Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹33.0 LAccepted-AOC B 303 MADHAV 99 NIRANT CROSS ROAD VASTRAL AHMEDABAD 382418 | AHMEDABAD | AHMEDABAD | GUJARAT | 382418 | L-1 | Accepted-AOC Lowest qualified bidder. Hence being awarded. | |
| 2 | L-2₹33.6 L+₹57,867.20 (1.75%)Rejected-AOC 1ST FLOOR UTKARSH NIRMAN BUILDING SADAR MANGALWARI NAGPUR MAHARASHTRA 440001 UDYAM MH 20 0038439 27AADCF7138C1ZT R M MSME STATUS AS VERIFIED | NAGPUR | MAHARASHTRA | 440001 | L-2 | Rejected-AOC Not a qualified L1 bidder | |
| 3 | L-3₹39.4 L+₹6.3 L (19.1%)Rejected-AOC 02 UMRER PIPLA UDASA APTUR ROAD VILLAGE TOWN APTUR CITY UMRER NAGPUR MAHARASHTRA 441204 INDIA | NAGPUR | MAHARASHTRA | 441204 | L-3 | Rejected-AOC Not a qualified L1 bidder |
Tender Value
₹42.4 L
EMD Value
₹53,000
Closing Date
16 Sept 2023, 3:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri. Nitin Naik
OFFICE OF THE AREA GENERAL MANAGER WCL BALLARPUR AREA P.O. SASTI TA. RAJURA DIST. CHANDRAPUR (MS) PIN 442905
Design Supply Installation and Commissioning of complete automatic wheel wash system with 1 year warranty period and construction of CC approaches at Dhoptala OCM under Sasti Sub Area
2023_WCL_287798_1
ba3650-civ-e60-2023-24/481
Open Tender
Civil Works - Others
Item Rate
485 days
WCL Ballarpur Area
As per NIT
4 documents required · 4 mandatory
₹53,000
17 Dec 2023
2 Sept 2023
18 Sept 2023
2 Sept 2023
16 Sept 2023
2 Sept 2023
2 Sept 2023 - 9 Sept 2023
Amount
Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead upto 1000m as per relevent clauses of section-300 of specification.
Construction of granular sub-base by providing well graded material like natural sand crushed gravel or crushed stone having CBR >30, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator or plant mix method at OMC, and compacting with vibratory rollers of 80 to 100 kN static weight to achieve the desired density, complete as per Clause 401 of Specification. (A) Plant Mix Method For Grading-I Material
Granular Sub-base with Well Graded Material (CBR>30 or more) (Table:- 400-1 & Table 400-2) Construction of granular sub-base by providing well graded material like natural sand crushed gravel or crushed stone having CBR >30, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator or plant mix method at OMC, and compacting with vibratory rollers of 80 to 100 kN static weight to achieve the desired density, complete as per Clause 401 of Specification. (A). By Plant Mix Method For Grading-III Material
Construction of dry lean cement concrete Subbase over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length onstruction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8- 10 tonnes vibratory roller, finishing and curing as per clause 601 of specification complete in all respect.
Construction of un-reinforced, dowel jointed, plain cement concrete pavement M-30 grade concrete over a prepared sub base with cement , coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures as approved, curing compound, finishing to lines and grades as per drawing as per IRC 15 2011 and as per relevant clauses of section 602 of specifications complete but including cost of steel in dowel bar and tie rods etc.
Complete design, supply and installation of Automatic Wheel Wash System consisting of the following: 1. Hot Dip Galvanized wash Bay 4.20 mtr with stainless steel nozzles- 1 set. 2. Side spray Panels, 4.2.00(L)x 1 (H) mtr- plate 1mm thick with 50x50x6mm Angle support - 1 each of LH & RH-2 nos. 3. Wash water pump 25HP/1800LPM - 2 set. 4. Automatic vehicle entry sensing - 1set. 5. Control Panel - 1 set. 6. Oil skimmer -1set. 7. Flocculent Dosing Pump 3 HP -1 set. 8. Reinforced cement Concrete tank of 40 Cum with clear and raw water seperation, sludge and oil/ grease collection chambers, RCC platform of size 9.00 mtr x 3.30 mtr with ramp on both side and Wash bay area above 0.45 mtr on either side CC road top level with required slope and shape including side drains up to tank. 10. Required pipe line network including 80 to 100 nos stainless steel nozles. 11. One covered shed for control panel and pumpsets. 12. Side railing of 40 mm dia MS pipes including transportation , handling charges etc all complete with one year warranty.
Total impact of GST for the purpose of CTC
FRUTIGER INDIA PVT. LTD.
SINGH BROTHERS COMPANY
stage.html
html • 0.04 MB
techsummary_297990.pdf
PDF • 0.40 MB
finsummary_297990.pdf
PDF • 1.45 MB
Awarde-60.pdf
PDF • 2.09 MB
BOQ Comparative Chart
xlsx • 0.01 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .