music type, AC, 230 volts, single pole, all as specified and as directed Make : HPL/Anchor/Havells/Legarnd/C&S

S&F in replacement Delux fan regulator (Rotary step 80W) on the existing phenolix laminated sheet etc as required all as specified and as directed Make : Anchor/Havells/CG/Bajaj/Khatan/Almoard

S&F sheet metal enclosure of DBs for using MCBs single pole and neutral 4 way duble door with 200 amp rated bus bar 240v all as specified and directed

S&F sheet metal enclosure of DBs for using MCBs single pole and neutral 8 way duble door with 200 amp rated bus bar 240v all as specified and directed

S&F single pole and neutral 6-32 A, 240 V Make : HPL/Legrand/Havells/C&S/ABB/Indoasian/Hager/Anchor

S&F single pole and neutral 63 A, 240 V Make : HPL/Legrand/Havells/C&S/ABB/Indoasian/Hager/Anchor

S&F MCB Single pole 6-32 Amp Make :HPL/Legrand/Havells/C&S/ABB/Indoasian/Hager/Anchor

M&L Earthing complete with galvanized GI earth plate electrode of size 600x 600 x 6.00 mm, buried directly in gournd (earth pit not less than 2.25 mtrs below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, coonectedto galvanized earthe lead wire 4.00mm dia by means of bolts, nuts, check nuts of galvanized iron or steel including excavation and earth work in any type of soil, charcoal salt filling 15cm around the earth plate as shown in electrical plate no 3 of SSR Part-I 2004, 20mm bore, GI watering pipe medium grade 1.50 mtr long & GI protection pipe light grade 15mm dia from earth pit to main board including making pit with PCC 1:3:6 type C1 and pre cast RCC cover 40mm thick, reinforced with 8mm dia defromed bars @ 100mm c/c both ways with ligting handles and funnel etc including testing as directed

Supply and replacing 1100 volts grade heavy duty PVC insulated aluminium conductor, served with innner sheathing of OVC in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire, one twin core cable of size 10 Sqmm multi strand complete all as specified and directed Make : Havells/HPL

All as per item No 136 above but size 4 Sqmm twin core cable, Make : Havells/HPL

S&F in replacement of sub main wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper 100v grade conductor, single core cable in surface/recessed as required drawn in and including pVC conduit with all accessories such as saddles, screws etc, all as spd and directed

2 x 6.0 Sqmm + 1 x 4 Sqmm earth wire

2 x 4.0 Sqmm + 1 x 1.5 Sqmm earth wire

S&F in replacement PVC conduit 20mm

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp Make : Havells/HPL

BHARATI ENTERPRISES

M/S JAI MATA DEE CONTRUCTION CO.

india trading company

M/S ABDHESH CONSTRUCTION

Raj Construction

M/s Dwarika Nath Singh