NNT 2022-2023

Amount

Supply and erection of 8 Mtr. free standing double arm bracket 8 sided octagonally continuously tapered structured pole made up of HT sheet steel designed to withstand wind velocity as per IS – 875 hot dip galvanized both internally and externally confirming to BSEN: ISO 1461 (65 micro thickness) the octagonal pole shall be erected on the foundation concrete with foundation bolt M 24 x 700 mm 4Nos. and HT steel pole having a base plate of size 200 x 200 x 16 mm and suitable size door at the bottom with locking arrangements with following pole specification. Height of pole : 8000 mm Bottom dia : 130 mm Top dia : 70 mm Thickness of Pole : 3 mm Arm : Double Arm (Lenath - 1Mtr) with junction box housing 1No 4 way terminal block with Hylum sheet and 2Nos 6A SP MCB and supply and fixing of 2Nos 120W LED Street Light Fitting [Higher End Crompton/Philips/Wipro/Eq.] to be approved by PWD officials, with 20 Mtrs. of 3 Cx 2.5 sqmm PVC insulated copper cable from fuse box to the fitting, coil earthing complete and testing and commissioning [DATA-1]

Supply, erection, testing and commissioning of Three phase automatic street light controller of outdoor type housed in suitable size power coated enclourse made of sheet steel accommodating the following with necessary internal wiring with 10Sq.mm Unsheathed Copper wire. a) 63A four pole MCB=1 No (I/C) b)32A Four pole MCB=4 Nos (O/g) c) 24 Hrs Time switch (Timer) with Batter backup= 1 No d) 40A Three phase contactor with 230v coil =1No (MCB’s & Timer: Legrand/equivalent contactor L & T /Siemens/BCH the metal danger board shall be fixed at approximate location on suitable pedestal [MR]

Supply and fixing of brass cable gland for 4 x 16 sqmm PVC armoured LTUG cable with earth connection . [DATA-2 ]

Supply and laying of 4 x 16sq.mm PVC armoured LTUG cable in a existing trench in the earth to make good.[SR]

supply and laying of 4 x 16 sq.mm PVC armoured LTUG cable through 32mm dia GI pipe in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with sand and refilling the earth to make good by road crossing.[DATA-3]

Supply and clamping of 4 x 16 sqmm PVC LTUG armoured LTUG cable on post or on wall with MS clamps.[SD-221]

Supply and clamping of 4 x 16 sq.mm PVC LTUG armoured LTUG cable in through 32mm dia GI on wall or post with Ms clamps.[DATA-4]

Supply and providing cable end termination of 4 x 16 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete .[DATA-5]

Supply and fixing of TNEB meter board housing inside the powder coated box of size 1Mtr. X 0.60mtr. x 0.30mtr with lock and key arrangements suitable for 3 phases 63A service connection made up of suitable angle iron frame work of size 2 feet x 1 ½ feet using angle iron of size 1 ½ “ x 1 ½” x ¼ “ rigidly fixed on wall covered with Hylum sheet of size 2 feet x ½ of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 63A fuse units (500V) 1No. Neutral link, copper earth flat of size 1” x ¼” with inter connection of EB meter to fuse units by 7/16 PVC insulated copper wire with earth connection complete.(DATA-6)

Supply and fixing of 3 Nos. of 3 phase 63 A aerial fuse unit (500V) on suitable MS sheet covered with 6mm thick hylum sheet on suitable angle iron frame work the tapping pole with necessary clamps. (DATA-7)

Supply and fixing of brass cable gland for 3½ x 25 sqmm PVC armoured LTUG cable with earth connection. [SD-186]

Supply and laying of 3 ½ x 25 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.[SD-204]

Supply and clamping of 3 ½ x 25 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps.[SD-222]

Supply and providing cable end termination of 3½ x 25 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete [SD-235]

Earthing as per the ISI specification with an earth electrode of class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 300mm x 300mm x 3mm base plate duly welded at the bottom of the GI pipe and 25mm x 3mm copper flat of length 2.25mtrs is fixed from bottom base plate to top earth link parallel to GI pipe with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.[DATA-8]

Supply and Run of 1 of No.8 Hard Drawn copper wire in suitable PVC rigid pipe concealed in wall or ceiling and making good of the concealed portion with suitable colour.[DATA- 9 ]

Restoring the cutting open at the Berm of the road within 2.50m from BT edge For SH,MDR & ODR [Department Rate]

Supply and Run of HDPE pipe 76mm in suitable on exisitng trench to concealed portion.[SR]

SCHNELL ENERGY EQUIPMENTS PVT LTD