SPECIAL REPAIR TO DINING HALL, COOK HOUSE AND STORE ROOM (BLDG No P-52, P-53 AND T-41) AT INS CHILKA

Amount

M&L for 15mm thick cement screed or bedding layer in cement mortar 1:4 on concrete or bricks surface finished even and smooth without using extra cement to receive roof/sunken treatment, mixed with water proofing compound @200 ml per 50 kg by weight of cement over and including a neat cement slurry @ 3 Kg/Sqm over cleaned roof surface and including taking down existing waterproofing treatment complete of any description by scrapping including removal of rubbish where directed to a distance not exceeding 100 m, complete all as specified and directed. Note : Liquid water proofing compound shall be measured and paid separately.

Supply only liquid water proofing compound.

M&L for water proofing roof treatment, consists of a five layered APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick and minimum weight not less than 3.0 Kg/sqm, reinforced with polyster non woven fabric matt (weight not less than 150 gm/sqm), laid with LPG torch forced application over roof surface, with a side & end overlaps of minimum 100 mm, with and including priming the surface and applied with a coat of hot blown bitumen of grade 85/25 @ 1.2 kg/Sqm each at top and bottom of the membrane as bonding material, and a coat of bituminous aluminium primer @ 100 gm/Sqm on top, and including sealing all joints by thermo fusion. Polymeric membrane shall be taken to a height of 30 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing complete all as per manufacturer's instructions and all as specified and directed.

Roughening surfaces of old concrete floor and of plaster of wall by picking, sweeping clean and washing down with water to remove dust, etc.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth of any and applying one coat of synthetic enamel paint of approved shade complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over 15mm thick screed in CM (1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror tinoxide polishing complete all as specified and directed.

M&L Machine cut kota stone slab 20-25mm thick over 15mm thick screed in CM (1:4) as in riser of steps, skirting, dado and pillar laid jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror tinoxide polishing complete all as specified and directed.

M&L 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms over 15mm screed bed of cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 Sqm but not exc 0.18 sqm, in floors etc. Including on skirting upto 150 mm height, set and joint in neat cement slurry and pointed in white or colour cement to match the tiles over 15 mm thick screed in CM (1:4) complete all as specified and directed

S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 Sqm but not exc 0.36 sqm, in floors etc set and joint in neat cement slurry and pointed in white or colour cement to match including 15mm thick rendering in CM 1:4 complete all as specified and directed

S&F Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match such as skirting / dado tiles including backing coat of 10mm thick in cement mortar 1:4 complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off shutters from the frames) removing to or from store complete all as specified and as directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each but with shutters (without taking off shutters from the frames)removing to or from store complete all as specified and as directed.

M&L Marble "Makrana white" work 16 to 18mm thick (table rubbed and polished) laid in floors, steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) and including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade laid over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS 733 and IS-1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gaskey, etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, CP brass/stainless steel screws, all complete as per architectural drawings and as directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid seperately) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubbber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jounted mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, locks for sliding windows, rollers, CP brass/ stainless steel screws etc required for functioning of sliding/fixed shutters all complete as per architectural drawings and directed.

S&F sheet glass 4mm thick, ordinary quality and glazing with beads fixed with metal panel in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F 4 mm thick frosted on one side sheet glass and glazing with aluminium snap beading fixed with metal panel in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F sheet glass 5.5 mm thick, ordinary quality and glazing with beads fixed with metal panel in square n exc 0.5 sq. m in each pane all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including necessary beadings complete all as specified and directed

M&L 18 to 19 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work all as specified and directed.

S&F Aluminium anodised powder coated of any colour (thickness of powder coating not less than 15 micron) with Deco grill aperature size 50X50mm fixed with suitable channel for windows/ventelator fixing arrangements all as specified and directed.

S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, all as specified and directed.

S&F 2nd class hard wood, 35 mm thickness of plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats all as specified and directed.

S&F 2nd class hardwood plain, 35mm thickness of shutter Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc divided into sqares with plain ,with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass ,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC Sheet & edges will be painted to match with prelam sheet, reinforced with MS Square tube supplying & fixing in opening as per specification.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) considering of frame made out of MS tubes for top & bottom rails M.S frame shall be covered with heat moulded both side Prelam PVC sheet used PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification.

S&F medium weight, stainless steel butt hinges of 100mm size, complete all as specified and directed.

S&F extruded aluminium alloy handles, 125mm long fabricated type, anodised complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section, length of bolt 125mm with dia of shoot / bolt 10mm complete all as specified and directed.

S&F 250 mm long aluminium anodised, sliding door bolts, with haps staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts not less than 16mm dia of shoot / bolt of sxtruded section or cast aluminium alloy complete all as specified and directed.

S&F in repair 300 mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F 4 levers mortice lock brass, vertical type, size 100mm complete all as specified and directed.

S&F in repairs door closer, hydraulically regulated, designation No. 3, universal type suitable for door shutters of weight between 61 to 80 Kg with aluminium (die cast) body, complete all as specified and directed.

S&F floor door stopper 150mm overall length of cover plate of brass body and tongue with hard drawn steel spring, fixed in floor complete all as specified and directed.

M&L for preparation of new painted wooden surfaces of any description not otherwise described over 10 cm width or girth of any and applying two coat of synthetic enamel paint over coat of primer of approved shade complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening Fe 410 -W (Gde- E- 250) quality-A and fixing complete all as specified and directed.

M&L for mild steel framed work of angle, flat iron etc , for fixing wire mesh , as in grill , railing , frame work for water tank and similar work, confirming to Fe-290 Gde E-165 complete all as specified and directed.

S&F Mild 11 to 15 mm dia of neck of steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long long complete all as specified and directed.

S&F 50 mm x 50 mm mesh size (nominal size of pitch of wires) 4 mm dia of welded steel wire n exc 4 Kg/Sqm fabric supplied and fixed to wood or steel members complete all as specified and directed.

M&L preparation of new painted steel surfaces of any description not otherwise described over 10 cm width or girth of any and applying two coat of synthetic enamel paint over priming with red oxide of approved shade complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick or concrete sufaces in cement mortar 1:4 mixed with liquid water proofing compound @ 200 ml per 50 kg by weight of cement content including finishing even and smooth withour using extra cement and including taking down complete all as specified and directed. Note :- Liquid water proofing compound shall be measured and paid separately.

M&L rendering 10 mm thick on fair faces of brick or concrete sufaces in cement mortar 1:6 including finishing even and smooth withour using extra cement and including taking down complete all as specified and directed.

M&L 5 mm thick rendering in cement mortar 1:3 on concrete surfaces as in ceiling including finishing the surfaces even and smooth without using extra cement and including taking down complete all as specified and directed.

M&L preparation of new plastered external wall with two coat of Acrylic Smooth exterior paint applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) as per manufacturer's instruction as per required shade by user complete all as specified and directed.

M&L preparation of newly plastered or unplastered surfaces of walls and including applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coats oil bound distemper over a coat of chalk whiting primer complete all as specified and directed.

M&L preparation of newly plastered or unplastered surfaces of wall and including applying three coats white wash complete all as specified and directed.

M&L preparation of newly plastered or unplastered surfaces of ceilings and including applying three coats white wash complete all as specified and directed.

M&L complete removal of existing treatment from old decorated plastered surface of wall, removal of nails etc & filling cracks/hole with putty and including applying two coats of exterior emulsion over a coat of primer as per manufacturer's instruction as per required shade by user complete all as specified and directed.

M&L complete removal of existing treatment from old decorated plastered surface of wall and stopping of distempered surfaces by brooming down or steel wire brushing, scraping down moulds, mass and efflorenscent salts and greasy spots of wall and including preparation of surface, applying two coats of oil emulsion distemper over a coat of primer laid over and including 1 mm thick plaster of paris putty complete all as specified and directed.

M&L complete removal of existing treatment from old decorated plastered surface of wall and applying three coats of white wash on walls complete all as specified and directed.

M&L preparation of old decorated plasterted surfaces of ceiling by brooming down or steel wire brushing, scraping down moulds, mass and efflorenscent salts and gressy spots and applying two coats of white wash on ceiling complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M&L old size brick work with fly ash bricks, straight or curved on plain exc. 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L old size brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.

M&L providing, cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) in lintels upto 1.5 m clear span, cills, steps; seismic , chajja and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs incl necessary form work complete all as specified and directed.

Demolition of reinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed.

S&F in repair sinks without drainage board made of stainless steel 1mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 610 x 460 x 229 mm, bowl size 560 x 406 x 229 mm complete all as specified and directed.

S&F in repair 32 mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end used for WHB/sink complete all specified and directed.

S&F in repair wash hand basin vitreous china white flat back of size 580 X 450mm with brackets, complete including 15 mm bore facny pillar tap CP complete all as specified and directed.

S&F in repair water closet pedestal vitreous china white pattern (EWC) including white colour seat cover and connection to drain and to flush pipe & mild steel chromium plated or aluminised hinging device etc (excluding flushing cistern and flush pipe) including 100mm bore traps P or S complete all as specified and directed.

S&F in repairs PVC low level flushing cistern of 10 ltr capacity fixed including syphonic action type, ball valve, float and handle including brackets etc complete all as specified and directed.

S&F in repairs PVC connections 15 mm size with PTMT nuts and washers for 600mm long pipe complete all as specified and directed.

S&F in repairs 15 mm bore dia CP two way bib tap cast copper alloy fancy type screwed down high pressure, with long shank screwed and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position in all respect complete all as specified and directed.

S&F in repairs PVC soap tray fixing with screw complete all as specified and directed.

S&F CP tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all specified and directred.

S&F in repairs angle valves of 15 mm dia chromium plated fancy type screwed down high pressure screwed at the ends for iron pipe or union with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 32 mm dia size PVC waste pipe for wash hand basin complete all as specified and directed.

S&F in repair PVC floor trap including jointing with solvent cement to waste pipe 75 mm dia complete all as specified and directed.

S&F in repairs 102mm dia grating doom of fancy chromium plated complete all as specified and directed. Make : Prayag Cat No -FT-03

S&F in repair Shower rose brass chromium plated of size 125 mm with swivel joint fixing to GI pipe of 15mm dia incuding GI Elbow and nipple complete all as specified and directed.

S&F in repairs stop valves of 15 mm dia chromium plated fancy type screwed down high pressure screwed at the ends for iron pipe or union with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed concealed type complete all as specified and directed.

S&F in repairs CP Bib taps in 15 mm dia chromium plated cast copper alloy of fancy type screwed down for iron pipe complete all as specified and directed.

S&F in repairs vitreous china urinal bowl flat back of size 465 X 355 X 265mm white with grating,union and waste coupling including fixing plugs, beding urinal against wall in CM 1:2 securing urinals to plugs including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

S&F in repair 15 mm dia bore of pipe Push tap any colour high pressure of PTMT screwed for iron pipe and fixed, (Minimum weight 15mm-47gms) complete all as specified and directed.

S&F 5000 ltr capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including provision of inlet, outlet overflow and wash out connections and dismantling water tank and removing to store complete all as specified and directed.

S&F 2000 ltr capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including provision of inlet, outlet overflow and wash out connections and taking down the unserviceable tank complete all as specified and directed.

S&F 500 ltr capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including provision of inlet, outlet overflow and wash out connections and taking down the unserviceable tank complete all as specified and directed.

S&F in repair 25 mm dia bore of pipe Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms) complete all as specified and directed.

S&F in repair gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repairs of size 25 mm dia/bore complete all as specified and directed.

Taking up or down 25 mm bore of pipe steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and directed.

Taking up or down 20 mm bore of pipe steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and directed.

Taking up or down 15 mm bore of pipe steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and directed.

S&F GI tubes, 'medium grade' galvanised, with all fittings and fixed in 25 mm bore of pipe complete to walls and ceilings complete all as specified and directed.

S&F GI tubes, 'medium grade' galvanised, with all fittings and fixed in 20 mm bore of pipe complete to walls and ceilings complete all as specified and directed.

S&F GI tubes, 'medium grade' galvanised, with all fittings and fixed in 15 mm bore of pipe complete to walls and ceilings complete all as specified and directed.

Refixing old 25 mm bore of pipe steel tubing and connections in new or old position (Walls, ceiling, floors) including cleaning for refixing complete all as specified and directed.

Refixing old 20 mm bore of pipe steel tubing and connections in new or old position (Walls, ceiling, floors) including cleaning for refixing complete all as specified and directed.

Refixing old 15 mm bore of pipe steel tubing and connections in new or old position (Walls, ceiling, floors) including cleaning for refixing complete all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls & floors 110 mm bore and including taking down complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls & floors 75 mm bore and including taking down complete all as specified and directed.

S&F 110 bore PVC (SWR) bends any radius complete all as specified and directed

S&F 110 bore PVC (SWR) vent cowl complete all as specified and directed

S&F 75 bore PVC (SWR) bends any radius complete all as specified and directed

S&F 110 bore PVC (SWR) bends with access door any radius complete all as specified and directed

S&F in repair 75 bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and including dismantling complete all as specified and directed.

M&L steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS1161- 1979 grade St.-240 complete all as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for and removing the debris to a distance exc. 1.0 Km but n exc 1.50 Km from site complete all as specified and directed.

M&L 75 mm thick cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate as sub base of flooring complete all as specified and directed.

M&L 40 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregate complete all as specified and directed.

M&L 75 mm thick PCC type C2 1:3:6 (40 mm grade aggregate) as in plinth protection complete all as specified and directed.

Excavating in post holes in soft/ loose soil (or similar holes) each n exc 0.5 cu. m, getting out in , returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50M and making good surface complete all as specified and directed.

M&L Machine pressed precast conctete interlocking paver block with grey cement and pigment of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L sand cushioning under Inter locking paver block complete all as specified and directed.

M&L for point wiring with 1.5sqmm PVC insulated unsheathed multistranded copper cable of FRLS grade with one run of 1.5sqmm PVC insulated copper cable as earth continuity drawn in Concealed PVC conduit not less than 20mm dia including pressed steel consealed MS box duly covered with modulor sheets for mounting switches/Sockets, accessories such as spacers, saddles, junction boxes for one light / fan point controlled by one switch and including taking down complete all as specified and directed. Note : Groove Cutting ,pinning and plastering of distrubed surface rate included in rate quoted.

All as per item No 111 above but, one socket outlet, three pin, 5/6 Amp on the same board with other switches

All as per item No.111 above but with 4.0 sqmm PVC insulated unsheathed multistranded copper FRLS grade cable with one run of 4.0 sqmm PVC insulated copper cable as earth continuity for power socket on independent board.

M&L sub main wiring with 2 runs of 4 sqmm PVC insulated unsehathed copper cable multistand 1100 V of FRLS grade with drawn in concealed PVC conduit not less than 25mm dia and one run of PVC insulated serviceable of 4 sqmm as earth continuity conductor drawn in PVC conduit / casing and capping with accessories and including taking down complete all as specified and directed. NOTE: 2 runs of 4 Sqmm, 1 run of 4.0 Sqmm and 1 run of conduit will be measured as one unit

M&L sub main wiring with 2 runs of 6 sqmm PVC insulated unsehathed copper cable multistand 1100 V of FRLS grade with drawn in concealed PVC conduit conduit not less than 25mm dia and one run of PVC insulated serviceable of6 sqmm as earth continuity conductor drawn in PVC conduit / casing and capping with accessories and including taking down complete all as specified and directed. NOTE: 2 runs of 6 Sqmm, 1 run of 6 Sqmm and 1 run of conduit will be measured as one unit

M&L sub main wiring with 4 runs of 6 sqmm PVC insulated unsehathed copper cable multistand 1100 V of FRLS grade with drawn in concealed PVC conduit not less than 25mm dia and one run of PVC insulated serviceable of 6 sqmm as earth continuity conductor drawn in PVC conduit / casing and capping with accessories and including taking down complete all as specified and directed. NOTE: 4 runs of 6 Sqmm, 2 run of 6 Sqmm and 1 run of conduit will be measured as one unit

