REPAIR MAINT OF SECURITY LIGHTS LED DISPLAY GLOW SIGN BOARD AND CONNECTED WORKS AT TANDA AREA UNDER GE NORTH AKHNOOR

Amount

Taking down unserveciable/damaged street lights of any type from pole and set aside for repair and reconnecting the same after replacing the following burnt parts all as specified and directed:-

Supply only electronic driver suitable for LED fittings 60 watts any type all as specified and directed by Engineer in Charge. Make of driver as per sample

Supply only electronic driver suitable for LED fittings 45 watts all as specified and directed by Engineer in Charge. Make of driver as per sample

Supply only electronic driver suitable for LED fittings 24watts all as specified and directed by Engineer in Charge. Make of driver as per sample

Supply and fixing in replacement “Lithium based Energy Efficient Integrated Solar Street Light of 16 Watt” in Single FRP body with duly Polyurethane coating (Camouflage color) , encases with Monocrystalline Solar PV Panel of 30/35Wp , Lithium Battery 11.1/12.8V, 19.8AH with inbuilt BMS, IP 65, High brightness W-LED(160-180lm/watt) lamp with Aluminum reflector for better light distribution , CRI >70, Color Temperature 5700K - 6500K, Microcontroller based charge controller cum driver, automatic dimming function (first four hours at full brightness & rest of the time at lower light level with PIR Motion Sensor), Dusk to Dawn Operation, suitable to working temperature: (-) 10°C to (+)55°C, weight not more than 8-10kg with adjustable MS clamp suitable for pole/wall mounting etc complete as required. Protections: Short Circuit, overload, Reverse polarity and battery protections. Firm should provide Vital Parameters Test report from NABL accredited lab and should be of made in India with CE & ROHS compliant.

Supply and fixing in replacement “Lithium based Energy Efficient Integrated Solar Street Light of 20 Watt” in Single FRP body with duly Polyurethane coating (Camouflage color) , encases with Monocrystalline Solar PV Panel of 44/46Wp , Lithium Battery 11.1/12.8V, 24.2AH with inbuilt BMS, IP 65, High brightness W-LED(160-180lm/watt) lamp with Aluminum reflector for better light distribution , CRI >70, Color Temperature 5700K - 6500K, Microcontroller based charge controller cum driver, automatic dimming function ( first four hours at full brightness & rest of the time at lower lightl evel with PIR Motion Sensor), Dusk to Dawn Operation, suitable to working temperature: (-) 10°C to (+)55°C, weight not more than 10-12kg with adjustable MS clamp suitable for pole/wall mounting etc complete as required. Protections: Short Circuit, overload, Reverse polarity and battery protections. Firm should provide Vital Parameters Test report from NABL accredited lab.

Supply and fixing in replacement “Lithium based Energy Efficient Integrated Solar Street Light of 24 Watt” in Single FRP body with duly Polyurethane coating (Camouflage color) , encases with Monocrystalline Solar PV Panel of 53/55Wp , Lithium Battery 11.1/12.8V, 28.6AH with inbuilt BMS, IP 65, High brightness W-LED(160-180lm/watt) lamp with Aluminum reflector for better light distribution , CRI >70, Color Temperature 5700K - 6500K, Microcontroller based charge controller cum driver, automatic dimming function ( first four hours at full brightness & rest of the time at lower light level with PIR Motion Sensor), Dusk to Dawn Operation, suitable to working temperature: (-) 10°C to (+)55°C, weight not more than 12-14kg with adjustable MS clamp suitable for pole/wall mounting etc complete as required. Protections: Short Circuit, overload, Reverse polarity and battery protections. Firm should provide Vital Parameters Test report from NABL accredited lab and should be of Made in India with CE & ROHS compliant.

Taking down old unserviceable HPSV street lights and M&L for LED street light fitting of capacity 45 watt with LED bulb having high pressure die cast aluminium housing with sealed toughened glass cover suitable for pole mounting, light source SMD LED array with lens of efficiency >120lm/W, operating voltage range 120volt-280 volt, operating temperature : 20°C to 55°C, power factor >0.95, weather protection IP66, Class I electrical safety including suitable size copper cable three core for connection all as specified and directed. Make C&S Cat part No LTESS18x2.5HPLED/LS or equivalent in make of Havells/Bajaj/Surya.

