Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.9 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹31.7 L+₹34,553.40 (1.10%)Rejected-Finance JAISALMER | JAISALMER | RAJASTHAN | 342310 | L2 | Rejected-Finance Due to high amount quoted | |
| 3 | L3₹31.8 L+₹46,890.50 (1.49%)Rejected-Finance JAISALMER | BARMER | RAJASTHAN | 344001 | L3 | Rejected-Finance Due to high amount quoted |
Tender Value
Refer Docs
EMD Value
₹77,465
Closing Date
24 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (A) JAISALMER
HQ CWE (A) JAISALMER-345001
ADDN/ALTN OF OTHER RANK COOK HOUSE AND OTHER RANK ACCN (BLDG NO T-14 AND T-18) AT KHETOLAI UNDER AGE (I) POKARAN.
2022_MES_554444_1
84046
Open Tender
Civil Works
Works
180 days
Pokaran
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE (I) Pokaran
₹77,465
Yes
2 Jan 2023
26 Sept 2022
26 Oct 2022
26 Sept 2022
24 Oct 2022
10 Oct 2022
Amount
Demolition of PCC in Ground Floor and paving n exc 15 cm (below or above ground level).
Dismantaling Stone slabs and tiles of any description or thickness in floors, aprons etc all as specified and directed by Engr-incharge.
Dismantling of floors health or walls tiling and Stone floor including cement mortar bedded (but not backing) & removing serviceable tiles to store and rubbies of the premises all as specified and directed by Engr-incharge.
M&L for PCC type D2 1:4:8 using 40mm graded stone aggregate, 75 mm thick as in sub base for floors, complete all as specified and directed.
M&L for Vitrified ceramic tiles , Light Shade, 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor etc set jointed and pointed in white or coloured cement to match the colour of tiles with screed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6. all as specified.
Ditto as per item No.05 above here in before, but on vertical surface over a backing coat of 10 mm thick plaster in CM 1:4 complete all as specified and directed.
S&F coloured glazed ceramic tiles size 350x250x7mm /450x350x7 mm thick on vertical surfaces, set & joined in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including backing coat of 10mm thick in CM (1:4) all as specified & directed by Engineer-in-charge.
M&L for Hand Cut Kota stone flooring 20-25mm thick incl for cuttting and polishing by machine over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including provision of 20 mm thick screed bedding in CM (1:6)
M&L for machine cut kota stone slab 20 to 25 mm thick as in riser of steps, skirting & dado and laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15 mm thick backing coat in CM (1:4) complete all as directed by Engineer-in-charge.
M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.and black.
M&L for 5cm sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4, complete complete all as specified and as directed by the Engineer-in-Charge.
M&L for 50 mm thick PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregates) as in plinth protection finished even and fair w/o using extra cement
Dismantling Stone slabs in roofs, suspended floors , chajjas, landings, etc., any thickness, jointed in any mortar complete all as specified and as directed by the Engineer-in-Charge.
M&L for jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted, set, jointed and grouted in CM 1:3 as directed by the Engineer-in-Charge.
M&L for jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted, set, jointed and grouted in lime mortar 1:3 or cement mortar 1:6, except stone slabs complete all as specified and as directed by the Engineer-in-Charge.
M&L for Flush Pointing single joints in brickwork or masonry in detached work, flashings, etc. on ceiling in CM (1:4) complete all as specified & directed.
Complete removal of existing water proofing treatment incl bedding if any n exc. 50mm thick etc. on any type of roof, cleaning with wire brushers etc. and removal of debris out side MD land complete all as specified and directed.
M&L for 50 MM PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate for levelling course for consolidated thickness shall be varied from 25 to 55 mm as per the requirements all as directed by Engr-in-Charge.
M&L for 10mm thick screed plaster on roof for laying in CM 1:4 waterproofing treatment, with using WPC (WPC will be measured and paid separately as supply only)
Supply only integral Waterproofing compound.
M&L for water proofing treatment with 3 mm thick APP (Actatic Poly Propylene) modified membrane reinforced with non woven polyester mat of weight 150 gms/sqm as centre core & without multiple layers of polyethylene applied by thermo fusion using LPG torch on the bottom portion of the membrane after applying a coat of bituminous primer @ 0.3 kg/sqm over roof (an overlap of 100 mm & 150 mm shall be provided on sides & end respectively )including a coat of bitumen grade 85/25 @ 1.20 Kg/Sqm and applying one coat of aluminium paint @ 100ml/sqm on top of APP membrane to get uniform finish complete all as per specified and directed by Engr-incharge.
Taking down cement plaster on stone walls and roof ceilings etc., including racking out joints, hacking for key, scrubbing down with water etc. to receive new plaster.
M&L rendering 15mm thick in 1:6 cement plaster on stone masonary surface is to be finished even and smooth (without using extra cement) complete all as specified and directed.
M&L rendering 15mm thick in 1:4 cement plaster on of stone masonary surface is to be finished even and smooth (without using extra cement) complete all as specified and directed.
M&L rendering 5mm thick in 1:3 cement plaster on ceiling of stone surface is to be finished even and smooth (without using extra cement) complete all as specified and directed.
M&L preparation of new wall surface and applying two coats of distemper oil emulsion over a coat of alkali resistant primer,including 3mm thick wall care putty on wall complete all as specified and directeded.
M&L preparation of new wall surface and applying three coat of white wash on surfaces of ceiling complete all as specified & directed by Engineer-in-charge.
M&L Finishing wall with Acrylic emulsion smooth exterior paint of reqd shade, new work (two or more coat) applied @ 1.67 Ltr/10 Sqm over and incl priming coat of exterior primer applied @ 2.20 Kg/10 Sqm complete.
M&L Finishing walls with Acrylic Smooth exterior paint of required hade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) inculding complete removal existing treatment of wall surfaces.
M&L for Complete removal of existing treatment of wall surfaces and applying two coats of oil bond distemper over one coat of primer including 3mm thick wall care putty on wall all as specified & directed by Engineer-in- Charge.
Taking down door chowket or frame incl shutter area n exc 1.50 sqm each complete all as specified by Engr-incharge
Taking down door chowket or frame incl shutter area exc 1.50 sqm but not exc 4 Sqm complete all as specified by Engr-incharge.
S&F Joist, channel, angle, or tee sections, fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), Fe 410-W (Gde E-250) quality A.
Second class HW rail and style plain frame factory made moulded panelled shutter 35 mm thick (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veeneering on both faces. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated.
M&L for II nd class hard wood Glazed and skeleton shutters, 30 mm thick , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, cla-use 8.20 (a); supplied and fitted to chowkats.
S&F Factory made Box Type steel window with side hung shutters including projecting type hinges with steel handle, and steel peg stay , complete without glazing bars, dovetailed or complete as shown in Drawing No. CEJZ/TD/22 sh 1/1 to 1/3, and all as specified & directed by Engineer-in-Charge.
Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165
Supply and fix Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqn in each pane.
S&F Mild steel cold rolled Butt hinges 100 mm medium weight all as specified and directed.
S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed.
S&F 150 mm long Extruded Aluminium alloy handles, cast type, anodised fixed to shutter complete all as specified and directed.
S&F Aluminium alloy , anodised sliding door bolt 300 mm long with hasp, staple ( Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.
S&F in repair decorative type curtain rod, stainless steel 25 mm dia with not less than 1 mm wall thickness complete all as specified and directed by Engineer-in-charge.
S&F in repairs decorative type bracket, stainless steel, suitable for above curtain rod complete.
Preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and direction.
Preparation of new Steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and direction.
Demolition of stone/ boulder masonry and built in cement mortar including all quoins arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m all as specified & directed by Engineer-in-charge.
M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) all as specified & directed by Engineer-in-charge.
Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exceeding 20mm & dressing face beds and joints as specified to squared rubble walling Jodhpur type brought up to courses all as specified & directed by Engineer-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete.
M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates,Fe 410-W (Gde E-250) quality A
Dismantling of wall and ceiling boards (fibre, pulp, insulation etc ) or insulation boards/slabs/blankets any thickness including cover fillets.
S&F for anodised aluminium snap grid 605 x 605 mm frame work for false ceiling all as specified and directed,Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified.
M&L for providing and fixing Gypsum board 12mm thick in ceiling fixed with screw as per manufacturers instructions.
Taking down carefully existing point wiring of any description light, fan,sockets,bells etc) complete including fittings such as terminal boxes, switches, sockets, ceiling rose, lamp holders, brackets sketch fittings, pendants, fan regulartors and making good the disturbed surfaces, walls, floors etc. all as directed by EIC
Taking down old unsv MCB DB / main switch with McB complete all as specified and directed
Taking down old unsv GI earthing
Taking down old unsv LT UG cable of size 25Sqmm x 4 core
Taking down old rusted GI Pipe of size 40mm dia
M&L point wiring complete with 1.5 Sqmm single core PVC insulated cable 1100 Volts grade multistranded copper conductor drawn through in PVC Casing and Capping on surface stone/brick, masonry walls, roofs floors etc including MS terminal boxes fabricaterd out of 1.12mm thick MS sheet sunk type / surface type and laminated top sheet of 2mm thick for housing switches sockets, regulators etc including provn of 1.5 sqmm dia copper conductor for earth wire connected to common dolly all for as One light point / Fan point / Exhuast Fan point controlled by one 5 Amps One way switchs pecified and directed by Engineer-in-Charge
All as per Item No. 61 but for one 3 pin 5/6 Amps switch socket outlet on same board
All as per Item No. 61 but for one 3 pin 5/6 Amps switch socket outlet on independent board
All as per item No.61 above but wiring with 4.0 Sq mm and 2.5 sqmm for earth continuity for 3 pin 15/16 Amps switch socket combination
M&L switch piano flush type single pole one way 5 Amps complete all as specified and directed.
M&L switch piano flush type single pole one way 15 Amps complete all as specified and directed.
M&L Switch Socket Combination outlet, multipurpose, 2 pin 5 amps/3 pin 5 amps controled by one switch 5 amps, flush type complete all as specified and directed.
M&L Universal socket outlet with shutter, 5/15 amps controlled by one switch 15 amps, flush type complete all as specified and directed.
S&F S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd all as specified and directed
M&L lamp holder insulated body with back plate suitable for battern fittings
S&F Ceiling rose surface bakelite 65 x 50 mm 2/3 terminais all as specified
S&F Sheet Modular metal enclosure DB SPN 240 Volts 12 Way double door type with 200 Amps busbar for fixing of MCBs
S&F MCB SPN 40A amp rating 240V, 10KA 'C' series fixing in DB's including connecting with bottle type copper thimble complete all as specfied and directed by Engr-in-Charge.
S&F MCB SP 6 to 32A amp rating 240V, 10KA 'C' series fixing in DB's including connecting with bottle type copper thimble complete all as specfied and directed by Engr-in-Charge.
supply and fix LED Lamp Retro fit type 9 watts 230 V and all as specified by Engr-in-charge
Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge o the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.5 connected to earthing test point incl necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1 funnel with water Pipe, GI pipe, 15mm dia medium grade protection pipe, GI earth lead all as specified
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
S&F new generation energy saving and environmental friendly long life varsatile pressure die cast aluminium IP66 road way light fitting with high power LED as light source of capacity 20 watts with suitable drivers etc fixing to wall/poll with including taking down old unserviceable street light fitting of any type and capacity complete all as specified and directed. Make : Havells cat No : VILUMINASL20WLED757SASYBOPC or techno commercial equivalent model in Philips /Bajaj /Luker /Wipro.
S&F service bracket for street light fitting made out of 40mm GI pipe of suitable dia light grade not less than 1.2 mtr long, bent to 115 degree shape, fixed to Pole/Wall in any position with 2 Nos 32 x 6mm GI Clamp, nuts, bolts, washers etc complete all as specified and directed
Supply and lay in trenches/fixed to walls/poles etc and commissioning XLPE insulated and PVC sheathed heavy duty LT 1100 Volts grade armoured under ground cable with aluminium conductor of 4 Core 25 Sqmm incl taking out of existing cable all as directed. Note :- Earth work excavation, sand cushioning and brick protection shall be measured and paid separately.
Excavation in trenches not exc 1.5 mtr wide and n.exc 1.5 mtr in deep and getting out in Hard/Dense soil laying of cables etc.
Returning filling in including spreading, leveling watering and well ramming in layers n.exc 25cm thick using excavated soil
Removing excavated surplus soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc 1.5mtr above from the starting point
Supplying and laying reinforced precast concrete cable cover class LV , Type 1 flat with size 250mm x150 mm x 40mm all asspecified and directed by Engr-in-Charge.
Supply and spread approved Tibba sand for foundations/Cable duct including watering and consolidation, cushioning of cable laid in trenches complete all as directed by Engineer-in-Charge Note:- Punned thickness will be measured for payment purpose
Supply and lay GI tubing , 40 mm bore light grade for cable protection at road crossing / on poles and tubing sealed at both ends after laying the cables complete all as directed by Engineer-in-Charge. Make :- ISI
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .