MNKLIS-Office building

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS-20 B as directed by the Engineer-in-charge

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundation and under flooring bed using coarse aggregate 40mm size, hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and Overheads & Contractors profit complete for finished item of work as directed by the Engineer-in-charge.

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and Overheads & Contractors profit complete for fnished item of work as directed by the Engineer-in-charge.

V.R.C.C. M-20- V.R.C.C M20 Grade mix using 20mm graded H.G. metal using necessary Quantity of steel including cost and conveyance of all materials of approved quality and all labour charges such as steel centering charges, machine mixing of concrete and vibrating charges,curing etc., complete but excluding cost of steel and its fabrication charges etc., complete for finished item of work as directed by the Engineer-in-Charge for Footings

V.R.C.C. M-20- V.R.C.C M20 Grade mix using 20mm graded H.G. metal using necessary Quantity of steel including cost and conveyance of all materials of approved quality and all labour charges such as steel centering charges, machine mixing of concrete and vibrating charges,curing etc., complete but excluding cost of steel and its fabrication charges etc.,complete for finished item of work as directed by the Engineer-in-Charge for Column Pedestals.

V.R.C.C. M-20- V.R.C.C M20 Grade mix using 20mm graded H.G. metal using necessary Quantity of steel including cost and conveyance of all materials of approved quality and all labour charges such as steel centering charges, machine mixing of concrete and vibrating charges,curing etc., complete but excluding cost of steel and its fabrication charges etc.,complete for finished item of work as directed by the Engineer-in-Charge for for Plinth Beams.

V.R.C.C. M-20- V.R.C.C M20 Grade mix using 20mm graded H.G. metal using necessary Quantity of steel including cost and conveyance of all materials of approved quality and all labour charges such as steel centering charges, machine mixing of concrete and vibrating charges,curing etc., complete but excluding cost of steel and its fabrication charges etc.,complete for finished item of work as directed by the Engineer-in-Charge for Columns for Ground floor.

V.R.C.C. M-20- V.R.C.C M20 Grade mix using 20mm graded H.G. metal using necessary Quantity of steel including cost and conveyance of all materials of approved quality and all labour charges such as steel centering charges, machine mixing of concrete and vibrating charges,curing etc., complete but excluding cost of steel and its fabrication charges etc., complete for finished item of work as directed by the Engineer-in-Charge for Columns for First Floor.

V.R.C.C. M-20- V.R.C.C M20 Grade mix using 20mm graded H.G. metal using necessary Quantity of steel including cost and conveyance of all materials of approved quality and all labour charges such as steel centering charges, machine mixing of concrete and vibrating charges,curing etc., complete but excluding cost of steel and its fabrication charges etc.,complete for finished item of work as directed by the Engineer-in-Charge for Columns for Second Floor.

V.R.C.C. M-20- V.R.C.C M20 Grade mix using 20mm graded H.G. metal using necessary Quantity of steel including cost and conveyance of all materials of approved quality and all labour charges such as steel centering charges, machine mixing of concrete and vibrating charges,curing etc., complete but excluding cost of steel and its fabrication charges etc., complete for finished item of work as directed by the Engineer-in-Charge for Columns for Third Floor.

V.R.C.C. M-20- V.R.C.C M20 Grade mix using 20mm graded H.G. metal using necessary Quantity of steel including cost and conveyance of all materials of approved quality and all labour charges such as steel centering charges, machine mixing of concrete and vibrating charges,curing etc., complete but excluding cost of steel and its fabrication charges etc.,complete for finished item of work as directed by the Engineer-in-Charge For Lintels for Ground floor.

V.R.C.C. M-20- V.R.C.C M20 Grade mix using 20mm graded H.G. metal using necessary Quantity of steel including cost and conveyance of all materials of approved quality and all labour charges such as steel centering charges, machine mixing of concrete and vibrating charges,curing etc., complete but excluding cost of steel and its fabrication charges etc.,complete for finished item of work as directed by the Engineer-in-Charge For Lintels for First Floor.

V.R.C.C. M-20- V.R.C.C M20 Grade mix using 20mm graded H.G. metal using necessary Quantity of steel including cost and conveyance of all materials of approved quality and all labour charges such as steel centering charges, machine mixing of concrete and vibrating charges,curing etc., complete but excluding cost of steel and its fabrication charges etc.,complete for finished item of work as directed by the Engineer-in-Charge For Lintels for Second Floor.

V.R.C.C. M-20- V.R.C.C M20 Grade mix using 20mm graded H.G. metal using necessary Quantity of steel including cost and conveyance of all materials of approved quality and all labour charges such as steel centering charges, machine mixing of concrete and vibrating charges,curing etc., complete but excluding cost of steel and its fabrication charges etc.,complete for finished item of work as directed by the Engineer-in-Charge For Lintels for Third Floor.

V.R.C.C. M-20- V.R.C.C M20 Grade mix using 20mm graded H.G. metal using necessary Quantity of steel including cost and conveyance of all materials of approved quality and all labour charges such as steel centering charges, machine mixing of concrete and vibrating charges,curing etc., complete but excluding cost of steel and its fabrication charges etc.,complete for finished item of work as directed by the Engineer-in-Charge For Beams for Ground Floor.

V.R.C.C. M-20- V.R.C.C M20 Grade mix using 20mm graded H.G. metal using necessary Quantity of steel including cost and conveyance of all materials of approved quality and all labour charges such as steel centering charges, machine mixing of concrete and vibrating charges,curing etc., complete but excluding cost of steel and its fabrication charges etc.,complete for finished item of work as directed by the Engineer-in-Charge For Beams for First Floor.

V.R.C.C. M-20- V.R.C.C M20 Grade mix using 20mm graded H.G. metal using necessary Quantity of steel including cost and conveyance of all materials of approved quality and all labour charges such as steel centering charges, machine mixing of concrete and vibrating charges,curing etc., complete but excluding cost of steel and its fabrication charges etc., complete for finished item of work as directed by the Engineer-in-Charge For Beams for Second Floor.

V.R.C.C. M-20- V.R.C.C M20 Grade mix using 20mm graded H.G. metal using necessary Quantity of steel including cost and conveyance of all materials of approved quality and all labour charges such as steel centering charges, machine mixing of concrete and vibrating charges,curing etc., complete but excluding cost of steel and its fabrication charges etc.,complete for finished item of work as directed by the Engineer-in-Charge For Beams for Third Floor.

V.R.C.C. M-20- V.R.C.C M20 Grade mix using 20mm graded H.G. metal using necessary Quantity of steel including cost and conveyance of all materials of approved quality and all labour charges such as steel centering charges, machine mixing of concrete and vibrating charges,curing etc., complete but excluding cost of steel and its fabrication charges etc.,complete for finished item of work as directed by the Engineer-in-Charge For Roof Slab of 125mm thick for Ground Floor.

V.R.C.C. M-20- V.R.C.C M20 Grade mix using 20mm graded H.G. metal using necessary Quantity of steel including cost and conveyance of all materials of approved quality and all labour charges such as steel centering charges, machine mixing of concrete and vibrating charges,curing etc., complete but excluding cost of steel and its fabrication charges etc.,complete for finished item of work as directed by the Engineer-in-Charge For Roof Slab of 125mm thick for First Floor .

V.R.C.C. M-20- V.R.C.C M20 Grade mix using 20mm graded H.G. metal using necessary Quantity of steel including cost and conveyance of all materials of approved quality and all labour charges such as steel centering charges, machine mixing of concrete and vibrating charges,curing etc., complete but excluding cost of steel and its fabrication charges etc.,complete for finished item of work as directed by the Engineer-in-Charge For Roof Slab of 125mm thick for Second Floor.

V.R.C.C. M-20- V.R.C.C M20 Grade mix using 20mm graded H.G. metal using necessary Quantity of steel including cost and conveyance of all materials of approved quality and all labour charges such as steel centering charges, machine mixing of concrete and vibrating charges,curing etc., complete but excluding cost of steel and its fabrication charges etc.,complete for finished item of work as directed by the Engineer-in-Charge For Roof Slab of 125mm thick for Third Floor.

V.R.C.C. M-20- V.R.C.C M20 Grade mix using 20mm graded H.G. metal using necessary Quantity of steel including cost and conveyance of all materials of approved quality and all labour charges such as steel centering charges, machine mixing of concrete and vibrating charges,curing etc., complete but excluding cost of steel and its fabrication charges etc.,complete for finished item of work as directed by the Engineer-in-Charge For Roof Slabs for Septic tank and underground tank.

V.R.C.C. M-20- V.R.C.C M20 Grade mix using 20mm graded H.G. metal using necessary Quantity of steel including cost and conveyance of all materials of approved quality and all labour charges such as steel centering charges, machine mixing of concrete and vibrating charges,curing etc., complete but excluding cost of steel and its fabrication charges etc.,complete for finished item of work as directed by the Engineer-in-Charge for Sunshades for Ground floor.

V.R.C.C. M-20- V.R.C.C M20 Grade mix using 20mm graded H.G. metal using necessary Quantity of steel including cost and conveyance of all materials of approved quality and all labour charges such as steel centering charges, machine mixing of concrete and vibrating charges,curing etc., complete but excluding cost of steel and its fabrication charges etc.,complete for finished item of work as directed by the Engineer-in-Charge for Sunshades for First Floor.

V.R.C.C. M-20- V.R.C.C M20 Grade mix using 20mm graded H.G. metal using necessary Quantity of steel including cost and conveyance of all materials of approved quality and all labour charges such as steel centering charges, machine mixing of concrete and vibrating charges,curing etc., complete but excluding cost of steel and its fabrication charges etc.,complete for finished item of work as directed by the Engineer-in-Charge for Sunshades for Second Floor.

Providin plain Cement concrete (M 20) Nominal Mix using 40mm metal using concrete mixer Using 40 mm HBG metal including cost and conveyance of all materials to site including seignorage fee, Machine mixing, concrete laying tamping, vibrating, watering curing and all labour charges, hire and operational charges of machinery, water lead charges and including bailing of water.etc. complete for finished item of work as directed by the Engineer-in-charge

Construction of CRS Masonary in C.M (1:6) prop. 2nd sort Using hard granite stone including cost and conveyance of all materials like cement, sand, water, Granite stone etc. including cost of seigniorage charges on all materials, all taxes including labour for cutting stones to required size and shape, mixing of cement mortar construction, Scaffolding charges etc. complete for finished item of work as directed by the Engineer-in-Charge

Providing impervious coat to exposed RCC roof slab surface with CM(1:3) 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, including conveyannce of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc.,and Overheads & Contractors profit complete for finished item of work for ground floor as directed by the Engineer-in-Charge

Brick masonry for panel walls 230mm thick in superstructure with CM (1:6) prop: (cement : sand) using second class bricks of size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and Overheads & Contractors profit complete for finished item of work as directed by the Engineer-in-Charge for External Walls for Ground floor.

Brick masonry for panel walls 230mm thick in superstructure with CM (1:6) prop: (cement : sand) using second class bricks of size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and Overheads & Contractors profit complete for finished item of work as directed by the Engineer-in-Charge for External Walls for First Floor.

Brick masonry for panel walls 230mm thick in superstructure with CM (1:6) prop: (cement : sand) using second class bricks of size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and Overheads & Contractors profit complete for finished item of work as directed by the Engineer-in-Charge for External Walls for Second Floor.

Brick masonry for panel walls 230mm thick in superstructure with CM (1:6) prop: (cement : sand) using second class bricks of size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and Overheads & Contractors profit complete for finished item of work as directed by the Engineer-in-Charge for External Walls for Third Floor.

Reinforced Brick Masonry walls of 11.5cm in CM (1:6) using 2nd Class bricks having a crusing strength of not less than 35.00kg/cm² and using two mild steel bars of 6m dia in every third layer of brick masonry, with free joints of the main block work including cost and seigniorage charges and conveyance of all materials and water from approved sources to work site and all opertational, incidental, labour charges such as scaffolding mixing mortar constructing masonry lift charges, curing etc., complete for finished item of work as directed by the Engineer-in-Charge for Ground Floor.

Reinforced Brick Masonry walls of 11.5cm in CM (1:6) using 2nd Class bricks having a crusing strength of not less than 35.00kg/cm² and using two mild steel bars of 6m dia in every third layer of brick masonry, with free joints of the main block work including cost and seigniorage charges and conveyance of all materials and water from approved sources to work site and all opertational, incidental, labour charges such as scaffolding mixing mortar constructing masonry lift charges, curing etc., complete for finished item of work as directed by the Engineer-in-Charge for First Floor.

Reinforced Brick Masonry walls of 11.5cm in CM (1:6) using 2nd Class bricks having a crusing strength of not less than 35.00kg/cm² and using two mild steel bars of 6m dia in every third layer of brick masonry, with free joints of the main block work including cost and seigniorage charges and conveyance of all materials and water from approved sources to work site and all opertational, incidental, labour charges such as scaffolding mixing mortar constructing masonry lift charges, curing etc., complete for finished item of work as directed by the Engineer-in-Charge for Second Floor.

Reinforced Brick Masonry walls of 11.5cm in CM (1:6) using 2nd Class bricks having a crusing strength of not less than 35.00kg/cm² and using two mild steel bars of 6m dia in every third layer of brick masonry, with free joints of the main block work including cost and seigniorage charges and conveyance of all materials and water from approved sources to work site and all opertational, incidental, labour charges such as scaffolding mixing mortar constructing masonry lift charges, curing etc., complete for finished item of work as directed by the Engineer-in-Charge for Third Floor.

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded complete for finished item of work as directed by the Engineer-in-Charge for Ground Floor.

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded complete for finished item of work as directed by the Engineer-in-Charge for First Floor.

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded complete for finished item of work as directed by the Engineer-in-Charge for Second Floor.

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded complete for finished item of work as directed by the Engineer-in-Charge for Third Floor.

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded complete for finished item of work as directed by the Engineer-in-Charge for Septic tank and underground tank.

Supply , manufacture, making to specified design andLabour charges for fabricating steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power charges, excluding cost of fixing in position complete for finished item of work as directed by the Engineer-in-Charge.

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and Overheads & Contractors profit complete for finished item of work as directed by the Engineer-in-Charge for Ground Floor.

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and Overheads & Contractors profit complete for finished item of work as directed by the Engineer-in-Charge for First Floor.

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and Overheads & Contractors profit complete for finished item of work as directed by the Engineer-in-Charge for Second Floor.

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and Overheads & Contractors profit complete for finished item of work as directed by the Engineer-in-Charge for Third Floor.

Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and Overheads & Contractors profit complete for finished item of work as directed by the Engineer-in-Charge for Ground Floor.

Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and Overheads & Contractors profit complete for finished item of work as directed by the Engineer-in-Charge for First Floor.

Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and Overheads & Contractors profit complete for finished item of work as directed by the Engineer-in-Charge for Second Floor.

Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and Overheads & Contractors profit complete for finished item of work as directed by the Engineer-in-Charge for Third Floor.

Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and Overheads & Contractors profit complete for finished item of work as directed by the Engineer-in-Charge for Septic tank and underground tank.

Providing and applying wall putty of White Cement or Polymer or Cement based of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. including overheads & contractors profit complete for finished item of work for as directed by the Engineer-in-Charge

Flooring with vitrified polished floor tiles of 1st quality and make as approved by Engineer-in-charge of size 600 mm x 600 mm , 8mm to 10mm thick , noRmtal colour with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of seigniorage charges on all materials, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope etc., complete for finished item of work as directed by the Engineer- in-charge for Ground Floor.

Flooring with vitrified polished floor tiles of 1st quality and make as approved by Engineer-in-charge of size 600 mm x 600 mm , 8mm to 10mm thick , noRmtal colour with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of seigniorage charges on all materials, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope etc., complete for finished item of work as directed by the Engineer- in-charge for First Floor.

Flooring with vitrified polished floor tiles of 1st quality and make as approved by Engineer-in-charge of size 600 mm x 600 mm , 8mm to 10mm thick , noRmtal colour with borders and design as per the approved flooring pattern as directed by the Engineer-In -Charge set over a base coat of CM (1:8) prop. 12mm thick over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of seigniorage charges on all materials, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope etc., complete for finished item of work as directed by the Engineer- in-charge for Second Floor.

Providing skirting to internal walls to 10 cm /15 cm height with vitrified tiles 8mm to 10mm thick , noRmtal colour, length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work as directed by the Engineer- in-charge for Ground Floor.

Providing skirting to internal walls to 10 cm /15 cm height with vitrified tiles 8mm to 10mm thick , noRmtal colour, length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work as directed by the Engineer- in-charge for First Floor.

Providing skirting to internal walls to 10 cm /15 cm height with vitrified tiles 8mm to 10mm thick , noRmtal colour, length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work as directed by the Engineer- in-charge for Second Floor.

Flooring with High Polished Granite Slabs 16 to 18 mm Thick other than black set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete for finished item of work as directed by the Engineer- in-charge for Ground Floor.

Flooring with High Polished Granite Slabs 16 to 18 mm Thick other than black set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete for finished item of work as directed by the Engineer- in-charge for First Floor.

Flooring with High Polished Granite Slabs 16 to 18 mm Thick other than black set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete for finished item of work as directed by the Engineer- in-charge for Second Floor.

Providing skirting to internal walls to 15 cm height/risers of steps with 8 mm thick mirror polished granite tiles length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work as directed by the Engineer- in-charge for Ground Floor.

Providing skirting to internal walls to 15 cm height/risers of steps with 8 mm thick mirror polished granite tiles length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work as directed by the Engineer- in-charge for First Floor.

Providing skirting to internal walls to 15 cm height/risers of steps with 8 mm thick mirror polished granite tiles length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work as directed by the Engineer- in-charge for Second Floor.

Providing dadooing to walls with Coloured Glazed tiles of 1st quality of size approved by Engineer-in-Charge set over base coat of CM(1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work as directed by the Engineer- in-charge for Ground Floor.

Providing dadooing to walls with Coloured Glazed tiles of 1st quality of size approved by Engineer-in-Charge set over base coat of CM(1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work as directed by the Engineer- in-charge for First Floor.

Providing dadooing to walls with Coloured Glazed tiles of 1st quality of size approved by Engineer-in-Charge set over base coat of CM(1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,complete for finished item of work as directed by the Engineer- in-charge for Second Floor.

Supplying and fixing of stainless steel (grade 304) hand railing as per approved drawing with top rail of 50 mm dia pipe , 2 Nos of inteRmtediate rails of 25mm dia and vertical rail of 40mm dia fixed with base plate of 75mmx75mmx10mm using bonding agent and anchor fastner and welding for fixing railing, buffing, polishing all members of the railing thouroughly, lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges etc., complete for finished item of work as directed by the Engineer- in-charge

Painting to new walls with 2 coats of ready mixed oil bound wahsable distemper of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as directed by the Engineer- in-charge

Painting to new walls with 2 coats of Plastic Emulsion Paint Asian/ Berger/ Nerolac/ Saicoat/Indocem or Equivalent and shade over Priming Coat with Cement Primer Waterbase Interior Gr- 1 Asian/ Berger/ Nerolac/ Saicoat/Indocem or Equivalenton New Plastered Surfaceafter thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges but excluding GST etc, complete for finished item of work as directed by the Engineer- in-charge

Supplying & fixing of Fully panel doors with Medium Teak wood frame and shutter, Main frame of size 0.125Mtsx0.25Mt, the shutter frame size 0.15x0.0375mts filled with 0.025mts thick panels including ISI Marked Brass fixtures, 2Nos of brass Aldrop 450mm long, 2 Nos of brass tower bolts of 300mmx10mm dia, 2nos of 450mm long brass handles, 2Nos of door stoppers, including labour charges for fixing. size 2000mmx2100mm complete for finished item of work as directed by the Engineer- in-charge for Ground Floor - Main Door - MD

Applying French Spirit polishing Two or more coats on new works including a coat of wood filler, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., and Overheads & Contractors profit complete for finished item of work as directed by the Engineer- in-charge

Flush type Doors with 35mm Thick Flush Shutters with Bondwood solied Block Board Type Faced on both the sides with Commercial Type Plywood & Teak wood frame of size 0.075x0.1Mts which is embedded in walls. (Schedule Item no. 301) (BLD-CSTN-13-16) door shutter of 35mm thick single shutter with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol foRmtaldehyde synthetic resin factory made confoRmting to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of door frame, flush shutter, including ISI marked aluminium fixtures , 1 No. aldrop 250 mm long, 1 No. tower bolt of 300 mm x 12mm dia, 2 Nos 125mm long handles,1 No. rubber bush including supplying and fixing Venerred particle board with commercial and teak venerring on both sides to full height of the shutter inside including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as as directed by the Engineer- in-charge

Supplying & fixing of Unplasticised Poly Vinyl Chloride (UPVC) sliding windows two track sliding - 62 Series duly manufactured using UPVC reinforced profiles of 62mmx60mmx2.25mm for outer frames, 66mmx38mmx2.25mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 Microns of minimum thickness of 1.5mm prefabricated and welded through fusion welding the window sash shall be fitted with 6mm thick cleat float glass of reputed make duly fixed with grey colourTPV Gasket for sash&glazingbead shall be coextrude with grey colour of soft PVC.Door shall be provided with standard hardware&multi point locking system bent handle espagulate.The system is to be installed at site using anchor fasteners,silicon rubber sealant,easy glazing/deglazing at site etc., including cost and conveyance of all materials,accessories,labour charges for trasportation. Weathering seal resistant accessories like clippling locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation,erection at site complete for finished item of work as directed by the Engineer- in-charge

Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC sections with Glazing bead shall be co-extruded with Grey colour soft PVC. having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall size of 60 mm x 55 mm x 2.40 with reinforcement of 1 mm thickness and Mullion with overall size of 74 mm x 60 mm x 2.40 mm with reinforcement of 1 mm thickness. (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin).Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall thickness of frame & Mullion shall be 2.4 mm., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work for all floors as directed by the Engineer- in-charge

II.ELECTRICAL WORKS

Supply and Fixing of 25mm dia 2.2mm thick PVC pipe heavy grade (ISI MARK) concealed in Roof Slabs with all required MS deep boxes and all accessories including masonary work and labour charges etc., complete for finished item of work as directed by the Engineer- in-charge

Supply and Fixing of 25mm dia 1.8mm thick PVC pipe Medium (ISI MARK) with all accessories with MS Junction box noRmtal range of Sudhakar/Meco Plast/Modi/Avon plast make concealed in wall with MS switch box including all required accessories including masonary work and labour charges etc., complete for finished item of work as directed by the Engineer- in-charge

S&F of 6A 2 in one socket 6A switch Modular type Switch control MS flush boxes with cover plate fixing on common board including all labour charges etc., complete for finished item of work as directed by the Engineer- in-charge

Wiring with 2 of 14/0.3mm (1.0 Sq.mm) P.V.C. insulated F.R. flexible copper cable (ISI MARK) in existing pipe with 6A Modular switch control - 3 nos and 3/2 pin Modular sockets - 3 nos fixing on separate board including all labour charges etc., complete for finished item of work as directed by the Engineer- in-charge

Supply & fixing of 16A/6A, 2 in one socket 16A, switch Modular type Switch control MS flush boxes with front cover plate including all labour charges etc., complete for finished item of work as directed by the Engineer- in-charge

Supply and Fixing of fan hook in RCC slab of 15mm dia MS Rod While laying the slab for all floors complete for finished item of work as directed by the Engineer- in-charge

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A modular switch, Ceiling rose/BH/SBH Modular switches with cover plate including all labour charges etc., complete for finished item of work as directed by the Engineer- in-charge

Supply and run of 2 of 4.0 sq mm PVC insulated flexible copper cable and 1 run of 2.5 sq.mm flexible PVC insulated copper cable for earthing in the existing conduit pipe for power point including labour charges for 16A sockets. complete for finished item of work as directed by the Engineer- in-charge

Supply and run of 4 of 6 Sq mm PVC insulated flexible copper cable and 1 run of 2.5 Sq mm flexible PVC insulated flexible copper cable in the existing conduit pipe for run of mains from main panel board to TPN DB'S with pin type lugs and connections etc.,complete for finished item of work as directed by the Engineer- in-charge

Supply & run of 4 of 10.0 Sqmm PVC insulated flexible copper cable and one run of 4.0 Sqmm flexible PVC insulated copper cable in the existing conduict pipe for run of mains from main panel board to TPN DB"s with pin type lugs and connections etc., complete for finished item of work as directed by the Engineer- in-charge

Supply and fixing cubicle Panel board make up of 16 gauge CRCA Sheet suitable to accommodate the following switch gear with 250A, 35KA TP MCCB as incomer & 1 No of 63A 25 KA TP MCCB, 1 No of 125A 25 KA TP MCCB, with 0-500V Volt meter Conzerv, 0-250A Ammeter Conzerv, indication lamp led type & 3 nos of 200/5A CTS as outgoings, with fabrication of bus bar details & insulators for phase & neutral etc including making connections etc.,complete for finished item of work as directed by the Engineer- in-charge

Supply and fixing of TPN 4 way distribution board IP-43 (Metal Door) 40A FP Isolator Protection flushed in wall suitable for three phase ELCB/RCCB/FP as incomer and 10KA SP pole outgoing MCB's in sheet metal enclosure with 40 Amps - 4 pole isolator incomer and 12 nos of 6 to 32 Amps single pole, 10 KA breaking capacity MCB outgoings including making connections etc., complete for finished item of work as directed by the Engineer- in-charge

Supply and fixing of TPN 4 way distribution board IP-43 (Metal Door) 63A FP Isolator Protection flushed in wall suitable for three phase ELCB/RCCB/FP as incomer and 10KA SP pole outgoing MCB's in sheet metal enclosure with 63 Amps - 4 pole isolator incomer and 12 nos of 6 to 32 Amps single pole, 10 KA breaking capacity MCB outgoings including making connections etc., complete for finished item of work as directed by the Engineer- in-charge

Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 20mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C.Chamber of 400m x 400m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm length with all accessories and labour charges complete for finished item of work as directed by the Engineer- in-charge

Supply and run of 25mmX6mm GI strip including cost of all accessories and labour charges etc complete for finished item of work as directed by the Engineer- in-charge

Supply and run of 40mmX6mm GI strip including cost of all accessories and labour charges etc complete for finished item of work as directed by the Engineer- in-charge

Supply and run of 25mmX3mm copper strip including cost of all accessories and labour charges etc complete for finished item of work as directed by the Engineer- in-charge

Supply of the following PVC XLPE aRmtoured cable 1100 V. Grade with ISI mark stranded / solid, aluminimum conductor complete for finished item of work as directed by the Engineer- in-charge

Earth work excavation of Trench in hard ground soil, laying of U.G cables upto 50 sq. mm on sand cusion covering the cable with bricks and back filling of Trench duly providing route indicator (As per general instruction S.No. 14 of SSR) embedded in C.C including cost and conveyance of materials and labour charges etc.,complete for finished item of work as directed by the Engineer- in-charge

Labour charges for run of U.G cable upto 50 sq mm on wall / existing pipe with necessary fixing arrangments such as saddles, clamps,wooden separators etc., (as directed by departmental official) with No.10 SWG G.I wire for earth connections for the cables etc., complete for finished item of work as directed by the Engineer- in-charge

Supply, Transportation and fixing of 1x28W surface pendent mounting (T5) luminaire plastic housing with integrated reflector extruded alluminium luminaire with Electronic Ballasts Including 1Nos 4'-28W tube Including fixing on wall / ceiling on TW/PVC round blocks and all standrad accessories etc.,complete for finished item of work as directed by the Engineer- in-charge

Supply and Transportation and fixing of 4' x 40 Watt Box typeflourescent single tube light fitting with energy saving electronic ballast consumings 28W suitable for 40Watt to be fitted on take wood blocks with flexible 3 Core Wire etc., complete for finished item of work as directed by the Engineer- in-charge

Supply and Fixing of batten holder/angle holder on existing block with 18W CFL Lamp and all labour charges etc.,complete for finished item of work as directed by the Engineer- in-charge

Supply, Transportation of Ceiling fan 48"(1200mm) ceiling fans with 3 blades & double ball bearings with out Regulators and all standard accessories and giving connections etc., complete for finished item of work as directed by the Engineer- in-charge

Supply of Modular type Electronic fan regulator hum free step type socket size in the existing switch board etc.,complete for finished item of work as directed by the Engineer- in-charge

Labour charges for fixing of ceiling fan with regulator including transportation, and giving connections with twin core wire etc complete for finished item of work as directed by the Engineer- in-charge

Supply of fresh air exhaust fan of Heavy duty 250V A.C.50Hz.. 300mm size (12") / 375 mm (15") 900 R.P.M etc., complete for finished item of work as directed by the Engineer- in-charge

Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete for finished item of work as directed by the Engineer- in-charge

Supply, Transportation and fixing of Integral 150W LED Street light Body, having protective toughened glass cover / temperature protective custom molded polycarbonate diffuser, TheRmtal shock and impact resistant IK07 fixed to the housing by SS screws Suitable lense on LEDs, Less Glare, IP 66 protected, wide operating voltage range, P.F > 0.90, System having efficacy >120 lumens / watt, with Ingress protection IP66, BIS approved Potted driver, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring,etc complete with BIS certification with 5 years warranty. and fixing of luminaire on wall with 1.0mt 40mm dia GI pipe bracket and anti-tilting arrangements, 2.5 Sq.mm flexible copper cable including masonary work and all labour charges and giving connections etc., complete for finished item of work as directed by the Engineer- in-charge

Supply of INVERTER Model Cool type split AC unit with high wall mounted Single Split indoor unit and outdoor condencing unit HeRmtetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of perfoRmting Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3.5 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord , built-in stabilizer (Voltage range 160- 264 volts) and cordless remote control 1.5 TR capable of delivery 18000 BTU/hr and above with operating on refrigerant R-410etc.,complete for finished item of work as directed by the Engineer- in-charge

Supply, transportation, installation, testing and commissioning of _____ passenger / Goods Gearless & Machine Room less elevator with following specifications with connected minor civil works required for installation of Lift including all accessories, scoffolding, requried channels, loading and unloading of materials etc, including comprehensive maintenance of lifts during the defect liability period etc., complete for finished item of work as directed by the Engineer- in-charge

Sub total of Electrical works

III.Water Supply & Sanitary Works

Supplying and fixing European Water Closet of 1st quality confoRmting to IS:2556-Part-2-1973 of premium make make white glazed with 'S' trap, supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern of premium make with internal components and CP short bend and fixed using required size of nails and screws, 12mm PVC connections with brass union nuts CP coated and 12.70mm dia. Anglar stop cock with wall flange including cost and conveyance of all materials to site, for all floors complete with all leads and lifts and all other operations necessary etc., complete for finished item of work as directed by the Engineer-in-Charge

Supply & Fixing of Bibcock cum Health Faucet with 1m long tube and wall hook of premium make, Chrome Finish with 7 years warranty/ including labour charges complete as per specifications and all other operations necessary to complete for finished item of work as directed by the Engineer- in-charge

Supplying and fixing White Glazed flat back half stall urinal of 1st quality confoRmting to IS 2556-1995 with standard CP Spreader of overall size 95x95x57 mm confoRmting to IS 2556-part 6 section -VI -1974 fixed with screws complete of premium make of size 410x265x305 mm as approved by Engineer in charge including supply & fixing of unions and clamps push cock waste coupling bottle trap 12.7 mm PVC connection with brass plumber union nut 38.10 mm dia PVC solid waste pipe embeded in walls with suitable trap leading up to the floor channel etc. including cutting and making good walls, including cost and conveyance of all materials to site ,labour charges , for all floors complete as per specifications and all other operations necessary to complete for finished item of work as directed by the Engineer- in-charge

Supplying and fixing of 16mm to 20 mm thick polished marble slab partitioins of size 4' 0" x 2' 0" for urinals including full rounding the edges, fixing in position, polishing, including cost and conveyance of all materials and labour charges,complete as per specifications and all other operations necessary to complete for finished item of work as directed by the Engineer- in-charge

Supplying and fixing Indian make Flat Back Wash Hand Basin of premium make 1st quality confoRmting to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread confoRmting to IS:2963-1979 and fitted with pillar cock of premium make complete with standard CI brackets including wooden blocks,1 No. 12.70mm PVC connection with brass union nuts CP coated , 1 No.12.70mm Angular stop cock of premium make , 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges, for all floors complete as per specifications and all other operations necessary to complete for finished item of work as directed by the Engineer- in-charge

Supply & Fixing of Wall Mixer 15 mm CP finish brass body wall mixer of premium make confoRmting to IS 8931 with center distance 150 mm complete as per specifications and all other operations necessary to complete for finished item of work as directed by the Engineer- in-charge

Supply & Fixing of Long body bib Cock of premium make of not less than 400 grams weight with quarter turn spindle internal / external threaded connection confoRmting to IS 8931, complete as per specifications and all other operations necessary to complete for finished item of work as directed by the Engineer- in-charge

Supplying and fixing CP bib taps of 15 mm brass body CP finish bib tap of premium make of not less than 300 grams weight with quarter turn spindle with either internal or external threaded conenction confoRmting to IS 8931 complete as per specifications and all other operations necessary to complete for finished item of work as directed by the Engineer- in-charge

supply and fixing Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size, complete with fitting, including cost & conveyance of all materials labour charges, for all floors as per specifications and all other operations necessary to complete for finished item of work as directed by the Engineer- in-charge

Supply & Fixing of brass towel rod of premium make 600 mm long and 20 mm dia with brackets for all floors as per specifications and all other operations necessary to complete for finished item of work as directed by the Engineer- in-charge

Supply & Fixing of brass soap dish of premium make , Chrome Finish for all floors as per specifications and all other operations necessary to complete for finished item of work as directed by the Engineer- in-charge

Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm, plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges, for all floors as per specifications and all other operations necessary to complete for finished item of work as directed by the Engineer- in-charge

S&F Polyethylene-Aluminium-Polyethylene (PE-AL-PE) composite pressure pipes confoRmting to IS-15450-2004 with UV stabilized, carbon black for hot & cold water supply, capable to withstand pressure up to 80 C including all special composite fittings, plastic & brass blend inserts for elbows, tees, reducers, couplers, connectors etc complete with MS Iron clamps at 1.0 M spacing including cutting, chasing walls, making good, laying pipes, fixing in position, testing and commissioning etc 25mm OD pipe (25 mm dia) etc.,complete for finished item of work as directed by the Engineer- in-charge

Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS-778 Class - I , Indian make heavy type including cost and conveyance of all materials , labour charges , as per specifications and all other operations necessary to complete for finished item of work as directed by the Engineer- in-charge (25 mm dia NB Size)

Supplying & fixing Gunmetal (GM) Horizontal Check (Non return) Valve as per IS-778, I-class heavy duty - 40 mm NB Size including cost and conveyance of all materials, labour charges, as per specifications and all other operations necessary to complete for finished item of work as directed by the Engineer- in-charge (40 mm dia NB Size )

Supply, delivery, installation, testing, commissioning of ISI mark Submersible 3 HP, 3 Phase, 6 stags pump set suitable for 156mm dia bore well with high quality wear resistance and dynamically balanced bronze impellar with stainless steel shaft sleeves, pump coupling and pivot of 3 phase 415V, 50 Hz A.C power supply copper winding with water proof insulation and high precision strength not to be effected by chemical in water and suitable bronze bearings with nut and bolts etc., with necessary H-type clamp of suitable size and strength etc as per specifications and all other operations necessary to complete for finished item of work as directed by the Engineer- in-charge

Supply & Fixing of D.O.L Starter 415V, 3 phase, 50Hz.. enclosed with no volt coil and overload protection with necessary materials, etc., complete suitable upto 7.5.HP as per specifications and all other operations necessary to complete for finished item of work as directed by the Engineer- in-charge

Drilling 163mm/6 1/2 mm dia bore well by the down the hole hammer drilling in all foRmtation to a depth as desired by the dept and remaining the bore to suit insertion of suitable dia pvc casing pipe of 6 kg/sq.cm c including insertion of casing pipe and any other relevent mtrl required up to the depthh as desired by the dept including cost of transportation of rigs and supporting vehicles from villages to villages and bore development conducying yield test.crew charges cost of consumable etc., complete with all leads and lifts and all other operations necessary to complete for finished item of work as directed by the Engineer- in-charge

Supplying and fixing CI Nahani traps 100 mm dia Inlet- 75 mm (3") outlet pipe - 4 Kgs 1st quality ISI marked confoRmting to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges, as per specifications and all other operations necessary to complete for finished item of work as directed by the Engineer- in-charge

Supplying and fixing of SWR PVC pipes for wash basins 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, at all floor levels etc., complete for finished item of work as directed by the Engineer- in-charge for 40 mm dia UPVC pipe for wash basins.

Supplying and fixing of SWR PVC pipes for wash basins 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, at all floor level etc.,.complete for finished item of work as directed by the Engineer- in-charge 75 mm dia UPVC pipe in floor & ducts (down takes).

Supplying and fixing of SWR PVC pipes for wash basins 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, at all floor levels etc.,complete for finished item of work as directed by the Engineer- in-charge for 110 mm dia U PVC pipe in floors & ducts (down takes).

Supplying & fixing 150 mm x 100 mm SWG gully traps of ISI make confoRmting to ISI 651 & 4127 with C.I Grating & Constructing Brick masonry in CM 1:6 prop. InteRmtediate chamber and fitted with 304.8 mm x 288.6mm (12"x9") C.I Frame and hinged cover as directed by Engineer-in-charge including cost and conveyance of all materials to site, labour charges,as per specifications and all other operations necessary to complete for finished item of work as directed by the Engineer- in-charge

Supply, Transportation and fixing of storage / Pressure type Vertical / Horizontal 230/250V single phase 2000watts ISI mark 5 Star rated water heater with SS tank and ABS plastic body of 15 Ltrs capacity to withstand up to 6.5 bar of water pressure including all standard accessories and dead weight pressure reducing valve on out let side, including cost of 2 Nos SS flexible braided pipe, testing and all labour charges etc.,complete for finished item of work as directed by the Engineer- in-charge for GF &FF.

Supply and fixing of 75 mm dia CI Vent pipe of 3 mts lenth fitted with AC cowl and mosquito proof wire mesh including cost and conveyance of all materials to site and labour charges for placing and fixing in position etc., complete for finished item of work as directed by the Engineer- in-charge for SEPTIC TANK.

Supplying & fixing premium make CPVC Pipes OD Pipe- SDR 11 including the cost of pipe, required number of connectors such as elbows, tees, couplers, connectors, solvent cement etc., and labour charges complete including cost and conveyance of all materials to site, all operational, incidental , labour charges, etc. complete for finished item of work as directed by Engineer-incharge for 15.90 mm Nominal bore for Ground floor, First floor and Second floor.

Supplying & fixing premium make CPVC Pipes OD Pipe- SDR 11 including the cost of pipe, required number of connectors such as elbows, tees, couplers, connectors, solvent cement etc., and labour charges complete including cost and conveyance of all materials to site, all operational, incidental , labour charges, etc. complete for finished item of work as directed by Engineer-incharge for 22.20 mm Nominal bore for Ground floor, First floor and Second floor.

Supplying & fixing premium make CPVC Pipes OD Pipe- SDR 11 including the cost of pipe, required number of connectors such as elbows, tees, couplers, connectors, solvent cement etc., and labour charges complete including cost and conveyance of all materials to site, all operational, incidental , labour charges, etc. complete for finished item of work as directed by Engineer-incharge for 54.00 mm Nominal bore for under ground tank to over head tank.

IV. DISMANTLING OF OLD BUILDING (CIVIL WORKS)

Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lifts and lead etc.,complete for finished item of work as directed by the Engineer- in-chargefor Lime mortor.

Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lifts etc.,complete for finished item of work as directed by the Engineer- in-charge for Cement mortor.

Dismantling Wood Work Wrought and Planed Fixed in Frames of Trusses upto a height of 5 m above Plinth Level as per Technical Specification Clause 202 MORD / MORTH including stacking of dismantled material with all lifts complete for finished item of work as directed by the Engineer- in-charge

Dismantling doors, windows and clear storey windows, ventilators etc.; (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachments etc., ., complete for finished item of work as directed by the Engineer- in-charge

V.PARKING SHED FOR NEW OFFICE BUILDING

Earth work excavation and depositing on bank (manual means) with initial lead of 10m and initial lift of 3m in Loamy & Clayey Soils like BC Soils, Red Earth & Ordinary Gravelly Soils ( SS 20-B) including all operational incidental labour charges such as shoring, strutting, sheeting, planking and dewatering including cost of hire charges of T & P, labour charges etc.,complete for finished item of work as directed by the Engineer- in-charge for Foundation of Building

Plain Cement Concrete corresponding to M5 grade as per IS 456 equivalent to (1:5:10) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using,40mm size Hard Blasted Granite (IS383, 1970) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials, all operational, incidental, and labour charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work as directed by the Engineer- in-charge for Foundations and Flooring Bed

Plain Cement Concrete corresponding to M10 grade as per IS 456 equivalent to (1:3:6) proportion nominal mix (cement: fine aggregate: Coarse aggregate) using , 20mm size Hard Blasted Trap (IS383, 1970) Machine Crushed graded metal from from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including sales & other taxes on all materials, all operational, incidental and labour charges such as mixing, laying, curing concrete, etc., complete for finished item of work as directed by the Engineer- in-charge for Bed Blocks and Hold Fasts

Manufacturing supplying and fixing of all structural steel works like heavy steel works like Trusses, Stanchions, Heavy Beams and Girders including cost of welding rods, power charges as per approved designs and drawings including fixing in position, cost conveyance of all materials and labour charges etc,. complete for finished item of work as directed by the Engineer- in-charge

Roofing will be provided with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove etc., complete for finished item of work as directed by the Engineer- in-charge

Flooring with chequered cement concrete heavy duty tiles confiRmting to IS:13801 using aggregates, cement, pigments of size 300mm x 300mm and thickness 25mm of any shade as approved by Engineer - In - Charge set over base coat of cement mortar (1:6), 12 mm thick using screened sand over CC bed alredy laid or RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm and jointed with neat white cement to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water and tiles etc.,and overheads & contractors profit complete for finished item of work as directed by the Engineer- in-charge

VI.REPAIRS AND RENOVATION OF IDC BUILDING

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work as directed by the Engineer- in-charge for Building & Septic Tank.

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundation and under flooring bed using coarse aggregate 40mm size, hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and Overheads & Contractors profit complete for finished item of work as directed by the Engineer- in-charge for Below Footings and floorings & Septic Tank.

Filling with useful available excavated earth (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operaitonal, incidental, labour charges, hire charges of T&P etc., and Overheads & Contractors profit complete for finished item of work as directed by the Engineer- in-charge

V.R.C.C. M-20- V.R.C.C M20 Grade mix using 20mm graded H.G. metal using necessary Quantity of steel including cost and conveyance of all materials of approved quality and all labour charges such as steel centering charges, machine mixing of concrete and vibrating charges,curing etc., complete but excluding cost of steel and its fabrication charges etc., complete for finished item of work as directed by the Engineer- in-charge for Footings, septic tank.

V.R.C.C. M-20- V.R.C.C M20 Grade mix using 20mm graded H.G. metal using necessary Quantity of steel including cost and conveyance of all materials of approved quality and all labour charges such as steel centering charges, machine mixing of concrete and vibrating charges,curing etc., complete but excluding cost of steel and its fabrication charges etc., complete for finished item of work as directed by the Engineer- in-charge for for Plinth Beams.

V.R.C.C. M-20- V.R.C.C M20 Grade mix using 20mm graded H.G. metal using necessary Quantity of steel including cost and conveyance of all materials of approved quality and all labour charges such as steel centering charges, machine mixing of concrete and vibrating charges,curing etc., complete but excluding cost of steel and its fabrication charges etc.,complete for finished item of work as directed by the Engineer- in-charge For Lintels for Ground floor.

V.R.C.C. M-20- V.R.C.C M20 Grade mix using 20mm graded H.G. metal using necessary Quantity of steel including cost and conveyance of all materials of approved quality and all labour charges such as steel centering charges, machine mixing of concrete and vibrating charges,curing etc., complete but excluding cost of steel and its fabrication charges etc.,complete for finished item of work as directed by the Engineer- in-charge for Beams and Roof Slabs for Ground Floor-125mm thick slab and Septic tank.

Construction of CRS Masonary in C.M (1:6) prop. 2nd sort Using hard granite stone including cost and conveyance of all materials like cement, sand, water, Granite stone etc. including cost of seigniorage charges on all materials, all taxes including labour for cutting stones to required size and shape, mixing of cement mortar construction, Scaffolding charges etc. complete for finished item of work as directed by the Engineer- in-charge

Brick masonry for panel walls 230mm thick in superstructure with CM (1:6) prop: (cement : sand) using second class bricks of size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc.,and Overheads & Contractors profit complete for finished item of work as directed by the Engineer-in-Charge for External walls-Ground floor

Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded complete for finished item of work as directed by the Engineer- in-charge for Ground Floor ,Septic tank.

Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and Overheads & Contractors profit complete for finished item of work as directed by the Engineer- in-charge for Ground Floor

Plastering 20mm thick in two coats with base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and Overheads & Contractors profit complete for finished item of work as directed by the Engineer- in-charge for Ground Floor,Septic tank.

Flooring with Ceramic Tiles of 7.3mm thick 1st. quality of Non-skid red or white full body Ceramic floor tiles of size not less than 300 x 300 mm and thickness between 7-8 size as approved by Engineer - in - charge set over a base coat of CM (1:8), 12mm thick laid over flooring bed / V.R.C.C. slab, with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs of cement per Sq.m and jointed with neat white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, ceramic tiles etc. to site, sales and other taxes on all materials, all operational, incidental and labour charges such as mixing of cement mortar, laying, curing, lift charges etc., complete for finished item of work as directed by the Engineer- in-charge for Ground Floor.

Providing dadooing to walls with Coloured Glazed tiles of 1st quality of size approved by Engineer-in-Charge set over base coat of CM(1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,complete for finished item of work as directed by the Engineer- in-charge for Ground Floor

Flush type Doors with 35mm Thick Flush Shutters with Bondwood solied Block Board Type Faced on both the sides with Commercial Type Plywood & Teak wood frame of size 0.075x0.1Mts which is embedded in walls. (Schedule Item no. 301) (BLD-CSTN-13-16) door shutter of 35mm thick single shutter with bond wood solid block board type Core having cross bands and face veneers, hot pressed bonded with water proof phenol foRmtaldehyde synthetic resin factory made confoRmting to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of door frame, flush shutter, including ISI marked aluminium fixtures , 1 No. aldrop 250 mm long, 1 No. tower bolt of 300 mm x 12mm dia, 2 Nos 125mm long handles,1 No. rubber bush including supplying and fixing Venerred particle board with commercial and teak venerring on both sides to full height of the shutter inside including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work as directed by the Engineer- in-charge for Ground Floor

Supplying & fixing of Unplasticised Poly Vinyl Chloride (UPVC) sliding windows two track sliding - 62 Series duly manufactured using UPVC reinforced profiles of 62mmx60mmx2.25mm for outer frames, 66mmx38mmx2.25mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 Microns of minimum thickness of 1.5mm prefabricated and welded through fusion welding the window sash shall be fitted with 6mm thick cleat float glass of reputed make duly fixed with grey colourTPV Gasket for sash&glazingbead shall be coextrude with grey colour of soft PVC.Door shall be provided with standard hardware&multi point locking system bent handle espagulate.The system is to be installed at site using anchor fasteners,silicon rubber sealant,easy glazing/deglazing at site etc., including cost and conveyance of all materials,accessories,labour charges for trasportation. Weathering seal resistant accessories like clippling locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation,erection at site complete for finished item of work as directed by the Engineer- in-charge for Ground Floor.

Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC sections with Glazing bead shall be co-extruded with Grey colour soft PVC. having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall size of 60 mm x 55 mm x 2.40 with reinforcement of 1 mm thickness and Mullion with overall size of 74 mm x 60 mm x 2.40 mm with reinforcement of 1 mm thickness. (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin).Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall thickness of frame & Mullion shall be 2.4 mm., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work as directed by the Engineer- in-charge for Ground Floor.

Manufacturing supplying and fixing of all structural steel works like heavy steel works like Trusses, Stanchions, Heavy Beams and Girders including cost of welding rods, power charges as per approved designs and drawings including fixing in position, cost conveyance of all materials and labour charges etc.,complete for finished item of work as directed by the Engineer- in-charge for Ground Floor

Roofing will be provided with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove etc.,complete for finished item of work as directed by the Engineer- in-charge for Ground Floor.

Filling with Gravel by manual means in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work as directed by the Engineer-in-Charge for Ground Floor

DISMANTLING clearing away and carefully stacking materials useful for reuse in Kadapa slabs or Shahabad stone slabs flooring on sand bed including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work as directed by the Engineer- in-charge for Ground Floor

Providing and placing on terrace (at all floor levels) polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges for placing and fixing in position etc.,complete for finished item of work as directed by the Engineer- in-charge for Ground Floor

Flooring with Polished Shabad/Tandur blue Slabas 15 to 18 mm thick set over a base coat of CM (1:8), 12mm thick (joints of stone must be flushed) over C.C. bed already laid or R.C.C. roof slab only after it is properly cured, cleaned, moistered and where necessary treated with neat grey cement slurry of honey like consistency spred at3.3 kgs of cement for 1 sqm. and jointed with neat cement paste to full depth, including cost and conveyance of all materials like cement, sand, water, flooring stones etc. to site, sales and other taxes on all materials, all operational, incidental and labour charges such as dressing of flooring stones to the required sizes, mixing of cement mortar, laying, jointing, curing, lift charges etc., complete for finished item of work as directed by the Engineer- in-charge Ground Floor

b. Electrical Works:

Supply and Fixing of 25mm dia 1.8mm thick PVC pipe Medium (ISI MARK) with all accessories with MS Junction box noRmtal range of Sudhakar/Meco Plast/Modi/Avon plast make concealed in wall with MS switch box including all required accessories including masonary work and labour charges etc., complete for finished item of work as directed by the Engineer- in-charge

S&F of 6A 2 in one socket 6A switch Modular type Switch control MS flush boxes with cover plate fixing on common board including all labour charges etc.,complete for finished item of work as directed by the Engineer- in-charge

Wiring with 2 of 14/0.3mm (1.0 Sq.mm) P.V.C. insulated F.R. flexible copper cable (ISI MARK) in existing pipe with 6A Modular switch control - 3 nos and 3/2 pin Modular sockets - 3 nos fixing on separate board including all labour charges etc., complete for finished item of work as directed by the Engineer- in-charge

Supply & fixing of 16A/6A, 2 in one socket 16A, switch Modular type Switch control MS flush boxes with front cover plate including all labour charges etc., complete for finished item of work as directed by the Engineer- in-charge

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A modular switch, Ceiling rose/BH/SBH Modular switches with cover plate including all labour charges etc., complete for finished item of work as directed by the Engineer- in-charge

Supply and run of 2 of 4.0 sq mm PVC insulated flexible copper cable and 1 run of 2.5 sq.mm flexible PVC insulated copper cable for earthing in the existing conduit pipe for power point including labour charges for 16A sockets etc,.complete for finished item of work as directed by the Engineer- in-charge

Supply and run of 4 of 6 Sq mm PVC insulated flexible copper cable and 1 run of 2.5 Sq mm flexible PVC insulated flexible copper cable in the existing conduit pipe for run of mains from main panel board to TPN DB'S with pin type lugs and connections etc.,complete for finished item of work as directed by the Engineer- in-charge

Supply & run of 4 of 10.0 Sqmm PVC insulated flexible copper cable and one run of 4.0 Sqmm flexible PVC insulated copper cable in the existing conduict pipe for run of mains from main panel board to TPN DB"s with pin type lugs and connections etc.,complete for finished item of work as directed by the Engineer- in-charge

Supply and fixing of TPN 4 way distribution board IP-43 (Metal Door) 40A FP Isolator Protection flushed in wall suitable for three phase ELCB/RCCB/FP as incomer and 10KA SP pole outgoing MCB's in sheet metal enclosure with 40 Amps - 4 pole isolator incomer and 12 nos of 6 to 32 Amps single pole, 10 KA breaking capacity MCB outgoings including making connections etc., complete for finished item of work as directed by the Engineer- in-charge

Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 20mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C.Chamber of 400m x 400m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm length with all accessories and labour charges complete for finished item of work as directed by the Engineer- in-charge

Supply and run of 25mmX6mm GI strip including cost of all accessories and labour charges etccomplete for finished item of work as directed by the Engineer- in-charge

Supply and run of 40mmX6mm GI strip including cost of all accessories and labour charges etc complete for finished item of work as directed by the Engineer- in-charge

Supply and run of 25mmX3mm copper strip including cost of all accessories and labour charges etc complete for finished item of work as directed by the Engineer- in-charge

Supply of the following PVC XLPE aRmtoured cable 1100 V. Grade with ISI mark stranded / solid, aluminimum conductor complete for finished item of work as directed by the Engineer- in-charge

Earth work excavation of Trench in hard ground soil, laying of U.G cables upto 50 sq. mm on sand cusion covering the cable with bricks and back filling of Trench duly providing route indicator (As per general instruction S.No. 14 of SSR) embedded in C.C including cost and conveyance of materials and labour charges etc., complete for finished item of work as directed by the Engineer- in-charge

Labour charges for run of U.G cable upto 50 sq mm on wall / existing pipe with necessary fixing arrangments such as saddles, clamps,wooden separators etc., (as directed by departmental official) with No.10 SWG G.I wire for earth connections for the cables complete for finished item of work as directed by the Engineer- in-charge

Supply and Transportation and fixing of 4' x 40 Watt Box typeflourescent single tube light fitting with energy saving electronic ballast consumings 28W suitable for 40Watt to be fitted on take wood blocks with flexible 3 Core Wire etc., complete for finished item of work as directed by the Engineer- in-charge

Supply and Fixing of batten holder/angle holder on existing block with 18W CFL Lamp and all labour charges etc., complete for finished item of work as directed by the Engineer- in-charge

Supply, Transportation of Ceiling fan 48"(1200mm) ceiling fans with 3 blades & double ball bearings with out Regulators and all standard accessories and giving connections etc., complete for finished item of work as directed by the Engineer- in-charge

Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete for finished item of work as directed by the Engineer- in-charge

Supply, Transportation and fixing of Integral 150W LED Street light Body, having protective toughened glass cover / temperature protective custom molded polycarbonate diffuser, TheRmtal shock and impact resistant IK07 fixed to the housing by SS screws Suitable lense on LEDs, Less Glare, IP 66 protected, wide operating voltage range, P.F > 0.90, System having efficacy >120 lumens / watt, with Ingress protection IP66, BIS approved Potted driver, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring,etc complete with BIS certification with 5 years warranty. and fixing of luminaire on wall with 1.0mt 40mm dia GI pipe bracket and anti-tilting arrangements, 2.5 Sq.mm flexible copper cable including masonary work and all labour charges and giving connections etc., complete for finished item of work as directed by the Engineer- in-charge

Supply of Modular type Electronic fan regulator hum free step type socket size in the existing switch board. (make:- GM/LEGRAND/MYRIUS/L&T etc) as directed by the Engineer- in-charge Ground floor

c. Water supply and sanitary Works:

Supplying and fixing European Water Closet of 1st quality confoRmting to IS:2556-Part-2-1973 of premium make make white glazed with 'S' trap, supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and 10 litres capacity single flush PVC low level cistern of premium make with internal components and CP short bend and fixed using required size of nails and screws, 12mm PVC connections with brass union nuts CP coated and 12.70mm dia. Anglar stop cock with wall flange including cost and conveyance of all materials to site, for all floors complete with all leads and lifts and all other operations necessary etc., complete for finished item of work as directed by the Engineer- in-charge

Supply & Fixing of Bibcock cum Health Faucet with 1m long tube and wall hook of premium make, Chrome Finish with 7 years warranty/ including labour charges complete as per specifications and all other operations necessary to complete for finished item of work as directed by the Engineer- in-charge

Supplying and fixing White Glazed flat back half stall urinal of 1st quality confoRmting to IS 2556-1995 with standard CP Spreader of overall size 95x95x57 mm confoRmting to IS 2556-part 6 section -VI -1974 fixed with screws complete of premium make of size 410x265x305 mm as approved by Engineer in charge including supply & fixing of unions and clamps push cock waste coupling bottle trap 12.7 mm PVC connection with brass plumber union nut 38.10 mm dia PVC solid waste pipe embeded in walls with suitable trap leading up to the floor channel etc. including cutting and making good walls, including cost and conveyance of all materials to site ,labour charges , for all floors complete for finished item of work as directed by the Engineer- in-charge

Supplying and fixing of 16mm to 20 mm thick polished marble slab partitioins of size 4' 0" x 2' 0" for urinals including full rounding the edges, fixing in position, polishing, including cost and conveyance of all materials and labour charges,complete as per specifications and all other operations necessary to complete the finished item of work as per drawing for Ground floor or as directed by the Engineer-in-Charge

Supplying and fixing Indian make Flat Back Wash Hand Basin of premium make 1st quality confoRmting to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread confoRmting to IS:2963-1979 and fitted with pillar cock of premium make complete with standard CI brackets including wooden blocks,1 No. 12.70mm PVC connection with brass union nuts CP coated , 1 No.12.70mm Angular stop cock of premium make , 31.75mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges, for all floors complete for finished item of work as directed by the Engineer- in-charge

Supply & Fixing of Wall Mixer 15 mm CP finish brass body wall mixer of premium make confoRmting to IS 8931 with center distance 150 mm complete as per specifications and all other operations necessary to complete for finished item of work as directed by the Engineer- in-charge

Supply & Fixing of Long body bib Cock of premium make of not less than 400 grams weight with quarter turn spindle internal / external threaded connection confoRmting to IS 8931, complete as per specifications and all other operations necessary to complete for finished item of work as directed by the Engineer- in-charge

Supplying and fixing CP bib taps of 15 mm brass body CP finish bib tap of premium make of not less than 300 grams weight with quarter turn spindle with either internal or external threaded conenction confoRmting to IS 8931 complete as per specifications and all other operations necessary to complete for finished item of work as directed by the Engineer- in-charge

supply and fixing Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size, complete with fitting, including cost & conveyance of all materials labour charges, for all floors as per specifications and all other operations necessary to complete for finished item of work as directed by the Engineer- in-charge

Supply & Fixing of brass towel rod of premium make 600 mm long and 20 mm dia with brackets for all floors as per specifications and all other operations necessary to complete for finished item of work as directed by the Engineer- in-charge

Supply & Fixing of brass soap dish of premium make , Chrome Finish for all floors as per specifications and all other operations necessary tocomplete for finished item of work as directed by the Engineer- in-charge

Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm, plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges, for all floors as per specifications and all other operations necessary to complete for finished item of work as directed by the Engineer- in-charge

S&F Polyethylene-Aluminium-Polyethylene (PE-AL-PE) composite pressure pipes confoRmting to IS-15450-2004 with UV stabilized, carbon black for hot & cold water supply, capable to withstand pressure up to 80 C including all special composite fittings, plastic & brass blend inserts for elbows, tees, reducers, couplers,connectors etc complete with MS Iron clamps at 1.0 M spacing including cutting, chasing walls, making good, laying pipes, fixing in position, testing and commissioning etc 25mm OD pipe (25 mm dia) etc.,complete for finished item of work as directed by the Engineer- in-charge

Supplying and fixing CI Nahani traps 100 mm dia Inlet- 75 mm (3") outlet pipe - 4 Kgs 1st quality ISI marked confoRmting to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges, as per specifications and all other operations necessary tocomplete for finished item of work as directed by the Engineer- in-charge

Supplying and fixing of SWR PVC pipes for wash basins 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, at all floor levels. (APSS No. 1302 1319 & 1326) as per specifications and all other operations necessary to complete for finished item of work as directed by the Engineer- in-charge for 40 mm dia U PVC pipe for wash basins.

Supplying and fixing of SWR PVC pipes for wash basins 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, at all floor levels. (APSS No. 1302 1319 & 1326) as per specifications and all other operations necessary tocomplete for finished item of work as directed by the Engineer- in-charge for 75 mm dia UPVC pipe in floor & ducts (down takes).

Supplying and fixing of SWR PVC pipes for wash basins 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, at all floor levels. (APSS No. 1302 1319 & 1326) as per specifications and all other operations necessary tocomplete for finished item of work as directed by the Engineer- in-charge for 110 mm dia U PVC pipe in floors & ducts (down takes).

Supplying & fixing 150 mm x 100 mm SWG gully traps of ISI make confoRmting to ISI 651 & 4127 with C.I Grating & Constructing Brick masonry in CM 1:6 prop. InteRmtediate chamber and fitted with 304.8 mm x 288.6mm (12"x9") C.I Frame and hinged cover as directed by Engineer-in-charge including cost and conveyance of all materials to site, labour charges,as per specifications and all other operations necessary to complete for finished item of work as directed by the Engineer- in-charge

Supply and fixing of 75 mm dia CI Vent pipe of 3 mts lenth fitted with AC cowl and mosquito proof wire mesh including cost and conveyance of all materials to site and labour charges for placing and fixing in position etc., complete for finished item of work as directed by the Engineer- in-charge for SEPTIC TANK.

Supplying & fixing premium make CPVC Pipes OD Pipe- SDR 11 including the cost of pipe, required number of connectors such as elbows, tees, couplers, connectors, solvent cement etc., and labour charges complete including cost and conveyance of all materials to site, all operational, incidental , labour charges, etc. complete for finished item of work as directed by the Engineer- in-charge for 15.90 mm Nominal bore for Ground floor.

Supplying & fixing premium make CPVC Pipes OD Pipe- SDR 11 including the cost of pipe, required number of connectors such as elbows, tees, couplers, connectors, solvent cement etc., and labour charges complete including cost and conveyance of all materials to site, all operational, incidental , labour charges, etc. complete for finished item of work as directed by the Engineer- in-charge for 22.20 mm Nominal bore for Ground floor.

supply and Transportation of 1 HP 10 Stage single phase ISI submersiblemotor pumpset suitable for 4" Borewell etc.,complete for finished item of work as directed by the Engineer- in-charge MOTOR

Supply and Transportation of control panel for single phase submersible motors up to 3 HP @ 220V 50Hz operating range between 80 to 240V including supply and fixing of Direct -on - Line LK / SIEMENS / CROMPTON make Volt meter and Ammeter with starting and running capacitors assembled with ISI mark contactors and fitted with ISI mark MCB etc.,complete for finished item of work as directed by the Engineer- in-charge PANEL BOARD

Supply of 3 Core 2.5 Sqmm Flat Copper cable as per IS 694:1990 for Submersible Motors including all material and labour charges etc, complete for finished item of work as directed by the Engineer- in-charge For Motor