Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹10,000
Closing Date
28 Sept 2026, 11:30 am7d left
SOI (Works)
HQ 6 Sector Assam Rifles c/o 99 APO Pin-797115
Renovation and upgradation of security related assets of HQ 6 Sector Assam Rifles at Kashiram Basti, Dimapur
2026_ARMHA_926613_1
I.15032/NIT/Engr/MW/6Sect/ 2026-27/257
Open Tender
Civil Works
Item Rate
90 days
Kashirambasti
Please refer tender documents
2 documents required · 2 mandatory
₹1,000
DIGAR 6 Sector Assam Rifles
₹10,000
17 Sept 2026
17 Sept 2026
29 Sept 2026
17 Sept 2026
28 Sept 2026
18 Sept 2026
18 Sept 2026 - 24 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1REPAIR/MAINT OF TRADESMEN SHOP | |||||
| 1.01 | Earth work by mechinical / manual means in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and for all lift : All kinds of soil | 7.21 | Cum | 100 | ₹721 |
| 1.02 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All workl up to plinth level: 1:4:8 (1 cement : 4 coarse sand (Zone-III) derived form natural sources : 8 garded stone aggregate 40mm nominal size derived from natural sources). | 6.41 | Cum | 100 | ₹641 |
| 1.03 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size de rived from natural sources) | 1.24 | Cum | 10 | ₹12.4 |
| 1.04 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Mild steel and Medium Tensile steel bars | 135.63 | Kgs | 10 | ₹1,356.3 |
| 1.05 | Steel work in built up tubular (round, square or rectangular hollow tubes
etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 325.83 | Kgs | 100 | ₹32,583 |
| 1.06 | Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm) | 12.2 | Mtr | 100 | ₹1,220 |
| 1.07 | Brick work with common burnt clay modular bricks of class designation
7.5 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand). | 6.78 | Cum | 100 | ₹678 |
| 1.08 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks
of class designation 7.5 in foundations and plinth in :cement mortar 1:4 (1 cement : 4 coarse sand) | 83.46 | Sqm | 100 | ₹8,346 |
| 1.09 | 12 mm cement plaster on rough side of single or half brick wall of mix 1:6 (1 cement: 6 coarse sand | 190.41 | Sqm | 100 | ₹19,041 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.21 MB
BOQ_973739.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .