Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹96.6 LAccepted-Finance NOT AVAILABLE | FARIDABAD | HARYANA | 121004 | L1 | Accepted-Finance Lowest one | |
| 2 | L2₹98 L+₹1.4 L (1.42%)Rejected-Finance GE W COLABA MUMBAI | CHANDRAPUR | MAHARASHTRA | 441205 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹99.9 L+₹3.3 L (3.41%)Rejected-Finance NOT AVAILABLE | L3 | Rejected-Finance Other than lowest |
Tender Value
Refer Docs
EMD Value
₹2.2 L
Closing Date
9 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NW NOFRA
Dr homi Bhabha road new navy nagar colaba mumbai
PROVISION OF GALLEY DINING AND ACCOMMODATION FOR INLIVING SAILORS AND PROVISION OF LAVATORY BLOCK AND SEWAGE LINE FOR INLIVING ACCOMMODATION AND CERTAIN OTHER SANCTIONED WORKS IN CERTAIN AREAS UNDER GE NW NOFRA COLABA MUMBAI
2023_MES_574901_1
8108
Open Tender
Civil Works
Item Rate
330 days
Mumbai
Please refer tender documents
8 documents required · 8 mandatory
₹1,000
GE NW NOFRA
₹2.2 L
Yes
15 Feb 2023
13 Jan 2023
14 Feb 2023
13 Jan 2023
9 Feb 2023
27 Jan 2023
13 Jan 2023 - 26 Jan 2023
Amount
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/ dense soil, complete all as specified & directed.
M&L for cement concrete 1:4:8, type D-2 , (40mm graded stone aggregate) as in fundations ,filling as mass concrete complete all as specified and directed.
M&L for 40mm thick cement concrete 1:2:4, type B-0 as in damp proof course to horizontal or vertical surfaces including necessary formwork , complete all as specified & directed.
M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6, complete all as specified & directed.
M&L brick work sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls in cement mortar 1:4 etc all as specified and directed.
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water,complete all as specified & directed.
M&L for Rendering 15mm thick cement plaster in cement mortor 1:6 on brick or concrete surfaces in patches, surfaces to be finished even and smooth without using extra cement, complete all as specified & directed.
M&L for Rendering 15mm thick cement plaster in cement mortor 1:4 on brick or concrete surfaces in patches, surfaces to be finished even and smooth without using extra cement, including using waterproofing compound @ of 3% as specified in SSR Part-I, complete all as specified & directed.
M&L for Rendering 5mm thick on fair faces of ceilings in CM (1:3) & rendering is to be finishing even & smooth without using extra cement, complete all as specified & directed.
M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat primer on 2 mm thick wall care putty (JK/Birla) all as specified and directed.
Preparation of new plastered surfaces of wall and apply two coats of Acrylic emulsion exterior paint of required shade : (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) and upto 5th floor of bldg.,complete all as specified & directed.
Material and labour for preparation of new plastered surface of ceiling and applying two coats of oil emuslion distemper over a coat of primer on 2 mm thick putty all as specified and directed.
M&L for preparation of old plastered surface of ceiling and applying 2 coats of oil emuslion distemper over 2 mm thick putty all as specified and directed.
M&L for preparation of old plastered surface of wall and applying two coats of oil emuslion distemper over a coat of 2mm thick putty,complete all as specified and directed.
M&L for complete removal of existing treatment on walls including washing down, rubbing down and apply two coats of Acrylic emulsion exterior paint of required shade : (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) and upto 5th floor of bldg complete all as specified and directed.
M&L for Forming jambs, etc. to openings (to foregoing item) in CM 1:4, including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work,complete all as specified & directed.
Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified & directed.
M&L for broken stone / boulders Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified.
M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in subbase complete all as specified.
M&L for 100mm thick PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) as in flooring and including spike rolling to surfaces or making impressions of expanded metal, whislt the concrete is green complete all as specified & directed.
M&L for Cutting openings, through brick walls (built in cement mortar) for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, complete all as specified & directed.
Dismantling floor, hearth or wall tiling (fixed at any portion but not backing) including cement mortar bedding and removing and removing rubbish off the premises (outside MD land) complete all as specified and directed.
M&L for Coloured non Skid Ceramic tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.
M&L for Coloured non Skid Ceramic tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, incl 15 mm thick backing coat in CM 1:4 , complete all as specified and directed.
M&L for Non skid coloured ceramic tiles 7 to 8 mm thick(square/Rectanglar) area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floor including 15mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified & directed.
M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (square/Rectanglar) area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm in floor including 15mm thick screed bed or bedding layer for laying floor finishes in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified & directed.
M&L for coloured glazed ceramic tiles 450x300x7 / 350x250 x7 mm mm thick but as on vertical surfaces such as skirting/dado including 15 to 20mm thick to make uniform surface backing coat in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified & directed.
M&L for Machine cut kota stone slab flooring 20-25mm thick over 20mm thick cement screed base in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed.
Demolition of brickwork or stone masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles & ht. upto 16th floor of bldg.,complete all as specified & directed.
Taking down chowkats or frames exc 1.5 sqm each but n.exc 4 sqm with shutters (without taking off shutters from the frame) complete all as specified & directed.
M&L 2nd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified & directed.
S&F 35mm thick factory made Plain framed, panelled shutters (two panel), 2nd class HW rail and style, with lock rail and panel of 9mm B.W.P commercial ply with commercial veneering on both faces. The size of rail and style as per IS: 1003 (Part-I), klin seasoned and chemically pressure treated etc all as specified & directed in SSR Part-I.
S&F 30mm thickness Flush shutters, solid core construction, with particle board core, commercial type on both sides and both faces is covered with decorative face veneer with lipping / frame work with teak wood bidding of 2mm thick to match, complete all as specified & directed.
S&F 35mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. divided in to squares,with plain, chamfered or rounded , mitred and rebated sash bars,any numbers, edges of framing plain, chamfered or rounded , fitted with cut and mitred with teak wood bidding of 2mm thick for securing glass, etc., sizes of members of shutters as specified, supplied and fitted to chowkhats , complete all as specified & directed in SSR Pt-I.
S&F powder coated (colour of coating as directed) aluminium (minimum 50 micron thickness of coating) of various section as required/suitable for doors, window & partion/Ventilator (sliding /or openable type) etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like jointing cleats, glazing clips, rubber neoprene packing. anodised aluminium snap beading screws etc. rubber beading, clips locking arrangement, handle, sealant etccomplete all as specified & directed in SSR Pt-I.
S&F powder coated aluminium grill (colour of coating as directed) (minimum 50 micron thickness of coating) with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 104, 7.5 mm thick,complete all as specified & directed.
M&L for preparation of newly wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer incl preparation of surfaces complete all as specified & directed.
S&F 3mm thick sheet glass froasted or obscured one side and glazing with new or old wooden beads/ aluminium beads in square complete all as specified & directed.
S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples complete all as specified & directed.
S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified & directed fixing with chromium plated screws.
S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified & directed fixing with chromium plated screws.
S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed complete all as specified & directed fixing with chromium plated screws.
S&F 150 mm size aluminium alloy handles, cast type anodised, ISI marked complete all as specified & directed fixing with chromium plated screws.
S&F butt hinges 100 mm stainless steel hinges medium weight and fixed complete all as specified & directed fixing with chromium plated screws.
S&F 150 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified & directed fixing with chromium plated screws.
M&L for MS Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, edges etc. also splays between floors and beams, etc. complete all as specified & directed.
M&L MS Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified & directed.
M&L MS Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified & directed.
M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in benching, coping, cills steps, parapets, railings up to 60cm in height, water troughs and the like rounded or chamfered on edges including necessary form work complete all as specified & directed.
M&L for Reinfoced cement concrete 1:1.5:3 type B-1 (20 mm graded stone agg) as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, copings, bed plates etc all as specified and directed .
M&L for Reinforced cement concrete type B1 (1:1.5:3) using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified & directed.
M&L for Reinforced cement concrete type B-1 (1 : 1.5 : 3) (20mm graded stone aggregate) (nominal mix)as in raft footings, bases for columns, plinth beams complete all as specified & directed.
M&L for Reinforced cement concrete type B-1 (1 : 1.5 : 3) (20mm graded stone aggregate) (nominal mix)as in column complete complete all as specified & directed.
M&L for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified & directed.
M&L for TMT Mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified & directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified & directed.
S&F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. confirming to Fe 410 -W (Gde -E 250 quality A), complete all as specified & directed.
S&F rolled sections as in main & cross beams, columns, hip and jack rafters , purlins where connected to common rafters and running rails,wind ties & any other places with angles cleats ot other connected plates confirming to Fe 410 -W (Gde-E-250) quality A, complete all as specified & directed.
S&F plates (plain or chequered ) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attahment, confirming to Fe 410 -W (Gde-E-250) quality A, complete all as specified & directed.
M & L for MS flat for hold fast. Conforming to Fe-310-0 or Fe-410-0, complete all as specified & directed.
S&F 1mm thick Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type , complete all as specified & directed.
Supply and fix Pre-painted Galvalume Aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.
Supply and fix Pre-painted Galvalume Aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall at 5th floor, fixed with self tapping screws complete all as specified & directed.
M&L for preparation of newly steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide incl preparation of surfaces complete all as specified & directed.
S&F 15mm bore steel water tubes, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified & directed.
S&F 20mm bore steel water tubes, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified & directed.
S&F 25mm bore steel water tubes, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified & directed.
S&F 20mm bore of dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified & directed.
S&F 15mm fancy type chromoum plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified & directed.
S & F 15mm dia stop valve /angle valve fancy type chromium plated screwed down, high presure with butterfly handle screwed both ends for pipe and fixed to pipe of 15mm dia bore complete all as specified and as directed.
S&F brass chromium plated shower rose 125mm size, including fixed to steel tube, complete all as specified & directed.
M&L 75mm cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) including complete all as specified and as directed.
S&F 75mm bore of sand cast Cast iron soil/ waste pipe in any length with ears and jointed with cement joints, laid in trenches in floors/ fixed to wall complete all as specified & directed..
S&F 100 mm bore of sand cast Cast iron soil waste pipe in any length with ears and jointed with cement joints, laid in trenches in floors/ fixed to wall complete all as specified & directed.
S&F 100mm CI ‘P’ or ‘S’ Traps jointed with neat cement paste fixed to wall or roof at any floor/ any height/ any location including all fittings complete all as specified and as directed .
S&F 100mm CI bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified & directed.
S&F 75mm CI bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified & directed.
S&F 100mm bore CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified & directed.
S&F 75mm bore CI Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified & directed.
S&F for 200mm bore RCC pipe class NP-2 laid and jointed complete with collers as specified including testing all as specified and directed.
M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in bed to drain pipes including forming cradle after they are laid and tested for 200mm bore RCC pipe complete all as specified & directed.
Cutting into existing manholes for connecting new drain making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 Sec) in cement concrete 1:2;4 type B1 smooth finished and reforming benching as reqd for 200mm bore of pipe complete all as specified & directed.
M&L, Extra for forming fair finished drain or channel 200mm inner girth in cement concrete, using extra cement, including forms, moulds, mi-tred/stopped ends etc. complete all as specified & directed.
M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified & directed.
M&L for machine cut cudappa stone slab 20-25 mm thick laid over 20mm thick screed base in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed.
M&L 16 to 20 mm thick Granite (of any type) work (table rubbed and polished) (colour of granite as approved by GE) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over and including 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding and rounding complete all as specified & directed.
M&L for false ceiling made ofsnap grid 600x600 & 6 mm thick ceiliing board / tiles deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50x40x0.63mm and cross tee of size 23.50x23.50x0.63mm and angle size 19x19x0.63mm including 3mm GI wire for suspending bolts necessary washers nut/clits/pin hook etc. for securing frame work to ceiling to the snap grid including provn of necessary holes / cuttings for providing light/fan as required including making necessary recesses / projected pattern complete all as specified and as directed by Engr in Charge. (Make -Armstrong/Chanakya/Everest) complete all as specified & directed.
Removal of excavated soils from site to distance exc1.50 Km but not exc 5 Km outside MD land and depositing where directed, complete all as specified & directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in Hard / dense soil, complete all as specified & directed.
S&F moulded polythylene water storage tripple layer loft tank tank of 300 ltr capacity hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grms ) all as specified in SSR Part I complete all as specified & directed.
S&F 3000 lit capacity rotational moulded polyethylene water storage tanks (cylindrical, vertical with closed top) hoisted and fixed in position, including 25 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grms ) complete all as specified and directed.
S&F in repairs PVC modular section 20mm thick as in profile including 'C' channels, aluminium all around the profile complete all as specified & directed.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings complete all as specified & directed.
S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified & directed.
S&F Vitreous China wash basin, white, flat back, size 550 x 400mm including brackets or fixing with bolts in wall , including 15mm bore fancy pillar tap, waste coupling, waste pipe,complete all as specified & directed.
M&L Vitreous water closet (Squatting pan, Orissa pattern, size 580 x 440 white, with integral foot rests and 'P' trap (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified & directed.
S&F Vitreous China wash down water closet pan, white (excluding fixing bolts, flushing cistern and flush pipe) with seat cover,complete all as specified and as directed.
S&F Vitreous China urinal, Half stall type white , complete all as specified & directed.
S&F 10 ltr capaciaty PVC low level flushing cistern 10 litre capacity with 32mm bore polythene flush pipe of sufficient lenght including internal fitting (valve less syphonic) etc. including joint between flushing pipe and socket of WC ,complete all as specified & directed.
S&F in aluminium anodised tubular towel rail 20mm dia 600mm long including necessary aluminium brackets complete all as specified and as directed.
S&F PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and as directed.
S&F Flush pipe of Polyethylene of low or high density or PVC 32 mm dia. for low level cistern complete all as specified and as directed.
S&F Cast iron work grade FG 150, machined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles machined each exceeding 5 Kg by weight complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and directed.
Supply, install, testing and commissioning of LT Panel (meter cabin panel ) mounted on angle iron frame 40x40x5 mm grouted on floor,cubical indoor type for 415V, 3 phase, made of 2 mm thick CRCA sheet weather, vermin proof factroy fabricated, CPRI approved, front side open, hinged door with locking arrangement powder coated, individual compartment for MCCBs and 400 Amps rated bus bar, top and bottom cable entry including disconnecting cable connections and electronic meters from old meter cabin panel and fixing/connecting in new insalled panel with provisions of thimble/lugs and necessary farmwork and PCC foundation in PCC 1:2:4 B-1 type using 20mm graded agreegate including shifting of existing panel if any making arrengement for fixing of panel and making good to disturbed surface as directed comprising of the following :-
(a) MCCB, FP, 250 Amps 25 kA- 02 Nos. Make-Legrand / Schneider / L&T
(b) MCB SPN 63 Amps, 10KA, C series - 16 No Make-Legrand/ Schneider / L&T
(c) Sheet metal enclosure 2 way without bus bar - 16 No Make-Legrand/ Schneider / L&T
(d) Copper Bus bar, 400 Amps Rated - R,Y,B & N
(e) Digital Ammeter-01 No, Make-HPL, SP CL-1.0/AE
(f) Digital Voltmeter-01 No Make-HPL, SP CL-1.0/AE
(g) Phase indicator lamp R,Y & B
(h) Making provision for fixing of digital electronic meters removed from old panel including fixing and providing vision glasses - 16 Nos.
(j) Material and labour for 2 core 10 Sqmm multistranded copper conductor cable 1100V form bus bar to electronic energy meters using suitable size copper thimbles/glads.
(k) Fixing of submain cable 2 core 10 Sqmm copper conductor with outgoing of energy meter all as directed.
Supply, install, testing and commissioning of LT panel (meter cabin panel) mounted on angle iron frame 40x40x5 mm grouted on floor,cubical indoor type for 415V, 3 phase, made of 2 mm thick CRCA sheet weather, vermin proof factroy fabricated, CPRI approved, front open hinged door with locking arrangement powder coated, individual compartment for MCCBs and 300 Amps rated bus bar, top and bottom cable entry including disconnecting cable connections and electronic meters from old meter cabin panel and fixing/connecting in new insalled panel with provisions of thimble/lugs and necessary farmwork and PCC foundation in PCC 1:2:4 B-1 type using 20mm graded agreegate including shifting of existing panel if any making arrengement for fixing of panel and making good to disturbed surface as directed comprising of the following :-
(a) MCCB, FP, 200 Amps 25 kA- 02 Nos. Make-Legrand / Schneider / L&T
(b) MCB SPN 63 Amps, 10KA, C series - 12 No . Make-Legrand / Schneider / L&T
(c) Sheet metal enclosure 2 way without bus bar - 12 No Make-Legrand / Schneider / L&T
(d ) Copper Bus bar, 400 Amps Rated - R,Y,B & N
(e) Digital Ammeter-01 No, Make-HPL ,SP CL-1.0/AE
(f) Digital Voltmeter-01 No Make-HPL ,SP CL-1.0/AE
(g) Phase indicator lamp R,Y & B
(h) Making provision for fixing of digital electronic meters removed from old panel including fixing and providing vision glasses - 10 Nos.
(j) Material and labour for 2 core 10 Sqmm multistranded copper conductor cable 1100V form bus bar to electronic energy meters using suitable size copper thimbles/glads.
(k) Fixing of submain cable 2 core 10 Sqmm copper conductor with outgoing of energy meter all as directed.
Supply and fix submain wiring in repair 2 nos single core FRLS unsheathed 1100 volts grade cable with stranded copper conductor of size 10 Sqmm in and including PVC casing caping including 1 single core cable with stranded copper conductor of size 10 sqmm (green colour) for earthing. Note :- (i) Two runs of 10 Sqmm cable, 1 run of PVC casing caping and 1 run of 10 Sqmm cable shall be measured as 1 RM. (ii) Each submain wiring shall run in seperate PVC casing caping. Make of wire - Polycab / Finolex / Havells Make of casing caping - Pressfit / Precision
M & L for repair / replacement of Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit /pipe or fixed to poles or any other indicated situation for loop earthing etc. as required GI Strip 25 x 4 mm complete all as specified and directed by Engineer-in-Charge.
M&L for Earthing with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, burried directely in ground (earth pit not less than 2.5 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to galvanised iron strip 32 x 6 mm with the help of bolts, nuts, check nuts and washers of galvanised iron or steel, including necessary excavation, PCC 1:3:4 type B1 weatering arrangement with GI pipe funnel, jali, complete all as specified and shown in electrical plate No.3 including connection to the earthing test point and testing on completion.
Supply, installation, commissioning of Refrigerator having steel material with inbuilt stablizer, frost free, standard double door type, free-standing, colour as per choice with toughened glass shelf, green fridge having storage capacity of 360 Ltrs , electric driven single phase , complete all as specified and as directed. Make :- LG / Samsung / Haier / Daikin/ Bluestar
Supply, Installation, commissioning of deep freezer (3 Star) corossion resistance (UV grade plastic material) durable body, energy efficient compressor, environment friendly CFC free insulation, glass top up to 320 ltr capacity having double door, all as specified & directed by engineer-in-charge. Make :- Voltas, Blue Star, LG, Samsung
Supply, installation, commissioning,Hi wall split inverter air conditioner electric driven single phase comprising indoor and out door units of capacity 1.5 TR complete with cordless remote (5 Star) control unit rating of ISEER-5 & above. Compressor type, rotary, refrigerant including copper pipes with insulation, copper armoured cables for connection of indoor and out door unit upto 6 mtrs length and PVC drain pipe of size 15mm upto 6 mtrs complete all as specified and as directed. Make :- Voltas/ Hitachi / Blue star , Carrior Note :- Copper pipe with insulation upto 6 mtr including cable for connections and drain pipe upto 10 mtr are inclusive of rate quoted.
M&L for MS bracket decorating to capacity of AC for fixing of outdoor unit of split AC with all fixtures and fittings,
M&L for copper pipe 25mm dia with insulation for fixing of AC indoor unit to outdoor unit of 1.5 ton cap with as per OEM secefications complete all as directed all fixtures and fittings, making good disturbed arae etc all necessary fixtures and fittings complete all as specefied and directed
Supply installation commissioning of water cooler fully stainless steel electric driven single phase having approx storae 80 ltrs and norinal cooling cap 40 ltr per hours complet all as specified and directed.
S&F,install, Testing , commissioning of electric chimney with push button control , baffle filter, PCDA / FRP housing, LED lights with power ful italian motor with top of size 900 mm along with 1250 cum per hr suction power with rated capacity incl all necessary fixtures and fittings complete all as specefied and directed. Make: GLEN model no CH6055SS or equalent make approved by GE.
S&F,install, Testing , commissioning of electric chimney with push button control , baffle filter, PCDA / FRP housing, LED lights with power ful italian motor with top of size 600 mm along with 1250 cum per hr suction power with rated capacity incl all necessary fixtures and fittings complete all as specefied and directed. Make: GLEN model No CH6055SS or equalent make approved by GE.
Supply and errect factory fabricated rectangular square duct made out of 24 gauge GI sheet in L shaped hollow profile including all accessories such as corner, carriage bolt hangers, gasket and seal the longitudinal joints with and including approved sealant complete all as specified and directed by Engineer-in-Charge.
M & L of MS steel works for clamping , Angle iron supports, staging , clamps nut and bolts as required at site with welding , jointing , and fixing on walls as required shape /length all as spedcified and directed
M & L for Point wiring complete with 1.5 sqmm single core multistranded FRLS PVC insulated sheathed copper conductors 1100 volts grade drawn through & including PVC non-metallic casing and caping / conduit of size not less than 25mm width, I ISI marked with accessories concealed in wall/ceiling/truss including cutting chases, pinning in etc with PVC non metallic ISI marked terminal boxes concealed wall including one FRLS PVC insulated & sheathed multistranded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly for the following :- Make of cable: Plaza/ Havelles/Finolex. Make of PVC conduit : Finolex/ Precision/ Plaza
(a) One light point controlled by one switch SP one way.
(b) One ceiling fan point controlled with one 5A switch
(c) One exhaust fan / wall fan point controlled with one 5A switch
(d) One 3 pin socket outlet 5Amps on independant board.
(e) One 3 pin socket outlet 5Amps on same board with other switches.
Material and Labour point wiring for 15 / Amps socket complete with 2.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic casing and caping / Concealed conduit of size not less than 20 / 25 mm dia including PVC bend, tee joints etc as per site requirement, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes / modular boxes surfacing on wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 2.5 sqmm as earth continuity conductor connected to common earth as earth dolly.
S&F Plug and Socket enclosure, in sheet metal enclosure with MCB, SP 20 Amps 240 Volts complete with metal clad socket for window type air conditioners. Make : Siemens Cat-8GB0501RC or equivalent in GE/ Legrand.
S&F Modular Switch , 6Amp, One way, 1 module, ISI marked Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (NIXON).
S&F Modular Socket , 6 Amps, 2/3 pin combined 3 module, ISI marked. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (NIXON).
S&F Modular Switch , 15Amp, One way, 1 module, ISI marked Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (NIXON).
S&F Modular Socket , 16Amps, 6 pin combined 3 module, ISI marked. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (NIXON).
S&F Modular type, electronic fan regulator ( 5 step ), 120 Watts, 230 volts, 2 module, ISI marked. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (NIXON).
S&F ceiling rose surface bakelite with ISI mark, flush type with ISI mark three terminals complete all as specified and directed. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (NIXON).
S&F Modular white cover plate with Frame 2 Module, ISI marked. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)
S&F Modular white cover plate with Frame 3 Module, ISI marked. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)
S&F Modular white cover plate with Frame 4 Module, ISI marked. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)
S&F Modular white cover plate with Frame 6 Module, ISI marked. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)
S&F Modular white cover plate with Frame 8 Module, ISI marked. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)
S&F Modular white cover plate with Frame 10/12 Module. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)
S&F Modular metal flush box 1/2 module ISI marked and incluing cutting hole in wall / ceiling/piller etc and making good surface. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)
S&F Modular metal flush box 3 module, ISI marked and incluing cutting hole in wall / ceiling/piller etc and making good surface.
S&F Modular metal flush box 4 module, ISI marked and incluing cutting hole in wall / ceiling/piller etc and making good surface. Make :
S&F Modular metal flush box 6 module, ISI marked and incluing cutting hole in wall / ceiling/piller etc and making good surface.
S&F Modular metal flush box 8 module , ISI marked and incluing cutting hole in wall / ceiling/piller etc and making good surface.
S&F Modular metal flush box 10/12 module , ISI marked and incluing cutting hole in wall / ceiling/piller etc and making good surface.
S&F baton integral sleek extruded polycarbonate LED channel with white acrylic cover of 1x18WH with accessories internally prewired and incl connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make : Havells/Philips/Jaquar
S&F baton integral sleek extruded polycarbonate LED channel with white acrylic cover of 2 feet, 1x10 WH with accessories internall prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed . Make: Havells/Philips/Jaquar
M&L for Lamp holder, PVC/ Polycarbonate type with cord grip cap suitable for pendant fittings complete all as directed by engr-in-charge.
S&F 12 way Double door type having protection IP-42, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed of comprising of the following :- Make: ABB, Siemens or equivalent in GE/ Legrand /Havells
M & L for GI pipe light grade for hanging of ceiling fan upto 02 Metrers incl clamps and nut bolts, paining etc incl all necessary arrangements ,all fixtures as directed complete all as spefied.
Suplly & fixing of ceiling Fan 1200mm sweep with minimum Air delivery 230cmm, AC 230 volts with blades, downrods with all accessories complete all as specified and directed.
S&F TPN 4 way Double door type having protection IP-42, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed of comprising of the following :- Make: ABB, Siemens or equivalent in GE/ Legrand /Havells
S & F , MCB TPN 32 AMP, 10 KA , 415 VOLTSratingcomplete all as specified and directed. make Siemens or equivalent in GE/Legrand
S & F , MCB TPN 63 AMP, 10 KA , 415 VOLT Srating complete all as specified and directed. make Siemens or equivalent in GE/Legrand
Supply and fixing exhaust fan , steel body AC single phase, 230 volt of size 300 mm sweep with blades, and frame and louvers incl cutting of walls as rated size as directed and making good the existing surface etc all as specefied and directed.
S & F GI Tube medium grade dia 40 mm dia concealed to walls for making water connection from main line to UG sump all as specified and directed. Make Jindal/Tata
Supply and fixing in replacement 40 mm of gun metal globe or gate valves, with iron whel head, screwed both endes for iron pipe. Make : Zolota / Leader / HM
All as per srl item No 153. above here in before but of 25 mm dia
Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10sq mm 3 core. laid in duct / along pole/wall etc including making connection complete all as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.
Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 3 core. laid in duct / along pole/wall etc including making connection complete all as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.
Supply and fixing Submain wiring with proper colour coding, 2 single core FRLS 1100 volts grade cable with stranded copper conductor of size 6 Sqmm in and including PVC casing and caping, ISI marked including 1 single core cable with stranded copper conductor of size 6 Sqmm (green colour) for earthing. Make of cable: Plaza/ Havelles/ Finolex. Make of PVC Casing caping : Finolex/ Precision/ Plaza. Note : 2 runs of 6 Sqmm cable, 1 run of PVC casing and caping and 1 run of 6 Sqmm cable shall be measured as 1 Run.
Supply and fixing Submain wiring with proper colour coding, 2 single core FRLS 1100 volts grade cable with stranded copper conductor of size 4 Sqmm in and including PVC casing and caping, ISI marked including 1 single core cable with stranded copper conductor of size 4 Sqmm (green colour) for earthing. Make of cable: Plaza/ Havelles/ Finolex. Make of PVC Casing caping : Finolex/ Precision/ Plaza. Note : 2 runs of 4 Sqmm cable, 1 run of PVC casing and caping and 1 run of 4 Sqmm cable shall be measured as 1 Run.
Supply and lay in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120 sq mm 3.5 core. laid in duct / along pole/wall including making connection complete all as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it.
S&F 12 way Double door type having protection IP-42, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed of comprising of the following :- Make: ABB, Siemens or equivalent in GE/ Legrand /Havells
S&F MCB, DB, SPN 8 way double door with protection type IP-42 with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as specified and directed. make Siemens or equivalent in GE/ Legrand
S & F , MCB SPN 40 to 63 Amps, 10 KA ratingcomplete all as specified and directed. make Siemens or equivalent in GE/Legrand
S & F , MCB SP 6-32 Amps, 10 KA rating complete all as specified and directed.
Taking down old unserviceable fitting. S&F of New LED Bldg security light 45 Watt indus series powder coated pressure die cast aluminium high power LED bldg security light with heat resistant toughned glass with lens with IP66 Protection including 20 mm to 40 mm dia pipe bracket , complete all as specified and directed by Engineer-in-Charge.Make- Philips / Jaquar / Havells /
Supply and fixing exhaust fan , steel body AC single phase, 230 volt of size 380 mm sweep with blades, and frame and louvers incl cutting of walls as rated size as directed and making good the existing surface etc all as specefied and directed.
Supply and fixing Ceiling light 36 Watt 2 ft X 2 ft Recess/ surface mounting led ultra slimceiling light with extruded aluminium housing and milky diffuser.LED ultra slim panel:CYGNUS SERIES.Make- Havells/ C&S /Phillips
SN CONSTRUCTION
SHREE JAGDISH FURNITURE CO.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .