Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹3.1 Craccepted-finance | ₹3.1 Cr | accepted-finance |
Tender Value
₹3.2 Cr
EMD Value
₹4.9 L
Closing Date
26 May 2026, 9:30 pmClosed
Department Of Youth Empowerment And Sports
JAYAPRAKASH AEE
Indoor stadium developemnt work, Kollegala, Chamarajanagar district
DYES/2025-26/OW/WORK_INDENT145/CALL-2
DYES/2025-26/OW/WORK_INDENT145/CALL-2
Open
Other Works
Two Tender Document System(Two Cover)
Department of Youth Empowerment and Sports Bengaluru Commissioner office
₹5,000
₹4.9 L
26 May 2026
18 May 2026
27 May 2026
25 May 2026
21 May 2026
Indoor stadium developemnt work, Kollegala, Chamarajanagar district
Clearing and grubbing road land Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlie...
Demolishing brick work manually/ by mechanical means including stack ing of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in...
Earth work excavation for Foundation by mechanical means for all works &depth upto 3 m, as per drawing and technical specifications, including settinout, shoring, strutting, barricading, caution light...
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...
Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and co...
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...
Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in require...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ...
Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), ...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, b...
Supply & installation of (7+2) mm synthetic PU flooring approved by international basketball /hand ball badminton /Volleyball federation. Supply and installation of one layer of primer over concrete s...
Supply and installation of Rollable & Foldable Basketball Pole (For Indoor) as per BFI standards (MR)
Supplying and Installation of Sports Protect Inter-locking Floor Mat, mat should be made out of EVA/PU or any other appropriate material, the mat should be Shock absorbing, with high grip, and relativ...
Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. (The cost of ...
Providing Water based glossy paint (Green certified product) to Kerb Stones as per IS 164:2015 technical specifications including cleaning & surface (PWD SR 2023-24 VOL3, PN-78, I.No 8.52)
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nomin...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)(RATE AS PER PWD SR 2023-24 Volume-2, P.No-9, I.No-5.4)
Providing Flush / Ruled/ Struck or weathered Pointing Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cos...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Code...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Code...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height....
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height....
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height....
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by r...
Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer by ramming and ...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...
Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement complete as per drawing and technical specification.Building works machinery, labour, cleaning, straightening, cutting, bending, hook...
Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement complete as per drawing and technical specification.Building works machinery, labour, cleaning, straightening, cutting, bending, hook...
Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement complete as per drawing and technical specification.Building works machinery, labour, cleaning, straightening, cutting, bending, hook...
Providing and constructing load bearing wall with Solid Concrete blocksof size 400x200x200mm having block density more than 1800Kg/m3and minimum compressive strength of 4.00 N/mm2 conforming to IS 218...
Providing and constructing load bearing wall with Solid Concrete blocksof size 400x200x200mm having block density more than 1800Kg/m3and minimum compressive strength of 4.00 N/mm2 conforming to IS 218...
Providing and constructing load bearing wall with Solid Concrete blocksof size 400x200x200mm having block density more than 1800Kg/m3and minimum compressive strength of 4.00 N/mm2 conforming to IS 218...
Providing and constructing load bearing wall with Solid Concrete blocksof size 400x200x200mm having block density more than 1800Kg/m3and minimum compressive strength of 4.00 N/mm2 conforming to IS 218...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...
Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and sid...
Providing and fixing in position fully panelled Honne wood shutters for doors with , stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door /window/ Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspen...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inclu...
Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inclu...
Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inclu...
Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inclu...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off co...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off co...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off co...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off co...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of ...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of ...
Providing & fixing corrugated G.S. sheet roofing including vertical /curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I...
Providing & fixing corrugated G.S. sheet roofing including vertical /curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I...
Providing & fixing corrugated G.S. sheet roofing including vertical /curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I...
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain wate...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 Kg/10 m²) with paint...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 Kg/10 m²) with paint...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 Kg/10 m²) with paint...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 Kg/10 m²) with paint...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth c...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth c...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth c...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shad...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shad...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shad...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g/L and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shad...
Finishing with Epoxy paint (two coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel wo...