M&L sub main wiring with 4 runs of 4 sqmm PVC insulated unsehathed copper cable multistand 1100 V of FRLS grade with drawn in concealed PVC conduit not less than 25 mm dia and two run of PVC insulated serviceable of 4 sqmm as earth continuity conductor drawn in PVC conduit / casing and capping with accessories and including taking down complete all as specified and directed. NOTE: 4 runs of 4 Sqmm, 2 run of 4Sqmm and 1 run of conduit will be measured as one unit

S&F Modular switch 1 Way 6A, 1Module complete all as specified and directed.

S&F Modular Switch sockets combination 5 A, 3/5 Pin, 3 module complete all as specified and directed

Supply and fixing Modular Switch sockets combination 16 A, 6 Pin, 3 module complete all as specified and directed.

S&F ceiling rose surface backlite 3 terminals 65X50mm 230V including PVC Box of size 3"X3" round type complete all as specified and directed.

S&F 5 step Modular fan regulator, 120 W-2 module complete all as specified and directed.

Taking down defective exhaust fan 300 mm sweep from its position and refixing with louvers the same after repairs including 3 core flexible copper wire from ceiling rose to fan complete all as specified and directed.

M&L for painting of exhaust fans with blade complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed.

M&L for Rewinding of exhaust fan motor of type 300/450 mm sweep & any make, with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts & washers, split pins etc. complete all as specified and directed.

S&F in replacement of Exhaust fan capacitor/condensers 4.0 mfd of approved make complete all as specified and directed.

Taking down defective ceiling fan from its position and refixing the same after repairs complete all as specified and directed.

M&L for painting of ceiling fans with blade complete, insitu with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed.

Rewinding of ceiling fan motor of type 1200mm sweep & any make, with super enameled copper wire of appropriate gauge including replacement of insulating materials such as laminated lethroid paper, sleeves, necessary varnishing with golden colour varnish, greasing the bearings, replacement of missing / worn out nuts, bolts & washers, split pins etc. complete all as specified and directed.

S&F in repair ceiling fan capacitor/condensers 2.50 mfd of approved make complete all as specified and directed.

S&F in replacement of new ball bearing 6201 / 6202 / 6203 including metal filling, machining if required, complete all as specified and directed.

S&F in replacement of fan clamp with nut & bolt and rubber bush suitable for ceiling fan of any sweep and make, complete all as specified and directed.

S&F in replacement of 4ft Smart Brite Compact LED Smartbrite Batten maximum 20w, Slim LED batten with polycarbonate housing and diffuser is an ideal replacement solution for existing battens/fluorescent lamps with elegantly designed end caps. complete fitting complete all as specified and directed. Make: Orientr Cat No: LBLN-20-C-SQ or equivalent in CG/philips

S&F in replacement LED retrofit lamp 9/10 Watt having B22 holder base with polycarbonate body and aluminium heat sink complete all as specified and directed.

S&F in replacement lamp holder PVC/ PolyCarbonate type with back plate for LED bulb of any type complete all as specified and directed.

S&F in replacement 10 W tubelight fitting with lamp, Trim Linea Neu is a PC batten, compact appearance, simple and versatile in nature makes it as long lasting, efficient solution for offices and other commercial spaces. Efficacy: 100 lm/WA with fitting complete all as specified and directed. Make: Orient Cat No LBLN-10-C-SQ or equvalent to Philips/CG

S&F in repair Building security light fitting 25 Watt new compact designed, ASTRA NEO street lights are made up of pressure die cast housing with toughened glass and high power LED's with secondary optics and IP65 protection. Efficacy ≥ 110LPW.including provn of necessary connection complete all as specified and directed. (Make/ Model:- Crompton(ASTRA NEO), Cat No . LSTS-25-CDL-M or equvalent to Phillips/Havells/Orient)

S&F gate light 20 watt LED lamp, made up of high grade unbreakable polycarbonate material suitable for retrofit LED lamp B22 base including fitting base arrengement and LED bulb and holder as per site requirement complete all as specified and directed. Make: Orient Cat part No.-LBLN-20-C-SQ or equvalent to Phillips/Crompton

S&F in replacement sheet metal enclosure single pole and neutral enclosure with two pin and earth plug and socket complete with one SPN MCB 20 Amps capacity.

Taking down carefully old unserviceable MCB DBs any type by unscrewing from wall, ceiling and making good surfaces to match with original status complete all as specified and directed.

S & F MCB DB double door SPN 12 Way with 200 Amps rated copper bus bar 240 Volt, IP 43- Metal door complete all as specified and directed

S&F MCB SP 6 to 32 Amp, 240 Volt C curve complete all as specified and directed.

S&F MCB SPN 40 Amp, 240 Volt C curve. complete all as specified and directed. Make: Havells/Legrand/L&T.

S&F in replacement MCB DB 4 way TPN with 200 A rated bus bar,415 Volts, Double door complete all as specified and directed.

Taking down carefully old unserviceable MCB any type by unscrewing from wall, ceiling and making good surfaces to match with original status complete all as specified and directed.

S&F in replacement MCB four pole 40 to 100 Amps 415 volt 50 Hz complete all as specified and directed.

S&F Vertical DBs WITH MCCB 8 way provision for FP MCCB 100 Amps Incomer in 36kA as Incomer complete all as specified and directed.

S&F in replacement MCCB 100 Amps 36 KA 4 pole 415 Volts 50 HZ complete all as specified and directed.

M&L earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 M below ground level connected with galvanised earth wire 4 mm dia by means of bolts nuts check nuts and washers of galvanised iron to earth test point all as specified or indicated including necessary excavation and earth work any type of soil PCC (1:3:6) watering funnel, GI tubing 20 mm for watering complete all as specified and directed and all as shown in electrical plate No.3 of SSR part 1 complete all as specified and directed.

S&F GI Sheet 20/22 SWG to fix on cable tray for cover the cable etc. Including reviets/nut bolts complete all as specified and directed.

S&F of Angle iron / flat iron for supporting of cable/cable tray complete all as specified and directed.

S&F 3mm thick aluminium clading to existing cable trunking to stucco for plain of approved colour shade as required cutting, notching to shape and jointing aluminium tublar section as required complete all as specified and directed.

S& F of GI Cable tray perforated type, 2mm thick of size 600mmx50mm and including all fixing arrangement complete all as specified and directed.

Taking down the storage type water heater of any type & size, by disconnecting electric connection, carrying out necessary repair such as cleaning of inner water tank, removing scales,connecting flexible three core copper cable of size 2.5 sqmm and re - fixing in original position, grouting, testing and commissioning, complete all as specified and directed. Notes : Spares replaced shall be measured and paid seperately under supply only under relevant item of this schedule.

Supply only indicating lamp for geyser, including dismantling the existing u/s element, complete all as specified and directed.

Supply only heating element 2000 Watt capacity, 230 Volts, round / triangle base suitable for existing water heater of 50 ltr capacity complete all as specified and directed.

Supply only heating element 1500 Watt capacity, 230 Volts, round / triangle base suitable for existing water heater of 25 ltr capacity complete all as specified and directed.

Supply only Thermostat of capacity 1500/2000Watt for geyser of any capacity complete all as specified and directed.

M&L for spray painting with white synthetic enameled paint after preparation of old surface of geyser of any make/model., complete all as specified and directed.

S&F in replacement DP switch of 32 Amps, 230 volts with indicating lamp complete all as specified and directed.

S&F in replacement 3 pin plug top of 15 Amp, complete all as specified and directed.

S&F in replacement 15 mm dia hot & cold PVC flexible connections (heavy duty) with two Nos brass nuts with washer at both ends of 450 mm long, in repair, complete all as specified.

S&F in replacement GI pipe medium grade of 15 mm dia with all fittings such as bends, elbow,tees,short pieces, connector , back-nuts, diminishing pieces, caps, plugs and unions, etc. complete all as specified and directed.

S&F in replacement stop valves of 15 mm size, cast copper alloy, screwed down, high pressure with crunch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in replacement of factory made sheet metal enclosure with protected type 2 pin and earth plug and complete socket with one MCB SP 240 volt, 20 Amps complete all as specified and directed.

S&F in repair of GI pipe Bracket of 40 mm dia Medium grade pipe bend to shape of approx length 1.5 Mtr including 2 no. MS Clamp of flat iron size 40x6 mm complete with nut, bolt, washers complete all as specified and directed.

Supply, installing, testing and commissioning of Outdoor type LT panel board of suitable size, pedestal mounted, CPRI approved totally enclosed, dust and vermin proof, front and back side openable, type IP 54 protection made of CRCA sheet 3.15 mm thick of size as per IS and having proper locking arrangement in front side door suitable for 440 volts, 50 Hz, 3 phase 4 wire system having Aluminium Bus Bar of 400 Amps including cable glands of suitable size for incoming and outgoing cables and comprising with and including following accessories and mounted on PCC Plat form min 30 cm from ground level and grouted in PCC 1:3:6, 100 mm thick, 0.25 m all round the panel board and including taking down complete with the following items housed in :-

(a) Incoming:- (i) MCCB 250 Amps,(Thermal & Magnetic Adjustable) 4 pole, 36 KA, 415 V - 01 Nos Make L & T or its equivalent in Schneider or legrand (ii) LED Multi function with AMMETER (3 N0S ) and VOLLTMETERs. - 01 Nos (iii) LED indicating lamp next Gen dia 22.5mm (6 Nos) (b) Outgoing :- (i) MCCB 100 Amps (Thermal & Magnetic Adjustable ), 4 pole, 25 KA, 440V - 05 Nos Make L&T or its equivalent in Schneider or legrand (ii) MCB TPN 40 Amps, 4 pole, 10 KA, C Curve, 440V - 02 Nos

Supply & laying of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3.5 core complete all as specified and directed.

Supply & laying of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core complete all as specified and directed.

Supply & laying of XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core complete all as specified and directed.

Supply & laying of cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete all as specified and directed.

M&L in repair Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly and preferably vertically in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level, using galvanised iron strip 32×6mm as earthing lead (upto 7.5 M in length from earth plate) by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3, connected to earthing with DBs all as specified including earth work and excavation in any type of soil, PCC 1:3:6 type C1 chamber & RCC 1:2:4 type B1 cover 40 mm thick, with 8 mm dia steel deformed (TMT bars) reinforcement at 150mm c/c both ways, 20 mm dia GI medium grade pipe for watering , water funnel complete all as specified and testing on completion.

Excavation in trenches in soft/loose soil n.exc 1.5m wide and n. exc 1.5m depth getting out of soil for taking out or laying of pipe line etc complete all as specified and directedfor laying of cable, errection of poles, stay and pipe line, complete all as specified and as directed.

Returning & filling including spreading, leveling watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified.

Removal of surplus soil to a distance n. exc 50 m above the starting point complete all as specified.

S&F HDPE double wall pipe corugated pipe of size 90mm outer dia for cable protection laid in trenches in lieu of sand/brick protection complete all as specified and directed.

S&F HDPE double wall pipe corugated pipe of size 110 mm outer dia incliding coupler for cable protection laid in trenches in lieu of sand/brick protection complete all as specified and directed.

S&F GI tubing light grade of 50 mm dia for cable protection on pole/wall/floor etc complete with necessary clamp, nut, bolts and washers and socket and making good the disturbed surface of wall , floor or roof etc complete all as specified and directed.

Taking down carefully burnt and unserviceable UG cable any size and any capacity from trench, wall, floor, surface and pipe complete all as specified and directed.

Sri Surya Enterprises (BID ID -3183815)

srisampathassociates (BID ID -3183799)

RANA ENTERPRISES (BID ID -3184723)

M/S.J.BIJAYA KUMAR PATRO (BID ID -3184085)

S R CONSTRUCTIONS (BID ID -3184761)

SOUTHERN BUILDERS (BID ID -3184395)

S A R CONSTRUCTIONS (BID ID -3184359)

VIJAY VINAYAKA INFRA (BID ID -3184381)

GAGANSRI INFRA (BID ID -3183503)