CWE/P-55/2025-26

Amount

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) n exc. 1.50 Sqm each including taking out hold fast, complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each including taking out hold fast, complete all as specified and directed.

Taking down shutters of any description exc 1Sqm but n exc 2Sqm each, complete all as specified and directed.

S&F pressed steel frame for door made out of MS sheet 1.25mm thick of size 105mmx60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkats complete all as specified and directed.

S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S & F floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor over all length of cover plate 140mm thick complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia andlength complete as per direction ofEngineer-in-Charge. (M.S. hold fast/ lugsor SS dash fasteners shall be paid forseparately). → Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall beacceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made

S&F Factory made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles) with 2 mm thick moulded prelam PVC sheet on the front face and 2 mm prelam PVC sheet on back face, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F prelaminated 18mm thick lead free factory made 100% solid WPC (wood polymer composite) sheet having high natural fiber content 25 to 30% wood colour sheets with density not less than 500 Kg/Cum and the weight of sheet of 1 sqm should be 11 Kg (+-5%) manufactured by ISO 9001-2015 certified company the sheet should be 100% water proof termite proof, fire retardent, manufactured by single layer extrusion process with excellent screw holding capacity and shore D hardness complete including all fittings like handle, hinges, hydraulic stopper, beading complete all as specified and directed.

S&F in repairs Stainless steel butt hinges 100mm, stainless steel complete all as specified and directed.

S&F in rerpairs Stainless steel 125mm size, stainless steel handles, fabricated type, anodised, complete all as specified and directed.

S&F in repairs150mm size,stainless steel handles complete all as specified and directed.

S&F in repairs 150mm long stainless steel tower bolts (ISI Marked) extruded type complete all as specified and directed.

S&F in repair, 250mm, mild steel helical door spring, ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified.

S&F 250mm long stainless steel sliding door bolt type with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate two on staple plate etc, complete all as specified and directed.

S&F Galvanised stainless steel wire cloth 0.46mm of nominal dia of each wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples/wodden bedding etc, complete all as specified and directed.

S & F Windows, Ventilators fabricated from roll formed sections made of Galvanized Steel Colour Coated/ Powder Coated (Base Steel as per IS 513 “D” quality, Galvanized as per IS 277 with Zinc of 120 grams/ Sqr. Mtr.) with total coated thickness of 0.60 mm Paint specifications: - Coated Sections should be coated with Primer Coat of Epoxy Primer of 5-7 microns thick, finish painted with Polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, or Powder Coated with pure Polyester Powder up to 50-60 microns thick. Dimensions of Sections: - Sections for Frame should be of 72mm X 50mm, Section for Mullion should be of 72mmX50mm, Section for Shutter Frame should be of 47mm X 20mm, Section for Fixed Glass Bead should be of 12mmX12mm, and Section for Fly mesh should be of 40mm X 20mm. Fixing Details:- Section for Frame Glazed Shutters and Mesh Shutters should be cut to length and miter joined with Polypropylene Corner Brackets, Mullion Section should be joined to the Frame/ Mullion using Nylon cap. Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass in shutter and Fixed Glass. Spoon profile should be used around Fly mesh to fix Mesh in Mesh Shutter. Accessories:- Each Glazed Shutter should be provided with S.S. Pivot Hinges-1set, Seccolor Handle & Seccolor Stay. Window frame should be fix to brick/concrete masonary by using Nylon-self expanding caps & driving MS electroplated 80mm long screws into the caps through frame. Glass:- Glass shutter & fixed glass portions should be provieded with a glass of 5mm plain float glass. Mesh:- Mesh shutter should be provided with a stainless steel 32 Gauge fly mesh of 304 grades with 144 holes per square inch. Grill:- Window should be provided with grill made of 10 mm Sq MS bars welded to at 150 mm centre to centre, 6mm x 12mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws.

S&F MS window handle 125mm fixed in repairs with nut or bolt to steel window fixed at any height etc, complete all as specified and directed.

supply and fixing in repairs any type of window hinges for steel window in lieu of broken projected type hinges or any type by welding of suitable size at site at any height (i.e. two storeyed) etc, complete all as specified and directed.

M&L for preparation of new wooden surface of any description exc 10cm width or girth and applying two coat of synthetic enamel paint over coat pink primer etc, complete all as specified and directed.

M&L for preparation of old painted steel surface of any description exc 10cm width or girth and applying one coat of synthetic enamel paint etc, complete all as specified and directed.

M&L for preparation of old painted wooden surface of any description exc 10cm width or girth and applying one coat of synthetic enamel paint etc, complete all as specified and directed.

M&L for complete removal old paint/varnishing from wooden surface by burning and applying two coat of varnishing on old wooden surface of any description and in any position over 10cm in width or girth etc, complete all as specified and directed.

Demolition of Brickwork or stone/ boulders masonry built in cement or cement lime mortar incl all quions, arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles, etc, complete all as specified and directed.

M&L for Brickwork with old size bricks, straight or curved on plan exc 6m mean radius, built in cm (1:6) etc, complete all as specified and directed.

S&F, 110mm bore, PVC rainwater (SWR) drainage pipes single socketed, in any length with rubber ring joints as in repair, fixed to walls with clamps complete all as specified and directed.including taking down of old unserviceable rain water pipe of any dia and position etc, complete all as specified and directed.

S&F for 110mm bore pipes,PVC (SWR) bends any radius fitting fo PVC (SWR) pipes as in repair etc, complete all as specified and directed.

S & F in repair for Toilet Duct Pipelines for Domestic Water Pipes downtake pipes fixing done with Pipe Supporting Clamping System having Mono Bracket + U Bolt R/M System - 1. Domestic Water Supply Down take lines 3/4" GI - 1 nos. from 1st Floor to Ground Floor Vertical Fixed line with wall distance 2": Pipe Support Clamping made of 1. Mono Bracket with slot Wall Distance 2" for 3/4" GI pipe made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 48 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs. 2. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing as per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty.: 1. Mono Bracket with Slot Wall distance 2" for 3/4" GI pipe - 1 Nos. 2. U Bolt R/M for 3/4" GI pipe Dia. - 1 nos. 3. Justi Khilla GI coated 2 1/2" - 2 nos. Pipe Support Clamping Unit fixing to be done at every metre distance in the duct as specified in the Technical Drawing. Refer CE Jaipur Zone Technical Drawing no. TD/2022/01. Make : Shaivi or equivalent as approved by GE.

S & F in repair for Bathroom Duct Pipelines for Waste Water Pipe downtake pipes fixing done with Pipe Supporting Clamping System having Profile Bracket + Slotted C Channel + U Bolt R/M System - 1. Waste Water Pipe 4" PVC Down take running from 1st Floor to Ground Floor Vertical Fixed line with wall distance 3": Pipe Support Clamping made of 1. Profile Bracket Wall Distance 3" made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result above 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Slotted "C" Channel B3 Type to be used of size 10" (Continuous Slotted "C" Channel with ribs) made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt R/M are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing as per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty.: 1. Profile Bracket Wall distance 3" - 2 Nos. 2. Continuous Slotted C Channel of B3 Type Size 10" - 1 No.; 3. U Bolt R/M for 4" PVC Pipe Dia. - 1 nos. and 4. Justi Khilla GI coated 2 1/2" - 4 nos. Pipe Support Clamping Unit fixing to be done at every metre distance in the duct as specified in the Technical Drawing. Refer CE Jaipur Zone Technical Drawing no. TD/2022/01. Make : Shaivi or equivalent as approved by GE.

M&L for taking down cement plaster on brick or concrete surface and description including raking out joints hacking for key scrubbing down with water, etc, complete all as specified and directed.

M&L Rendering 10mm thick in cement mortar 1:6 on fair aces of brick work or concrete surfaces of wall finishing the surface even and smooth without using extra cement etc, complete all as specified and directed.

M&L Rendering 15mm thick in two layers (base layer 10mm & finishing layer 5mm thick) in cement mortar (1:4) using liquid water proofing compound in finishing layer on brick work or concrete surfaces of wall, surfaces finished even and smooth without using extra cement complete all as specified & directed. (Note : WPC shall be measured and paid separately)

M&L Rendering 5mm thick in cement mortar 1:3 in, ceiling and roof projection making the line in true shape finished even and smooth without using extra cement as in ceiling complete all as specified.

M&L for two coat of OBD on ceiling including preparation of new plastered surfaces etc complete all as specified and directed.

M&L preparation of existing distempered surfaces of ceiling by complete removal of existing treatment and apply two coats of distemper oil emulsion (OBD) over a coat of cement wall primer (from same manufacturer of OBD) etc complete all as specified and directed.

Preparation of existing distempered surfaces of walls by complete removal of existing treatment and apply two coats of plastic emulsion paint over a coat of primer (from same manufacturer of plastic emulsion paint ) over a layer of wall care putty not less than 2mm thick etc complete all as specified and directed.

Preparation of new surfaces of walls and apply two coats of plastic emulsion paint over a coat of primer (from same manufacturer of plastic emulsion paint ) over a layer of wall care putty not less than 2mm thick etc complete all as specified and directed.

M&L for complete removal of existing treatment and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces directed. Note :- (a) Height of Bldg : any height (b) Exterior acrylic emulsion paint shall be anit-fungal, dust resistant, water repellant, crack-bridging, weather proof type 1st Quality.

M&L 75mm thick plain cement concret type C-2 1:3:6 (using 40mm graded crushed stone aggregate) as in flooring/Sub base/Plinth protection finishing cement concrete surfaces even and smooth without using extra cement complete all as specified and directed.

M&L Non-skid ceramic coloured tiles 7mm to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc, set & jointed in neat cement slurry and pointed in coloured epoxy grout to match laid over and including 15mm thick screed bed or bedding layer of cement mortar (1:4), including dismantling of floor tiling including cement motor bedding (but not backing) and removal of debris out off premises etc complete all as specified and directed

M&L Glazed ceramic (coloured) tiles 7mm thick, area of each tile exc 0.11sqm but not exc. 0.18 Sqm on vertical surfaces such as dado etc, set and jointed in neat cement slurry and pointed in coloured epoxy grout to match tiles over and including 10mm thick backing coat in cement mortar (1:4), surface finished even and rough to receive tiles, including dismantling existing tiles of any type and pattern including cement mortar backing coat and removal of rubbish out off the premises, etc complete all as specified and directed.

M&L double charged Vitrified ceramic coloured tiles light shade with rectified edges 8 to10mm thick, area of each tile exc 0.42 Sqm but not exc. 1.00 Sqm in floors etc, set & jointed in neat cement slurry and pointed in coloured epoxy grout to match laid over and including 15mm thick screed bed or bedding layer of cement mortar (1:4) including demolition of damaged floor of any description and removal of debris out off premises etc complete all as specified and directed

M&L double charged Vitrified ceramic coloured tiles light shade with rectified edges 8 to 10mm thick, area of each tile exc 0.42sqm but not exc. 1.00 Sqm, on vertical surfaces in skirting etc (to match flooring tiles), set and jointed in neat cement slurry and pointed in coloured epoxy grout to match tiles over and including 10mm thick backing coat in cement mortar (1:3), surfaces finished even and rough to receive tiles, including dismantling existing tiles of any type and pattern including cement mortar backing coat and removal of rubbish out off the premises, etc complete all as specified and directed.

M&L GI water tubing surface/concealed, 15mm bore, medium grade galvanized with all fittings (such as tee, elbow, socket, union, short pieces) and application of bituminous paint on concealed portion of tubing, fixed to wall or ceiling or laid in floor, including taking down existing unserviceable GI tubing and connections etc complete all as specified and directed. (Note : Cutting chases and making good shall be measured and paid separately)

M&L GI water tubing surface/concealed, 20mm bore, medium grade galvanized with all fittings (such as tee, elbow, socket, union, short pieces) and application of bituminous paint on concealed portion of tubing, fixed to wall or ceiling or laid in floor, including taking down existing unserviceable GI tubing and connections etc complete all as specified and directed. (Note : Cutting chases and making good shall be measured and paid separately)

M&L for cutting chases not exceeding 10cm in width/girth for concealed water tubing or concealed conduit wiring etc and refilled chases with cement concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate and finally making good in cement mortar 1:3 to match existing surface etc complete all as specified and directed.

Material and labour for water proofing treatment to sunken slab, walls, etc, and shall be carried out as specified below and as directed. (a) Clean the sunken portion of toilet / Baths/ WCs/ Kitchen thoroughly to remove laitance, dirt, dust etc. (b) Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor using polymer modified mortar (“ Dr fixit” Pidicrete URP” or eqvt). (c) Sanitary pipes entering through walls and floor shall be sealed with “Dr Fixit Bath seal Tape” and the gaps to be grouted with non-shrink cementitous grout “Dr Fixit Bath seal Grout” or eqvt. Nahani traps etc to be fitted securely and the gaps around it to be grounted in the same manner. (d) Apply one coat of a Bitumen-modified polymer coating “Dr Fixit Bath seal Plus” or eqvt on all angle fillets by brush and cover it with 100mm open woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely. (e) In the remaining area, in dry substrate condition brush apply first coat of the same coating and further apply second coat when first is dry. Extend the coating upto 150mm above the FFL. Above FFL, another cementitious waterproofing waterproof coating “Dr Fixit Pidifin 2 K” or eqvt can be further applied right upto 2.1 m to waterproof the shower area also, if it is a bathroom or bath cubicles of a sanitary annex and apply second coat after 6-8 hours and allow to dry completely. (f) After 2 to 3 days, sunken portion must be overlaid with a 50 mm thick concrete screed 1:3:6 type B0 mixed with integral WPC (Liquid) laid to slope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 1:5:10 type E2. (g) After completing plumbing work in the toilet/WC/Bath/Kitchen floor, tiling work (floor and dado) can be carried out using suitable Tile Adhesives and ready to make tile grouts of approved makes such as Dr Fixit, FOSROC, SIKA etc.

S&F in repair vitreous china wash down water closet pan (Orissa patern) white with integral foot rest of of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe), including connection to trap, and to flushing pipe, anty syphonage pipe etc. and including 'P' and 'S' trap complete incl making good to floor complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan and trap, (pedestal pattern) including fixing bolts and connecting to drain pipe, including white seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, anti symphonic pipe etc complete all as specified and directed and including 'P' and 'S' trap complete incl making good to floor complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan and trap with flshing cistern, (pedestal pattern in one peice) including fixing bolts and connecting to drain pipe, including white seat cover plastic flat bottom and MS Chromium plated hinging device and connection to flush pipe, anti symphonic pipe etc complete all as specified and directed and including 'P' and 'S' trap complete incl making good to floor complete all as specified and directed.

S&F in repair vitreous china wash hand basin white of bowl size 550x400mm including pedestial leg, waste coupling and waste pipe PVC 32mm dia to be fixed over mild steel bracket complete all as specified and directed.

S&F in repair vitreous china wash hand basin white colour ,ceramic over counter, oval shape size 45x45x20 cm complete including coupling etc. complete all as specified and directed

Demolition of Stone slabs of any description or thickness in floors, aprons etc. Complete all as specified and directed

M&L for 16-18 mm thick Granite ( table rubbed and polished) of any type work on cooking platform and like in cement mortar(1:4) including cutting to required shape, pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite.

S&F in repair pillar tap, cast copper alloy, chromium plated, fancy type Swan Neck with capstan heads screwed down high pressure with or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia etc. complete all as specified and directed

S&F in repair Basin Mixer tap cast copper alloy chromium plated with capstan heads screwed down high pressure or without lettered hot or cold with long screwed, shanked and fly nuts screwed for iron pipe 15mm dia etc. complete all as specified and directed

S&F in repair for stainless steel Tubular towel rail of chromium plated, 20mm dia, D type, 60cm long between flanges, etc. complete all as specified and directed

S&F in repairs low level 10 ltrs capacity PVC valveless symphonic action type flusing cistern low level white with inlet ball valve float ovel handle including 32mm dia PVC flushing pipe etc. complete all as specified and directed

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair bib taps, fancy type, chromium plated, cast copper aloy ISI marked with crutch or butter fly handle high pressure screwed down for iron pipe of 15mm bore etc. complete all as specified and directed

S&F in repairs angle valve, cast copper alloy, chromium plated screwed down fancy type high pressure screwd both ends for iron pipe of 15mm bore etc. complete all as specified and directed

S&F in repairs concealed type angle valve, cast copper alloy, chromium plated screwed down fancy type high pressure screwd both ends for iron pipe of 15mm bore etc. complete all as specified and directed

M&L Brass Chromium Plated shower rose with arms fancy type with swivel joints 75 mm face dia of appoved make and cat part for 15mm bore iron pipes fixed in repairs etc complete all as specified and directed.

S&F in repair grating square 100 mm size of stain less steel etc. complete all as specified and directed

M&L in repair 75mm PVC Bends (any radius), with ovel acess door diminishing pieces or tapers (larger bore measured) etc. complete all as specified and directed

M&L in repair 75mm PVC Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches etc complete all as specified and directed.

S&F in repair 75 mm dia PVC, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall etc complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed.

M&L 16-18mm thick machine cut kota stone slab flooring of size not less than 550x550mm set and jointed in neat cement slurry and pointed in coloured epoxy grout to match laid over and including 20mm thick screed bed in CM 1:4 (surface finished even and rough to receive kota stone) including rubbing and polishing including roughening surfaces of existing concrete floor by picking, sweeping clean & washing down with water to remove dust and apply neat cement slurry @ 3.00kg of cement per sqm, etc complete all as specified and directed.

M&L for Machine cut kota stone slab16-18 mm thick, (table rubbed) (moulded exposed edge), in riser and steps, skirting, dado , over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding the edges half round and rubbing and polishing including rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed

S&F in repair Vitreous china urinal half stall complete incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass secrews, pointing around urinal in back in cement; fixing automatic cistern with brackts, flush pipe, grating and union for discharge pipe etc complete all as specified and as directed

S&F in repair Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete incl providing and fixing plugs, beddding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screw, pointing around urinal back in cement; including floor trap etc complete all as specified and as directed

M&L for Urinal spreader of PTMT chromium plated including pvc connection for fixing with 15 mm dia pipe etc complete all as specified and as directed

M&L Marble work 16 to 18mm thick(table rubbed and polished) reqired shape in Urinal partitions slabs terminating about 40cm above floor line and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types (a) Makrana white etc complete all as specified and as directed

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and as directed

S & F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc with Powder Coating (minimum thickness of powder coating 50 micron & min weight not less than 0.55 kg/Rm) etc, complete all as specified and as directed

S & F for Powder coated Anodised aluminium door shutters, aluminium section weighing not less than 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. inluding powder coating of any colour (Thickness or powder coating not less than 50 micron) complete all as specified

S&F in repair Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, etc complete all as specified and as directed

S&F solid PVC Wall lining consisting of 5mm thick printed colour PVC sheet inclusive of solvent cement and fixing at site on pvc frame as per specifications and drawings including Taking down of old PVC wall lining, preparation of surface etc complete all as specified and as directed

S&F 5 mm thick PVC sheet fillets of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing inluding Taking down of old PVC sheet fillets etc complete all as specified and as directed

Providing & fixing 12mm thick semi perforated micro tegular edged GRG false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles ofSize 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS8225:1987, Noncombustible as per BS4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 tmm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge, including Dismentling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness at any height, including cover fillets complete all as specified and as directed. Make- Diamond or equivalent approved by GE.

M&L RCC 1:2:4 type- B1using 20mm graded crushed stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings platform etc including necessary formwork,all as specified and directed.

M&L Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. complete all as specified and directed

S&F Rotational moulded polyethylene water storage tanks two layer of capacity 1000 litre, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm ball valve high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball etc complete including taking out existing water tanks of any description etc, complete all as specified and as directed

S&F in repair 20/25mm ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed etc, complete all as specified and as directed

M&L rendering 10mm thick on concrete in CM 1:3 in facia or edging of chajjas,ceiling and roof projection etc incl taking out pealed off plaster/concrete and making good to cracked RCC surface in true line /shape by providing Cement Concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregate including all necessary form work to thickness at required at GF and FF finish even and smooth without using extra cement complete all as specified and as directed by eng-in charge.NOTE- the rate will be inclusive of scafolding for single or double storey including making hole in brick work and making good in cement mortar.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc. 0.50 Sqm in each pane including Hacking out old brocken glass etc, complete all as specified and as directed

S&F in repair for Sheet glass shelf assembly consisting of 5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 50cm long etc, complete all as specified and as directed

S&F for Corner glass shelf assembly consisting of 5mm thick sheet glass shelf 30cm wide with chromium plated bracket guard and railing.make jaguar etc, complete all as specified and as directed

S&Fin repairs soap dish dish type of milld steel Chromium plated and wooden/plastic cleats , complete all as specified and as directed.

S&F in repair CP toilet paper holder, superior quality etc, complete all as specified and as directed

Cleaning of septic tanks/soakage well of any size,capacity & depth by Mechanically using sewage tankers/ Truck mounted hydraulic jet pressure machine with flushing the sewage line with heavy duty sewage pumps sewage suction pump,by desluding,dewatering,taking out of all materials such as sludge/ soil waste/polythene /mud/silt/liquid/semi liquid /semi solid/solid or any unwanted items etc,including flushing with adequate water to make the fully functional,re-fixing opened access cover and removing all retrieved material outside the periphery of defence land. Note :- The measurement for the quantity of sludge removed will be arrived by multiplying the inner dimensions of septic tank to actual depth of sludge deposited by dipping the measuring rod. The depth shall be of that wet surface sludge on measuring rod for payment purpose.

S&F UPVC underground drawings pipe (UDS) type 'B' 150mm dia with wall thickness 4mm (min) and pressured 4 KN /Mtr Sq jointed in cement solvent complete including providing cement concrete (1:4:8) type D-2 using 40mm grade stone agg as in bed for 150mm bore pipes incl packing under and huaunching against the sides of pipes after they are laid tested including Taking down old damaged SGSW pipes from existing lines including necessary excavation of old fitted in trenches and fixed to existing manhole and making good etc, complete all as specified and as directed

S&F in repair 100mm Hasp and staple, safety type, stainless steel including bolt to hinge plate and fixed with screws etc, complete all as specified and as directed

S & F in repair Magnetic door catches with sticking plate of standard size for cupboard doors approved by GE etc, complete all as specified and as directed

S&F 125mm size, extruded stainless handles, fabricated type, anodised etc, complete all as specified and as directed

S&F In repair for Flushing jet spray/health faucet for pedestal pattern W.C including flexible pipe and brass Chromium plated nuts etc, complete all as specified and as directed

S&F blinds in window portion including all fittings etc, complete all as specified and as directed

Material & Labour for applying two or more coats of 100% premium W.C acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance dirt resitstance exterior paint of required shade (Company Depot Tined) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surfaces complete all as specified and as directed Note: (a) Exterior acrylic emulation paint shall be anti-fungal, dust resist, water repellent, crack-bridging, weather proof type 1st Quality.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M & L Repair/Replacement for modular point wiring with 1.5 sqmm (nominal area) PVC insulated FRLS and unsheathed multistranded copper conductor cable 1100 volts grade drawn through and including PVC rigid concealed conduit not less than 1.5 mm thick (ISI marked) with all accessories including suitable modular plate (Inner + Outer) and modular metalic boxes of suitable sizes including 1.5 sqmm PVC FRLS insulated unsheathed copper conductor multistranded cable for continuous earth conductor connected to common earth dolly, complete all as specified & directed for the following :- Note:- Proper colour coding is to be followed as per IS Specification.

One light controlled by one switch 5 Amp, SP, one way 240 volts.

One Ceiling/Exhaust fan point controlled by one switch SP, one way, 5 Amp, 240 Volts .

One bell/buzzer point controlled by one bell push.

All as per item No. 103.00 here-in-before but for one light point controlled by two switch 6 Amp SP, two way, 240 Volts.

All as per item No. 103.00 here-in-before but for one 5 pin 6 Amp socket outlet point on same board controlled by one way switch SP, one way 6 Amp, 240 Volts

All as per item No. 103.00 here-in-before but for one 5 pin 6 Amp socket outlet point on independent board controlled by one way switch SP, one way 6 Amp, 240 Volts

All as per item No 103.00 here-in-before but using 4 Sqmm (nominal area) multistranded copper conductor cable including 4 Sqmm size FRLSH PVC insulated and sheathed copper conductor cable as earth conductor (green colour) connected to common earth dolly for one 6 pin socket outlet 16 Amps multi purpose on independent point and for geyser complete all as specified and directed.

M&L in replacement of Sub main wiring in two single run FRLS PVC insulated cable 6 Sqmm (Nominal dia) copper conductor (multistrand) and drawing in and including new PVC concealed non metallic conduit pipe ISI marked including one run 6 Sqmm multistranded copper conductor FRLS PVC green colour insulated unsheathed cable for earth continuity complete all as spd and directed.

M&L in replacement of Sub main wiring in two single run FRLS PVC insulated cable 10 Sqmm (Nominal dia) copper conductor (multistrand) and drawing in and including new PVC concealed non metallic conduit pipe ISI marked including one run 10 Sqmm multistranded copper conductor FRLS PVC green colour insulated unsheathed cable for earth continuity complete all as spd and directed.

M&L for Modular switch piano (soft touch) flush button SP, 1 way 5/6 amps 240 volts with polycarbonate body.

M&L for Modular switch piano flush button (soft touch) SP, two way 5/6 amps 240 volts with polycarbonate body.

M&L for Modular switch piano flush button (soft touch) single pole one way 15/16 amps 240 Volts with polycarbonate body.

M&L for Modular socket out let, 6 pin 5/6 and 15/16 amps multi purpose 2 in 1 flush type, 240 volts with polycarbonate body.

M&L for Modular socket 2 in 1 ,6 amps 2/3 pin Combined 2 Modular , 240 volts. with polycarbonate body.

M&L of Modular bell push flush button(soft touch) ,SP one way 5 amps 240 volts with polycarbonate body.

S&F in replacement of Bell Ding Dong, AC 230 volt, Single Pole complete all as spd & directed

S & F in replacement of lamp holder batten type polycarbonate body with back plate for batten fitting, fixing with proper round block all as directed.

Supply and fixing in replacement of LED Lamp 9/10 watt B-22 holder base with polycarbonate body and aluminium heat sink warm white complete all as specified and as directed

M&L In Replacement of ceiling rose surface bakelite 2 to 3 terminals with polycarbonate body.

Supply and fixing in replacment of LED lights fitting 1x 20W,minimum 3.5/4 feet 220V, AC decorative box type with driver, holder including LED tube light connecting up with flexible copper conductor cable of suitable size from ceiling rose etc, complete all as specified and as directed

S & F LED light fitting 1x9W/ or 1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size etc, complete all as specified and as directed

Supply and fixing in replacement of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size etc, complete all as specified and as directed

Supply and fixing of 5 star rated BLDC ( Brush less direct current motor ) ceiling fan 230 volts, single phase of 1200 mm Sweep with regulator for speed control, remote & connected accessories, double ball bearing type with minimum air delivery 210 CFM & service value shall not less than 6.0 B.E.E including blade, down rod and canopy cover white colour etc and including connecting 3 core flexible copper contuctor cable, including dismantling of old unsv ceiling fans and depositing to KV School store Incharge etc, complete all as specified and as directed

Supply and fix exhaust fan of sturdy Engineering plastic body AC single Phase. 230V, 50 Hz, RPM 1200, Copper winding of size 300 mm sweep with, blades, and frame and louvers, including dismantling of old unsv exhaust fans and depositing to KV School store Incharge etc, complete all as specified and as directed

Taking down electric energy meter single phase any size or type form the existing site and refixing the same at same place after carrying out necessary repair work and making the surface good to match with existing surface etc, complete all as specified and as directed

S & F High performance IP66 LED Streetlight 35 watt, housing made of die-cast aluminium, with street optic lens,with all accessories and connecting up with and including provision of 3 core flexible copper wire of size 1.5 sqmm from ceiling rose, and 35W LED light etc. drawn through and including 32mm bore GI light grade protecion pipe upto 1.5 m length with suitable fixing accessories on walls etc, complete all as specified and as directed

S & F SPN 4 way sheet metal enclosures factory made DB double door 230 V AC, 50 Hz AC 200 Amp rated bus bar etc, complete all as specified and as directed

S & F SPN 8 way sheet metal enclosures factory made DB double door 230 V AC, 50 Hz AC 200 Amp rated bus bar etc, complete all as specified and as directed

S&F in repair 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning etc, complete all as specified and as directed

S&F in repair 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 AMP, in the MCB DB Complete with connection testing and commissioning etc, complete all as specified and as directed

S&F in repair 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning etc, complete all as specified and as directed

S&F in repair MCCB TP 100 Amp 415V 16KA fixed type suitable for VTPN DB complete with connection testing and commissioning etc, complete all as specified and as directed

S & F in repair VTPN DBs Double Door 4 way suitable for MCCB incomer, IP 43 protection 415 V AC, 50 Hz AC appropriate size of bus bar and neutral link complete all as specified and directed

M&L for earthing complete with galvanized steel earth plate electrode 60cmX60cm X6mm thick buried directly in ground (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth lead wire of 4.0mm dia by means of nuts bolts, washers, check nuts of iron or steel including PCC pits and RCC cover in PCC 1:2:4 (type B-1) and necessary earth work in any type of soil medium grade GI watering pipe 20 mm dia with funnel and wire mesh and 15mm bore GI pipe light grade protection pipe upto test point etc including excavation and charcoal, common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I. all specified.

Supply & fix decorative path way light lighting LED decorative post top lantern for 360 degree 40 watts 230 volts, 50 HZ, maple shaped in sothing opal/ prismatic finish made up of polycarbonate,including all accessories prewired complete.Note :- (i) Minimum 2 years gaurntee period of LED fittings (ii) Driver shall be IP 66 degree of protection potted seal type. (iii) Power factor more than 0.9

S&F GI tubing medium grade Galvanized of size 20 mm bore laid in trenches or ground/ in wall surfaces with and including all fitting etc, complete all as specified and as directed

S&F GI tubing medium grade Galvanized of size 40 mm bore laid in trenches or ground/ in wall surfaces with and including all fitting etc, complete all as specified and as directed

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1,5 mtrs in depth for laying of cables/ pipes including getting out in any type of soil etc, complete all as specified and as directed

Returning filling in including spreading, leveling ,and well ramming, in layers not exceeding 25 cm each layer of any kind of soil.

Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point.

M&L for cutting existing GI/CI any size of pipe line making new connection for GI pipe including short pieces , inserting tees, bends ,sockets, union etc with existing water line all as specified by Engr-in-charges.

S&F stop valve 20 mm dia cast copper alloy screwed on high pressure with crutch or butterfly handle screwed bolts ends, for iron pipe or for union and fixed complete.

S&F for 1100 volt grade XLPE insulated heavy duty cable, 70 sqmm 3.5 core, strip armoured with aluminium stranded conductor overall PVC sheathed laid in trenches etc complete all as specified and directed. Note : Excavation & Earthwork shall be measured and paid separately.

S&F for 1100 volt grade XLPE insulated heavy duty cable, 35 sqmm 3.5 core, strip armoured with aluminium stranded conductor overall PVC sheathed laid in trenches etc complete all as specified and directed. Note : Excavation & Earthwork shall be measured and paid separately.

M & L for good quality dry sand cushioning to under ground electric cable on layer of 8 cm thick before laying the cable and second layer of 15 cm thick after laying the cable etc complete all as specified and directed.

Supply and laying brick well burnt locally available sub class "B" size 230x115x75mm laid over sand cushioning to cable in trenches keeping width of brick parallel to the length of cable etc complete all as specified and directed.

Material and labour for replacement of GI tubing light grade 50 mm bore for passing through cables under the floor, along the wall or along the pole complete all as specified and directed .

Taking down of AC and Geysers any size or capacity from the existing site and re-fixing the same at the same place after necessary B/R repair including making good the surface matching with existing surface.

Notes : The Schedule of Credit amount shall be deducted from the total of this schedule(BoQ) to arrive at Contract Sum.

yash paul gupta (BID ID -3482414)