Providing and fixing Truss less roofing; High grade Steel, PPGL Pre Painted Alu-Zinc stel sheets AZ 150, ASTM, A792D, Yeild strength 350mpa, 1.6mm thickness, coil width 914mm it includes all lifting a...
Providing and laying vitrified floor tiles with thickness 9-10 mm indifferent sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid...
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings ...
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...
Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete(RATE AS PER PWD SR 2023-24 Vo...
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 75x40x2.5 mm (ordinary type)(RATE AS PER PWD SR 2023-24 Volume-2, P.No-107, I.No-12.75.6)
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete (RATE AS PER PWD SR 2023-24 Volume-2, P.No-200,...
Providing and fixing bright finished brass handles with screws etc. complete:Brass handles 125 mm with plate 175x32 mm(RATE AS PER PWD SR 2023-24 Volume-2, P.No-108, I.No-12.79.1)
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 200x10mm(RATE AS PER PWD SR 2023-24 Volume-2, P.No-107, I.No-12.76.2)
Oxidised mild steel handles 100 mm (RATE AS PER PWD SR 2023-24 Volume-2, P.No-A29, I.No-578)
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...
Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/ Rcc/s tone walls & coloumns/beams with necessary aluminium frame works at required level made...
Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for Brick/ Rcc/s tone walls & coloumns/beams with necessary aluminium frame works at required level made...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal ...
Making soak pit 2.5 m diameter 3.0 m deep with 45 x 45 cm dry brick honey comb shaft with bricks and PVC S.W.R drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt ...
Providing and fixing water closet squatting pan (Indian type W.C. pan )with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually con...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...
Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the wall...
Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete- Class(RATE AS PER PWD SR 2023-24 Volume-2, P.No-139,...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with stan...
Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...
Providing & fixing upvc ventilator with Exhaust Turbo speed fan with 5 blades (300mm x 300 mm & above sized fan) with copper motor having mounting arrangements as per direction of Engineer in charge o...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal exp...
Concealed Conduit System-Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing before conc...
Concealed Conduit System-Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing before conc...
Concealed Conduit System-Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing before conc...
Supplying and fixing PVC/metal conduit Deep Junction Box 19/20mm deep junction box (As per KPWD SR 2023-2024 Page No.3 Sl No.1.5.1)
Supplying and fixing PVC/metal conduit Deep Junction Box 25mm deep junction box (As per KPWD SR 2023-2024 Page ...
Supplying and fixing PVC/metal conduit Deep Junction Box 32mm deep junction box (As per KPWD SR 2023-2024 P...
Supplying And Fixing Metal Fan Box with Round Hook (As per KPWD SR 2023-2024 VOL-6 Page No.3 Sl No.1.12)
Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, up to wall surface complete.up to 50mm conduit in brick wall . (As per KPWD SR ...
Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, screws at an interval of 300mm …. Etc as required.20mm . (As per KPWD SR 2023-2024 Page No...
Point wiring using Copper wire without switch-Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100V grade, COPPER conductor flexible multicore FRPVC insulated,...
Point wiring using Copper wire without switch-Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100V grade, COPPER conductor flexible multicore FRPVC insulated,...
Point wiring using Copper wire without switch-Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 1100V grade, COPPER conductor flexible multicore FRPVC insulated,...
Wiring for lighting/power circuit using one of FR PVC insulated 1100V grade, multistrand Copper conductor single core cable in open or concealed system of wiring with specified IS-694: Confirming to...
Wiring for lighting/power circuit using one of FR PVC insulated 1100V grade, multistrand Copper conductor single core cable in open or concealed system of wiring with specified IS-694: Confirming to...
Wiring for lighting/power circuit using one of FR PVC insulated 1100V grade, multistrand Copper conductor single core cable in open or concealed system of wiring with specified IS-694: Confirming to...
Wiring for lighting/power circuit using one of FR PVC insulated 1100V grade, multistrand Copper conductor single core cable in open or concealed system of wiring with specified IS-694: Confirming to...
Supplying and surface/flush mounting unbreakable metal modular box suitable for mounting modular switch plates. The box should be firmly surface/flush mounted after due groove cutting in Brick/C.C w...
Supplying and surface/flush mounting unbreakable metal modular box suitable for mounting modular switch plates. The box should be firmly surface/flush mounted after due groove cutting in Brick/C.C w...
Supplying and surface/flush mounting unbreakable metal modular box suitable for mounting modular switch plates. The box should be firmly surface/flush mounted after due groove cutting in Brick/C.C w...
Supplying and surface/flush mounting unbreakable metal modular box suitable for mounting modular switch plates. The box should be firmly surface/flush mounted after due groove cutting in Brick/C.C w...
Supplying and surface/flush mounting unbreakable metal modular box suitable for mounting modular switch plates. The box should be firmly surface/flush mounted after due groove cutting in Brick/C.C w...
Supplying and surface/flush mounting unbreakable metal modular box suitable for mounting modular switch plates. The box should be firmly surface/flush mounted after due groove cutting in Brick/C.C w...
Supplying and fixing of superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of screws bolts nuts etc complete on the existing metal /PV...
Supplying and fixing of superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of screws bolts nuts etc complete on the existing metal /PV...
Supplying and fixing of superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of screws bolts nuts etc complete on the existing metal /PV...
Supplying and fixing of superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of screws bolts nuts etc complete on the existing metal /PV...
Supplying and fixing of superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of screws bolts nuts etc complete on the existing metal /PV...
Supplying and fixing of superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of screws bolts nuts etc complete on the existing metal /PV...
Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293.(A) 6Amps one way. (As per KPWD...
Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293.(B) 6Amps Two way. (As per KPWD...
Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293.(C)Stepped Fan Regulator (As p...
Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293.(D)600Watts Dimmer. (As per KPW...
Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293.(E)16Amps one way switch. (As p...
Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293.(F) 6/16A Universal Socket .(A...
Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293.(G)TV/Telephone Socket (As pe...
Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293.(H)RJ45/I.O Outlet Cat-6 . (As...
Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A pendent Holder (As per KPWD SR 2023-2024 Page No.7 Sl No.3.14.6)
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking c...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking c...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve , indicator ON/OFF, energy cross-3 with Short circuit breaking c...
Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board(A) 32-40 Amps 4 pole -[ELMCB] (As per KPWD SR 2023-2024 Page...
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...
Supplying fully automatic star-delta starter unit push button type with suitable wires, 3 contractors, one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 40...
Supplying, fixing and wiring rotary selector switch suitable for Ammeter. (As per KPWD SR 2023-2024 Page No.29 Sl No.5.27)
Supplying, fixing and wiring rotary selector switch suitable for Voltmeter. (As per KPWD SR 2023-2024 Page No.29 Sl No.5.28)
Supplying, fixing and wiring 3 Phase Digital Ammeter /Voltmeter. (As per KPWD SR 2023-2024 Page No.29 Sl No.5.29)
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network wi...
Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulat...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 5...
Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equippe...
Supplying of on load change over switches 4 poles, 415V, 50Hz, AC Supply with AC-23A Duty .(A) 125Amps.(As per KPWD SR 2023-2024 Page No.25 Sl No.5.11.3)
Supplying of on load change over switches 4 poles, 415V, 50Hz, AC Supply with AC-23A Duty (B) 200Amps .(As per KPWD SR 2023-2024 Page No.25 Sl No.5.11.4)
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with therm...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with therm...
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage curr...
Supply and fixing of shunt trip for MCCB CBCT (As per KPWD SR 2023-2024 Page No.27 Sl No.5.16)
Supplying ,fixing, and wiring of Automatic power factor Panel (As per KPWD SR 2023-2024 Page No.30 Sl No.5.39)
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.12" Sweep (300mm) (As per KPWD SR 2023-2024 Page No.46 Sl No.6.2.1)
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ba...
Supplying wall mounting fan suitable to operate at single-phase 230v A.C. supply.300mm Sweep (As per KPWD SR 2023-2024 Page No.46 Sl No.6.5.1)
Supplying & Fixing of PVC batten intergrated LED Tube with high quality diffuser 70% lumen along with CE approved . 2 years of warranty with standard electrical conditions . LED 1x 4' tube light fi...
Supplying & Fixing of PVC batten intergrated LED Tube with high quality diffuser 70% lumen along with CE approved . 2 years of warranty with standard electrical conditions . LED 2x 4' tube light f...
Supplying & Fixing of PVC batten intergrated LED Tube with high quality diffuser 70% lumen along with CE approved . 2 years of warranty with standard electrical conditions . LED Bulbs 18 watts (A...
Supply round / square recess/surface rolling type LED down light with 15 -18 watt rib fabricated die cast aluminium with white powder coated prewired mains connectors along with CE approved 2...
Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated ...
Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary lengt...
Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 amps, ceiling rose w...
Supply of LED FLOOD Light luminaire with pressure die cast aluminium housing body for optimal dissipation Lamp compartment comprising of anti glare clear diffuser with junction moulded polycarbonate/...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required 600x600x3mm plate (As per KPWD SR 2023-2024 Page No.55 Sl No.12.58.6)
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. GI strip 25x3mm (As per KPWD SR 2023-2024 Page No.54 Sl No.12.58.2)
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.25x3mm Copper strip (As per KPWD SR 2023-2024 Page No.40 Sl No.12.58.7)
Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc..Copper wire.c) 8 SWG ...
Supplying of 1.1 KV LT UG cable XLPE or heat resistant PVC insulated ,PVC extruded iner sheath armoured UG LT cable as per IS-1554 ( PART-1) or IS-7098 PART-1 ,Armouring strip thickness in average ...
Supplying of 1.1 KV LT UG cable XLPE or heat resistant PVC insulated ,PVC extruded iner sheath armoured UG LT cable as per IS-1554 ( PART-1) or IS-7098 PART-1 ,Armouring strip thickness in average ...
Supplying of 1.1 KV LT UG cable XLPE or heat resistant PVC insulated ,PVC extruded iner sheath armoured UG LT cable as per IS-1554 ( PART-1) or IS-7098 PART-1 ,Armouring strip thickness in average ...
Supplying of 1.1 KV LT UG cable XLPE or heat resistant PVC insulated ,PVC extruded iner sheath armoured UG LT cable as per IS-1554 ( PART-1) or IS-7098 PART-1 ,Armouring strip thickness in average ...
Supplying of 1.1 KV LT UG cable XLPE or heat resistant PVC insulated ,PVC extruded iner sheath armoured UG LT cable as per IS-1554 ( PART-1) or IS-7098 PART-1 ,Armouring strip thickness in average ...
Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. (A) In Existing Trench -25 sqmm to 75 sqmm (As per KPWD SR 2023-2024 Pag...
Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required. (B) In Existing Trench -95 sqmm to 150 sqmm (As per KPWD SR 2023-2024 P...
Digging of trench of 0.6m deep x 0.50 mtr wide refiling the trench to the required ground level and consolidating etc., complete.(As per Civil SR KSRB I-2, P-7) In soil (hard). (As per KPWD SR 2023...
Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper conductor confirming to table 3 class 5 of IS:8130-1984 and virgi...
Supplying and fixing of class A (medium duty) GI pipe of wall thick ness not less than 3.25mm on pole/wall/ drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class.50mm (As pe...
Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)( 63 / 7.15)(A) 32mm dia (As per KPWD SR 2023-2024 Page No.42 Sl No.6.11.3)
Supplying and fiixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)( 63 / 7.15)(B) 100mm dia (As per KPWD SR 2023-2024 Page No.42 Sl No.6.11.8)
Suplying and fixing 2mm thick perforated cable tray with powder coated paint on existing MS angle support using necessary GI bolts/nuts and washer or welding as required.300x50mm (As per KPWD SR 2023-...
Supplying tinned copper lugs and crimping and wiring to terminal Point for wire of the following sizes.(A) 35 sqmm Long Barrel (As per KPWD SR 2023-2024 Page No.26 Sl No.59.02)
Supplying tinned copper lugs and crimping and wiring to terminal Point for wire of the following sizes.(B) 120 sqmm Long Barrel (As per KPWD SR 2023-2024 Page No.26 Sl No.59.06)
LIGHTNING ARRESTORS WITH GOS UNIT - Supply & Installation of 100 m radius Lighting arrestor (MARKET RATE )
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kollegala tender document 1.docx
Tender Document • 0.66 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .