REPAIRS TO TIP UP CHAIRS, WOODEN FLOORING, WALL PANELLING, SAND MODEL PITS, FALSE CEILING AND MISC WORKS ETC AT DSSC WELLINGTON

Amount

S & F in repairs / patch work rexine cloth not less than 1.70 mm thick (48" wide) with RM material cost not less than Rs. 250/- per RM and colour matching with existing and pasting with approved adhesive and stitching as required in existing tip up chairs all as approved and as directed.

S & F in repairs 12 mm dia anchor fastener of length 50 mm and making hole as per size of bolt in legs of tip up chairs for fixing rigidly and making good flooring all as specified and as directed.

M & L for one coat of melamine polishing on old wooden surfaces including necessary preparation of surfaces complete all as specified and as directed.

M & L for removing the existing old disturbed tip up chairs and taking out the damaged wooden runners and grouting with CONBEXTARA GP 2 or equivalent as approved by GE, general purpose for free flow high strength non shrink cementious grouting material using mechanical agitator all as per manufacturer's instruction including embedding 8 mm dia fastener purpose made anchor bolts and refixing the chairs in position all as specified and as directed.

M & L for one coat of synthetic enamel painting including preparation of surfaces on steel surfaces of tip up chairs ( for leg portion and hand rails) all as specified and as directed.

M & L for French polishing on wooden surfaces of any description, width or girth including cleaning and preparing the wooden surfaces over a coat of wood filler on old work one or more coats to a glossy finish all as specified and as directed.

M & L for servicing of chairs such as loose of nut, bolt, screws including missing nut, bolt to be fitted as required and making serviceable all as specified and as directed.

S & F in repairs Tip up heavy duty chair fixed to floor with suitable adhesive and expansion bolt etc., (anchor fasteners shall be not less than 10 mm dia and length 120 mm) all as specified and as directed.

S & F in repairs seat for tip up chairs of density 40 g /Sqcm as specified and as per sample existing (approx size 22" x 22" x 4 " thick ) all as approved and as directed.

S & F in repairs back for tip up chairs of density 32 g /Sqcm as specified and as per sample existing (approx size 22" x 22" x 4 " thick ) all as approved and as directed.

M & L for linoleum plain coloured floors of 2 mm thick (matching with existing) sealed down with an approved adhesive all as specified and as directed.

Removing the existing old disturbed tip up chairs seat/back and taking out the damaged inside material like foam, plywood etc., including removing and fixing of rexine, refixing the same in position all as specified and as directed.

Taking down Chowkats or frames n.exc 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.

Taking down Chowkats or frames exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.

S & F second class hard wood (Sal) plain, solid, straight as in chowkat and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S & F for 35 mm thick second class hard wood plain, framed, panelled shutters ( any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, etc are provided with stiles and rails as specified in SSR Pt I Section 8, Clause 8.24 (a) complete all as specified and directed.

S & F 30 mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., for windows and ventilators, etc are provided with stiles and rails as specified in SSR Pt I Section 8, Clause 8.24 (b)complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used & edges will be painted to match with printed sheet reinforced with MS square tube all as specified and directed.

S & F factory made solid PVC moulded door shutter with particle board core , 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2 mm plain coloured PVC sheet on back face in the frame at site as per specification & drawing complete all as specified and directed.

S & F in repairs for 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

S & F in repairs 200 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S & F in repairs 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S & F 100 mm long medium weight, cold rolled mild steel Butt hinges, ISI marked, complete all as specified and as directed.

S & F mild steel angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles confirming to Fe 290 Gde-E-165 complete all as specified and as directed.

S & F mild steel work as in framed work such as grills, gratings, framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 290 Gde E-165 complete all as specified.

M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and as directed.

Taking down aluminium door/ partition including glass / particle board all as specified and directed

S & F anodised aluminium door/ windows/ partition etc., with one or more rebates using suitable size standard aluminium sections including jointing cleat, glazing clips, rubber neoprene packing including necessary accessories like handles, hinges etc complete all as specified and directed.

