SPECIAL REPAIRS OF APPROACH ROAD AC DEPOT GATE NO 1 TO GARRAGE, TAJ BAGH TO RATION STORE, GATE NO 2 TO GARRAGE AT NEW KLP AC DEPOT IN AOR AGE B/R-II UNDER GE (N) AHMEDNAGAR

Amount

Repairs to pot holes any depth, not exceeding 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc. cutting around edges to at least 25 mm in depth, making good by filling in screened and graded road metal watering and well ramming (incl supply of metal) and making good by applying tack coat @ 5 kg per 10 Sqm of paving bitumen,VG-10 putting in premixe as specifide for thin bituminous carpet (2 cm thick), well rammed and sealed with seal coat (6.8 kg of binder with 0.06 cum of sand) and again well rammed (including supply of premixed binder and sand), depth of pot holes not exceeding 30mm complete all as specified & directed.

M &L preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally cleaning the surfaces with mechanical compressor to remove all loose dirt etc and applying evenly priming / tack coat with bituminous primer (paving VG - 10 grade bitumen) @ 2.50 Kg per 10 Sqm complete all as specified & directed.

M&L Premix bituminous macadam (Using paving bitumen VG-30) laid and rolled and compected to required gradient and camber with 8 to 10 MT power roller (consolidated thickness 75mm or less) using 4% binder content by weight of total mix

M& L for premixed bituminous semi-dense asphaltic concrete 30 mm consolidated thickeness with max 5.% binder content, paving butimen VG - 30 grade by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all specified & directed.

M&L for preparation of road surface and applying thermoplastic reflective paint for making of minium 2.0 mm thick single coat as a centre line or edge line etc, road marking n exc 100 mm width using thermoplastic paint (Hot application) white/ yellow by indigenous modern propelled road marking machine as directed including all ingredients such as binder, glass beads, titanium dioxide, calcium carbonate, internal fillers etc, thermoplastic requirement for glass beads shall be confirming to BS-6086 of most specification including spraying of glass beads etc complete all as per manufacturers instructions and complete as all specified and directed.

Sameer S Shaikh

sardar construction

HG PATHAN CONSTRUCTION COMPANY