TP1-72/2025-26 OF CE/TP-I/CNI

Amount

Dismantling the PCC met with below groung level during execution including labour, tools etc.complete.

Dismantling the RCC met with below groung level during execution including labour, tools etc.complete.

Dismantling the Brick/Stone Masonry met with below groung level during execution including labour, tools etc.complete.

Earth work excavation for foundation in ordinary soil with lead of 10 to 100 m and lift of 3m in sand, silt or other loose soil, wet sand, or silt not under water, light black cotton soil, sandy loom and ordinary soil including excavated earth. In Hard stiff clay, stiff black cotton, hard red earth,, shales, murram, stoney earth and earth mixed with small size boulders SS 20

Supplying and filling in foundation and basement with filling sand in layers not more than 15 cm thick well rammed and watered consolidated etc complete as per standard specification

Re filling in foundation with excavated earth in layers not more than 15 cm thick well rammed and watered consolidated etc complete as per standard specification

Providing wet mix 1:2:4 below road portion including cost of all labour, lead, lift and T&P etc., complete.

Transporting the surplus excavated earth, debris etc away from the site to a lead of 5km including cost of all lead, lift, conveyance , loading, unloading etc. complete

Providing Anti-termite treatment in four stages i) Immediately after ewe and before laying of foundation concrete ii) before refilling sides of foundation iii) Before laying of flooring concrete and iv) outside of basement upto 1m alround the building with approved anti-termite chemicals as specified by the manufacturer including cost of all materials, lead etc. complete.

Laying PCC 1:3:6 mix using 20mm HBG machine crushed metal for foundation matt concrete including cost of all labour, materials, lead, lift, curing etc. Complete.

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25grade with a minimum cement content of 360 kg per cu.m for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded metal including form work,but excluding cost of steel reinforcement.Column Raft

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade with a minimum cement content of 360 kg per M3 for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and downgraded metal including form work, but excluding cost of steel reinforcement. (up to basement level) Grade beam

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade with a minimum cement content of 360 kg per M3 for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and downgraded metal including form work, but excluding cost of steel reinforcement. (up to basement level) Plinth beam

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25grade with a minimum cement content of 360 kg per cu.m for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and down graded metal including form work,but excluding cost of steel reinforcement.RCC Raft

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade with a minimum cement content of 360 kg per M3 for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and downgraded metal including form work, but excluding cost of steel reinforcement. (up to basement level) Column up to basement

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade with a minimum cement content of 360 kg per M3 for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and downgraded metal including form work, but excluding cost of steel reinforcement. (up to basement level) RCC wall

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade with a minimum cement content of 360 kg per M3 for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and downgraded metal including form work, but excluding cost of steel reinforcement. precast Slab

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M20 grade (with a minimum cement content of 315 kg per M3) for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and downgraded metal including form work, but excluding cost of steel reinforcement.G FLOOR: Column

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade (with a minimum cement content of 315 kg per M3) for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and downgraded metal including form work, but excluding cost of steel reinforcement.G FLOOR: Cast in situ cover slab

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade (with a minimum cement content of 315 kg per M3) for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and downgraded metal including form work, but excluding cost of steel reinforcement.G FLOOR: Lintel in GF

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade (with a minimum cement content of 315 kg per M3) for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and downgraded metal including form work, but excluding cost of steel reinforcement.G FLOOR: Sun shade and loft

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade (with a minimum cement content of 315 kg per M3) for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and downgraded metal including form work, but excluding cost of steel reinforcement.G FLOOR: Beams

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade (with a minimum cement content of 315 kg per M3) for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and downgraded metal including form work, but excluding cost of steel reinforcement.G FLOOR: slab

Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of M25 grade (with a minimum cement content of 315 kg per M3) for reinforced concrete structural elements under controlled water cement ratio with plasticiser using 20mm and downgraded metal including form work, but excluding cost of steel reinforcement.Staircase waist slab/landing slab in ground floor

Supplying and fabricating and placing in position of MS/RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire etc.complete.

Brick work in CM 1:4 (one cement & three sand) for partition wall 115mm thick, using all ll Class Ground Moulded Chamber Burnt bricks including finishing ,curing etc.complete complying with standard specification G Floor

Brick work in CM 1:5 using all ll Class Ground Moulded Chamber Burnt bricks for Basement including the cost of all materilas , lead, lift, labour, Centering Charges T&P etc., complete as directed by the Engineers at site. Foundation & basement

Brick work in CM 1:6 (one cement & Six sand) using using all ll Class Ground Moulded Chamber Burnt bricks including finishing, curing etc. complete complying with standard specification - Super structure G floor

Brick work in CM 1:6 (one cement & Six sand) using using all ll Class Ground Moulded Chamber Burnt bricks including finishing, curing etc. complete complying with standard specification - Super structure G floor

Providing cornice and architectural elevation with Brick work in C.M.1:4 using Fly Ash brick of size 9" * 4 1/2" *3 " and cement mortar bands as per drawing and as directed by the Engineer at site, at all levels including cost of all materials, labour etc. complete.

Providing grooves of 25mm in the plastering for architectural elevation works

Supplying and laying in spun pipe 230mm dia inbet. Cable duct crossing portion including cost of all materials, labour etc complete

Supplying and fixing MS angle, channel, Chequered plate, MS rail, etc wherever required as directed by the Engineer as per standard specifcation

Supplying and fixing MS grill gates, MS grills, name board, hand rail, ladder etc. at various levels as per approved drawing using channel, square rods, ornamental grill parts and flats including fixing in position with suitable hold-fast locking arrangements etc. complete as per standard specification.

Supplying and fixing ornamental steel flowers for MS grill gate including welding as per standard specification

Supply, fabrication , fixing in position of Collopsible gate for stair case using MS flats, wheels,etc as per standard specification including cost of all materials ,lead, labour etc.complete

Supplying and erecting pull and push type rolling shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc., ROLLING SHUTTERS (WITH ISI MONOGRAM)

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Engineer-In-Charge before use on work.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Fixed & Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The ventilators have provisions for fixing exhaust fan of suitable size. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Engineer-In-Charge before use on work.

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

Supplying & fixing CW doors with outer frame of size 100x75 mm of Kongu/Padak/Vengai scantlings and door shutters should be Water Proof Solid core flush shutters with teak ply on both side with teak wood lipping alround 35mm thick with necessary adhesive and CP screws complying with standard specification. The rate inclusive of three coats of best quality varnish but including cost of furniture fittings such as 300 mm tower bolt 2 Nos. 200 mm tower bolt 1no. 300mm aldrop 1No. Aluminium Ornamental handle 2 Nos. and 1No. door stopper etc. complete.

Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter.

Supplying and fixing in position of hydraulic door closer heavy duty using Aluminium Extruded section body tubular type universal with ISI mark double speed adjustment like Hardwin, Gazal or equivalent quality including cost of all material, lead, labour etc. complete.

Supplying and fixing in position of Sun control film in glazed windows of approved quality and brand including cost of all materials, lead, labour etc.complete.

Providing Heritage flaks finish for the exterior surface of building of approved colour at all elevation including cost of all materials, lead, lifts, labour,Scaffolding, equipments, sprayer, tools and mixed proprely as per the manufactures reccommantation, apply and finish properly etc complete.

Plastering in cm 1:3 mix 12mm thick for bottom of roof slab, bottom and sides of sunshade partition walls etc. including cost of all materials, lead, lift, watering, curing etc complete

Plastering with cm 1:4mix using 12mm thick for Partition walls including cost of all materials,labour,lead, lift etc complete

Plastering with cm 1:5 mix using 12mm thick for outside walls including cost of all materials,labour,lead, lift etc complete

Plastering with cm 1:3 mix using 20mm thick for Floorings, plinth protection including cost of all materials,labour,lead, lift etc complete

Paving the control room floor with rectified vitrified core endura grey coated floor tiles (Industrial type floor of johnson endura make , quality, colour and shade as directed by the engineer at site) of size 600 mm x 600mmx12mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand) 20mm thick laid in-situ and pointed with same coloured cement mortar neatly finished as per standard specification .

Paving the floor with best quality Double Charged Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the floor with acid resistant tiles (quality, colour and shade as directed by the engineer at site) of size 305 mm x 305mm x 6 mm in battery room over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement

Dadooing walls with glazed tiles of best approved quality of make Johnson, Nitco, Euro of size 300x200 mm over cm 1:2, 12mm thick including cost of all materials, labour, lead, lift etc., complete (Dadooing with printed design colour glazed tiles of size 300mm x 200mm x 6mm)

Paving the floor with best approved quality Pre-polished anti-skid step tiles of 20mm thick laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., complete as per standard speicification.

Paving the approach to control room and cash collection centre , stair case steps with Pre polished non skid out door floor tiles 200mmx200mmx10mm thick set in CM 1:3, 20mm thick including cost of all materials, labour , lead lift etc.complete.

Finishing the top of floor with Granolithic Finish with CC 1: 2: 3 (one cement Two sand & three HBS jelly) 50 mm thick using chips of grade 10 mm and below and rubbed smoothly

Providing harizantal / vertical decorative mortar bands in CM 1:3, 20mm thick to uniform level and neat finish including cost of all materials ,scaffolding , lead,lift etc.complete.150mm width

Providing harizantal / vertical decorative mortar bands in CM 1:3, 20mm thick to uniform level and neat finish including cost of all materials ,scaffolding , lead,lift etc.complete.100mm width

Providing harizantal / vertical decorative mortar bands in CM 1:3, 20mm thick to uniform level and neat finish including cost of all materials ,scaffolding , lead,lift etc.complete.75mm width

Providing and laying white cooling tiles 300x300 size over screed concrete 1:3:6 with average thickness of 25mm for required gradient and using best quality of one course of weather proof tiles of approved quality using CM 1:3, 12mm thick and using 3mm spacer and pointing with water repellent U bond and grout inclusing cost of all materials, transport, curing, etc., complete.

Providing & fixing PVC Rain water down fall pipe of dia 110 mm OD 6kg/ cm2 with necessary Twclamps , plugs , shoes, bends,other clamps,screws,nails etc. etc complete complying with standard specification . The rate is inclusive of cost of removable iron grating

Supplying and fixing of wash basin of size 550*400mm with all accessories of approved quality Parryware / Hindware including cost of wash basin with 15mm CP Pillar cock fixing using rag bolt and nut 15mm dia nylon connection hose and outlet using 32mm dia pipe waste coupling waste pipe water pipe for outlet including 15mm control wheel valve, 15mm dia brass nipple etc. complete as per standard specification.

Supply and fixing in position of Indian make white/ Colour glazed earthen ware lipped mouth flat back urinal basin of best approved quality of size 450mm with GI pipe connection to suitable length ,32mm bell mouthed PVC connection ,20mm dia GM wheel valve fixing the urinal to the wall including cost of all material,labour etc.complete.

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges and good quality CP Health faucets including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings..... such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)

Supplying and fixing white marble stone of size 600*1200mm, 20mm thick for partition to urinals including cost of all materials , lead lift,etc complete.

Supplying and fixing position PVC Nahani Trap with stainless steel gratings of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications

Supplying and fixing in position RCC Pre-fabricated Manhole covers 450X450 of best approved quality and as per standard specification etc. complete

White washing two coats by using emulsion paint over primer coat with white in colour in all floors including cost of all and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed by the engineer at site.

Painting 2 coats with approved Plastic Emulsion paint over one priming coat of plastic emulsion paint over cement plastered wall surface, ceiling and other new surface and including cleaning ,preparing the surface and curing etc.complete.

Colour washing 2 coats with approved Emulsion paint over one priming coat over cement plastered wall surface applying wall putty, cleaning with sand paper , including cleaning ,preparing the surface cost of all labours to work at all levels, all materials, Scaffolding etc.complete.

Painting new wood work with two coats of synthetic enamel paint of approved quality and colour over a priming coat including cost of all materials etc complete.

Painting new iron works with two coats synthetic enamel paint over one coat of primer including cost of all materials, lead, lift, etc complete.

Supplying and fixing of PVC pipe ISI branded and approved quality as indicated below for water line , sanitory line etc.including cost of PVC special , and all other materials etc.complete as per standard specification. PVC Pipe 140mm dia. 6kg/ sq.cm for bore well

Supplying and fixing of PVC pipe ISI branded and approved quality as indicated below for water line , sanitory line etc.including cost of PVC special , and all other materials etc.complete as per standard specification. PVC Pipe 140mm dia. 6kg/ sq.cm for bore well strainer pipe with slotted holes

Supplying and fixing of PVC pipe ISI branded and approved quality as indicated below for water line , sanitory line etc.including cost of PVC special , and all other materials etc.complete as per standard specification. PVC Pipe 110mm dia. 6kg/ sq.cm

Supplying and fixing of PVC pipe ISI branded and approved quality as indicated below for water line , sanitory line etc.including cost of PVC special , and all other materials etc.complete as per standard specification. PVC Pipe 75mm dia. 6kg/ sq.cm

Supplying and fixing of PVC pipe ISI branded and approved quality as indicated below for water line , sanitory line etc.including cost of PVC special , and all other materials etc.complete as per standard specification. PVC Pipe 63mm dia. 6kg/ sq.cm

Supplying and fixing of PVC pipe ISI branded and approved quality as indicated below for water line , sanitory line etc.including cost of PVC special , and all other materials etc.complete as per standard specification. PVC Pipe 50mm dia. 6kg/ sq.cm

Supplying and fixing of PVC pipe ISI branded and approved quality as indicated below for water line , sanitory line etc.including cost of PVC special , and all other materials etc.complete as per standard specification. PVC Pipe 40mm dia. 4kg/ sq.cm

Supplying and fixing of PVC pipe ISI branded and approved quality as indicated below for water line , sanitory line etc.including cost of PVC special , and all other materials etc.complete as per standard specification. PVC Pipe 32mm dia. 4kg/ sq.cm

Supplying and fixing of PVC pipe ISI branded and approved quality as indicated below for water line , sanitory line etc.including cost of PVC special , and all other materials etc.complete as per standard specification. PVC Pipe 25mm dia. 4kg/ sq.cm

Supplying and fixing of PVC pipe ISI branded and approved quality as indicated below for water line , sanitory line etc.including cost of PVC special , and all other materials etc.complete as per standard specification. PVC Pipe 20mm dia. 4kg/ sq.cm

HDPE pipe 32mm dia 10 Kg/Sq.cm for Borewell

HDPE pipe 25mm dia 10 Kg/Sq.cm for Borewell

Providing and fixing wheel valve of various diameter of Gun metal made including cost of all materials, labour, lead and lift etc., complete. 32MM DIA

Providing and fixing wheel valve of various diameter of Gun metal made including cost of all materials, labour, lead and lift etc., complete. 25MM DIA

Providing and fixing wheel valve of various diameter of Gun metal made including cost of all materials, labour, lead and lift etc., complete. 20MM DIA

Supplying and fixing of Specials of approved brand (leader ) ISI quality including cost of all materials, labour etc.complete 32MM dia Union

Supplying and fixing of Specials of approved brand (leader ) ISI quality including cost of all materials, labour etc.complete. 25mm Dia Union

Supplying and fixing of Specials of approved brand (leader ) ISI quality including cost of all materials, labour etc.complete.20mm Dia Union

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying and fixing approved best quality brass Aluminium towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

Supplying and fixing of SINTEX pvc water tank of 1000 litres capasity with necessary specials and fittings including cost of all materials , lead lift etc complete

Supplying and fixing ornamental hand rail for front ramp portion in stainless steel 50mm dia pipe at top and 25mm dia two runs at middle and 40mm dia for verticals at every 1000mm c/c including cost of all materials ,lead, etc.complete. Fixed Type

Supplying and fixing ornamental hand rail for front ramp portion in stainless steel 50mm dia pipe at top and 25mm dia two runs at middle and 40mm dia for verticals at every 1000mm c/c including cost of all materials ,lead, etc.complete. Removable Type

Conducting geophysical survey to access the availability of ground water and to locate the place of bore well including all labour charges lead, lift, etc. complete.

Drilling borewell in all kinds of soil 150 mm dia using rotary drilling power driven/ hand driven equipments including hire charges for equipment, bentonite solution, labour etc. complete

Supplying and filling with pebbles for annular space between strainer pipe and earth surface including cost of all materials, lead, lift etc. complete.

Flushing the borewell with power rotary flushing equipement including mobilisation and demobilisation etc. complete.

Supplying and erection of 1.5HP Texmo/Kirloskar/ sharp/ Suguna make jet pump with all accessaries , suitable L&T/ Siemens starter , L& T main switch , fuse,foot valve , etc. including cost of all materials as directed by the engineer at site, commissioning etc. complete.for Borewell.

Supplying and erection of 1.5HP Texmo/ Kirloskar / sharp/ Suguna make Monoblock pump with all accessaries , suitable L&T/ Siemens starter , L& T main switch , fuse,foot valve , etc. including cost of all materials as directed by the engineer at site, commissioning etc. complete.(For Dewatering Duct water)

Wiring with 2x1.5sqmm (22/0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with MS switch box and 5A F.T. Switch in flush with wall and covered with hylum sheet of 3mm thick with painting of suitable colour continuous earth wire connection of 14 SWG TC wire for light point / Fan point or Electronic Regulator.

Wiring with 2x1.50 sq.mm Pvc insulated single core unsheathed Copper multistand cable of 1100V grade in suitable heavy gauge M.S.Conduite pipe on wall and ceiling with MS accesories with 150x100x75mm MS switch box inflush with wal, with 3mm thick hylum sheet cover for 5A 3pin non interlocking flush type CS plug with painting of suitable colour with continious earthwire connection of 14SWG TC wire for open plug point.

Wiring with 2x4 sq.mm PVC insulated single core unsheathed Copper multistand cable of 1100V grade in suitable heavy gauge M.S.Conduite pipe on wall and ceiling with MS accesories with 150x100x75mm MS switch box for 15A 3 pin inflush with wal, with 3mm thick hylum sheet cover non interlocking flush type CS plug with painting of suitable colour with continious earthwire connection of 14SWG TC wire for open plug point.

Wiring with two pair copper telephone cable in suitable conduit pipe in wall and terminated with socket for telephone jack with TW switch box in flush with wall covered with hylum sheet of 3mm thick for telephone point

Supply and fixing of 3 phase 4 wire 4 way ICDB of 32 Amps per way with 63 A TPN MC switch with suitable trunking box MS cable entry and internal connection in suitable angle iron frame work with PWD earthing.

Supplying and fixing box type 4'-40w single flouresent fitting complete with copper choke and condenser 1 no 4'-40w tube with T.W. round block on wall or ceiling with pvc unsheated leads from terminals to the fittings

Supplying and fixing of suspension type twin fluorescent fitting with 2 Nos.4' 40W twin mirror optic suspension type fitting with copper choke and condenser enameled reflaxiation with bule

Supplying and fixing of 1400mm (54") sweep AC ceiling fan with regulator with 300mm down rod on the exisitng clamps of approved make including cost of all materials lead, lift etc., complete.

Supplying and fixing of 450 mm sweep AC Exhaust fan of approved ISI quality complete with necessary wall opening and making good of the wall

Supplying and fixing of water tight Bulk head fitting with guard ( philips, bajaj, k-lite, cromption greaves ) suitable for incondescent lamp with guard and 60 w bulp.

Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (like standard make).

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry .

Supply and fixing 1 no 4 way Three phase and natural distribution board with insulator and 1 No.MCB of 6 amps each of standard company as approved by the engineer including cost of all materials, lead, lift, etc., complete.

Supplying and fixing 32 Amps, 3 Phase main switch DPIC. of well known manufactures of approved make etc. including labour for Electrical connections etc, complete.

Supplying and fixing Copper 4 core 6sq.mm armoured PVC cable including cost of all materials labour, lead, lifts, EWE and refilling etc complete for service connection with accessories.

Supplying and fixing of RCCB safe trip of appd LEGRAND , ISI make , 25amps with suitable box including cost of all materials labour, lead, lift, etc., complete as per standard specification.

Supply and fixing of 3 phase 4 wire 4 way ICDB of 16A per way with 32 A TPN MC switch with suitable MS cable entry boxes trunking box and internal connections on suitable angle iron frame work etc. complete.

Supplying and fixing of 2 x 36 W FTL Street light fittings crompton make (SFE 1624 HSBN) including cost of all materials, labour, lead, lift etc., complete, as per standard specification.

Providing 300mm dia flower pots containg green plants as directed by the engineer

Supplying and fixing of ornamental design terracotta jolly in passage including cost of all materials ,transportation ,scaffolding and fixing in position using same colour mortar, lead lift etc.complete.

Aluminum composite panel works:Designing the system for cladding the external wall with approved make of aluminum composite panels --- 4mm thick(0.5 mm thick aluminum sheet on top and bottom sandwiched with 3 mm thick core material of anti toxic low density polyethylene) in combinaton with solid and metallic colour panels, by using pre-assemble extruded aluminum sections/brackets and aluminium composite panel to withstand design wind pressure of 150 kg/sqm (Testing pressure shall be 1.5 times of the design wind pressure of 150 kg/sqm) conforming to IS 875-Part III. The system shall be designed to accomodate thermal movement of the aluminium framing system including supporting arrangements.Fastening devices and composite panel resulting from the exterior skin temperature from 15 to 85 deg.celcius.Interior skin temperature from 15 to 30 deg. celcius and to accomodate horizontal buiding movement of maximum 10 mm per bay and vertical movement of maximum 20 mm between floors and conforming that no aluminium members shall be visible from outside.

Supplying and fixing in position of Aluminium dye cast powder coated letters of various sizes and emblem in 12m thick as per the requirement of Board including cost of all materials, aluminium letter, emble, scaffolding etc., complete as directed by the engineer at site.TNEB Emblem

Supplying and fixing in position of Aluminium dye cast powder coated letters of various sizes and emblem in 12m thick as per the requirement of Board including cost of all materials, aluminium letter, emble, scaffolding etc., complete as directed by the engineer at site.30cm size letters

Supplying and fixing in position of Aluminium dye cast powder coated letters of various sizes and emblem in 12m thick as per the requirement of Board including cost of all materials, aluminium letter, emble, scaffolding etc., complete as directed by the engineer at site.23 cm size letters

Supplying and fixing in position of Aluminium dye cast powder coated letters of various sizes and emblem in 12m thick as per the requirement of Board including cost of all materials, aluminium letter, emble, scaffolding etc., complete as directed by the engineer at site.15cm size letters

Providing two legged scafolding using 15 cm dia casuarinas post of 4 M over all length (3 M Height + 0.5 M Projection + 0.5 M into the Ground) the distance between the two rows being 1.25 M and the spacing of posts being 2.0 M in both rows with two horizontal posts with 0.5 M Overlap on either side and braces at 2.0 M Center to center including longitudinal and transverse middle braces to step up and providing a platform with country wood planks of 40 mm thick and 1 M width, etc.in a complete from using coil and nails.

Providing and Supplying of office funitures with Teak wood 1st quality Work top - fabricated out of 25 mm thick particle board duly post formed edges using 0.6 mm flex laminates including cost of all materials, labours, lead, lift ,T&P, Transpoting to site etc Complete.

Providing and Supplying of office funitures with Teak wood 1st quality Work top - fabricated out of 25 mm thick pre laminated particle board duly edge banded with 2 mm thick PVC beeding including cost of all materials, labours, lead, lift ,T&P, Transpoting to site etc Complete.

Providing and Supplying of office funitures with Teak wood 1st quality End Panel : Size : 725 mm x 400 mm - fabricated out of 25 mm thick Pre-laminated particle board duly edge banded with 2 mm thick PVC beeding including cost of all materials, labours, lead, lift ,T&P, Transpoting to site etc Complete.

Providing and Supplying of office funitures with Teak wood 1st quality Mobile Pedestal of Size : 400 mm x 450 mm x 640 mm [H] - Having Two Drawers + One filing drawer - fabricated out of 18 mm & 9 mm thick Pre-laminated particle board duly edge banded with 2 mm thick PVC beeding and provided with handle & lock.including cost of all materials, labours, lead, lift ,T&P, Transpoting to site etc Complete.

Supply and erection of RCC pre cast well rings of dia 1200mm, 300mm height and 50mm thick for construction of Rainwater Harvesting tank, Septic tank and Soak pit including cost of well rings, brick jelly, stone jelly 40,20,12,10mm and sand, etc., lead, lift, erection charges, labours etc., complete, as per direction and specification

Supply and erection of RCC pre cast well rings of dia 1200mm, 300mm height and 50mm thick supply andfixing of top cover suitable including cost of well rings, brick jelly, stone jelly 40,20,12,10mm and sand, etc., lead, lift, erection charges, labours etc., complete, as per direction and specification

Supply and erection of RCC pre cast well rings exhaust fan rings 300mm dia including cost of all etc., lead, lift, erection charges, labours etc., complete, as per direction and specification

Supplying and fixing fine polished cuddapah slab of following thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct.

Turfing on slope including cost of sand, gravel mix in 1:1 for a depth of 0.15 m and red earth, sand and cow dung mix in 1:1:1 for a depth of 0.15 m and pitching of Korean grass including cost of all materials, watering, lead, lift, labour and T & P, etc., complete.

CGST in % (For Bidders inside TamilNadu)

SGST in % (For Bidders inside TamilNadu)

IGST in % (For Bidders outside TamilNadu)

M/s.V.APPU ENTERPRISES (BID ID -1470819)