MISC. CIVIL, ELECTRICAL AND STRUCTURAL WORKS

Non FLP lighting fix72W LED — n flame proof Integral flood lighting fixture (for 72W LED) on building/ structure/pole,watch tower etc. lighting fixture type :LS -72-CDL of M/s CG make or equivalent. Rate includes supply, clamping, wiring, installation, commissioining of lighting fixtures. The lamp should have capability to rotate and revolve. The security guard should able to operate easily. Switch panel to be IP rated to provided near tower with canopy.

Paver blocks 60MM — pplying and placing in position as per approved pattern of Cement Concrete Inter locking/grass jointed paver block 60 mm thick of ap oved shape, rough finish, M- 30 strength of approved brand laid over the sand bed of minimum 50 mm thick. The CC interlocking blocks be of uniform Grey colour or as approved by EIC complete in all respects as per scope of work, detailed construction drawings, tech cal specifications and directions of the Engineer-in-charge.Note:1. Rate to include cost of all labour, tools, tackles, equipmen hire charges, supply of all materials such paver blocks, sand, earth work in excavation in cutting earth in all conditions, shutter g with all bye works and sundry works.2. PCC below paver shall be paid separately vide respective item.

Brick Work — oviding and laying BRICK WORK straight or curved on plan to any radius using best quality bricks with frog/indent, conforming to sub lass A as per IS:1077 having crushing strength of not less than 50 kg/cm2 in cement mortar 1 :4 (1 Cement : 4 Coarse Sand) in all ty s of foundation and superstructure at all depths/heights including projections, pillars, parapets,drains, supports, paver block kerb ornamentals of any shape, cornices, all complete including cut work, curing, scaffolding,including filling of joints with Cement Mo ar 1:6 and racking of joints, etc. as per specifications, drawings and directionsof the Engineer.Note:Rate to include cost of l labour, tools, tackles, equipment, hire charges, supply of all materials such as minimum 43 grade cement (OPC/PPC), bricks, finish , bitumen, other minor construction materials, shuttering, staging, masonry work, painting with bitumen on faces in contact with soi etc. as per requirement with all bye-works and sundry works complete as per drawings.

Aluminium works — oviding and fixing windows, ventilators, with extruded built-up standard tubular / appropriate Z sections or any other sections of J DAL/ HINDALCO, conforming to IS: 733 and IS: 1285, fixed with approved quality rawl plugs and screws or with fixing clips or with ex nsion hold fasteners, including application of appropriate silicon based sealant between the aluminum frame and masonry/concrete fro both outside and inside to make the frame water tight. Aluminium sections shall be smooth, rust free, straight, mitred and jointed m hanically , wherever required including cleat angle and shall be anodized with minimum 20 micron thickness as per approved colour (a per IS:1868). (Minimum anodic coating shall be of grade AC15). The windows & ventilators shall be provided with flymesh. Aluminium s p beading for glazing / paneling, stainless steel screws and all standard accessories, hinges / pivots for shutter portion, fixing o standard window shutters to frames and also including fixing of frames to masonry openings with lugs/scre g g y p g g ws mastic etc. PDM / Neoprene gaskets between frames / beadings and glass to make the glazing water tight etc. complete with all bye works includin fitting of stays, push-plates, bolts, handles, lock(for ticket windows),6 lever lock, 2mm thick rubber gaskets around, etc. as per nufacturer’s specifications, drawings, direction and to the satisfaction of the Architect / Site in charge. Fixed and openable porti , fixed to frame size min. 101.6mm X 44.45mm x 2.01mm, weight 1.605 kg/m (approx.) and 63.5mm x 38.1mm x 1.5mm, weight 0.861 kg/m mi as per requirement. Sliding shutters fixed to frame size 92mm X 31.75mm x 1.5mm min. & weight 1.060 kg/m min and 61.85mm x 31.75mm 1.5mm, wt. 0.784 kg/m min as per requirement. Shutter side, bottom and interlock shall be 40mm x 18mm x 1.55mm wt. 0547kg/m min., as er approved drawing and as per approved manufacturer’s detail. Frame for grill shall be 63.5mm x 38.1mm x 2mm & wt. 1.054kg/m. Provi ng and fixing Doors with 8.0mm minimum thick float glass panels/ double side prelaminated particle board flat pressed three layer or raded wood particle board bonded with BWP type synthetic resin adhesive as per IS : 848 and pre-laminated conforming to IS: 12823 Gr e l Type ll, in paneling fixed with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions o E-I/C with decorative lamination on both sides of approved make; frames of size 101.6mm x 44.45mm x3.18mm minimum, weight 2.541 kg/m in(approx.) for fixed part & for Operable portion (section size minimum 47.62mm x 44.45mm x 3.18mm x 10.16mm, weight 1.501 kg/m min. All doors shall be provided with high strength & high quality frame, hinges, aldrops, grip handles, door stoppers, mortice deadlock tower bolts etc to complete the job in all respect. Scope includes supply & providing door with frame, suitable locking assembly and ll other accessories except floor spring & door closure to complete the job in all respect. Measurement: Area of door excluding fram shall be considered for payment. This item will be operated for aluminium doors, windows, partitions etc. Including fittings, hinges rubber beadings, locks, aldrops etc. complete in all respect up to the satisfcation of client. Weight of only alumnium section will taken for payment, glass shall be paid extra as per other item.

