PROVN OF ONE STORE SHELTER AND WATCH TOWER AND ALLIED SERVICES AT NLP MIL STN

Amount

Design and Details drg of Architectual & structural drawings for store shelter (25.00m x 12.00m) with RCC framed structure, roofing with steel struss & galvolume sheet as per tentative plan attached for general idea with following parameters:- (a) Concrete Grade-M25: (b) Reinforcment steel- Fe 500D: (c) Seismic Zone -V: Note:- Design and details drg to be vetted from any Govt Engg College. complete all as specifed and directed. Soil investigation report is enclosed for design purpose.

Surface dressing not exc 15 cm deep in soft/loose soil complete all as specified and as directed.

Excavation in trenches n.exc 1.5m deep & n.exc 1.5m wide and n. exc 10 sqm on plan, in soft/loose soil and getting out complete all as specified and as directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation ,filling mass complete all as specified & directed.

M&L for RCC design mix M-25 using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams, bases for columns, etc. basement slabs, under reamed piles and mass concrete complete all as specified and as directed.

M&L for RCC design mix M-25 using 20mm graded stone aggregate as in columns, pillars, piers, posts etc.complete all as specified & directed.

M&L for design mix M-25 using 20mm graded stone aggregate as in roof beams, lintel bands, cantilevers, bressumers, lintel over 1.5mtr span.complete all as specified & directed.

M&L for RCC type B1 (1:2:4) 20mm graded stone aggregate as in chajjas.complete all as specified & directed.

M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 40mm thick in Damp Proof Courses to Horizontal or Vertical Surfaces including mixing WPC and Use & Waste of Formwork and Applying evenly a coat of Blown type Bitumen @ 1.50 KG/SQM and blinding with Clean Dry Sand @ 0.05 CUM/SQM, complete all as specified and as directed. NOTE : Water Proofing Compound (WPC) shall be Measured and Paid for separately under appropriate Item.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or batter complete all as specified & directed.

M& L Formwork to sides of colums, pillars, posts etc. complete all as specified & directed.

Formwork to sides and soffits of floor or roof beams, lintel bands, beam haunchings, girders, lintels, cantilevers shelves including sup- ports,etc complete all as specified & directed.

Formwork to sides and soffits of Chajjas etc complete all as specified & directed.

M&L for TMT bars 10mm dia and over as reinforcement, cut to length, bent to shape required,including cranking, binding, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

M&L for TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking bending hooking ends spirally and binding as in stirrups, spacers and binders etc complete all as specified & directed.

M&L precast cement concrete block masonry with solid block, type C-1,1:3:6 mix ( using 20mm graded aggregate ), exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed.

Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in soft/loose soi lcomplete all as specified & directed.

Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified & directed.

M&L for sand filling under floors or in foundations, spreading and levelling etc complete all as specified.

M & L hardcore of broken stone boulsers of gauge n.exc. 63mm,deposited,spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface complete all as specified & directed.

M & L for 100mm thick PCC 1:4:8 type D-2 as in sub base, Floors, Paving, finished even and fair complete all as specified complete all as specified & directed.

M&L 25mm th PCC 1:2:4 type B-1 using 20mm graded aggregate as in flooring, finished even and smooth without using extra cement complete all as specified & directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over 15mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as spd & directed.

M&L for Machine cut kota stone slab in skirting 18-20mm thick over 10mm thick cement screed base in CM 1:3 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as spd & directed.

M&L 75mm th PCC 1:2:4 type B-2 using 40mm graded aggregate as in Plinth Protection, finished even and smooth without using extra cement complete all as specified.

S&F plastic dividing strips, 3mm thick 38 mm with inserted in position to confirm to design complete all as specified & directed.

M&L Rendering (Internal) 10mm thick in Cement Mortar 1:6 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Even and Smooth without Using Extra Cement, complete all as specified and as directed.

M&L Rendering (External) 15mm thick on Brick/PCC Blocks or Concrete Works consisting in 2 layers, Backing/Under layer of 10mm thick in Cement Mortar 1:4 and Float/ Top layer 5.0mm thick in Cement Mortar 1:4 including mixing WPC to Float/ Top layer, finished Fair and Even, complete all as specified and as directed. Note: WPC will be measured & paid separately

Supply only Water Proofing Compound (as approved), conforming to IS:2645-2003, complete all as specified and as directed.

M&L Preparing New Plastered Surfaces of Walls and applying Two Coats of Distemper Oil Emulsion (as approved) over a Coat of Chalk Whitening (Priming Coat), complete all as specified and as directed.

M&L Preparing New Plastered Surfaces of Walls and applying Two Coats of Cement Base Paint (as approved Tint) over a Coat of Alkali Resistant Priming Paint, complete all as specified and as directed.

S&F Aluminum anodised Snap Grid Frame Work of size 605x605mm in False Ceiling with and including Hangers 4.0mm dia GI (upto 1200mm length) for adjusting Level, fixed to Roof Slabs by means of Ceilling Cleats made out of GI Flat 40x3.0mm in size, 60mm long and Expansion Hold Fasteners 12.5mm dia, 40mm long, complete all as specified and as directed.

S&F HSPC Non-Asbestos Fibre Cement Building Boards Decorative Type4.0mm thick, fixed or laid/ inserted to Aluminum Snap Grid Frame Work with Screws, complete all as specified and as directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Ridges/ Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed.

S&F Steel work in (sqare/ Rectangle) tubular trusses, rafter, purlins, post etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming toFe 410 -W (Gde- E- 250) quality- A complete all as specified and as directed by the Engineer-in-Charge.

S&F mild steel work plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment quality confirming to Fe-290-Gde-E-165 complete all as specified and as directed by the Engineer-in-Charge.

S&F 20mm dia Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 22.5cm but n exc 30cm long complete all as directed.

M&L Cutting Holes in Brick Walls, not exc. Half Brick thick, built in Cement Mortar for inserting of Holdfasts, Lugs, etc. and Making Good to dismantled portion with Cement Concrete 1:2:4 (20mm graded stone aggregate) or Cement Mortar 1:3 (as required) and adjoining Surfaces in Cement Mortar 1:4, complete all as specified and as directed.

M& L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe- 290 (Gde E- 165) complete all as specified and as directed.

M & L for 1mm thick Mild steel, plain, black sheet in hearths ; covering to door shutters; covering to door chowkhats ( frames); chullah hoods ; water tanks; water troughs; ducts;urinal troughs and funnels, etc. cut to size , edges beaded if directed, holes punched; including round headed screws , clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams, including bending, turning up, mitred angles, stopped ends, outlets , etc. as required, complete all as specified and directed by the Engr-in-Charge.

M & L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 ® complete all as specified and as directed.

M & L 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 100 mm size stainless steel butt hinges medium weight cold rolled fixed/ welded to frame complete all as directed.

S&F 150 mm long,aluminium,anodised, barrel tower bolts of extruded section all as directed.

S&F 150 mm aluminium handles, cast type anodised complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tounge, anodised with hard drawn spring fixed in floor, overall length of cover plate 150 mm all as specified and directed.

S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed. .

S & F Powder coated aluminium sections (minimum 50 micron) of approved colour as in door, window, ventilator frames, partitions with one or more rebates and door, windows shutters sliding/openable type/ventilator shutter including provision of necessary jointing cleats, glazing clips, neoprene rubber packing, powder coated aluminium snap beading, screws inclding provision of suitable size of powder coated aluminium fittings such as locking arangements, handles, stainless steel fiction hinges and tower bolts etc including fixing only glass panels/particle board panels/wire gauge/aluminium grill etc complete all as specified and directed. (Note : (i) The size of aluminium sections shall be all as specified in relevant IS Code and MES Schedule Part-I (ii) Glass panels/ Wire gauge etc shall be measured paid seperately as supply only rates under respective items here-in-below).

M&L applying two coats of synthetic enamel paint over a coat of primer to steel surfaces over a coat of red oxide primer including preparation of surfaces, exc 10 cm width or girth, complete all as specified.

M&L applying two coats of synthetic enamel paint over a coat of pink primer to wooden surfaces surfaces including preparation of surfaces, exc 10 cm width or girth, complete all as specified.

S & F Sheet glass 3mm thick, ordinary quality and glazing with oil putty or wooden beads exceeding 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and directed.

M&L Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed.

M&L Stainless Steel Drapory Rod having 24mm Outer dia and 1.0mm Wall thickness including Brackets, Side Holders and Rings, etc. complete all as specified and as directed.

Excavating over areas, n exc 1.5 m deep and getting out of soft/loose soil complete all as specified and as directed.

S & F compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates confirming to Fe-410-W(Gde-E-250) quality-A, etc complete all as specified and directed.

S & F Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. Fe-410-W(Gde-E-250) quality-A, etc complete all as specified and directed

S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410-W(Gde-E-250) quality-A, etc complete all as specified and directed.

M&L for Plinth protection 75 mm thick in PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) laid in alternate bays(not exc 2 Sqm each) finished even and fair at top using extra cement and providing joints throughout the thickness of plinth protection, filled with mastic filling comprising one part of bitumen 85/25 graded and three parts of sand by weight complete all as specified and as directed.

M & L for point wiring with 1.5 Sqmm PVC insulated unsheathed 1100 Volts grade multi stranded copper conductor FRLS cable in PVC casing capping (ISI Marked) (Approx size 20/25/40mm width) along with all fitting/ fixtures as Tee, Bend Elbow socket, Saddles etc. complete with PVC board/ box suitable size / shaped for and accommodating switches sockets, regulators in white / ivory/ off white colour and with 1.50 Sqmm PVC insulated copper conductor stranded as earth wire connecting to earth dolly for one light/fan/bell point controlled by one switch 5 Amps all as directed and specified.

All as per item No. 60 here-in-above but one 3/5 pin socket 5 Amps on the same board with other switches with cables 1.5 sqmm size.

All as per item No. 60 here-in-above, but one 3/5 pin socket 5 Amps, independent, with cables 1.5 sqmm size.

All as per item No 60 here-in-before but for multi pin socket outlet 15 Amps, independent with 2.50 Sqmm single core PVC insulated unsheathed 1100 Volts grade multi stranded copper conductor FRLS cable complete with 2.50 Sqmm stranded copper conductor PVC insulated unsheathed earth wire and connecting to earth dolly complete all as directed.

S&F socket outlet 5 pin, 5 Amps, 230 Volts AC flush type, including necessary connection complete all as specified.

Supply and fixing switch piano flush button 5 Amp single pole one way 230 volts complete all as directed.

Supply and fixing switch socket combination flush type multi pin, 16 Amps, 230V, AC complete all as directed.

S & F ceiling rose surface type bakelite 65x50 mm two to three terminal suitable for 230 Volts AC 6 Amps, complete all as specified and as directed.

S & F energy saving recessed LED flat panel 600mm x 600mm 35/36 watt (3000k to 6000k) with high efficiency PMMA diffuser soft glare free light complete with driver, holder, LED lamps suitable for ceiling complete all as directed.

Supply and fix 20 Watt wall mounted LED Tube light fitting with aluminium housing & integrated electronic driver along with fixtures complete all as directed.

Supply and fixing 10 watt LED Bulk head light fitting complete all as specified and as directed..

S&F LED Street Light Fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. MAKE : BAJAJ/ CG/ C&S/ HAVELLS/ PHILIPS

Supply and fix 1200mm sweep ceiling fans, complete with three blade, down rod, accessories 230V, with Squirrel cage induction motor etc complete all as specified and as directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required complete all as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 380/400 mm sweep with, blades, and frame and louvers all as specified and directed

M & L for submain wiring with two run single core PVC insulated unsheathed cable 1100 volts, grade having stranded copper conductor of 6 sqmm nominal cross sectional area FRLS drawn through PVC casing and capping including one run of single core PVC insulated unsheathed copper conductor of size 6 Sqmm for earth continuity conductor connected to earth dolly complete all as specified and as directed.

S & F MCB distribution board, TPN 4 way, 415 Volts AC, double door type of sheet steel phosphotised powder painted with 200 Amps, neutral bars, earth bar all as specified and directed.

Supply & fix MCB TPN/FP 32 Amps 10 KA,"C" series complete with connection, testing and commissioning complete all as directed.

Supply and fix MCB single pole 240 volts, 6 to 32 amps, 50HZ, 10 KA. , ‘C’ series all as specified and directed.

S&F PVC rectangular block for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet cover of size 100mm x 100mm x 50 mm deep all as specified and directed

S&F PVC rectangular block for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet cover of size 250mm x 200mm x 50 mm deep all as specified and directed .

M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to earth lead wire of GI wire 4 mm dia by means of nuts/bolts and washers, check nuts of galvanized iron or steel including 15mm dia GI pipe light grade upto 1.5 mtr below GL for protection pipe, 20 mm dia GI pipe (Medium grade) for watering, necessary earth work. PCC 1:3:6 type C1 concrete pit, RCC (1:1.5:3) type A1 pre-cast cover (54X54X5 cm) duly reinforced with and incl 8 mm dia TMT bar @ 150 mm c/c both ways, one lifting handle made of 8 mm dia TMT bar, embedded in pre-cast cover slab all as specified and shown in electrical plate No-3 of SSR Part-I including testing on completion complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 Volts grade heavy duty XLPE cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armored with galvanized steel wire or tape and over all PVC sheathed 10 Sq mm 4 core nominal cross section stranded conductor complete all as specified and directed by Engr-In-Charge

Supply and laying or fixing or passing through pipe, 1100 Volts grade heavy duty XLPE cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armored with galvanized steel wire or tape and over all PVC sheathed 10 Sq mm 2 core nominal cross section stranded conductor complete all as specified and directed by Engr-In-Charge

M&L for dry sand cushioning to underground cables with 8 CM thick before laying of cables and 15CM thick after laying and stretching of cable all a specified.

M&L for sub class 'B' brick for covering to under ground cable laid dry flat transversally width equal to the length of the cable all as specified and directed. (230 x 115x 75 mm)

Supply and fix steel tubular swaged poles type 410-SP-31(9.0 meter long) Swan Neck Type complete with CI base plate and finial and single swan neck, Including foundation and coping

Supply and fix LED street light 60 Watt, 230 Volts, AC outdoor type, with high pressure die cast aluminium hosting and heat rrsistant complete with driver, lamp bracket with impact and corrosion resiatant including thermal management in multiple opticals with IP 65/66 protection complete all as specified and as directed.

M&L Plain cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation or in any situation complete all as specified and as directed.

M&L Plain cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in coping of pole or in any situation complete all as specified and as directed.

S&F Shock Proof, Rust Proof, Fire Retradrant, Non-transparent Kiosks Pole Box of size 310x210x120mm made of Engineering Plastic on Piece moulding for Outdoor type, Heavy duty with 4 No. insulated Alunminium Bus-bar of 60 Amp capacity, mounted on Unbreakable Insulators MCB SP, 10 Amp, complete with Aluminium Lugs of suitable size upto 50 Sqmm including 2 No. Flat Iron 40x3mm Clamps with suitable size Mild Steel Bolts, Nuts & Washers, etc. and duly Painted on Both Sides with Two Coats of Synthetic Enemel Paint over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed.

M&L for Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less' than 1.5 metres below normal ground level, connected to galvanised strip of size 32 x 6 mm earth continuity coductor by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion or any other equipment with provision of GI pipe light grade etc allas specified and directed including testing on completion including PCC pit and RCC cover funnel with wire mesh all as specified and directed.

M&L for PVC Flat twin core cable with 2.5 sqmm (nominal cross-sectional area) FRLS PVC insulated and sheathed 1100 volts grade multistranded copper conductor cable drawn through and including steel conduit of 20 mm dia medium grade from street light junction/ terminal box to street light fitting including clamps suitable size for fixing the PVC conduit with street light poles complete all as directed.

M&L for air termination single pointed aluminium rod of 12 mm dia and 300 mm long mounted on GI pipe complete all as specified and directed.

M&L for test point termination block made of gunmetal or phosphorus bronze size 75mm x 75mm x 25mm drilled and screwed including 3 Nos 8 mm dia 25 mm long hex head screws complete all as specified and directed.

M&L for aluminium strip 25mm x 3.15 mm with PVC saddle and fixing screws etc for roof conductors and down conductors above ground complete all as specified and directed.

M&L for GI Strip 32mm x 6mm with saddle and fixing screws etc from test terminal block to earth pit complete all as specified and directed.

M&L for sub main wiring with 2 x 4 Sqmm & 1 x 4 Sqmm FR PVC insulated copper conductor single core cable laid in trenches or recease in PVA casing capping including all necessary fitting accessories complete all as specified and directed.

S&F switch piano, flush type, single pole one way 5/6 Amp complete all as specified and directed.

S&F Switch Socket combination, flush type 2 in 1, 3 pin, 5 Amps flush type universal complete all as specified and directed.

S&F Socket outlet flush type 2 in 1, 3 pin, 5 Amps flush type universal complete all as specified and directed.

S&F Ceiling Rose, PVC/polycarbonate, isolated body 3 terminal complete all as specified and directed.

S&F LED Tube Light Fitting 1 x 20 Watt, 220 Volts, AC decorative box type with driver, holder incl LED tube light connecting up with 3 core flexible copper conductor cable of suitable size from ceiling rose complete all as

S&F LED light fitting 1x9/10 Watt Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

M&L for wall mounted osclilating fan 450mm sweep, 230 Volt, steel body, complete with all accessories (BEE 5 star rated air boll hi speed) complete all as specified and directed.

M&L for 70 Wall LED flood light, 230 Volt outdoor type with thermal management in multipul optics and equipped with IP-66 protection with impact & corrison resistant complete with driver and lamp with 10 KV in-built Surge protection device, electrically connecting up with and including suitable size & length PVC flexible twisted copper wire, 3 core complete all as specified and directed.

M&L for MCB distribution board, SPN, 4 way, 240 Volts AC, double door type of sheet steel pgosphortised power painted complete all as specified and directed.

S&F MCB SPN, 240 volts, 32 to 40 Amps, type C, 10 kA, 50 Hz complete all as specified and directed.

S&F MCB SP, 240 Volts, 6-32 Amps, 10 kA, 'C' Curve, 50 Hz complete all as specified and directed.

M&L for 10 Sqmm twin core flat or circular cable, 1100 Volts grade heavy duty aluminium conductor PVC insulated, served with inner sheathing of PVC tape and overall PVC sheathed cable as in service connection suspended by insurting hangers not more than 1m apart including 4mm suspension wire complete all as specified and directed.

M&L for Air termination, single pointed aluminium rod 12mm dia and 300mm long mounted on GI pipe complete all as specified and directed.

M&L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex headed screw complete all as specified and directed.

M&L for Aluminium strip 25 x 3.15mm with PVC saddles and fixing screws etc. for roof conductors and down conductors above ground complete all as specified and directed.

M&L for Galvanised iron strip 32 x 6mm with saddle and fixing screws etc. from test terminal block to earth pit complete all as specified and directed.

M&L for 25mm dia GI tube liggt grade laid in floor or trenches complete all as specified and directed.

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity as shown.

S & F Voltage stabilizer for automatic operation, air cooled indoor type & designed for input variation between up to 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4 KVA.

M& L for Wiring for submain wiring alongwith with the 2 X 4 Sqmm + 1 x 4 Sqmm earth wire of FR PVC insulated copper conductor single core cable in surface / recess in PVC Conduit etc. complete all as specified and directed.

Supplied and fix rigid non metallic PVC conduit exclusive of boxes but inclusive of all tees,bends,elbows, reducers,bell mouth tube ends and fixing accessories such as coupler ,lock ,nuts etc of size 20 mm complete all as specified and directed.

Sheet metal enclosure with socket plug top for single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 240 volts all as specified.

S & F or passing through pipe, 1100 Volts grade heavy duty flat 10 Sqmm 2 core stranded conductor with PVC insulated aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed in service connections complete all as specified and directed.

S&F GI tubing 25 mm bore light grade as protection pipe complete all as specified and directed

MOHAMMAD NABI HUSSAIN (BID ID -3507926)

DEBAJYOTI DAS (BID ID -3506947)

M/S CHANDAN ENTERPRISE (BID ID -3507406)

M/s GOURAB JYOTI GOGOI (BID ID -3507822)

Bipul Gogoi (BID ID -3507755)

Saranga Saikia (BID ID -3507656)

KULA PRASAD GOHAIN (BID ID -3507316)

SAHASRA CONSTRUCTION (BID ID -3507325)

M/S Raju prasad (BID ID -3507620)