S & F in repairs for 12 mm thick prelaminated particle board of interior grade, preliminated on one side decorative choice lamination & other side balancing white lamination, fixed to aluminium/ timber frame work complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal/ aluminium frames including punching or drilling out old glazing pins/ spring clips complete all as specified and directed.

S & F 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty/ aluminium rubber beading in squares exc 0.5 Sqm in each pane complete all as specified and as directed.

S & F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and as directed.

M & L for repair of aluminium door shutters of any size, including taking down, re-setting easing, fixing of cleats, screws, nuts, bolts, door closers, hold fasts, aluminium door stopper, change of PVC rubber beadings, repair for smooth functioning of door complete all as specified and as directed.

M & L for repair of UPVC door shutters, including taking down, re-setting , screws, nuts, bolts, door closers, hold fasts, change of PVC rubber beadings, repair for smooth functioning of door complete all as specified and as directed.

Taking down UPVC door/ window and partition all as specified and as directed.

M & L for Granite stone slab flooring 16-18 mm thick any colour/shade machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing;rounding edges as required, laid over and including 15mm thick screed bed in CM (1 :6) complete all as specified and as directed.

M & L for white/coloured UPVC ventilators complete all as per manufacturer's direction and following specifications all as directed:- (i) UPVC ventilator frame shall be fixed made of PVC material confirming to IS 10151, the frame shall be made of extruded UPVC section having over all dimension of 48 x 40 to 42 x 50mm having wall thickness 2mm ± 0.2mm. (ii) Corners of wall frame shall be jointed by MS galvanized brackets mitred and plastic welded the hinge side vertical outer frame shall be reinforced with galvanized MS tube of wall thickness 1 mm + 0.1 mm and the tie rod shall be provide at the bottom of the frame. (iii) The profiles should be three chamber system which shall provide high insulation properties. (iv) All the hardwares like friction stays, handles should be screwed with self tapping screws. (v) Glazing system should be glazed with 5mm thick plain glass/louvers fixed in ventilator frame and all as per manufacturer's instructions and as directed. Make: Madhu Industries / AMD Overseas Ltd / Gadli Industries/ Simta Astrix

M & L for white/Coloured UPVC sliding Windows with glazing all as per manufacturer's direction and following specifications as directed :- (i) UPVC Window frame shall be made of PVC material confirming to IS 10151, the window frame shall be made of extruded UPVC section having overall dimension of 105 x 60 having wall thickness 2.5 mm ± 0.2 mm . Corners of wall frame shall be joined by MS galvanized brackets. Joints shall be mitred and plastic welded . The hinge side of vertical outer frame shall be reinforced with galvanized MS tube of wall thickness 1 mm ± 0.1 mm and the tie rod shall be provide at the bottom of the frame. (ii) The profiles should be three chamber (three track) system which shall provide high insulation properties. (iii) Glazing shall be provided with 6mm thick toughened glass fixed with approprite size beading as per manufacurer's specifications. (iv) Stainless steel wire mesh 0.36mm nominal dia and average width of aperature 1.40mm shall be provided with each window shutter. Make : Madhu Industries /AMD overseas Ltd/ Gadli Industries/ Simta Astrix

M & L for White/Coloured UPVC door all as per manufacturer's direction and following specifications all as directed :- (i) The profile for costruction of UPVC door shall be of overall size 60 x 58 mm with wall thickness 2.7 ± 0.2 mm extruded sections. (ii) The corners shall be plastic welded. (iii) The hinge side of vertical outer frame shall be reinforced with galvanized channel of wall thickness 1.2 mm ± 0.1 mm. (iv) The door shall be fixed to walls using 8 mm dia 80 mm dia MS screws minimium 3 Nos on each side. (v) The top portion of door shall be provided with plain /frosted glazing of 6 mm thick fixed to doors gutter with UPVC standard beadings of 24.5 x 16 mm of 2 mm thick. (vi) The bottom portion of door for 1 m height shall be provided with UPVC hollow board not less than 6 mm thick. (vii) The door shall be provided with :- (a) Moritise lock of brass size minium 100mm four lever with two keys as per manufacturer's specification. (b) Two Nos of fan light pivot size 170mm on one shutter. (c) 03 Nos of 3D hinges on each shutter. (viii) All the fittings shall be provided with using self tapping screws. Note: The entire fixing will be done as per manufacturer's instructions and specification and as directed. Make: Madhu Industries / AMD Overseas Ltd/ Gadli Industries / Simta Astrix.

