Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.6 LAccepted-AOC | L1 | Accepted-AOC Lowest tenderer | |
| 2 | L2₹25.8 L+₹2.1 L (8.96%)Rejected-Finance 96 1 HIMMATGANJ BEHIND UNANI MEDICAL COLLEGE PRAYAGRAJ 211001 | PRAYAGRAJ | UTTAR PRADESH | 211001 | L2 | Rejected-Finance Other than lowest quoted tenderer | |
| 3 | L3₹28.5 L+₹4.8 L (20.1%)Rejected-Finance | L3 | Rejected-Finance Other than lowest quoted tenderer | |
| 4 | L4₹29.0 L+₹5.3 L (22.2%)Rejected-Finance | L4 | Rejected-Finance Other than lowest quoted tenderer | |
| 5 | L5₹29.9 L+₹6.2 L (26.0%)Rejected-Finance B 39 UPPER GROUND FATEH NAGAR NEW DELHI 110018 | WEST | DELHI | 110018 | L5 | Rejected-Finance Other than lowest quoted tenderer |
Tender Value
₹39.9 L
EMD Value
₹79,700
Closing Date
27 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE Prayagraj
HQ CWE New Cantt Prayagraj
REPAIR / MAINT OF PIPE LINES AND OTHER CONNECTED ITEMS AT OLD CANTT AND FORT CANTT UNDER GE (EAST) PRAYAGRAJ..
2024_MES_648596_1
81828/E/E8
Open Tender
Civil Works
Item Rate
180 days
Prayagraj
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE (East) Prayagraj
₹79,700
Yes
10 Jul 2024
30 Mar 2024
4 May 2024
31 Mar 2024
27 Apr 2024
13 Apr 2024
Amount
Excavation in trenches in soft/loose soil n. exc. 1.5 mtr deep and not exceeding 1.5 mtr in width for taking up/down underground water tubing and/or laying of CI/GI pipes (new or old) of any dia and getting out complete all as specified and as directed.
Excavation in trenches in hard & dense soil (in Road cutting / plinth) soil n. exc. 1.5 mtr deep and not exceeding 1.5 mtr in width for taking up/down underground water tubing and/or laying of CI/GI pipes (new or old) of any dia and getting out complete all as specified and as directed.
Removal of surplus soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr from starting point complete all as specified and as directed.
Returning filling in including spreading, levelling watering and well ramming in layers not exceeding 25 cm thick in any type of soil after the existing water pipe lines have been taken up/out and new existing pipe line laid and tested complete all as specified and directed.
Taking up or down old steel tubing 15 mm bore and connections from trench/floor/along wall including cleaning for refixing or removal from site complete all as specified and directed.(excavation and earth work shall be measured and paid for separately).
Taking up or down old steel tubing 20 mm bore and connections from trench/floor/along wall including cleaning for refixing or removal from site complete all as specified and directed.(excavation and earth work shall be measured and paid for separately).
Taking up or down old steel tubing 25 mm bore and connections from trench/floor/along wall including cleaning for refixing or removal from site complete all as specified and directed.(excavation and earth work shall be measured and paid for separately).
Taking up or down old steel tubing 40 mm bore and connections from trench/floor/along wall including cleaning for refixing or removal from site complete all as specified and directed.(excavation and earth work shall be measured and paid for separately).
Taking up or down old steel tubing 50 mm bore and connections from trench/floor/along wall including cleaning for refixing or removal from site complete all as specified and directed.(excavation and earth work shall be measured and paid for separately).
Taking up or down old steel tubing 80 mm bore and connections from trench/floor/along wall including cleaning for refixing or removal from site complete all as specified and directed.(excavation and earth work shall be measured and paid for separately).
