PROVN OF TRG SHED AT 17 ASSAM, VEHICLE PARKING AT BHAGAT LINE AND COMPLAINT CELL OF AGE BR I UNDER GE WEST LUCKNOW

Amount

Surface dressing in soft/loose soil n. exc 15cm deep and getting out in complete all as specified and as directed.

Excavating in trenches in soft/loose soil, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Use and Waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat rough finish surface of concrete complete all as specified and as directed.

M&L for RCC design Mix, M-25 (20mm graded stone aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

Use and Waste Formwork to sides of pillars, posts, struts, piers, columns and stanchions for square, rectangular or polygon rough finished surface of concrete complete all as specified and as directed.

M&L for RCC design Mix, M-25 (20mm graded stone aggregate) in Columns, pillars, piers, posts and struts complete all as specified and directed.

Use and Waste Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.

M&L for RCC design Mix, M-25 (20mm graded stone aggregate) in Roof Beams, lintel bands, cantilevers etc complete all as specified and directed.

Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and as directed.

Use and waste Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed.

M&L for RCC design Mix, M-25 (20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Ditto all as per item no 13 above but 6mm to 8mm dia

Ditto all as per item no 13 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

M&L for hard core of broken stone or boulders of gauge not exceeding 63mm, deposited, spread and leveled in layers not exceeding 15cm thick, watered and rammed to a true surface complete including filling interstices with and including approved fine materials complete all as specified and directed.

M&L for 75 mm thick Cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate as in sub base of floor etc. complete all as specified.

M&L for 15 mm thick rendering in CM 1:4 using WPC @ 3% by weight of cement on fair faces of brick wall or concrete surfaces finished fair and even complete all as specified and directed. (Note :- WPC shall be measured and paid seperatelly)

Supply only Integral water proofing compound confirming to IS-2645-2003of approved. Make- Impermo/ Waterseal/ Accoproof/ ACC

M&L for 10 mm thick rendering in CM (1:6 ) on other than fair faces of brick wall or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10 mm thick rendering in CM (1:3 ) on ceiling finished even and smooth without using extra cement complete all as specified and directed.

S&F Powder coated Anodised aluminium three track sliding type glazed window shutter with 5mm thick plain sheet glass fixed open track section 100x38x1.5mm having three track (two of glass & one of stainless steel wirecloth of 0.36mm nominal dia of wire and average width of aparture 1.40mm) with members of window shutters of section 38x12x1.5mm and other standard Bombay sliding section incl all necessary fiber wheel rollers suitable handle to facilitate sliding and all necessary jointing cleats glazing clips,rubber packing, Aluminium snap beading etc all as specified and directed.

S&F Anodised aluminium door frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and directed.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F sheet glass 5.5mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares exc 0.5 sqm in each pane complete all as specified and directed.

S&F Brass Mortice lock with two levers vertical type, size 75mm complete all as specified and directed.

S&F Pressed steel door frames 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, supplied and fixed complete all as specified and directed.

M&L PCC 1:3:6 type C-0 (using 12.5 mm graded stone aggregate) for filling in pressed steel frame etc, rounded or chamfered on edges complete all as specified and directed.

S&F 30mm thick flush shutter, solid core construction with block board core and ply wood panels commercial type on both side complete all as specified and directed.

S&F Mild steel framed work such as grills, grating, framed guard bars and similar work conforming to Fe 290 Gde E -165 complete all as specified and directed. .

S&F 200mm long alumunium anodised barrel tower bolts of extructed section complete all as directed and directed.

S&F alumunium handle, fabricated type, anodised 150 mm long complete all as specified and directed.

S&F aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as directed and directed.

M&L for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified.

M&L for preparation of new surface of wall and applying one coat of 1mm thick birla /JK wall care putty all as specified and directed.

M&L for preparation wall surfaces and applying two coats of oil bound distemper complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying two coat of oil bound distemper complete all as specified and directed.

M&L for Makrana white marble flooring 20mm thick over 15mm thick screed bed in CM 1:6 machine cut, bedded, jointed and pointed with grey cement slurry including cutting ,rubbing and polishing complete all as specified and directed.

M&L for 18-20mm thick Makrana white marble as in skirting/dados/ walls etc, set & jointed in neat cement slurry and pointed in white or colours cement to match over and including10mm thick backing coat in CM 1:4 all as specified and directed.

M&L Duracrete cement concrete tiles 300x300x20mm thick in path set jointed and pointed in neat cement slurry with grey cement and pigment over and included 15mm thick screed bed or bedding layer of mortar with CM 1:4 complete all as specified and directed.

S&F Stainless Steel pipes of 304 grade of square/ tubular section and thickness 1.5mm (minimum) as in railing,hand rail,baluster etc and fixed at spacing not more than 1200mm with D button on baluster incl bottom flange including cutting,welding drilling holes in existing floor or welding ends on existing RCC columns complete all as specified and directed. (Note- Size/ pattern of Stainless Steel sections shall be appoved by GE)

Returning filling in including spreading watering and well raming in layer excedding 25 cm each in soil complete all as specified and directed.

Earth filling under floors or pavings, received from excavation laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and directed. (Note- Material received from item No. 02 Excavation in trenches)

Removing excavated soil to a distance not excedding 50m and deposited where directed at a level not excedding 1.5m above the starting point.

Excavation post holes (or similar holes) each n.exc 0.5 cum getting out returing filling in and ramming earth on broken rubble mixed with earth arround in layers not exceeding 25 cm thick in soft/loose soil making good complete all as specified and directed.

M&L structural Steel work in tubular trusses including special shaped washer etc complete using one or more tubes or induction butt welded tubes conforming to IS:1161-1979 grade St.-240 complete all as specified and directed.

M&L structural Steel work in tubular stanchion/post including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS:1161-1979 grade St.-240 complete all as specified.

M&L Steel work in plates (plain or chequered) channels, square cut to notched 9 ordinary or ciunter sunk) forming holes, without any attachment etc complete using tubes conforming to Fe-290 grade E-165 complete all as specified.

M&L pre-painted galvalume aluminium zinc coated galvanised Iron based corrugated steel sheeting 0.5 mm thick, with side lap and end lap of any colour having tensile strength 550 MPA ridges, hips, valley gutters, drip and straight flashing or in roof covering fixed with self taping screws (length & girth as fixed) complete all as specified and directed.

M&L pre-painted galvalume aluminium zinc coated galvanised Iron based plain steel sheeting 0.5 mm thick, with side lap and end lap of any colour having tensile strength 550 MPA ridges, hips, valley gutters, drip and straight flashing or in roof covering fixed with self taping screws (length & girth as fixed) complete all as specified and directed.

M&L 18 to 20 mm thick Granite of any type machine cut bedded and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite stone including cutting and polishing laid over 15 mm screed bed n CM (1:4) as in flooring, counter etc complete all as specified and directed

M&L for machine cut kota stone slab as in flooring 18 to 22 mm thick, laid over cement screed 20 mm thick in CM 1:4 base laid and jointed with grey cement slurry mixed with pigment to match the stone including rubbing and mirror polishing complete all as specified and directed

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.

M&L 100mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in floor/ sub base etc. complete all as specified and directed

M&L machine pressed RUBBER MOULDED precast concrete interlockning paver blocks any shape and size of 80mm thickness, M-40 grade with gray cement and pigment and joint filled with fine sand including levelling, tamping and sweeping etc complete all as specified and directed.

M&L Rendering 15 mm thick on fair faces of brick wall or concrete surfaces in CM 1:6 including finishing the surface even and smooth without using extra cement including taking out existing plaster complete all as specified and directed

M&L for two coats of cement base paint over one coat of primer on newly plastered surfaces of wall including preparation of surfaces complete all as specified and directed.

M&L sand cushioning of 25mm thick below paver blocks complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggreagate) as in benching/ coping etc. including necessary formwork complete all as specified and directed.

M&L continuous brick edging with width equal to depth of brick, laid dry on edge using old size sub class 'B' complete all as specified and directed.

M&L Point wiring complete with 1.5 sqmm PVC insulated stranded, FRLS, copper conductor, single core cable drawn through and including rigid non metalic PVC conduit not less than 20 mm dia, ISI marked with concealed conduit wiring including cutting chases and making surface good to match, pressed GI terminal boxes not less than 1.6 mm thick concealed in wall, PVC laminated top sheet cover 3 mm thick (preferably Hylem brand) of required size and colour for housing switches and sockets etc and 1.5 sqmm PVC insulated stranded, FRLS, copper conductor, single core cable for earth continuity drawn with wiring and connected to common earth dolly all as specified. (a) One light/ fan point controlled by one switch

(b) All as per item no. 63 but for One socket outlet point 5 Amp on an independent board

(c) All as per item no. 63 but on same board

All as item no 63 herein before but using 2.5 sqmm , PVC insulated, stranded copper conductor single core cable for one 3 pin 15 Amp socket out let point on an independent board.

S&F switch piano flush button single pole one way 5 Amp 240 volt complete as directed.

Ditto as item 67 but using 15 Amps

S&F socket outlet flush type multipurpose 2 in 1 , 6 pin 5 and 15 Amp, 230 volts complete as directed.

S&F socket outlet flush type 5 pin 5 Amps 240 volts complete as directed

S&F ceiling rose surface bakelight to three terminal complete as directed

S&F in fan regulator electronic, step type, SP, 230 volt and conection complete all as directed

S&F sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete as directed.

S&F MCB single pole 6 to 32 Amp 240 volts 10 KA breaking capacity complete as directed.

Ditto as item No 74 herein before but 40 Amp, 240 volts, single pole & neutral complete as directed.

S&F sheet metal enclosure (MCB DB) single phase and neutral with 200 Amps rated bus bar 8 way double door type, 240 volts complete as directed.

M&L for Sub main wiring with two single core PVC insulated (FRLS) cable with 4 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete. (Note-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate)

Supply and fixing LED batten box type 18/20 W, 4 feet complete standard fittings and fixtures including fixing on walls/roofs with fitting arrangement complete all as Havell's/Crompton Greaves/C&S/Surya

Supply and fixing ultra bright crystal LED tubelight 18/20 W, 6000 k with high efficency,Single side connection 4 feet size with fitting arrangement complete all as specified and directed. Make: Havells/ CG/ C&S/ Philips/ Surya

S&F LED downlighter 2'X2', 6000 K, 230 volts surface type to be fixed with all fitting arrangements at any height all as directed

S&F ceiling fan 1200mm sweep,single phase 230V AC, complete all as specified and directed. Make: Orient/ Havells/CG/ Usha

Supply and fixing security light fitting of 45 W LED 6000 K fitting with all accessories, prewired with and including one No. bracket of GI pipe light grade, 32mm bore, 1 mtr long bend in required shape, MS clamp 40x3mm thick duly painted with two coats of synthetic enemal paint fixed on wall including bolts and nuts complete all as specified and as directed. Make: Havells/ CG/ C&S/ Philips/ Surya

Supply & Laying or passing through pipe, 1100 volt grade heavy duty cable with XLPE insulated Aluminum condector served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and over all PVC sheathed of 10 Sq mm 2 core stranded condector nominal cross section all as directed.

M&L for sand cushioning to UG cables (8 cm deep before laying of cable and 15cm deep over the cable) complete all as specified and directed.

Supply & Laying sub class `B’ bricks old sizes over the HT/LT cable laid flat for protection of cable complete all as specified and directed.

M&L for GI tubing 40 mm dia (light grade) with all necessary fittings laid in trenches under road crossing fixed on poles, wall under floor etc complete all as specified.

S&F JETA NEO 30 W Energy saving IP 65 flood light lumainaire with high power COB LED including necessary electric connection from ceiling ceiling rose to luminaire with suitable size PVC cord all as directed.

S&F JETA NEO 30 W Energy saving IP 65 flood light lumainaire with high power COB LED including necessary electric connection from ceiling ceiling rose to luminaire with suitable size PVC cord all as directed.

M/s Reliable Electromech Systems