M & L for White/Coloured UPVC partition complete all as per manufacturer's instructions and following specifications all as directed:- (i) UPVC partition frame shall be made of material confirming to IS 10151 of extruded UPVC section having over all dimension of 65 x 55 having wall thickness 2mm ± 0.2mm. (ii) Corners of frame shall be jointed by MS galvanized brackets mitred and plastic welded. (iii) The profiles should be single chamber system which shall provide high insulation properties. (iv) Glazing shall be 6mm thick frosted glass fixed in frames with appropriate beading as per manufacturer's specification. (v) The bottom portion of partition for 1 m height and above 2.1m hight shall be provided with UPVC hollow board not less than 6 mm thick. Make: Madhu Industries / AMD Overseas Ltd/ Gadli Industries/ Simta Astrix.

S & F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing ports made of brass , other parts made of mild steel heavy duty and finishing the disturbed surface to match with existing finish complete all as specified and directed.

S & F in repairs door closer hydraulically regulated, aluminium cast body designation No. 2, universal type, suitable for door shutters including all accessories all as specified and as directed.

S & F brass mortice lock vertical type size 100 mm 4 levers all as specified and as directed.

Dismantling timber scantlings 40 Sqcm and over in section, in any position, framed work all as specified and as directed.

S & F second class hardwood scantlings, clean sawn timber framed work all as specified and as directed.

M & L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and as directed.

M & L in repairs for 1213mm x193mm x 8mm thick of any size laminate wooden flooring having abrasion class AC4/ class 32 with interlocking system and corner and edges profiles over 1mm thick plastic sheet and 2mm thick form laid complete all as per manufacuturer's instructions and as directed. Make : Trott /Inovar Floor India Pvt Ltd.

Dismantling wall and ceiling board (fibre, pulp, insulation etc.,) or insulation board /slab /blanket any thickness including cover fillets all as specified and directed.

M & L in repairs for gypsum board false ceiling 12mm thick fixed with standard GI frame work with GI fixing channels of 16 gauge, main "U" shaped channels @ 1220mm c/c and inter connected cross channels "C" shape spaced at 610mm c/c, the main fixing channels shall be fixed through GI cannels suspenders from theroof @1200c/c, main and inter connected channels shall be fixed through fasteners clips as per manufacturer's instructions, with and including plaster of paris decorative type cornices all around at the junction of wall and ceiling etc., and shall be applied with two coats of plastic emulsion paint over a coat of primer all as specified and directed.

M & L for repair only gypsum board false ceiling 12mm thick with including plaster of paris decorative type cornices all around at the junction of wall and ceiling etc., and shall be applied with two coats of plastic emulsion paint over a coat of primer all as specified and as directed.

M & L in repairs for modular false ceiling systems in ArmGym-FB for Vinyl face, washable metallized polyester foil backing vinyl covered edges of 9mm thick of calciumsilicate material of size 595mm x 595mm GRG ceiling tiles shall have weight 7 Kg /Sqm and fixed with bottom face powder coated suspension system (Grid). The size of the same is 15mm x 32mm. The galvanized iron sheet of thick 0.30 mm used in the manufacturing of grid is zinc coated for preventing corrosion. The main runners are hung from the soffit with help of GI wire hanger complete with installation all as per manufacturer's instruction and as directed by Engr-in-Charge. Note :- Rate for fixing the ceilling upto 10mtr height deemed to be included in quoted rate by the contractor. Make: Armstrong/ Diamond/ Saint Gobain.

M & L for repair only modular false ceiling board 9mm thick of calciumsilicate material of size 595mm x 595mm GRG ceiling tiles shall have weight 7 Kg /Sqm all as specified and directed. Note :- Rate for fixing the ceilling upto 10mtr height deemed to be included in quoted rate by the contractor. Make: Armstrong/ Diamond/ Saint Gobain.

M& L for cutting chases in stone walls, pinning in, making good to facing where required and pointing in CM (1:3) to ends of edges of landing steps, cills, sunshades, shelves, lintels, etc ; and cutting chases for concealed water tubing or concealed conduit wiring , etc, and making good cutting not exc 10 cm girth all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or accounted under schedule of credit all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or accounted under schedule of credit all as specified and as directed.

S & F 20 mm bore galvanized steel tubes, medium grade with all fittings for water supply pipes etc., fixed to walls and ceilings or laid in floors all as specified and as directed.

Fixing only 20 mm bore old steel tubing and connections in new or old position (walls and ceilings or laid in floors, concealed etc.,) all as specified and as directed.

S & F 15 mm bore galvanized steel tubes, medium grade with all fittings for water supply pipes etc., fixed to walls and ceilings or laid in floors all as specified and as directed.

Fixing only 15 mm bore old steel tubing and connections in new or old position (walls and ceilings or laid in floors, concealed etc.,) all as specified and as directed.

S & F in repairs 20 mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Dismantling water tank of capacity exc 500 ltr & n.exc 1000 ltr, removing to store and necessary amount accounted in Sch of Credit complete all as specified and directed.

S & F triple layered rotational moulded polythene water storage tanks, 1000 Ltr capacity, cylindrical, vertical with closed top, hoisted and fixed in position including supply and fix 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed all as specified and as directed.

S & F triple layered rotational moulded polythene water storage tanks, 500 Ltr capacity, cylindrical, vertical with closed top, hoisted and fixed in position including supply and fix 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed all as specified and as directed.

S & F in repairs 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min. wt 20mm-210gm) all as specified and as directed. Make : Prayag/ Polytuff.

S & F in repairs PVC tank cover suitable for 500 /1000 Ltrs capacity complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line overall as fixed along the centre line over fittings and accessories) all as specified and as directed. Note :- Rate for taking down of the gutter upto 10 mtr height deemed to be included in quoted rate by the contractor.

S & F 110 mm PVC (SWR) WC connector bent type complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) pipes of pressure rating 6 Kg/ Sqcm, type 'B', single socketed in any length with rubber ring joints fixed to walls with suitable connecting accessories all as specified and as directed.

S & F 75 mm bore PVC (SWR) pipes of pressure rating 6 Kg/ Sqcm, type 'B', single socketed in any length with rubber ring joints fixed to walls with suitable connecting accessories all as specified and as directed.

S & F 110 mm bore PVC (SWR) bends of any radius with access doors complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and as directed.

S & F in repairs vitreous china qquatting pan "Orissa pattern" long pan, size 580 x 440 mm white ,with `P' or `S' trap, front or back inlet and foot rests any pattern including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including concrete including making good to floor surfaces all as specified and as directed.

S & F in repairs vitreous china wash down water closet pan (pedestal pattern) white including all accessories and connection complete all as specified and directed.

S & F in repairs 10 litres capacity PVC valveless , syphonic action type, flushing cistern low level, white , with inlet, ball valve, float and handle including brackets all as specified and as directed.

S & F in repairs vitreous china half stall urinal white complete including providing and fixing plugs, bedding urinal against wall in CM (1:2), securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.

S & F in repairs vitreous china clay WHB flat back size 550 x 400 mm including PVC waste pipe 32 mm dia, waste coupling brackets etc complete all as specified and directed.

S & F in repairs wash down water closet pedestal pattern cascade with dual flushing cistern all as specified and directed. Make : Parryware (Popular) Cat No: C0232/86 for Closet , Cat No : C0711 for Cistern, Cat No : C02054 for Cistern Lid , Cat No : C8300 hush seat cover & Cat No : C8016 for fittings or equivalent in Jaquar /Cera/ Hindware.

S & F in repairs urinal mangnum half stall type including spreader all as specified and as directed. Make : Parryware (Popular) Cat No :C 8097 integrated EFC AC with power source or equivalent in Jaquar/ Hindware/ Cera

S & F in repairs WHB round bowl type counter top of size 550 x 445 mm coloured with pillar cock fixed, laid over and including 18 mm thick polished granite slab of size 900 x 600 mm including necessary cutting, polishing, rounding the edges all as specified including pillar tap of fancy type complete all as specified and as directed. Make for WHB Counter top: Parryware, Cat No : C0431 (Popular) or equivalent in Jaquar/ Cera/ Prayag/ Hindware and Make for pillar tap : Jaquar, Cat No : KUB-35001F or equivalent in Prayag/ Parryware/ Hindware/ Cera.

S & F in repairs superior quality push button taps of cast copper alloy CP , screwed for 15 mm bore iron pipe all as specified and as directed. Make : Parryware, Cat No : T9951A1 or equivalent in Prayag/ Jaquar/ Cera/ Hindware.

S & F in repairs CP health faucet with 1.5 mm tube and hook along with CP multi bip taps 15 mm bore all as specified and directed . Make for Health Faucet: Prayag, Cat No : BEA-41 or equivalent in Jaquar/ Hindware/ Cera/ Parryware & Make for Bib tap: Jaquar, Cat No : QQT-7041 or equivalent in Cera/ Hindware/ Prayag/ Parryware.

S & F in repairs LED mirror with touch switch on size of 800 x 600 mm with 5 mm thick glass mirror with touch switch for LED light, light weight aluminium back box carying entire unit, double coat for production and longevity and silver plating on the back for better reflection all as specified and directed. Make : Cera, Cat No : B3530103 or equivalent in Jaquar/ Havells/ Luker

S & F in repairs looking mirror of any size using 6 mm thick mirror edges rounded fixed with SS clips including necessary frame work in SS tubes all as specified and as directed.

S & F in repairs 15 mm bore Bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed.

S & F in repairs 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and as directed.

S & F in repairs 15mm dia angle cock concealed cast copper alloy fancy type all as specified and as directed. Make : Jaquar, Cat No : CON 059KN or equivalent in Prayag/ Parryware/ Cera.

S & F in repairs 15 mm bore pillar tap, cast copper alloy, fancy type , with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot' or Cold' with long screwed shanks and fly nuts, screwed for iron pipe all as specified and as directed.

S & F in repairs CP toilet paper holder fixed to wall with chromium plated brass screws all as specified and as directed. Make : Jaquar, Cat No : AKB 35751 or equivalent in Cera/ Prayag/ Parryware/ Hindware.

S & F in repairs stainless steel soap dish complete all as specified and as directed. Make :Jaquar, Cat No : AEC 1131 or equivalent in Parryware/ Cera/ Prayag.

S & F in repairs CP towel rail 600 mm long all as specified and as directed. Make :Jaquar, Cat No :CAN- 1111 N or equivalent in Cera / Parryware / Hindware/ Prayag

S & F in repairs CP towel ring square complete all as specified and as directed. Make : Jaquar, Cat No : 1121 N or equivalent in Cera/ Prayag/ Parryware/ Hindware

S & F in repairs for hand drier automatic type all as specified and directed. Make : ABS hand drier KH07 or Kallerians or equivalent in Cera/ Jaquar/ Parryware

Demolition of stone slabs and tiles of any description or thickness in floors, laid bedded and pointed in any mortar complete all as specified and as directed.

Demolition of un-reinforced cement concrete in ground floors for levelling of and pavings n.exc 15 cm thickness including floor finish complete all as specified and as directed.

M & L for providing 25 mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in floor, finishing cement concrete surfaces even & smooth using extra cement complete all as specified and directed.

M & L for vitrified ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M & L for vitrified ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 Sqm in vertical surfaces like skirting, dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including rendering/ backing coat of 10 mm thick in CM (1:3) complete all as specified and directed.

M & L for vitrified ceramic tiles light shade10 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M & L for vitrified ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 Sqm in vertical surfaces like skirting, dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including rendering/ backing coat of 10 mm thick in CM (1:3) complete all as specified and directed.

M & L for Granite tile flooring 10 mm thick machine cut, rounding edges, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, laid over and including 15mm thick screed bed bedding in CM (1:4) complete all as specified and as directed.

M & L for Granite tile flooring 10 mm thick machine cut, in vertical surfaces like skirting/dado etc., laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, laid over and including rendering as backing coat of 10 mm thick in CM (1 :3) complete all as specified and as directed.

M & L for Granite stone slab flooring of approved colour 16-18 mm thick machine cut, rounding edges , leather finished, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone, laid over and including 20mm thick screed bed in CM (1 :4) complete all as specified and directed.

M & L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm screed bed in CM (1:4) complete all as specified and directed.

M & L for non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm screed bed in CM (1:4) complete all as specified and directed.

M & L for coloured glazed ceramic tiles of size 350 x 250 x 7 mm / 450 x 350 x 7 mm thick, in vertical surfaces such as dado/ skirtings etc, set jointed in neat cement slurry & pointed in white or coloured cement to match, laid over and including rendering as backing coat of 10 mm thick in CM (1 :3) complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.,and removing unserviceable debris off the premises all as specified and as directed.

M & L for rendering 15 mm thick in CM (1:4) mixed with WPC as per manufacturer's instruction on fair faces of brick work/ concrete surfaces, finished even and smooth without using extra cement all as specified and as directed. Note : WPC shall be measured and paid separately.

M & L for rendering 15 mm thick in CM (1:6) mixed with WPC as per manufacturer's instruction on fair face of brick/concrete surfaces and finished even and smooth without using extra cement all as directed. Note : WPC shall be measured and paid separately.

Supply only liquid water proofing compound all as specified and as directed.

M & L for preparation of new decorated surfaces and applying two coats of acrylic emulsion exterior grade on wall over a coat of primer complete all as specified and as directed.

M & L preparation of new decorated surfaces and applying two coats of distemper oil emulsion over a coat of putty finish and a coat of alkaline resistant primer complete all as specified and as directed.

M & L for applying one coat of distemper oil emulsion on old decorated surfaces of walls including preparation of surface by washing, rubbing down and stopping of distempered surfaces all as specified and directed.

M & L for preparation of old surfaces and applying one coat of acrylic emulsion exterior grade on wall complete all as specified and as directed.

M & L for complete removal of existing treatment on wall by scrapping , washing, rubbing down and stopping of distempered and applying two coats of oil bound distemper over a coat of primer over wall care putty on walls all as specified and directed.

M & L for complete removal of existing treatment from old plastered surfaces of ceilings and walls and applying two coats of Asian paints Royale Shyne paint (coloured/white) or equivalent in Berger Paints/ Nerolac Paints/ Shalimar Piants over a coat of deco prime primer over and including one coat of wall care putty with brush/roller, finished even and smooth complete all as per manufacturer's instruction and as directed by GE.

S & F UPVC door lock vertical type any size four lever with two key all as specified and directed.

S & F 4 mm thick sheet glass ordinary quality and glazing wooden fillets /rubber beading in squares all as specified and as directed.

S & F galvanised steel wiremesh 1.4mm dia fixed with tinned tacks of tinned tacks of wire staples size of mesh 12mm all as specified and as directed.

HRML CONSTRUCTIONS

S.RAMACHANDRAN