Interior HVAC Electrical and allied work for the Library and Microbiological laboratory for Drug and Food Control Organisation at Patoli Mangotrian Jammu Contract No 02

Amount

CLEAN ROOM

Supply, installation, testing & commissioning of Pre painted Galvanized Iron (PPGI) Wall partitions Panels SPECIALISED FOR CLEAN ROOM. TECHNICAL AS PER CLEAM ROOM STANDARDS. * Panel Thickness: 80mm * Panel Height: 8'

Supply, installation, testing & commissioning of Pre painted Galvanized Iron (PPGI) Wall partitions Panels SPECIALISED FOR CLEAN ROOM. TECHNICAL AS PER CLEAM ROOM STANDARDS. * Panel Thickness: 60mm * Panel Height: 8'

Supply, installation, testing & commissioning of Pre painted Galvanized Iron (PPGI) Wall CLADDING Panels SPECIALISED FOR CLEAN ROOM. TECHNICAL AS PER CLEAM ROOM STANDARDS. * Panel Thickness: 30mm* Panel Height: 8'

Supply, installation, testing & commissioning of Pre painted Galvanized Iron (PPGI) Wall CEILLING Panels SPECIALISED FOR CLEAN ROOM. TECHNICAL AS PER CLEAM ROOM STANDARDS. * Panel Thickness: 30mm

Supply, installation, testing & commissioning of Supporting Flashings & Accessories: L-Flashing, U-Channel,Silicon, Rivets & Nutt Bolts and allied accessories

Clean room False Vision window size :- 1000 mm (W) x 1000 mm (H) with Double Glass in the PPGI wall complete work.

Supply, Installation, Testing of Return PPGI Air Riser Panel with Panel Size :- 2440 x 1000 with duct Size :- 2640 x 600

Supply, Installation, Testing of Single Door: Size: 900 x 2100,Leaf Sheet Thickness - 0.8mm,Frame Sheet Thickness - 1.6mm, Infill – Honeycomb

Supply, Installation, Testing of Single Door Accessories:3 Hinges (Altos),Door Closer (Altos) ,1 Set. Back to Back Handle, 1 Nos. Vision (400 x 600),Drop Seal .

Supply, Installation, Testing of Aluminium Coving with L-Flashing as per IS Standdards

Supply, Installation, Testing of Aluminium 2D Corner as per IS standards .

Supply, Installation, Testing of Aluminium 3D Corner as per IS standards .

Supply, Installation, Testing of Epoxy Coving between wall and floor complete.

Supply, Installation, Testing of Epoxy Flooring in the clean area complete work with 4.0(2+2) mm thickness.

Supply, Installation, Testing of Supply, Installation, of Aluminum Truss With Suspension

CEILING CUT OUT CHARGES FOR ELECTRICAL/HVAC SYSTEM

WALL CUT OUT CHARGES FOR ELECTRICAL

CEILING CUT OUT CHARGES FOR ELECTRICAL/HVAC SYSTEM

Supply, Installation, Testing of Supply, Installation, PVC CONDUIT PIPE(As per actual at site)

AHU UNITS

Supply, Installation, Testing & Commissioning of Double Skin AHU consisting of Aluminium frame work, 3way corners with double skin panels thickness. 43 mm having outer walls of 0.67 thick pre coated sheet and inner skin .67mm GI sheets, insulated with 38 kg./sq. meter injected PUF and complete with extruded frame for motor and blower duty mounted with DIDW centrifugal BACKWARD curved blower to be approved by Engineer Incharge/Technical Committee established along with Air & fire proof Rexene canvas connection, Motor base should be adjustable type, its electrical drive motor approved by Engineer Incharge/Technical Committee established, pre & Fine filter section 10 & 05 micron , DX coils section with 6 RD coils 12 FPI, Pullies will be taper lock type with "A" Or "B" section fan belt, Coils Deep try will be S.S.-304, with 0.8 mm thick sandwich type, View Window on the service door & Light in the AHU unit for servicing purpose, should be in the AHU unit AHU base will be make in 18 Gauge G.S.S. sheet with Aluminium casting Two way Lifting corner.

For:-AHU 1 Capacity:- 2.0 TR / 1200 CFM /125 MM

For:-AHU 2 Capacity:- 2.0 TR / 1400 CFM /125 MM

For:-AHU 3 Capacity:- 3 TR / 2200 CFM /125 MM

For:-AHU 4 Capacity:- 8.5 TR / 3600 CFM /125 MM

Condensing unit : Supply, Installation, Commissioning of Air Cooled Condensing Unit Make:- to be approved by Engineer Incharge/Technical Committee established with Compressore, Service valve, WITH GAS

For:-AHU 1 Capacity:- 2.0 TR

For:-AHU 2 Capacity:- 2.0 TR

For:-AHU 3 Capacity:- 3.0 TR

For:-AHU 4 Capacity:- 8.5 TR

LOOOOOO

DRIYER & EXPENSION VALVE : Supply, Installation, Commissioning of Refrigerant Filter Driyer, Expension Valves, Hand Shut-valve

Capacity :- 2.0 TR

Capacity :- 3.0 TR

Capacity :- 8.5 TR

Supply, Installation, Commissioning of U-TRAP FOR AHU DRAIN WORK

Supply, Installation, Commissioning of GAS R-22

SUPPLY & INSTALLATION OF DRAIN PIPE WITH INSULATION

50 mm CPVC pipe for AHU drain

32 mm CPVC pipe for AHU drain

SUPPLY & INSTALLATION OF CABLE TRAY WITH NECESSARY SUPPORTS FOR REFRIGERENT PIPING

100mm wide

200mm wide

300 mm wide

SUPPLY & INSTALLATION OF FLEXIBLE / ARMOURED ELECTRICAL CABLE WITH PVC CONDUTE PIPE & NECESSARY SUPPORTS & FIXING

1.5 mm x 3.0 core

2.5 mm x 4.0 core

4.0 mm x 4.0 core

6.0 mm x 4.0 core

VOLUME CONTROL DAMPER :Supply, Installation, Testing and commissioning of multi blade box type GI construction damper FOR AHU

Supply, Installation Testing and commissioning of multi blade box type ALUMINIUM construction damper FOR RETURN AIR balancing

GRILL: Supply, Installation Testing & Commissioning of powder coated perforated (65%) supply air grills made out of extruded Aluminium sheets

DUCTING WORK: Supply, Installation Testing & Commissioning of G.S.S. 24 Gauge ducting complete in all respect along with silicon sealant. Duct Sheet make :- to be approved by Engineer Incharge/Technical Committee established

DUCTING INSULATION WORK: Supply & Application of 9/12 mm MM Thickness. XLPE TOC Slim insulation Cross Linked polyethylene foam with aluminium metalized foil for insulation on Supply duct running inside Building area and with UV Foils for insulation for supply Ducts running outside building area i.e. exposed to atmosphere

ELECTRICAL PANEL

Supply, Installation and testing of Electrical Panel which should be standard make:- to be approved by Engineer Incharge/Technical Committee established Panel will be specious enough to carry out maintenance work. With MCB, CONTRACTOR, O/L RELAY, R,Y,B INDICATOR, CONTROL WIRING, SINGLE PHASE PREVENTOR ETC.

For:-AHU 1 Capacity:- 3.0 TR / 1200 CFM /125 MM

For:-AHU 2 Capacity:- 3.0 TR / 1200 CFM /125 MM

For:-AHU 3 Capacity:- 5.5 TR / 2200 CFM /125 MM

For:-AHU 4 Capacity:- 8.5 TR / 3600 CFM /125 MM

HEPA FILTER HOUSING: Supply, Installation of GI Powder Coated HEPA FILTERS HOUSING WITH Thickness 1.2 mm ( 18G) GI Volume Control damper, Canvas Connection DOP PORT, SUITABLE FOR FOLLOWING SIZE FILTERS

610 MM X 610 MM X 305 MM

450 MM X 450 MM X 305 MM

305 MM X 305 MM X 305 MM

HEPA FILTER: Supply, Installation of HEPA FILTERS (0.3 Micron) FLANCE TYPE ALUMINIUM FRAM WITH 99.97&% Efficiency

610 MM X 610 MM X 305 MM

450 MM X 450 MM X 305 MM

305 MM X 305 MM X 305 MM

RISER FILTER:: Supply, Installation of Riser FILTERS 20 Micron FLANGE TYPE ALUMINIUM FRAM WITH 90% Efficiency

450 MM X 450 MM X 305 MM

305 MM X 305 MM X 305 MM

STRIP HEATER: Supply & Installation of Strip Heater Bank as per ISHRAE STANDARDS and AHU Specification with fitting accessories.

Supply, Installation & Testing of Digital RH Cum Temp. Controller Meter with ITS RH AND TEMP IMPORTED SENSORS, CONNECTORS, CASING, WIRING AND CONTROLLER WITH DIGITAL DISPLAY AND ALSO FITTING ACCESSORIES FOR AHU Make :- to be approved by Engineer Incharge/Technical Committee established

Supply, Installation & Testing of Magnehelic differential Pressure Gauge with SS cover For fine or pre filters of some standard/ reputed, make for AHU

Supply, Installation & Testing of Magnehelic differential Pressure Gauge with SS cover For Room of some standard/ reputed make to be approved by Engineer Incharge/Technical Committee established , for Room

Fine , pre & fresh air & exhaust air filters

Supply & Installation of 5.0 MICRON FINE FILTERS WITH FLANCH TYPE ALUMINIUM

Supply & Installation of 10 MICRON PRE FILTERS WITH FLANCH TYPE ALUMINIUM

Supply & Installation of 10 MICRON Fresh air FILTERS WITH FLANCH TYPE ALUMINIUM

Supply & Installation of 10 MICRON Exhaust air FILTERS WITH FLANCH TYPE ALUMINIUM

VALIDATION, DOCUMENTATION : Lab validation should include following tests:

a) Operation Qualification

b) Performance Qualification

c) Air flow velocity and ACPH test

d) Pressure Balancing

e) Filter integrity Test(DOP)

f) Particle Count Test

g) Air flow pattern recovery Test

h) Temperature and RH monitoring for three days by data logger.

ELECTRICAL PART

Supply, Installation Testing of Electrical Work With Switch, Sockets, Wiring etc. (We will take main supply form your Existing Main Panel) * Modular Switches WITH FRONT PLATE * Modular Sockets WITH FRONT PLATE * Wiring (for Light & fixture & Normal & Power Sockets) * Distribution Board * MCB

MAIN LT AND DISTRIBUTION PANEL

Supply, Installation and testing of MAIN LT and Electrical Distribution Panel with Bus Bar; Incomer MCCB, Monitor device, Metering device, and also future extension 25% L&T/SIEMANS Panel will be specious enough to carry out maintenance work. With MCB, CONTRACTOR, O/L RELAY, R,Y,B INDICATOR, CONTROL WIRING, PREVENTOR, DB ETC.

SUPPLY & INSTALLATION OF MAIN ELECTRICAL CABLE ALUMINIUM ARMOUED WITH ITS TERMINATION WITH LAYING AND FIXING ACCESSORIES. WIRING IS FROM MAIN PANEL TO DG SET AND LT PANEL AND AHU PANEL

Supply & installation including testing, commissioning of Flat Diffuser type LED Light fixture of 12”X12” with driver complete in all respect for Class 5, class-6, class-7 clean rooms and other facility areas which extension of existing wiring with multi strand wires of appropriate sizes for Clean Room Light (make to be approved by Engineer Incharge/Technical Committee established ) complete in all respect. Size :- 305 x 305 mm

Providing and Installation of New 4 kg ABC type Fire Extinguisher

EARTHING

EARTHING: Proving and laying of copper strips for proper Earthing of air conditioning equipments along with servo stabilizer. The job includes earth work by using labour for making pit of suitable size for proper earthing and after that laying Copper rod of suitable size (2 mtrs app) and filling the pit with chemical (Chemical Earthing). Job also includes clamping the copper rod with the copper strip of size (20 x 3 mm) with nut and bolts and connecting different floors with the main Copper strip with copper wire (8 no.) Complete job includes cost of Copper rod, Copper Strips and Copper wire, chemical and other related material and cost of labour including all the taxes thereof.

Fire Alarm System with Heat & Smoke Deductor, Alram Penal Hooter Etc.

Supply & Installation of LPG GAS Line Work For Bio-safety, & LAF Room with All required valve accessoires complete accessories

CLEAN ROOM EQUIPMENTS

Supply Installation of SS-304 Cross Over Bench with shoes stores shelves

Supply Installation of SS-304 DYNAMIC Almirah for Clean Dress Stores with-out door

Supply, Installation, of SS-304 Static Pass Box Working size :- 600 mm (W) x 600 mm (D) x 600 mm (H)

Supply, Installation, of SS-304 Dynamic Pass Box Working size :- 600 mm (W) x 600 mm (D) x 700 mm (H)

FABRICATION OF CGI SHED, MS STRUCTURE WITH ALLIED CIVIL WORKS

Fabrication of CGI shed to cover AHU’s AND OUTDOOR UNIT AND ELECTRICAL PANEL FOR AHU in the building including major and minor civil and MS structure works. Complete job.

PLUMBING WORKS

PLUMBING WORK ON SITE REQUIRED FOR SUPPLY OF WATER AND DRAIN FROM LAB AREA.

SUPPLY AND FIXING OF SS LAB WORKING TBALES WITH GRANITE ON TOP AND SS STOOLS. FOR :- MEDIA PREP. INCUBATION DECON ROOM OFFICE AND STORE ROOM MEDIA WASHING. MLT SLT

SUPPLY AND INSTALLATION AND TESTING AND COMISSIONING OF UPS LOAD:- 10 KVA Make : (NUMERIC )

Miscullanies Work:- 1) CIVIL WORK FOR DUCT CROSSING. 2) UNLOADING OF MATERIAL 3) FOUNDATION WORK FOR AHU UNIT, OUTDOOR UNIT AND ELECTRICAL PANEL. 4) CRAIN FOR MATERIAL LIFTING AND SHIFTING 5) STAIRS AND SCAFFOLING

Supply, Installation, Testing, & Commissioning of SS GMP Traps & it's Connection with main drain line including all civil work

FLOORING WORK:- REQUIRED A ZERO LEVEL KOTA STONE ON FLOOR FOR ZERO INDULATION EPOXY WORK

DG SET:- SITC of 3 Phase, water cooled DG Set of capacity of 82.5 KVA including cabling, earthing, changeover, civil foundation, etc. of some standard/ ISI make to be approved by Engineer Incharge/Technical Committee established

SERVO STABILIZER:- SITC of 3 Phase, Oil cooled unbalanced type 150KVA servo stabilizer with an input range of 156V (Phase to Neutral) with constant output of 415V±1 % of some standard/ISI make to be approved by Engineer Incharge/Technical Committee established

Providing and fixing of CCTV Camera Color Camera 1/3" CCD, IR type, dome shaped, 480 TV lines resolution which work in low light - 6 nos. Providing and fixing of CCTV monitoring Devices 6 Channel standalone / Network version DVR Make: to be approved by Engineer Incharge/Technical Committee established Hard Disk with 2TB (TERA byte) Capacity -to be approved by Engineer Incharge/Technical Committee established 6 Channel Power Supply of reputed Make Supply Laying of Co-axial Cable with necessary Accessories Wall mounted monitor (at least 20-inch LED/LCD) location after discussion from depatment near to micro lab make to be approved by Engineer Incharge/Technical Committee established

Providing and fixing of EPABX SYSTEM Providing and fixing of TELEPHONE INSTRUMENT WITH LINE - 6 Nos.

Providing And Fixing of DATA CABLE LAN WIRING FOR INTERNET ACCESS WITH ALL REQUIRED SOCKETS.

Providing and fixing of Door interlocking systems shall be complete with controller module, push button stations with LED indication, electromagnetic locks for 4 dooR interlocking.

ASIAN SCIENTIFIC INDUSTRIES

7 Steps Consultores Pvt Ltd