Laying only, jointing and testing galvanized iron tubes 15 mm bore with all new fittings, laid in trenches complete all as specified and directed. (excavation and earth work shall be measured and paid fpr separately) (Old GI tubing obtained from item No. 5 shall be used in this item)
Laying only, jointing and testing galvanized iron tubes 20 mm bore with all new fittings, laid in trenches complete all as specified and directed. (excavation and earth work shall be measured and paid fpr separately) (Old GI tubing obtained from item No. 06 shall be used in this item)
Laying only, jointing and testing galvanized iron tubes 25 mm bore with all new fittings, laid in trenches complete all as specified and directed. (excavation and earth work shall be measured and paid fpr separately) (Old GI tubing obtained from item No. 07 shall be used in this item)
Laying only, jointing and testing galvanized iron tubes 40 mm bore with all new fittings, laid in trenches complete all as specified and directed. (excavation and earth work shall be measured and paid fpr separately) (Old GI tubing obtained from item No. 08 shall be used in this item)
Laying only, jointing and testing galvanized iron tubes 50 mm bore with all new fittings, laid in trenches complete all as specified and directed. (excavation and earth work shall be measured and paid fpr separately) (Old GI tubing obtained from item No. 09 shall be used in this item)
Laying only, jointing and testing galvanized iron tubes 80 mm bore with all new fittings, laid in trenches complete all as specified and directed. (excavation and earth work shall be measured and paid fpr separately) (Old GI tubing obtained from item No. 10 shall be used in this item)
Supply, Laying, jointing and testing galvanized iron tubes 15 mm bore medium grade with all fittings confirming to IS-1239, laid in trenches or alongwall or roofs and in floors etc complete all as specified and as directed (excavation and earth work shall be measured and paid for separately)
Supply, Laying, jointing and testing galvanized iron tubes 20 mm bore medium grade with all fittings confirming to IS-1239, laid in trenches or alongwall or roofs and in floors etc complete all as specified and as directed (excavation and earth work shall be measured and paid for separately)
Supply, Laying, jointing and testing galvanized iron tubes 25 mm bore medium grade with all fittings confirming to IS-1239, laid in trenches or alongwall or roofs and in floors etc complete all as specified and as directed (excavation and earth work shall be measured and paid for separately)
Supply, Laying, jointing and testing galvanized iron tubes 40 mm bore medium grade with all fittings confirming to IS-1239, laid in trenches or alongwall or roofs and in floors etc complete all as specified and as directed (excavation and earth work shall be measured and paid for separately)
Supply, Laying, jointing and testing galvanized iron tubes 50 mm bore medium grade with all fittings confirming to IS-1239, laid in trenches or alongwall or roofs and in floors etc complete all as specified and as directed (excavation and earth work shall be measured and paid for separately)
Supply, Laying, jointing and testing galvanized iron tubes 80 mm bore medium grade with all fittings confirming to IS-1239, laid in trenches or alongwall or roofs and in floors etc complete all as specified and as directed (excavation and earth work shall be measured and paid for separately)
Taking up from trench old cast iron pipe 80 mm bore of any class & length (including all fittings) including disconnecting pipes & fittings including burning out joints and recovering lead for reuse in CI/DI pipe by using new spun yarn and extra lead for jointing material and stacking for measurement including cleaning for refixing or removal from site complete all as specified and as directed. (excavation and earth work shall be measured and paid for separately).
Description same as per srl item No. 23.00 herein before but CI/DI pipe of size 100 mm bore complete all as specified and directed.
Description same as per srl item No. 23.00 herein before but CI/DI pipe of size 150 mm bore complete all as specified and directed.
Description same as per srl item No. 23.00 herein before but CI/DI pipe of size 200mm bore complete all as specified and directed.
M&L for Laying, jointing and testing DI(Ductile Iron) pipe 80 mm bore with spigot & socket ends (ISI Marked) centrifugally cast of class K-9 and in any length, laid in trenches complete all as specified and as directed (excavation and earth work, cast iron fittings or special for spigot and socketed shall be measured and paid for separately)As per IS-1536.
Description same as per srl item No. 27.00 herein before but CI pipe of size 100 mm bore.
M&L for Laying, jointing and testing DI (Ductile Iron) pipe 150 mm bore with Spigot and socket ends (ISI Marked) centrifugally cast of class A and in any length, laid in trenches complete all as specified and as directed (excavation and earth work, cast iron fittings or special for spigot and socketed shall be measured and paid for separately).
Description same as per srl item No. 29.00 herein before but DI pipe of size 200 mm bore.
Laying only, jointing and testing cast iron pipe 80 mm bore with spigot & socket ends/ flanged ends centrifugally cast of any class and in any length, laid in trenches complete all as specified and as directed (excavation and earth work, cast iron fittings or special for spigot and socketed shall be measured and paid for separately).(old CI pipe obtained from item No. 23 shall be used in this item)
Description same as per srl item No. 31.00 herein before but CI pipe of size 100 mm bore.(Old CI pipe obtained from item No. 24 shall be used in this item)
Description same as per srl item No. 31.00 herein before but CI pipe of size 150 mm bore.(Old CI pipe obtained from item No. 25 shall be used in this item)
Description same as per srl item No. 31.00 herein before but CI pipe of size 200 mm bore.(Old CI pipe obtained from item No. 26 shall be used in this item)
M&L for replacement of gun metal gate valve ISI Marked with iron wheel 15 mm bore complete with necessary fittings as required at site complete all as specified and as directed.
Description same as per srl item No. 35.00 herein before but size of gun metal gate valve 20 mm bore.
Description same as per srl item No. 35.00 herein before but size of gun metal gate valve 25 mm bore.
Description same as per srl item No. 35.00 herein before but size of gun metal gate valve 40 mm bore.
Description same as per srl item No. 35.00 herein before but size of gun metal gate valve 50 mm bore.
Disconnecting and taking down existing unserviceable sluice valve 80 mm bore from pipe line including flanged joints fittings and removing from site complete all as specified and directed.
Description same as per srl item No. 40.00 herein before but size of sluice valve 100 mm bore.
Description same as per srl item No. 40.00 herein before but size of sluice valve 150 mm bore.
Description same as per srl item No. 40.00 herein before but size of sluice valve 200 mm bore.
Supply, laying and jointing cast iron sluice valve of class PN-1.6, IS-14846 marked 80 mm bore with steel spindle, & cast iron wheel having both flanged and drilled ends including rubber gasket, nut bolt and washer heavy duty 16mm dia etc complete all as specified and directed. Make ;- Kirloskar/ BIR/IVC
Description same as per srl item No. 44.00 herein before but PN 1.6, size of sluice valve 100 mm bore.
Description same as per srl item No. 44.00 herein before but PN 1.6 size of sluice valve 150 mm bore.
Description same as per srl item No. 44.00 herein before but PN 1.6 size of sluice valve 200 mm bore
M&L cast iron fittings or specials for flanged / spigot socketed end pipe upto 150 mm bore conforming to IS-1538 and ISI marked such as bends , tapers, tee pieces (single & double branch) any type, and angle/radios amd Straight connecting pieces but all ends flanged complete (joints, excavation and earth work shall be measured and paid separately)
M&L cast iron fittings or specials for flanged / spigot socketed end pipe from 200 to 300 mm bore conforming to IS-1538 and ISI marked such as connecting pieces and end flanged and other socket or spigot and bell muth pieces one end flanged other end tapering as bell mouth (joints, excavation and earth work shall be measured and paid separately)
Taking out unsv mild steel covers of valve chambers and supply and fixing covers of valve chambers duly hinged fabricating the frame by using 3.15mm thick mild steel sheet and angle iron of size 40 mm X 40 mm X 6 mm thick including making locking arrangement and fixing the above cover in PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate and providing hold fast of appropriate size made to shape of 50mm x 6mm mild steel flat including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Demolition of brick work built in cement mortar including all arches, pillars etc and removal of brick bats from site and rubbish to a distance n.exc 100 mtr complete all as specified and directed by Engineer-in-Charge.
Demolition of cement concrete (un reinforced) as in foundation not exc 15cm thick(below or above ground level) of old foundation of valve chambers and coping etc and removal of rubbish to a distance n.exc 100mtre complete all as specified and directed by Engineer-in-Charge.
M&L for plain cement concrete 1:3:6 type C-2 using 40mm graded mechanically crushed stone aggregate as in foundation including necessary form work all as specified and directed by Engineer-in-Charge.
M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded mechanically crushed stone aggregate as in coping including necessary form work & finishing the surface even and smooth without using extra cement complete all as specified and directed .
M&L brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius using old size bricks in cement mortar 1:4 for supports to pipes and repair to valve chambers complete all as specified and directed.
M&L for plastering 10mm thick in cement mortar 1:4 on fair faces of brick or concrete walls of any description, surfaces finishing surfaces even and smooth without using extra cement complete all as specifed and directe.
M&L for plain cement concrete 1:2:4 type B-2 using 40mm graded mechanically crushed stone aggregate 100mm thick as in road cutting including necessary form work & finishing the surface even and smooth without using extra cement complete all as specified and directed .
