SPECIAL REPAIR TO BLDG NO. T-177, T-212 AND SPL REP TO DRAINAGE IN UNIT AREA,PROVN OF TOILET NEAR BLDG NO. T-428 AND PROVN OF SEPTIC AND SOAK WELL NEAR BLDG NO. T-542 AT LEIMAKHONG MIL STN

Amount

Repair to B/R work

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soils complete all as specified and as directed.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out of hard/dense soil complete all as specified and as directed.

ditto item no. 6.00 but add to for each additional 1.5m or part thereof in depth beyond the first 1.5m

Material and labour for loose filling with broken brick bats of gauge 80 to 150mm in soakage pit complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thick thickness below or above ground level complete all as specified and directed.

M&L for PCC type M-15 grade (Nominal Mix) using 20mm graded crushed stone aggregate as in coping incl necessary formworkcomplete all as specified and directed.

M&L for RCC M-15 (nominal mix) using 20 mm graded crushed stone aggregate as in beams, lintels and the like over 1.5m span complete all as specified and directed.

M&L for RCC M-15 (Nominal mix) using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for Precast RCCin cover slabs(for man holes etc) using type M15 grade & set in mortar(1:6) using 20mm graded stone aggregate complete all as specified and directed.

M&L for Precast cement concrete type M15 grade using 12.5mm graded aggregate as in louvres and jallies, 25mm thick (measured solid), including all mouldings set in cement mortar (1:4) complete all as specified and directed.

M & L for PCC M-15 grade, (Nominal mix) (using 20mm graded stone aggregate), as in haunching concrete complete all as specified and as directed.

M&L for PCC M-10 grade (Nominal Mix) using 40mm graded crushed stone aggregate as in surface channel and drains complete all as specified and directed.

M & L for PCC M-7.5 grade, (Nominal mix) (using 40mm graded stone aggregate), as in foundation, filling and mass concrete complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30cm against Item No 18 above and ditto (For adjustment only)

Supply only intergral water proofing compound.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed.

M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed.

M & L for brick work with sub class ‘B’ brick, old size (locally available best quality) straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed.

Material and labour for brick work with sub class “B’ bricks in one brick thick in honey comb walling in cement mortar (1:6) complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in unframed work and in any position complete all as directed.

S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600 x600mm comprising of wall/cleat angle of size 22 x22 x0.35mm and main/cross tee of size 24 x38 x0.35mm with 4mm dia GI wire as suspender and including 4mm thick Plain E-Board including fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting complete all as specified and directed.

M & L for 4mm thick plywood (no of ply 05), grade BWR, type BB, fixed with nails to timber frame work in walls complete all as specified and directed.

M&L for well seasoned 2nd class hard wood in scantling, clean sawn timber framed work complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide, flat, rough finished surface of concrete complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n exc 200mm thick (horizontal or sloping) rough finished surface of concrete complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but not exc. 4 sqm each and removing all unserviceable materials from site complete all as specified and directed.

Taking down shutters of any description n exc. 1 sqm and exc 2 sq. m each and removing all unserviceable materials from site complete all as specified and directed.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 2nd class hardwood plain, solid, straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F for 35mm thick well seasoned 2nd class hardwood glazed and skeleton shutter open rebated and prepared to receive glass etc. (without sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred bead for securing gauge etc size of members of shutter as specified in SSR Part-I section 8 clause 8.24(a) complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the styles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S & F decorative brass curtain brackets fixed to wall with cadium plated brass screws and plastic cleats complete all as specified and directed.

S&F harrison rails of anodised aluminium alloy with fixing brackets, stops, rollers etc.complete all as specified and directed.

S&F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F 75mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F 150mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed.

S&F 100mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed.

S&F 150mm long alumiunium handles cast type anodised complete all as specified and directed.

S&F 100mm long alumiunium handles cast type anodised complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and as directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width or aperture 1.18mm complete all as specified and directed.

S&F in brass chromium plated, 600mm long between flanges tubular towel rail , 20mm dia, D type. fixed with and including chromium plated brass screws and wooden plastic cleats, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for TMT bars 10mm dia and over cut to length, bent to shape as required including cranking, bending and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and directed

M&L for TMT bars 8mm dia cut to length, bent to shape as required including cranking, bending and binding with mild steel wire (annealed) not less than 0.9mm dia as in stirrups, spacers and binders complete all as specified and directed

S&F Structural steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Grade E-250) quality-A complete all as specified and as directed.

S&F structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and as directed.

Dismantling of galvanised plain/ corrugated including Nainital or similar pattern mild steel sheeting of any gauge, thickness roof coverings and segregating serviceable sheet and stacking for reuse and removing unserviceable materials from site of work complete all as specified and directed.

S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with 'J' type cranked hook bolt and washer in roof, wall etc. with grade of zinc coating 275 complete all as specified and directed.

S&F 0.80mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip, wall cladding and straight flashings (length and girth as fixed) with grade of zinc coating 275 fixed with L-type or J-type or cranked hook bolts in lieu of screws complete all as specified and directed

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip, straight flashing etc fixed with self tapping screws as specified.

M&L 25mm thick PCC M-15 grade (Nominal Mix) using 20mm graded crushed stone aggregate in floor, finishes even and rough to receive floor tiles complete all as specified and directed.

M&L coloured non-skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for 75mm thick PCC M-10 grade (Nominal Mix) using 40mm graded crushed stone aggregate as in plinth protection finishing surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick PCC M-7.5 grade (Nominal mix) using 40mm graded crushed stone aggregate as in sub base, finishing the surface even and rough complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed.

S&F Glazed ceramic tiles in vertical surface 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile including 10mm thick cement mortar backing in CM (1:4) complete all as specified and directed.

M&L for precast chequered cement concrete tiles 30cm x 30cm x 25mm thick conforming to IS 13801-1993, set, jointed in neat cement slurry and pointed with grey cement and pigment as in floors complete all as specified and directed.

M&L coloured non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M&L 100mm thick PCC M-10 grade (Nominal Mix) using 40mm graded crushed stone aggregate as in sub base finishing surfaces even and rough complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc, including raking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L rendering 15mm thick on fair faces of brick work in CM (1:4) using water proofing compound @2% by weight or cement as per manufacture instruction and finishing even and smooth without using extra cement all as specified. (Note: Plastering shall be carried out using Dimapur Sand. WPC will be measured and paid separately)

M & L for rendering 15mm thick plaster in cement mortar (1:4) on other than fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand)

M & L for rendering 15mm thick plaster in cement mortar (1:6) on other than fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand)

M & L for rendering 10mm thick plaster in cement mortar (1:6) on other than fair faces of brick work or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note: Plastering shall be carried out using Dimapur Sand)

M&L 15mm thick rendering in cement mortar (1:4) on fair faces of brick work finished even and smooth without using extra cement complete all as specified and directed.

M & L for 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor tiles etc complete all as specified and directed.

M & L for 15mm thick screed bed or bedding layer in cement mortar (1:4) for laying floor finishes etc complete all as specified and directed.

M & L for 20mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finish complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of whitewash complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed.

S&F sheet glass 3mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed.

M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S & F vitreous china wash down water closet pan (pedestal pattern) white with integral foot rest with ‘P’ or ‘S’ trap (excluding flushing cistern and flush pipe) including all fitting complete all as specified and as directed.

S&F PVC low level flushing cistern, white, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe 600mm long 15mm bore with brass heads and washers all as specified and directed.

S & F wash basin, vitreous china (flat back or angle back type), white, 630 x 450 mm size, white, including pillar tap,brackets, waste fittings, waste coupling, 32mm dia, waste pipe, complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor as in waste/soil pipe complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to walls complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor as in waste/soil pipe complete all as specified and directed.

S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F in bib taps(ISI marked), cast copper alloy, chromium plated fancy type, screwed down, screwed for 15mm bore iron pipe or for brass ferule complete all as specified and directed.

S & F Ball (ISI marked) brass valves, high pressure,with polythene float and flynut, screwed for 20mm dia iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F stop valves 15 mm dia cast copper alloy, chromium plated, fancy type, with long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and directed.

M&L for PVC (SWR) vent cowl of bore 75mm complete all as specified and directed.

M&L for PVC (SWR) vent cowl of bore 110mm complete all as specified and directed.

S & F CP shower rose with arm for fixing 15 mm pipe including fittings complete all as specified and directed.

M&L for PCC M-10 grade (Nominal mix) as in concrete bed to drain pipes of 100mm bore including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specifed and directed.

E/ M work

Taking down carefully unserviceable aluminum/ copper point wiring (light/ fan/ socket/ power) complete including fixture & fitting such as switches, sockets, ceiling roses regulators, lamp holder etc. but excluding light fittings & fixture and exhaust fans etc removing and making good disturbed surfaces of wall/ceiling etc complete all as specified and directed.

Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated and unsheathed, multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulator etc including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following :- (Colour code to be followed)

One light/fan point controlled by one, one way switch

One celling / exhaust fan point controlled by one, one way switch

One socket outlet 5 Amps 5 pin on independent board

One socket outlet 5 Amps 5 pin on same board with other switches

All as per item No. 103 here in before but with cable size 2.5 Sqmm and earth continuity conductor of 2.5 Sqmm size for one 5 pin 15 Amps socket out let on independent board complete all as specified and directed.

