Special Repair and Maintenance of Street Lights in Japanese Garden, Sector- 31, Chandigarh

Supply & laying of ISI marked 4 core 16 mm sq PVC Insulated Aluminium armoured cable loose in trench/pipe:- Supply & laying of ISI marked 4 core 16 mm sq PVC Insulated Aluminum conductor armoured cable (PVC Sheathed) of make Havells/ Finolex/ Cirtina/ Ecko/ Lapp/ Polycab/ KEI conforming IS:1554 (Pt.1) amended. The cable to be laid in trench/ pipe as per DSR Code 7.5.1/2022 MV CB PIP-25 Part-II (External). Material Testing report to be submitted and material to be supplied at site after confirmation from Engineer-in-charge.

Supply & Laying of DWC pipe 51/63mm without hand bockey:- DSR 14.16.1 (75 cm below) Supply and Laying of pipe (OD-63 mm & ID-51 mm nominal) Double Wall Corrugated (DWC) Without Hand Bockey High Density Polyethylene pipe ISI marked (HDPE Density 240 to 958 KG/Cm3) having corrugation on the outer wall and plain surface inner wall with average wall thickness for outer layer as 1.1+0.1mm and for inside layer 1.2+0.1mm maintenance free, ‘C’ value over 150 with lowest frictional losses, good weathering resistance, with all accessories like socket, bend, couplers etc. conforming to IS 14930/ IS 16205 complete with fitting and cutting, jointing etc. direct in ground (depth as per the direction of Engineer in charge or upto 75 cm below ground/ road level by digging the ground or cutting the road/ paver blocks upto required level & laying of DWC pipe for laying L.T. upto 1.1 KV grade) cables etc. including excavation and refilling of digging including sand cushioning and protective covering etc., complete as required and PSEN-50086 (P-I & II) of Make Gemini, Rex, Duraline. The entire satisfaction of Engineer-in-Charge of work.

Supply & Laying of DWC pipe 51/63mm with hand bockey:- DSR 14.15.1 (75 cm below) Supply and Laying of pipe (OD-63 mm & ID-51 mm nominal) Double Wall Corrugated (DWC) With Hand Bockey High Density Polyethylene pipe ISI marked (HDPE Density 240 to 958 KG/Cm3) having corrugation on the outer wall and plain surface inner wall with average wall thickness for outer layer as 1.1+0.1mm and for inside layer 1.2+0.1mm maintenance free, ‘C’ value over 150 with lowest frictional losses, good weathering resistance, with all accessories like socket, bend, couplers etc. conforming to IS 14930/ IS 16205 complete with fitting and cutting, jointing etc.direct in ground (depth as per the direction of Engineer in charge or upto 75 cm below ground/ road level by digging the ground or cutting the road/ paver blocks upto required level & laying of DWC pipe for laying L.T. upto 1.1 KV grade) cables etc. including excavation and refilling the trench but including sand cushioning and protective covering etc., complete as required and PSEN-50086 (P-I & II) of Make Gemini, Rex, Duraline. The entire satisfaction of Engineer-in-Charge of work.

Supply & laying of ISI marked 3.5 Core 25 mm sq PVC insulated Aluminum Conductor armoured ISI Marked cable of in Trench/Pipe. Supply & laying of ISI marked 3.5 core 25 mm sq PVC Insulated Aluminum conductor armoured cable (PVC Sheathed) of make Havells/ Finolex/ Cirtina/ Ecko/ Lapp/ Polycab/ KEI conforming IS:1554 (Pt.1) amended. The cable to be laid in trench/ pipe as per DSR Code 7.5.1/2022 MV CB PIP-25 Part-II (External). The job included all Connections, Commissioning and testing of phase supply Material Testing report to be submitted and material to be supplied at site after confirmation from Engineer-in-charge.

Repair of lighting compartment of the Bollard: The portion of the heritage bollard where bulb will be installed is to be repaired (lighting compartment). The job includes removing the already fixed old glass/ fibre sheet. The new clear polycarbonate sheet (5-6 nos. of approx. size 6"x8") are to be installed/ fixed using proper screws. The job also includes providing & installing the opening side (MS) of the compartment with hinges by doing welding and providing proper closing mechanism and also closing it with suitable size nut & bolt.The work shall be executed to the entire satisfaction of Engineer-in-Charge

Painting of Heritage Bollard including lighting compartment ( MS portion) with good quality Grey Colour Paint of make Asian Paint/ Indigo or equivalent reputed make & doing required inor repair with white putty.. Before painting, the old dull paint in existing bollard be properly removed with ragmark. After this good quality white putty is to be applied on whole bollard and then painting is to be done.

Providing & fixing of junction box of size suitable for accomodating 4 core 16mmsq cable inside suitable size (already made in other bollards) foundation including doing connection of the cable. The rates are inclusive of making the required foundation and other petty material to complete the job.

Supply and erection of Junction Box cover of fibre sheet of suitable size on existing bollard. The fibre cover shall be installed on existing junction box with the help of screw. The job includes the cost of all labour charges and other petty material,nut & bolts required to complete the job upto entire satisfaction of Engineer-in-Charge.

P/F LED lamp 15 watt screw/pin type lamp in the lighting compartment of the bollard and making connection of make - Bajaj/Havells/ Wipro/ Philips. And work should be executed as per the entire satisfaction of Engineer in charge.

Supply & Erection of Screw type Lamp Holder (E-27) of make Anchor/ U.K. Plastic/ RIMCO/ Havell's, inside the lighting compartment of the heritage bollard. The work shall be executed to the entire satisfaction of Engineer-in-Charge