CPVC Exposed works — oviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes of approved make having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge - Exposed rk. Thickness of pipe to be from 32 mm. Hydrotesting of the pipes to be done as per engineer-in-charge to check for any leakage from he pipes.

CPVC Concealed works — oviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 32MM of approved make having thermal stability for hot & cold water s ply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes join ng of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. - Co ealed Work including cutting chases and making good the walls etc. No extra payment to be done for plastering and painting over the ases cut for installation of the CPVC pipes. Hydrotesting of the pipes to be done as per engineer-in-charge to check for any leakage rom the pipes. Rate to include cleaning of any debris created by cutting of walls

RCC Cover slab — oviding, hoisting and fixing up precast reinforced cement concrete of M-30 grade (20mm nominal size) in trenches, pits, tanks and th like including the cost of required centering, shuttering (with smooth surface) complete but excluding cost of reinforcement. Min. r nforcement to be single grid of 2-way 10mm Fe-415 @ 200 c/c. Minimum grade of concrete to be M-35. Payment shall be made on the cub. ters of concrete slab laid.Rate to include levelling of the surface where concrete slab is to be put, cleaning of the area, cleani of drain if the slabs are to be placed over drain. Frame to be made from MS plate 5mm thickness and inside that the slab will be ca ed.

RCC Non-Pressure Pipe(NP3) of 1045-BPPL BARMER — oviding,laying and joining RCC non pressure pipes of NP3 class of 300mm diameter including collars jointed with stiff mixture of cem t mortar 1:2 (1 cement : 2 fine sand), curing, aligning, joining and testing etc. to correct slope including excavation, backfilling t all depths as per drawings with all bye works complete as per specification and directions of Engineer. Cost of PCC bedding, encas g etc.are not included in the scope of this item and shall be measured and paid seperately.

RCC Non-Pressure Pipe(NP2) of 1045-BPPL BARMER — oviding,laying and joining RCC non pressure pipes of NP2 class of 150mm diameter including collars jointed with stiff mixture of cem t mortar 1:2 (1 cement : 2 fine sand), curing, aligning, joining and testing etc. to correct slope including excavation, backfilling t all depths as per drawings with all bye works complete as per specification and directions of Engineer. Cost of PCC bedding, encas g etc.are not included in the scope of this item and shall be measured and paid seperately.

Boulder Soling/Stone Pitching — oviding and laying stone boulder soling with stone boulders of size 80-125 mm including packing filling interstices with smaller siz stones dry and wet consolidition with moorum as coarse aggregate in, trenches,pavements including ramming, consolidating with mechan al means and tamping etc. completed as directed at the site (Compacted thickness shall be measured for payment). Payment shall be ma in square meters of actual area covered by the stone pitching. Rate to include closing of joints with 1:4 cement mortar. Item to be sed on sloping soil covers, open ground areas etc. as per the directions of engineer-in-charge. Thickness to be of 230-250mm. Rate t include pointing and painting white cement over pointing.