Maintenance and Repairing works in resi No. 18/1 at Canal Colony, Cantt Road, Lucknow.

Amount

Dismantling existing plaster including disposal of refuse as directed by the Engineer- in- charge within a distance of 60 m.

12mm cement plaster in single coat on rough side of single/ half brick wall for interior/ exterior plastering in singl;e storey building finished even & smooth 1 cement : 4 coarse sand including all L/M, T&P etc.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Scraping old white or colour wash including disposal of refuse as directed by Engineer-in-charge with in a distance of 60m.

One priming coat and two coat oil bound distemper including supply of all materials, labour and T&P etc.required for proper completion of work.

Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32mm C.P. brass waste of standard pattern including cutting & making good the walls wherever required.a) Flat back wash Basin size 550x400 mm with single 15mm C.P. brass pillar tap.

Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete.a) 32mm dia

Providing & fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick asbestos cement sheet ground fixed to wooden cleats with C.P. brass screws and washers.

P/F Stainless steel ISI 304(18/18) Kitchen sink as per IS 13983 with CI bracket, stainless steel plug 40 mm including painting the fitting & the bracket, cutting & making good the walls whrerever required kithchen sink with drain board of size 510x1040x200 mm

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.

P/F C.P. brass Soap Dish with C.P. brass brackets fixed to wooden plugs plastic sleeves with C.P. brass screws.

Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions.a) 15mm nominal bore

Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 a) 15mm nominal bore

Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.a) 15mm nominal bore

Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 a) 15mm nominal bore

P/F ball valve ( brass) of approvd quality complete ( high or low pressure with plastic flote) a - 25 m Nominal bore

Providing and fixing gun metal gate valve with wheel of approved quality.a) 25mm dia nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 500 Ltrs

Providing & fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS : 8931.a) 15mm nominal bore

Providing & fixing C.P. brass shower rose with 15 or 20mm inlet a) 100mm

Providing and fixing C.P. Stop Cock of approved Quality a-15 mm Nominal size

Painting or varnishing on iron work in small areas or new wood work with one coat of ready mixed priming paint & two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials ,labour, T&P etc required for proper completion of work .(Paint to be used should conform to the ISI no -103-1950.)

P/F C.P. jali for Nahani Trap 100 mm dia including cost of all m/aterail

Providing and fixing aluminium hanging floor door stopper, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Factory made 35 mm thick shutters with laminated veneer lumber styles & rails as per TADS 15:1995 and panels of 12 mm thick both sides prelaminated type-I, medium density flat pressed three layer, graded particle board (FPT-I) as per IS:3087 bonded with BWP type synthetic resin adhesive,

M/S MOHD JAVED