S&F modular switch piano, 6 Amps, single pole, one way complete all as specified and directed.

S&F modular socket outlet 2/3 Pin 6 Amps combined 2 module complete all as specified and directed.

S&F modular socket multipurpose 3 pin 16 Amps and 3 pin 6 Amps combined 2 module complete all as specified and directed.

S&F Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed.

S&F modular switch piano, 16 Amps, single pole, one way complete all as specified and directed.

S&F modular white cover with frame for fixing of 12 module.

S&F modular white cover with frame for fixing of 4 module.

S&F modular white cover with frame for fixing of 3 module.

S&F blank spacer plate for single module.

S&F modular electronic fan regulator rotary stepped type 120W, 240V, single phase, two module and connecting up complete all as specified and directed.

Taking down old unserviceable main switch/ DBs/ MCB DBs with MCB including making good the disturbed surface complete as directed.

S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 8 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed. (Make: Havells cat part No. DHDPSHODRW 08 or as per list approved makes enclosed hereinafter)

S&F MCB single pole and neutral 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.

S&F MCB single pole 06 to 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed.

S&F PVC Board (30 x 25 x 5) cm depth medium quality ISI marked complete all as directed.

S&F universal batten for G13 T8 lamps (LED TUBE),1200mm long complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. (Make: Havells Regal Batten Cat No.REGALBATTENT8UPTO1X22WSSBSWH or equivalent in Philips/ Bajaj/ Crompton)

S&F ultra bright LED polycarbonate tublight 20W, 1213mm long with very high efficacy suited for installation T8 tublight with G13 lamp holders, complete with all accessories complete all as specified and directed. (Make: Photon Ultra LED tublight Havells Cat No.PHOTONULTRA1213T8SSTL20WLED865SPCor equivalent in Philips/Bajaj/CG)

S&F LED bed light, 10W bright light output of 800 lumens with LED lamp and switch. (Make:- Philips , Havells, Bajaj, CG, Wipro)

Taking down old unserviceable service cable including batten/suspending wires complete all as specify and as directed.

S&F Service wire PVC insulated and PVC sheathed stranded Aluminium conductor 10 sq mm 2 Core fixed to walls or suspended by insulating hanger not more than one meter apart including 4mm dia GI suspension wire and binding with 2mm dia new GI wire with reel insulator complete all as specify and directed..

Taking down ceiling/exhaust fan including dismantling all necessary electrical connections to facilitate repairs to ceiling/wall complete all as specify and directed.

Hanging only/ Refixing ceiling fan removed under item Srl No 125 above and connecting up including provision of cable from ceiling rose or connector to fancomplete all as specify and directed.

S&F building security light fitting new generation energy saving & environmental friendly long life versatile pressure die cast aluminium IP-66 high power LED light 20 watt including suitable size of wall bracket and connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. (Make: Havells Endura Pearl Cat No. ENDURAPEARLSL20WLED757SASYTOPC or equivalent in Bajaj/Philips/Crompton)

Supply only synthetic mat for battery charging room of size 2m x 1m x 12mm thick completed all as specified and as directed.

S&F onload Change over switch (side handle) in sheet enclosure 415 volts AC 50Hz of capacity 100 Amps 4 pole all as directed. (Make- Havells Cat No. IHCNFE100 or equivalent in HPL/Indo Asian/Hager)

Supply, laying, jointing and connecting, LT UG cable XLPE insulated , PVC bedded , galvanised steel strip or wire armored, electric power cable ( heavy duty) 1100 volts grade with stranded aluminium conductor of size 25sqmm 4 core ,laid in trenches / on poles / walls / in ducts / passing through pipes etc including jointing materials such as cable glands, lugs etc and including taking ip/down unserviceable cables from pole/wall/duct/pipes complete all as specified and as directed.

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth wire 4mm dia by means of galvanized iron or steel bolts nuts check nuts and washers and other end connected with earthing testing point including providing suitable testing points as directed including funnel, watering pipe of 20mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6 type C1 50mm thick pre cast RCC 1:2:4 type B1 cover slab set in CM (1:4) re-enforcement with 8mm dia deformed bars @ 15cm C/C and suitable handle of 10mm dia MS round bars, including earth work in hard/dense soil as required complete all as shown in electrical plate No 3 of MES Schedule Part I and testing on completion all as specified and as directed.

N THOIBA SINGH

RK Enterprises

M/S BIJOYA LAXMI ENTERPRISE

SHARMA ENTERPRISE

SKYLINE CONSTRUCTION

MANI PRASAD GUPTA

L BINOD CONSTRUCTION CO

M/s SSS Motors

M/S N JADUMANI SINGH