Taking down old unserviceable 85 watt CFL type street lights and M&L for LED street light fitting of capacity 60 watt with LED bulb having high pressure die cast aluminium housing with sealed toughened glass cover suitable for pole mounting, light source SMD LED array with lens of efficiency >120lm/W, operating voltage range 120volt -280 volt, operating temperature : 20°C to 55°C, power factor >0.95, weather protection IP66, Class I electrical safety including suitable size copper cable three core for connection all as specified and directed. Make C&S Cat part No LTESS24x2.5HPLED/LS or equivalent in make of Havells/Bajaj/Surya.

Taking down old unserviceable flood lights and M&L for LED flood light ORION C Series capacity 50 watt IP66 high power with pressure die cast aluminium housing complete with all accessories Make C&S cat part No LTEFC50WHPLED/WW or equivalent in make of Havells/Bajaj/Surya

Taking down old unserviceable flood lights from high mast light of any type and M&L for LED flood light ORION Series capacity 75 watt IP66 high power with pressure die cast aluminium housing complete with all accessories Make C&S cat part NoLTEFI75WHPLED or equivalent in make of Havells/Bajaj/Surya.

Supply and fixing street light bracket for street light fittings made to shape as directed out of G.I. pipe light grade 32mm bore 1.5 mr long including fixing of light fittings and bracket with MS clamps, nuts and bolts of appropriate size including painting complete all as specified and directed.

M&L for multistranded copper cable size 2.5 sqmm x 2 core required for street light connection including taking down existing old unserviceable cable complete all as specified and directed.

Painting of poles by scrapping out with emery paper cleaning and repainting the same with aluminium paint with black and yellow paint marking complete upto height of 1.5m of span of 30cm all as specified and directed.

Supply , installation in replacement, connecting electrically and testing of street light junction box size 450x250x300mm, pole mounted made out of CRCA sheet 2 mm thick , powder coated having door with magnetic lock complete with bus bar 4 Nos suitable for 3 phase 4 wire supply system, made of aluminium strip of size 20X3mm, one single pole 240 volts 'C' Curve type 6 Amps with rupturing cap 10 KA, including fixing arrangement made of MS Clamps of requisite size nuts, bolts and washers complete, all as specified and directed by Engineer in Charge. Make DVEPL, Electrifield, Siemen.

Supply, fabrication and fixing in replacement feeder pillar box of size 500x 450x500 mm made out of MS sheet of 2.0mm thick bent to shape & size factory made with welding, bending works suitable for and including 200 Amps rated aluminium bus bars (length of bus bar not less than 40 cm) 4no's ,making holes of any size and mounted on porcelain/epoxy based post insulators of appropriate size with suitable size of nuts, bolts and washers complete with mounting leg of size 40x40x5 mm and length of angle iron not less than 1 mtr, 0.5 mtr to be embeded in PCC below G.L and 0.5 mtr above ground including painting of complete structure with two coats of super enamelled synthetic paint over a coat of red oxide and incoming/out going cable connections with required size of cable lugs with proper crimping. Make :- Make DVEPL, Electrifield, Siemen.

Taking down old unserviceable cable of any size and Supply and fixing Aerial bunched cable (AB) LT of size 50 Sqmm x 3core + 35 Sqmm x 1core with three power cores stranded compacted circular aluminium conductor screened with black extruded semiconducting compound, natural coloured XLPE insulated core screened with black extruded semi conducting compound and one layer of copper tape and covered with black extruded PVC( core identification by colour tape marking red, yellow and blue with colour tape placed longitudinally under the copper tape) and one bare messenger wire shall be stranded non compacted circular aluminium alloy conductor all as specified and directed. Note:- The following hardware fittings and accessories shall be used to install,erect and join the AB cable (i) Suspension clamp with eye hook (ii) Suspension fittings and corresponding eye hook (iii) Dead eye fittings (iv) Nylon Tie (v) Connectors

M/S SAHNI CONSTRUCTION CO

M/S A K ENGINEERS & CO.

Usha Engineering Co.

M/S GRD ENGINEERS

CHOPRA CONSTRUCTIONS

Jiwan Singh

M/s R V Enterprises