Civil Work

Amount

Supply and wiring with 3 x 1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate and making good of the concealed portion with suitable colour for concealed PVC pipe stair case light point. Lower End

Supply and wiring with 2 x 4 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire with painting of suitable colour.

Supply and wiring with 2 x 2.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour.

Supply and wiring with 2 x 1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 1.5 sq.mm copper wire with painting of suitable colour.

Supply and fixing of 1 no, 32A DP MCB with suitable double pole sheet steel encloser in flush with wall with necessary connection

Supply and fixing of 100W LED Highbay Havelles make fitting on wall or ceiling with suitable clamp and necessary connection.

Supply and fixing of 1no.6A two module 5 pin socket, 1 no. 6A one module switch on suitable module surface mounting box (GI) with module cover plate (plastic) on wall with connections. Lower End

Supply and fixing of 1no.6/16A two module socket, 1 no. 16A one module switch on suitable module surface mounting box (GI) with module cover plate (plastic) on wall with connections. Lower End

Supply and fixing of 3 nos.6A two module 5 pin socket, 3 nos. 6A one module switch on suitable module surface mounting box (GI) with module cover plate (plastic) on wall with connections. Lower End

Supply and fixing of 20A Flush typeWall Socket 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mmx 50mmx 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and Run of 1 of No.8 SWG copper wire for earth connection

Supply, Testing, Commissioning and Handing over of 1No 125 KVA Diesel Generator set of 0.8 P.F. Three Phase 415/420 Volts, 50 C/S, 1500 RPM CPCB Approved capacity compressing of Engine BHP/ suitable BHP of water cooled clock wise rotating feed pump with 110KW/125KVA operating capacity brush less alternator close coupled undermeath fuel tank standard, safeties, LLOP with stop solenoid, battery with lead, Electric start and vibration fitting & accessories and AMF control panel as detailed below including transporting of unloading changes. (A). application with a shaft output suitable at 1500 RPM under NTP conditions. The Engine shall comprise the following standard fitting flexible coupling, fly wheel air cleaner, fan blower, radiator, water pump, fuel pump, fuel filter lubricating oil filter etc., Complete with starter motor, dynamo, standard batteries with cable, flexible exhaust piping of 50 cms length. (C) ENGINE INSTRUMENT PANEL/MOUNTED: Starting push button/ staring key, lubricating oil temperature gauge, lubricating oil pressure gauge, water temperature gauge, safety control for low lubricating oil pressure, safety control for high water temperature, safety control for over speed, hour meter (mechanical) and RPM indicator, battery charging ammeter.

Charges for supply and fixing of Control Cable suitable for 125KVA DG set

Supply and Erection of 415V/50Hz 250A Cubical Panel board with centre bus bar chamber and switch chamber on both side of the bus bar chamber and cable chamber on extreme end with 16SWG Thick CRCA Sheet with 1"x1/4" tinned copper flats for 3 phases and neutral with 6mm Hylem sheet separation of 3 phases and neutral and with synthetic moulded Insulators bus suppot at equal intervals as per IS Specification and 2 runs of 1" x1/8" Copper flat on rear side of the panel board for earth buses and with 0-500V Multifunction Display (Make L&T Make L&T MFM 5010series CI with 0.2 RS 285) on a separate chamber and with the following 1.250A Triple pole 2.100A Triple pole (MCCB Switches switches complete MCCB 36KA Switch -1 No MCCB 36KA Switch-10 Nos L&T Make /equivalent) with 2 Nos Metallic Danger Board with powder coated painting, necessary Identification of out going loads, bus capacity cable size with bold letter

Supply and Erection of 415V/50Hz 200A Cubical Panel board with centre bus bar chamber and switch chamber on both side of the bus bar chamber and cable chamber on extreme end with 16SWG Thick CRCA Sheet with 1"x1/4" tinned copper flats for 3 phases and neutral with 6mm Hylem sheet separation of 3 phases and neutral and with synthetic moulded Insulators bus suppot at equal intervals as per IS Specification and 2 runs of 1" x1/8" Copper flat on rear side of the panel board for earth buses and with 0-500V Multifunction Display (Make L&T Make L&T MFM 5010series CI with 0.2 RS 285) on a separate chamber and with the following switches complete 1.200A Triple pole MCCB 36KA Switch -1 Nos 2.40A Triple pole MCCB 36KA Switch-11 Nos (MCCB Switches L&T Make /equivalent) with 2 Nos Metallic Danger Board with powder coated painting,necessary identification of out going loads, bus capacity cable size with bold letter

Supply and Erection of 415V 50HZ Cubicle CT Meter Panel Board with Three Compartment Like Meter Compartment, TTB Compartment and Busbar and CT Compartment for Hanging the EB CT Meter with 16 SWG Thick CRCA Sheet with 1"x 1/4" tinned Copper Flats for 3 Phases and Neutral with Synthetic moulded insulators bus supports at Equal Intervals as per IS Specification and 2 Runs of 1" x 1/8" copper flat on rear side of the Panel board for earth bus and with 3 NOs of CT Coils of 4.5cm, inner Dia with Ceiling Provision with a ratio of 200A/5A and with Necessary Hylem Sheets on Inner Side of Each Compartment.

Supply and fixing of 200A Enclosed ATS with Frame 2 suitable for aluminium termination with under and over voltage protection with double break Contact system offering High short time withstand (Icw)

Supply and fixing of TNEB Meter Board for 3 phase 200A Service connection made up of suitable angle iron framework of size 3 ft x 2ft using angle iron of size 11/2"x11/2"x1/4" rigidly fixed on wall covered with hylem sheet of size 3 feet x 2feet of 12mm thickness with necessary bolt and nut support and supply and fixing of 3 Nos 200A fuse unit (500V),1 No neutral link, copper earth flat of size 1"x1/4" with interconnection of EB Meter to fuse unit by 19/16 PVC Insulated Copper wire with earth connection complete

Supply and fixing of M.S Stand for fixing of Outdoor AC Unit

Supply and Laying of 5/8” and 3/8” copper pipe with necessary installation complete

Supply and Laying of 1” PVC Heavy Duty Drain Hose with Suitable M.S.Clamps on wall complete

Supply and clarnping of 3-1/2 x 50 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps (For Lift)

Supply and frxing of brass cable gland for 3-1/2 x 50 sq.mm. PVC armoured LTUG cable with earth connection (For Lift)

Supply and providing cable end termination of 3 -1/2 x 50sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (For Lift)

Supply and run of 25 mm x 3 mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection (For Lift)

Provision of Plate Earthing as per the ISI specification with an earth electrode of 2.10 meter calss 'B' GI pipe of dia not less than 40mm with copper earth plate (For Lift)

GST at 18%

Sathyanarayana Electricals (BID ID -1549419)