Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.4 LAccepted-Finance | L1 | Accepted-Finance Being L1 | |
| 2 | L2₹45.7 L+₹3.3 L (7.76%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹55.0 L+₹12.6 L (29.8%)Rejected-Finance 6146 HIRA CHOWK SIRKI BAZAR BATHINDA PB 151005 | BATHINDA | PUNJAB | 151005 | L3 | Rejected-Finance Being L3 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
15 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (W) HISAR
GE (W) HISAR HISAR MIL STN HISAR 125006
GE(W)/HSR-42/2022-23 REPAIR TO JOINERY OF OTM MD JCOS/OR ACCN AND MES COLONY DAY TO DAY) OF ZONE A AT HISAR MIL STN UNDER GE (W) HISAR
2022_MES_555137_1
GE(W)/HSR-42/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (W) HISAR
As per tender documents
8 documents required · 8 mandatory
₹500
GE (W) HISAR
₹98,000
Yes
31 Dec 2022
29 Sept 2022
17 Nov 2022
29 Sept 2022
15 Nov 2022
14 Oct 2022
Amount
Taking down chowkat or frame with shutters area n.exe 1.5 sqm each (Without taking off the shutters from the frame) incl cutting holes For hold fast & making good complete all as specified and directed.
Taking down chowkat or frame with shutters area exe 1.5 sqm but not exe 4 sqm each (without taking off the shutters from the frame) incl cutting holes for hold fast and making good complete all as specified and directed.
Taking down shutters of any description exe 1 sqm and n.exe 2 sqm each and removal from site etc complete all as specified and directed.
Easing of wooden doors/window/ventilator shutter any thickness, any size by planning with plane jack, by tightening of hinge screw, by adjusting/tightening tower bolts, sliding bolts etc and making it fully functional complete all as specified and directed.
S&F pressed steel Pre-painted frames of size 125x60mm for doors with one or more rebates incl necessary fixing lugs , hinges, lock strike plate etc complete all as specified and directed.
S&F pressed steel Pre-painted frames of size 105x60mm for doors with one or more rebates incl necessary fixing lugs , hinges, lock strike plate etc complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (using 20mm Graded Stone Aggregate) as in filling of Chowkhats and complete all as specified and directed.
Taking down cupboard Shutters /Partition /Shelves of any description exc q Sqm but N.exc 2 Sqm Eachc omplete all as specified and directed.
S&F for 1mm thick factory made pressed steel shutter fixed with 1.25mm thick pressed steel frame of 105 x 60mm and as reqd for cupboards (consisting two shutters) including 06 Nos hinges of size 100mm long and Godrej pattern three way locking system with suitable shape & size 12mm dia MS rod & 01 Nos chromium plated handle of size 150mm long with & including two coats of shop spray synthetic enamel painting over a coat of red oxide primer as colour approved by GE. Note : Cupboards frame to be fixed with 06 Nos nuts & bolts of dia 12mm & 150mm long at vertical outer edge of cupboards brick wall / concrete surface including making good the distrubed surfaces complete all as specified and directed.
M&L Prelaminated PVC solid Board ,18/19 mm thick ,Prelaminated on one side with decorative choice lamination & other side balancing white lamination , including pasting wit solvent chemical as required at site or fixed with screws complete as in shelves / partition incl fixing arrangement on walls complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F,MS framed work such as grill grating, framed Guard bars, barred iron doors,ladders, frame work for securing water tank,cooler stand and similar work conformed to Fe-410 or 310-0 complete all as specified and directed.
S&F , 30 mm thick factory made solid PVC Moulded Door Shutter with Wood Free EPS, with 2,4 or 6 raised panel design with 2mm thick moulded Prelam PVC sheet on front & back face and complete all as specified and directed.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm thick Prelam PVC sheet reinforced with MS square tube fixed in opening as per specifications and making good the plaster of wall in CM 1:6 complete all as specified and directed.
Providing & fixing double rebate ventilators fabricated from roll framed sections made of galvanised steel color coated / powder coated (base steel as per IS 513 "D" quality galvanised as per IS 277 with Zinc of 120 gms /Sqm )with total coated thickness of 0.60 mm. Paint Specification : coated section should be with primer coat of epoxy primer of 5-7 micron thick , finish painted with polyester paint of 12-16 micron thick or powder coated with pure polyester up to 50 -60 micron thick. Dimension of Sections:sections for frame should be of 72 x 55 mm , section for mullions should be of 72 mm x 50 mm ,section for shutter frame should be of 47mm x 20 mm ,section for fixed glass bead should be of 12mm x 12 mm ,and section for fly mesh should be of 40 mm x 20 mm Fixing Details: section for frame glazed shutter and wire mesh shutter should be cut to length and miter jointed with poly propylene corner brackets , mullion section should be joined with frame / mullion using mullion cap Ethyl Propylene Damien Monomer (EPDM) Gasket should be used all around glass in shutter and fixed glass spoon Profile should be used around Fly mesh to fix mesh in mesh shutter. Accesories:- Each Glazed shutter and mesh shutter should be provided with SS Pivot Hinges -1 set ,seccolor Handles &seccolor Stay Window Frame Should be Fixed to Brick/ Concrete masonary by using Nylon self Expanding Caps and driving MS electroplated 80 mm long screws into the caps through frame the above said rates are also inclusive of 5mm thick plain float glass &SS wire mesh. complete all as specified and directed.
Providing & fixing double rebate openable windows fabricated from roll framed sections made of galvanised steel color coated / powder coated (base steel as per IS 513 "D" quality galvanised as per IS 277 wit Zinc of 120 gms /Sqm )with total coated thickness of 0.60 mm. Paint Specification : coated section should be with primer coat of epoxy primer of 5-7 micron thick , finish painted with polyester paint of 12-16 micron thick or powder coated with pure polyester up to 50 -60 micron thick. Dimension of Sections:sections for frame should be of 72 x 55 mm , section for mullions should be of 72 mm x 50 mm ,section for shutter frame should be of 47mm x 20 mm ,section for fixed glass bead should be of 12mm x 12 mm ,and section for fly mesh should be of 40 mm x 20 mm Fixing Details: section for frame glazed shutter and wire mesh shutter should be cut to length and miter jointed with poly propylene corner brackets , mullion section shoulb be joined with frame / mullion using mullion cap Ethyl Propylene Danien Monomer (EPDM) Gasket should be used all around glass in shutter and fixed glass spoon Profile should be used around Fly mesh to fix mesh in mesh shutter. Accesories:- Each Glazed shutter and mesh shutter should be provided with SS Pivot Hinges -1 set ,sector Handles &seccolor Stay Window Frame Should be Fixed to Brick/ Concrete masonary by using Nylon self Expanding Caps and driving MS electroplated 80 mm long screws into the caps through frame. the above said rates are also inclusive of 5mm thick plain float glass &SS wire mesh. complete all as specified and directed.
Providing & fixing 3Track 2 glass panel &1 Mesh Panel sliding window fabricated from roll framed sections made of galvanised steel color coated / powder coated (base steel as per IS 513 "D" quality galvanised as per IS 277 with Zinc of 120 gms /Sqm )with total coated thickness of 0.58 mm.or powder coated with pure polyester powder up to 50-60 micron thick.sections for 3 Track external frame should be of 44 x 107 mm ,section for window glassshutter&wiree mesh shutter should be of 35mm x 49 mm ,section for shutter horizontal mullion should be 22 mm x 60 mm section for window euro groove should be 25 x 24 mm (alumimium/Plastic) and section for window lap strip should be of 21 x 4 mm (aluminium). the window should be panel with 5 mm thick float glass.gaskets are to be made of Ethyl Propylene Danien Monomer (EPDM). Gasket corner bracket for internal and external frame made of Polyproplene.Touch lock to be provided for window shutter .sections are to be cut to length ,jointed and assembly by means of corner brackets.the above Frame Should be Fixed to Brick/ Concrete masonary by using Nylon self Expanding Caps and driving MS electroplated 80 mm long screws into the caps through frames and complete all as spd and directed the above said rates are also inclusive of 5mm thick plain float glass &SS wire mesh. complete all as specified and directed.
S&F 35mm thick factory made plain framed, paneled shutter made of 2nd class HW (Bonsum/Hollock) of 35 mm thick(two panels)with lock rail and panel of 12 mm veneered particle board with commercial veneering on both faces. The size of rail and styles as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc (with sash bars) edges but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers as specified in SSR Part-I Section 8 Clause 8.24(a), fitted to chowkats complete all as specified and directed.
M&L for preparation of new surfaces of wood or wood based mtrls of any desc over 10cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified and directed.
S&F framed work such as grills, gratings etc with ends of bar shouldered and/or riveted or forged into spikes, framed guard bars etc confirming to Fe-290, Gde -E-165 complete all as specified and directed.
S&F for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in Repairs for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F 100mm aluminium anodised hasp and staple safety type complete all as specified and directed.
S&F 150 mm extruded aluminium alloy handles fabricated type complete all as specified and directed.
S&F aluminium anodised barrel tower bolt of extrued section 200mm long complete all as specified and directed.
S&F 250 mm long aluminium alloy anodized sliding doot bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixining biolts abd sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
S&F in repairs butt hinges 100mm medium weight and fixed with steel frames by means of welding and riveting complete all as specified and directed.
S&F 200mm long Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F in repairs 200mm long Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
M&L for two coats of synthetic enamel paint on steel surfaces of any description over 10cm in width or girth not otherwise described incl prepartion of new surfaces complete all as specified and directed.
Supply and fixing acrylic transparent sheets 3mm thick in square / rectangular area of each pane not exc 0.5 sqm and fixed /lock with window frame by using PVC snap beeding with necessary self tapping reviting / screwing and suitable method with and including Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones as complete all as specified and directed.
Demoliton of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing debries out of MD land as directed.complete all as specified and directed.
M&L Brick work with flyash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed.
Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 10mm thick in cement mortar 1: 6 on faces of brick work or concrete surfaces in patches, finished fair and even complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying two coat of oil bound distemper over and including one coat of 1 mm thick wall care putty complete all as specified and directed.
Dismantling floor hearth or wall tiling incl cement mortar bedding complete all as specified and directed.
S&F non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) tiles of size 400 x 400 mm in floors, over and including 15 mm thick screed in CM (1:4) set and jointed with 3-5 mm tiling Spacer tool in neat cement slurry and pointed flush with white or coloured Epoxy to match and complete all as specified and directed.
M&L for coloured glazed ceramic tiles of size 300 x 600 mm thick as in vertical surface in light and dark color combination set and jointed in neat cement slurry with 3-5 mm tiling Spacer tool and pointed flush with white or coloured Epoxy to match ,over and including 10mm thick baking coat in CM 1:3 complete all as specified and directed.
M&L for coloured non-skid ceramic tiles 7 to 8mm thick (square/rectangular) of size 600mm x 1200 mm in floors etc set & jointed with 3-5 mm tiling Spacer tool in neat cement slurry and flush pointed with white or coloured Epoxy to match, including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
All as per item no 41.00 but in skirting over and including 10mm thick cement plaster 1:4 complete all as specified and directed.
S&F superior quality SS rails (Curtain rod/drapery rod), 20mm dia with and including fency type SS bracket 2 Nos of each opening and SS side stopper fency of required shape and size 2 Nos of each opening complete all as specified and directed.
M&L for preparation of old painted steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted wooden or wood based surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and frame work complete all as specified andf directed.
S&F hollow PVC wall paneling, super strong quality single side prelaminated with flat or fancy patterned on laminated side, incl PVC 'L' and 'U' sections for finishing of corners and ends etc inclusive of fixing with screw or with solvent cement requrired at site on walls complete as specified and directed.
S&F Anodised aluminium snap grid framework of size 605 mm x 605 mm for false ceiling complete all as specified and directed.
M&L Exposed metal frame ceilings with 8 mm thick calcium silicate board of silicious and calcerious material reinforced with cellulose fibre for fixing in 600 x 600 mm grid (frame work for ceiling shall be measured and paid separatey) complete all as specified and directed.
M&L Powder coated Aluminium door Shutters , Aluminium Section weighing 0.55 Kg/Rm incl necessary joining cleats , glazing clps , rubber neoprene , packing , handle 2 Nos in each doors , hinges , anodised aluminium snaps bidding , screws etc complete all as spd and directed
S&F sheet glass 5.5 mm thick ordinary quality in squares exc 0.5 sq m incl 25 micron black film complete all as specified and directed.
M&L Powder coated aluminium window and ventilator shutters , side hung type (thickness or powder coating n less than 50 micron) without sash bars ,aluminium sections 0.55 Kg /m incl necessary joining cleats ,glazing clips ,rubber packing ,aluminium snap beading ,screws aluminium fittings such as peg stays 150 mm long (1 No) , hinges type B-21 100 mm long (2 No )., suitable handle (1 no ) complete all as specified and directed.
M&L Powder coated aluminium window and ventilator shutters , fixed type (thickness or powder coating n less than 50 micron) without sash bars ,aluminium sections 0.55 Kg /m incl necessary joining cleats ,glazing clips ,rubber packing ,aluminium snap beading ,screws complete all as specified and directed.
M&L Powder Coating (minimum thickness of powder coating 50 micron) Aluminium Door,Windows ,ventilators, with one or more rebates incl joining cleat for fixing etc complete all as specified and directed.
S&F Floor door stopper of aluminium alloy body 50 mm long with rubber shoes fixed in repair complete all as specified and directed.
S & F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair complete all as specified and directed.
M/S RAJESH KUMAR & SONS
B B BUILDERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .