Installation of High Mast Light at Ganesh Mandir near Atta Chaki more Mohishila colony at Ward No. 42 Borough-IV, Under Asansol Municipal Corporation

Amount

Installation of High Mast Light at ganesh mandir,near atta chaki more mohishila colony ward-42,MPLADS Fund for Scheme by Hon'ble MP,40-Asansol P.C.

Supply of 12.0 / 12.50 meter High mast lighting system with its accessories. Mast shaft shall be in two sections with steel material confirming to BSEN 10025 and material shall be high tensile steel, grade S355, hot dip galvanised confirming to BSEN ISO 1461 and suitable for wind velocity as per IS 875. It shall also include accessories for high mast including head frame, 2 continues steel wire rope 6 mm dia (7/19 construction), trailing cable, double drum winch, Galvanised Lantern carriage arrangement suitable for up to 9 luminaires symmetrically & its control gear( Make of Gear Box : New Allen Berry works / Chandra Gear / Elecon Engineering / Shanti Engineering) boxes and lightning finial. The mast shall have an integral power tool installed inside the base compartment for its operation along with Supply & Fixing of Cu Cable of Power Tool motor, Wiring for Luminaries, Anchor Plate, Foundation Bolt, Nut, Washer, and common Template all complete. Luminaire wiring materials not included in this item. (Make: Bajaj / Transrail / Valmond/ Utkarsh /Skipper)

Erection of high Mast (12.0 / 12.50 M) on RCC foundation with cement concrete considering actual SBC of soil, with the help of suitable modern engg. tools and Plants, wiring of luminaries with all wiring materials like PVC insulated flexible cable of suitable copper conductor core of 1.5 mm² lugs, up to 10 nos. 6A MCB along with construction of shallow foundation with cement concrete for high Mast considering the safe soil bearing capacity as per site condition, as per drawing and design of manufacturer of the mast. The soil test and submission of its report is within the scope of the work.

Supply of Flood light luminaries 80-120W LED (IP65 with efficiency>100 Lumen/watt and <20% lumendepriciation over min 5 years) with pressure die cast aluminium housing and heat resistant toughtened flat glass complete of approved make with constant current LED driver Make: Bajaj (BAMEG 120W LED) or Equivallent make Phillips/Crompton

Supply of Flood light luminaries 80-120W LED (IP65 with efficiency>100 Lumen/watt and <20% lumendepriciation over min 5 years) with pressure die cast aluminium housing and heat resistant toughtened flat glass complete of approved make with constant current LED driver Make: Bajaj (BAMEG 120W LED) or Equivallent make Phillips/Crompton

Supplying of 16 Sq mm four core Aluminum armored cable Heavels / Phenolex make

Laying one No Cable of 16 Sq mm four core Aluminum armored in underground trench 460mm wide X 760 mm average depth with brick protection on the top of the cable with 8 Nos bricks per meter including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Earthling with 80 mm dia G.I. pipe ( TATA medium) X 3.0 mtrs long and 1X 19/8 stranded G.I. hot dip wire 4.0 mtrs long, 25 mm dia X 150 mm long galvanized bolts, double nuts, double washers including socketing at both ends of stranded G.I. hot dip wire by crimping sockets/ thimbles and supplying , fixing 40 mm dia G.I. pipe (ISI medium) protection 3.00 mtr long to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 mtrs for morrum soil.

Supplying and fixing compression type gland complete with brass gland rubber rings for dust & moisture proof entry of 16 Sq. mm four core PVC armored cable

Supplying & fixing of 50 mm. dia G.I. pipe of Tata Medium protection with necessary fittings & jointing materials as required including Bituminous Road Cutting.

ABHIJIT MONDAL

ANAND CONSTRUCTION

M.P. CONSTRUCTION CO.

SONA ENTERPRISE

P. K. ENTERPRISE