M&L for cutting cast iron 100 mm bore pipes for insertion of new tees, branch and reducing to required length complete all as specified (Both sides cut shall be measured as one unit)
Description same as per srl item No. 58.00 herein before but size of CI pipes 150 mm bore
Description same as per srl item No.58.00 herein before but size of CI pipes 200 mm bore
M&L for run lead joint for 80 mm bore cast iron pipe and fittings including material like lead, spun yarn, caulking etc complete all as specified.in new pipes / in leaking joints including dewatering the trenches/ pits where ever required
Description same as per srl item No. 61.00 here-in-before but size of CI pipe & fittings 100 mm bore.
Description same as per srl item No.61.00 here-in-before but size of CI pipe & fittings 150mm bore.
Description same as per srl item No. 61.00 here-in-before but size of CI pipe & fittings 200 mm bore.
Taking out reflex valve 100 mm bore (non return valve) cast iron body, flanged ends from trenches complete all as specified and directed.
Description same as per srl item No. 65.00 herein before but size of non return valve 150 mm bore.
Description same as per srl item No. 65.00 herein before but size of non return valve 200 mm bore.
S&F reflex valve 100 mm dia non return valve cast iron body, flanged ends, including making flanged joints using nuts, bolts & washers gasket complete all as specified and directed.
Description same as per srl item No. 68.00 herein before but size of non return valve 150 mmdia bore.
Description same as per srl item No. 68.00 herein before but size of non return valve 200 mmdia bore.
S&F replacement of check nut & Spindle of any type of sluice valve of size 80 mm bore as existing pattern complete all as specified and as directed.
Description same as per srl item No. 71.00 here-in-before but size of check nut 100 mm bore.
Description same as per srl item No. 71.00 here-in-before but size of check nut 150 mm bore.
Description same as per srl item No. 71.00 here-in-before but size of check nut 200 mm bore
Construction of brick masonary valve pit chamber of size 1050 mm x 1050 mm x 1050 mm (internal dimension) including necessary excavation and earthwork in soft/ loose soil, foundation bed concrete 150 mm thick PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate projected by 150mm all around from the outer face of brick wall including PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) in coping , brick work in one brick thick wall build in cement sand motar 1:4, 15mm thick rendering in cement sand mortar 1:4 on internal surface & top of valve pit upto 150 mm external surface, mild steel sheet cover 3 mm thick and mild steel sheet fitted in angle iron frame size 40mm x 40mm x 6mm around of valve pit, locking arrangement with pad lock of size 50 mm steel 6 leaver with double keys of make ; Godrej / Link or Harrision locks complete including two coats of synthetic enamel paint over one coat of red oxide primer on steel surface, complete including demolition of old valvepit as specified & directed.
Construction of brick masonary valve pit chamber of size 900 mm x 900 mm x 900 mm (internal dimension) including necessary excavation and earthwork in soft/ loose soil, foundation bed concrete 150 mm thick PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate projected by 150mm all around from the outer face of brick wall including PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) in coping , brick work in one brick thick wall build in cement sand motar 1:4, 15mm thick rendering in cement sand mortar 1:4 on internal surface & top of valve pit upto 150 mm external surface, mild steel sheet cover 3 mm thick and mild steel sheet fitted in angle iron frame size 40mm x 40mm x 6mm around of valve pit, locking arrangement with pad lock of size 50 mm steel 6 leaver with double keys of make ; Godrej / Link or Harrision locks complete including two coats of synthetic enamel paint over one coat of red oxide primer on steel surface, complete including demolition of old valve pit as specified & directed.
Supply and fixing (in repair) Ball brass valves, high pressure, with polythene float and flynut complete 15 mm dia bore screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed
Supply and fixing (in repair) Ball brass valves, high pressure, with polythene float and flynut complete 20 mm dia bore screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed
Supply and fixing (in repair) Bib taps, cast copper alloy with cruntch or butterfly handle, screwed down , screwed for iron pipe or for brass ferrule and fixed of 15 mm bore dia pipe complete all as specified and as directed
M&L for tighten/rubber gasket joint for 80 mm bore DI (Ductile Iron) pipe and fittings etc complete all as specified.in new pipes / in leaking joints including dewatering the trenches/ pits where ever required
All as per item No. 80.00 here-in-before but size of pipe 100 mm bore.
All as per item No. 80.00 here-in-before but size of pipe 150 mm bore.
All as per item No. 80.00 here-in-before but size of pipe 200 mm bore.
M&L for detecting faults such as no water supply, leakage,block, broken ..etc in external water supply distribution system in pump houses/Md Accn/OTM in the NAA and rectifiying the defects in any type of pipe and joints for water supply system including replacing of unserviciable defective water supply accessories and complete all as specified & directed. Note :- (i) Spares shall be measured and paid under respective item of schedule . (ii) Essential material like, complain slip book,Tubing Cutter ,Hacksaw ,Hole saw kit ,Pipe and tube benders Mole grips ,Thread sealing tape,Pliers ,Press fitting systems,Ratcheting pipe threader set,Pipe wrench, Adjustable wrench to the defect fault shall be deemed to be included in the quoted rate.
Collecting sample of water in sample bottles and testing of water sample in different pockets of Old Cantt area Allahabad, in respect of the following parameters, to get it tested from State Public health laboratory or NABL Accredited Lab, complete all as specified and directed . Note : The parameter to be tested as per IS :10500-2012 : shall be Colour, Odour, tubidity, Ph value, Total dissolved solids, Aluminium, Ammonia, detergents, Barium, Boron, Calcium, Chlormines, Chloride, Copper Fluoride, Free Residual chlorine, Iron , Magnesium, Manganese , Mineral Oil, Nitrates, Silver, Sulphate, Sulphide.
Servicing to chlorine dosing pump with electro chlorination batch type of capcity 230 litre in 8 hours comprising of storage tank, re-action tank, Electrolizer Cell, Electrode, Chemical resistance pump and wall mounted control panel, complete all as specified and directed. Make of plant : PristineWater Note : Servicing shell be carried out by authorised distributer or manufacturer of the said dosing system. A certificate to be produced in original from distributer/manufacturer after completion of spedifeid work. Items/Spares required to make the system functional will be measured and paid separartely as supply only items separartely work respective item of this schedule.
Supply only SMPS (Switch Mode Power Supply) suitable for input range 100-120 AC supply at 17.5 Amp and 200-240 V AC at 10 A, 50Hz and out put at L.C. + 12 Volt at 83.3 Amps, Model No. SE-1000-12 of make- Mean well enterprises Co. Ltd or Techno Commercial or equivalent make as suitable for above supply, complete all as specified and directed.
Supply only Electrolyzer Cell -100 GPH, complete all as specified and directed
Supply only Reaction Tank 140 litre, complete all as specified and directed
Supply only digital Timer, complete all as specified and directed.
Supply only chlorine test kit with coloured ample, testing tube and OT soultion with rexene finish box, complete all as specified and directed. Make : T&C /Purichlor/Aquapura
Supply only OT soluiton for testing of water sample, complete all as specified and directed. Make : T &C /Purichlor/Aquapura
Servicing of dosing agitator gear box by unscrewing foundation nuts & bolts, Strip oening of gear box & supply and replacing the worn out spares as given below and re-assembling the same after servicing/repair and fixing at site and testing on completing complete all as specified and directed :- (i)Chemical Oil Seal (ii)'O' ring (iii)Gear shifter (iv)Servicing of gears (v)Replacement og Gear oil No. 460 (vi)Servicing of doser shifter Note: Servicing to be carried out by authorised distributor or manufacturer of the said dosing system. Acertificate to be produced in original from distributor / manufacturer after satisfactorily completion of specified works.
Supply & fixing in repair commissioning & testing complete of DIGITAL WATER LEVEL INDICATION DEVICE, operating on single phase supply direct display in 19 mm size digital system in meter or cm of water over head tank ensuring alarm while water fall or rise over pre-determined limit with the following description : the entire unit must operate through a compact electronic circuit, which must ensure reliable operation at 230 Volt + 5% with reliable in digit display and alarm at low and high level or over head tank complete as directed by Engineer-in-Charge. Make : SECO type DDS-2 / Surya / Akash / Phototron.
Supply & Fixing in repair PVC Insulated FR PVC round sheathed copper conductor multi-stranded round flexible cable 1100 volts with bright annealed electrolytic base copper conductor size 0.5 Sqmm 4 core confirming to IS : 694-1990 making necessary electric connection to water level indicator complete all as specified & directed.
M/S SHIV BALLABH MISHRA
vs construction
VIKAS INDIA ENTERPRISES
ABHISHEK ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .